! $Id: ESMF_AlarmUTest.F90,v 1.67 2011/06/30 05:59:24 theurich Exp $ ! ! Earth System Modeling Framework ! Copyright 2002-2011, University Corporation for Atmospheric Research, ! Massachusetts Institute of Technology, Geophysical Fluid Dynamics ! Laboratory, University of Michigan, National Centers for Environmental ! Prediction, Los Alamos National Laboratory, Argonne National Laboratory, ! NASA Goddard Space Flight Center. ! Licensed under the University of Illinois-NCSA License. ! !============================================================================== ! program ESMF_AlarmTest !------------------------------------------------------------------------------ ! #include "ESMF.h" !============================================================================== !BOP ! !PROGRAM: ESMF_AlarmTest - Test Alarm functionalities ! ! !DESCRIPTION: ! ! The code in this file drives F90 Alarm unit tests. ! !EOP !----------------------------------------------------------------------------- ! !USES: use ESMF_TestMod ! test methods use ESMF implicit none !------------------------------------------------------------------------------ ! The following line turns the CVS identifier string into a printable variable. character(*), parameter :: version = & '$Id: ESMF_AlarmUTest.F90,v 1.67 2011/06/30 05:59:24 theurich Exp $' !------------------------------------------------------------------------------ ! cumulative result: count failures; no failures equals "all pass" integer :: result = 0 ! individual test result code integer :: rc ! individual test name character(ESMF_MAXSTR) :: name ! individual test failure message character(ESMF_MAXSTR) :: failMsg ! instantiate a clock type(ESMF_Clock) :: clock1 type(ESMF_Alarm) :: alarm1 ! instantiate a calendar type(ESMF_Calendar) :: gregorianCalendar, julianCalendar, & no_leapCalendar, esmf_360dayCalendar ! instantiate timestep, start and stop times type(ESMF_TimeInterval) :: timeStep type(ESMF_Time) :: startTime, stopTime type(ESMF_Time) :: alarmTime #ifdef ESMF_TESTEXHAUSTIVE logical :: bool ! instantiate a clock type(ESMF_Clock) :: clock, clock2, clock3, domainClock, CLOCK_ATM logical :: alarmCountPass, isringing, sticky, enabled integer(ESMF_KIND_I8) :: forwardCount logical :: willRingNext, testPass, alarmsNotEqual, alarmsEqual type(ESMF_Direction_Flag) :: reverseDirection, forwardDirection type(ESMF_Alarm) :: alarm, alarm2, afterAlarm, beforeAlarm type(ESMF_Alarm) :: alarmList(201), alarmListOne(1) type(ESMF_Alarm) :: alarm6, alarm7, alarm8 type(ESMF_Alarm) :: alarm5(200), alarm3, alarm4 type(ESMF_Alarm) :: ALARM_HISTORY integer(ESMF_KIND_I8) :: reverseCount, iteration integer :: dd, nclock, ringCount, expectedCount, i, yy integer :: mm, m, h, sstep, nstep, nring, alarmCount ! instantiate timestep, start and stop times type(ESMF_TimeInterval) :: TIMEINTERVAL_HISTORY, alarmStep, alarmStep2 type(ESMF_TimeInterval) :: runDuration, ringDuration type(ESMF_Time) :: currentTime, currTime, afterAlarmTime, beforeAlarmTime type(ESMF_Time) :: alarmStopTime, nextTime, prevTime, currentTime2, time1 character(ESMF_MAXSTR) :: aName #endif ! initialize ESMF framework call ESMF_TestStart(ESMF_SRCLINE, rc=rc) ! initialize one calendar to be Gregorian type gregorianCalendar = ESMF_CalendarCreate(ESMF_CALKIND_GREGORIAN, & name="Gregorian", rc=rc) ! initialize secand calendar to be Julian type julianCalendar = ESMF_CalendarCreate(ESMF_CALKIND_JULIANDAY, & name="Julian", rc=rc) ! initialize third calendar to be No Leap type no_leapCalendar = ESMF_CalendarCreate(ESMF_CALKIND_NOLEAP, & name="NoLeap", rc=rc) ! initialize third calendar to be 360 day type esmf_360dayCalendar = ESMF_CalendarCreate(ESMF_CALKIND_360DAY, & name="360Day", rc=rc) !------------------------------------------------------------------------------- ! The unit tests are divided into Sanity and Exhaustive. The Sanity tests are ! always run. When the environment variable, EXHAUSTIVE, is set to ON then ! the EXHAUSTIVE and sanity tests both run. If the EXHAUSTIVE variable is set ! to OFF, then only the sanity unit tests. ! Special strings (Non-exhaustive and exhaustive) have been ! added to allow a script to count the number and types of unit tests. !------------------------------------------------------------------------------- ! initialize clock time intervals and instants ! ---------------------------------------------------------------------------- !NEX_UTest ! Test Setting Time Step write(failMsg, *) " Did not return ESMF_SUCCESS" write(name, *) "Set Time Interval Initialization Test" call ESMF_TimeIntervalSet(timeStep, h=1, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !NEX_UTest ! Test Setting the Start Time write(failMsg, *) " Did not return ESMF_SUCCESS" write(name, *) "Set Start Time Initialization Test" call ESMF_TimeSet(startTime, yy=2003, mm=3, dd=13, & h=18, m=45, s=27, & calendar=gregorianCalendar, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !NEX_UTest write(failMsg, *) " Did not return ESMF_SUCCESS" write(name, *) "Stop Time Initialization Test" call ESMF_TimeSet(stopTime, yy=2003, mm=3, dd=24, & calendar=gregorianCalendar, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !NEX_UTest write(failMsg, *) " Did not return ESMF_SUCCESS" write(name, *) "Alarm Time Initialization Test" call ESMF_TimeSet(alarmTime, yy=2003, mm=9, dd=15, & calendar=gregorianCalendar, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !NEX_UTest write(failMsg, *) " Did not return ESMF_SUCCESS" write(name, *) "Clock Initialization Test" clock1 = ESMF_ClockCreate(timeStep, startTime, stopTime=stopTime, & name="Clock 1", rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !NEX_UTest write(failMsg, *) " Did not return ESMF_SUCCESS" write(name, *) "Create Alarm Test" alarm1 = ESMF_AlarmCreate(name="WAKEUP", clock=clock1, ringTime=alarmTime, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !NEX_UTest write(failMsg, *) " Did not return ESMF_SUCCESS" write(name, *) "Destroy Alarm Test" call ESMF_AlarmDestroy(alarm1, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS), & name, failMsg, result, ESMF_SRCLINE) #ifdef ESMF_TESTEXHAUSTIVE ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_SUCCESS and alarmCount = 0" write(name, *) "Get number of alarms after destroyed Alarm Test" call ESMF_ClockGet(clock1, alarmCount=alarmCount, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS.and.alarmCount.eq.0), & name, failMsg, result, ESMF_SRCLINE) !print *, "alarmCount = ", alarmCount ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_FAILURE" write(name, *) "Get a destroyed Alarm Test" call ESMF_ClockGetAlarm(clock1, "WAKEUP", alarm=alarm, rc=rc) call ESMF_Test((rc.eq.ESMF_FAILURE), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_SUCCESS" write(name, *) "Advance clock after destroyed alarm test" call ESMF_ClockAdvance(clock1, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_RC_OBJ_DELETED" write(name, *) "Destroy a destroyed Alarm Test" call ESMF_AlarmDestroy(alarm1, rc=rc) call ESMF_Test((rc.eq.ESMF_RC_OBJ_DELETED), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_RC_OBJ_NOT_CREATED" write(name, *) "Destroy a non-created Alarm Test" call ESMF_AlarmDestroy(alarm6, rc=rc) call ESMF_Test((rc.eq.ESMF_RC_OBJ_NOT_CREATED), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_RC_OBJ_DELETED" write(name, *) "Check if destroyed Alarm is sticky Test" sticky = ESMF_AlarmIsSticky(alarm1, rc=rc) call ESMF_Test((rc.eq.ESMF_RC_OBJ_DELETED), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_RC_OBJ_NOT_CREATED" write(name, *) "Check if non-created Alarm is sticky Test" sticky = ESMF_AlarmIsSticky(alarm6, rc=rc) call ESMF_Test((rc.eq.ESMF_RC_OBJ_NOT_CREATED), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_RC_OBJ_DELETED" write(name, *) "Validate destroyed Alarm Test" call ESMF_AlarmValidate(alarm1, rc=rc) call ESMF_Test((rc.eq.ESMF_RC_OBJ_DELETED), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_RC_OBJ_NOT_CREATED" write(name, *) "Validate non-created Alarm Test" call ESMF_AlarmValidate(alarm6, rc=rc) call ESMF_Test((rc.eq.ESMF_RC_OBJ_NOT_CREATED), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_RC_OBJ_DELETED" write(name, *) "Check if destroyed Alarm is enabled Test" enabled = ESMF_AlarmIsEnabled(alarm1, rc=rc) call ESMF_Test((rc.eq.ESMF_RC_OBJ_DELETED), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_RC_OBJ_NOT_CREATED" write(name, *) "Check if non-created Alarm is enabled Test" enabled = ESMF_AlarmIsEnabled(alarm6, rc=rc) call ESMF_Test((rc.eq.ESMF_RC_OBJ_NOT_CREATED), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_RC_OBJ_DELETED" write(name, *) "Check if destroyed Alarm is not ringing Test" isringing = ESMF_AlarmIsRinging(alarm1, rc=rc) call ESMF_Test((rc.eq.ESMF_RC_OBJ_DELETED), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_RC_OBJ_NOT_CREATED" write(name, *) "Check if non-created Alarm is not ringing Test" isringing = ESMF_AlarmIsRinging(alarm6, rc=rc) call ESMF_Test((rc.eq.ESMF_RC_OBJ_NOT_CREATED), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_RC_OBJ_DELETED" write(name, *) "Get name of destroyed Alarm Test" call ESMF_AlarmGet(alarm1, name=aName, rc=rc) call ESMF_Test((rc.eq.ESMF_RC_OBJ_DELETED), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_RC_OBJ_NOT_CREATED" write(name, *) "Get name of destroyed Alarm Test" call ESMF_AlarmGet(alarm6, name=aName, rc=rc) call ESMF_Test((rc.eq.ESMF_RC_OBJ_NOT_CREATED), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_RC_OBJ_DELETED" write(name, *) "Set name of destroyed Alarm Test" call ESMF_AlarmSet(alarm1, name="ALARM1", rc=rc) call ESMF_Test((rc.eq.ESMF_RC_OBJ_DELETED), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_RC_OBJ_NOT_CREATED" write(name, *) "Set name of non-created Alarm Test" call ESMF_AlarmSet(alarm6, name="ALARM1", rc=rc) call ESMF_Test((rc.eq.ESMF_RC_OBJ_NOT_CREATED), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_RC_OBJ_DELETED" write(name, *) "Turn on Ringing on destroyed Alarm " call ESMF_AlarmRingerOn(alarm1, rc=rc) call ESMF_Test((rc.eq.ESMF_RC_OBJ_DELETED), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_RC_OBJ_NOT_CREATED" write(name, *) "Turn on Ringing on non-created Alarm " call ESMF_AlarmRingerOn(alarm6, rc=rc) call ESMF_Test((rc.eq.ESMF_RC_OBJ_NOT_CREATED), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_RC_OBJ_DELETED" write(name, *) "Turn off Ringing on destroyed Alarm " call ESMF_AlarmRingerOff(alarm1, rc=rc) call ESMF_Test((rc.eq.ESMF_RC_OBJ_DELETED), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_RC_OBJ_NOT_CREATED" write(name, *) "Turn off Ringing on non-created Alarm " call ESMF_AlarmRingerOff(alarm6, rc=rc) call ESMF_Test((rc.eq.ESMF_RC_OBJ_NOT_CREATED), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_RC_OBJ_DELETED" write(name, *) "Enable destroyed Alarm Test" call ESMF_AlarmEnable(alarm1, rc=rc) call ESMF_Test((rc.eq.ESMF_RC_OBJ_DELETED), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_RC_OBJ_NOT_CREATED" write(name, *) "Enable non-create Alarm Test" call ESMF_AlarmEnable(alarm6, rc=rc) call ESMF_Test((rc.eq.ESMF_RC_OBJ_NOT_CREATED), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_RC_OBJ_DELETED" write(name, *) "Check if destroyed Alarm is enabled Test" enabled = ESMF_AlarmIsEnabled(alarm1, rc=rc) call ESMF_Test((rc.eq.ESMF_RC_OBJ_DELETED), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_RC_OBJ_NOT_CREATED" write(name, *) "Check if non-created Alarm is enabled Test" enabled = ESMF_AlarmIsEnabled(alarm6, rc=rc) call ESMF_Test((rc.eq.ESMF_RC_OBJ_NOT_CREATED), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_RC_OBJ_DELETED" write(name, *) "Disable destroyed Alarm Test" call ESMF_AlarmDisable(alarm1, rc=rc) call ESMF_Test((rc.eq.ESMF_RC_OBJ_DELETED), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_RC_OBJ_NOT_CREATED" write(name, *) "Disable non-created Alarm Test" call ESMF_AlarmDisable(alarm6, rc=rc) call ESMF_Test((rc.eq.ESMF_RC_OBJ_NOT_CREATED), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest !Test if destroyed Alarm Previously ringing write(failMsg, *) " Did not return ESMF_RC_OBJ_DELETED" write(name, *) "Destroyed Alarm Was Previously ringing Test" bool = ESMF_AlarmWasPrevRinging(alarm1, rc=rc) call ESMF_Test((rc.eq.ESMF_RC_OBJ_DELETED), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest !Test if non-created Alarm Previously ringing write(failMsg, *) " Did not return ESMF_RC_OBJ_NOT_CREATED" write(name, *) "Non-created Alarm Was Previously ringing Test" bool = ESMF_AlarmWasPrevRinging(alarm6, rc=rc) call ESMF_Test((rc.eq.ESMF_RC_OBJ_NOT_CREATED), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_RC_OBJ_DELETED" write(name, *) "Turn off Ringing on destroyed Alarm " call ESMF_AlarmRingerOff(alarm1, rc=rc) call ESMF_Test((rc.eq.ESMF_RC_OBJ_DELETED), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_RC_OBJ_NOT_CREATED" write(name, *) "Turn off Ringing on non-created Alarm " call ESMF_AlarmRingerOff(alarm6, rc=rc) call ESMF_Test((rc.eq.ESMF_RC_OBJ_NOT_CREATED), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest !Test destroyed Alarm will ring next write(failMsg, *) " Did not return ESMF_RC_OBJ_DELETED" write(name, *) "Destroyed Alarm will ring next Test" willRingNext = ESMF_AlarmWillRingNext(alarm1, timeStep=timeStep, rc=rc) call ESMF_Test((rc.eq.ESMF_RC_OBJ_DELETED), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest !Test non-created Alarm will ring next write(failMsg, *) " Did not return ESMF_RC_OBJ_NOT_CREATED" write(name, *) "Non-created Alarm will ring next Test" willRingNext = ESMF_AlarmWillRingNext(alarm6, timeStep=timeStep, rc=rc) call ESMF_Test((rc.eq.ESMF_RC_OBJ_NOT_CREATED), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_SUCCESS" write(name, *) "Create Alarm Test" alarm1 = ESMF_AlarmCreate(name="WAKEUP1", clock=clock1, ringTime=alarmTime, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_SUCCESS" write(name, *) "Create Alarm Test" alarm3 = ESMF_AlarmCreate(name="WAKEUP3", clock=clock1, ringTime=alarmTime, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_SUCCESS" write(name, *) "Create Alarm Copy Test" alarm2 = ESMF_AlarmCreate(alarm1, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_SUCCESS" write(name, *) "Clock Get Alarm List Test 1 - optional args missing" call ESMF_ClockGetAlarmList(clock1, ESMF_ALARMLIST_ALL, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_SUCCESS" write(name, *) "Clock Get Alarm List Test 2 - only alarmList specified" call ESMF_ClockGetAlarmList(clock1, ESMF_ALARMLIST_ALL, & alarmList=alarmList, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_SUCCESS and alarmCount=3" write(name, *) "Clock Get Alarm List Test 3 - only alarmCount specified" call ESMF_ClockGetAlarmList(clock1, ESMF_ALARMLIST_ALL, & alarmCount=alarmCount, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS.and.alarmCount.eq.3), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_SUCCESS and alarmCount=1" write(name, *) "Clock Get Alarm List Test 4 - single-element length alarmList specified" call ESMF_AlarmRingerOn(alarm1, rc=rc) call ESMF_ClockGetAlarmList(clock1, ESMF_ALARMLIST_RINGING, & alarmList=alarmListOne, & alarmCount=alarmCount, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS.and.alarmCount.eq.1), & name, failMsg, result, ESMF_SRCLINE) call ESMF_AlarmRingerOff(alarm1, rc=rc) !call ESMF_AlarmPrint(alarmListOne(1), options="name", rc=rc) !print *, "alarmCount = ", alarmCount ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_SUCCESS and alarmCount = 3" write(name, *) "Clock Get Alarm List Test 5" call ESMF_ClockGetAlarmList(clock1, ESMF_ALARMLIST_ALL, & alarmList=alarmList, alarmCount=alarmCount, & rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS.and.alarmCount.eq.3), & name, failMsg, result, ESMF_SRCLINE) !call ESMF_AlarmPrint(alarmList(1), options="name", rc=rc) !call ESMF_AlarmPrint(alarmList(2), options="name", rc=rc) !call ESMF_AlarmPrint(alarmList(3), options="name", rc=rc) !print *, "alarmCount = ", alarmCount ! ---------------------------------------------------------------------------- !EX_UTest ! Testing ESMF_AlarmAssignment(=)(alarm,alarm) write(failMsg, *) "Returned not equal" write(name, *) "Alarm Assignment Test" alarm8 = alarm1 ! exercise default F90 Alarm = assignment call ESMF_AlarmGet(alarm8, name=aName, clock=clock3, & ringTime=time1, rc=rc) call ESMF_Test((alarm8==alarm1 .and. aName=="WAKEUP1" .and. & clock3==clock1 .and. time1==alarmTime), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest ! Testing ESMF_AlarmOperator(==)(alarm1,alarm2) write(failMsg, *) "Returned not equal" write(name, *) "Alarms Equal Test" alarmsEqual = (alarm1 == alarm2) ! exercise Alarm == operator call ESMF_Test((alarmsEqual), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest ! Testing ESMF_AlarmOperator(==)(alarm1,alarm2) write(failMsg, *) "Returned equal" write(name, *) "Alarms Not Equal Test" alarmsEqual = (alarm1 == alarm3) ! exercise Alarm == operator call ESMF_Test((.not.alarmsEqual), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest ! Testing ESMF_AlarmOperator(/=)(alarm1,alarm2) write(failMsg, *) "Returned not equal" write(name, *) "Alarms Equal Test" alarmsNotEqual = (alarm1 /= alarm2) ! exercise Alarm /= operator call ESMF_Test((.not.alarmsNotEqual), & name, failMsg, result, ESMF_SRCLINE) call ESMF_AlarmDestroy(alarm2, rc=rc) ! ---------------------------------------------------------------------------- !EX_UTest ! Testing ESMF_AlarmOperator(/=)(alarm1,alarm2) write(failMsg, *) "Returned equal" write(name, *) "Alarms Not Equal Test" alarmsNotEqual = (alarm1 /= alarm3) ! exercise Alarm /= operator call ESMF_Test((alarmsNotEqual), & name, failMsg, result, ESMF_SRCLINE) call ESMF_AlarmDestroy(alarm3, rc=rc) ! ---------------------------------------------------------------------------- !EX_UTest ! Testing ESMF_AlarmOperator(==)(alarm,alarm1) write(failMsg, *) "Returned equal" write(name, *) "Deleted Alarm Not Equal Created Alarm Test 1" alarmsEqual = (alarm2 == alarm1) ! exercise Alarm == operator call ESMF_Test((.not.alarmsEqual), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest ! Testing ESMF_AlarmOperator(==)(alarm,alarm1) write(failMsg, *) "Returned equal" write(name, *) "Deleted Alarm Not Equal Uncreated Alarm Test 1" alarmsEqual = (alarm3 == alarm7) ! exercise Alarm == operator call ESMF_Test((.not.alarmsEqual), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest ! Testing ESMF_AlarmOperator(==)(alarm,alarm1) write(failMsg, *) "Returned equal" write(name, *) "Uncreated Alarm Not Equal Created Alarm Test 1" alarmsEqual = (alarm7 == alarm1) ! exercise Alarm == operator call ESMF_Test((.not.alarmsEqual), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest ! Testing ESMF_AlarmOperator(==)(alarm,alarm1) write(failMsg, *) "Returned not equal" write(name, *) "Deleted Alarm Equal Deleted Alarm Test 1" alarmsEqual = (alarm2 == alarm3) ! exercise Alarm == operator call ESMF_Test((alarmsEqual), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest ! Testing ESMF_AlarmOperator(==)(alarm,alarm1) write(failMsg, *) "Returned not equal" write(name, *) "Uncreated Alarm Equal Uncreated Alarm Test 1" alarmsEqual = (alarm7 == alarm7) ! exercise Alarm == operator call ESMF_Test((alarmsEqual), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest ! Testing ESMF_AlarmOperator(/=)(alarm,alarm1) write(failMsg, *) "Returned equal" write(name, *) "Deleted Alarm Not Equal Created Alarm Test 2" alarmsNotEqual = (alarm2 /= alarm1) ! exercise Alarm /= operator call ESMF_Test((alarmsNotEqual), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest ! Testing ESMF_AlarmOperator(/=)(alarm,alarm1) write(failMsg, *) "Returned equal" write(name, *) "Deleted Alarm Not Equal Uncreated Alarm Test 2" alarmsNotEqual = (alarm3 /= alarm7) ! exercise Alarm /= operator call ESMF_Test((alarmsNotEqual), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest ! Testing ESMF_AlarmOperator(/=)(alarm,alarm1) write(failMsg, *) "Returned equal" write(name, *) "Uncreated Alarm Not Equal Created Alarm Test 2" alarmsNotEqual = (alarm7 /= alarm1) ! exercise Alarm /= operator call ESMF_Test((alarmsNotEqual), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest ! Testing ESMF_AlarmOperator(/=)(alarm,alarm1) write(failMsg, *) "Returned not equal" write(name, *) "Deleted Alarm Equal Deleted Alarm Test 2" alarmsNotEqual = (alarm2 /= alarm3) ! exercise Alarm /= operator call ESMF_Test((.not.alarmsNotEqual), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest ! Testing ESMF_AlarmOperator(/=)(alarm,alarm1) write(failMsg, *) "Returned equal" write(name, *) "Uncreated Alarm Equal Uncreated Alarm Test 2" alarmsNotEqual = (alarm7 /= alarm7) ! exercise Alarm /= operator call ESMF_Test((.not.alarmsNotEqual), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_SUCCESS" write(name, *) "Validate Alarm Test" call ESMF_AlarmValidate(alarm1, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_SUCCESS or returned not sticky" write(name, *) "Check if Alarm is sticky Test" sticky = ESMF_AlarmIsSticky(alarm1, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS).and.(sticky), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_SUCCESS or returned not enabled" write(name, *) "Check if Alarm is enabled Test" enabled = ESMF_AlarmIsEnabled(alarm1, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS).and.(enabled), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_SUCCESS" write(name, *) "Set Alarm not sticky Test" call ESMF_AlarmNotSticky(alarm1, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_SUCCESS or name is not correct" write(name, *) "Get Alarm name Test" call ESMF_AlarmGet(alarm1, name=aName, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS).and.(aName.eq."WAKEUP1"), & name, failMsg, result, ESMF_SRCLINE) !print *, "Alarm name is ", aName ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_SUCCESS or name is not correct" write(name, *) "Set Alarm name Test" call ESMF_AlarmSet(alarm1, name="ALARM1", rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_SUCCESS or name is not correct" write(name, *) "Get Alarm name Test" call ESMF_AlarmGet(alarm1, name=aName, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS).and.(aName.eq."ALARM1"), & name, failMsg, result, ESMF_SRCLINE) !print *, "Alarm name is ", aName ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_SUCCESS or returned sticky" write(name, *) "Check if Alarm is not sticky Test" sticky = ESMF_AlarmIsSticky(alarm1, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS).and.(.not.sticky), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_SUCCESS" write(name, *) "Set Alarm sticky Test" call ESMF_AlarmSticky(alarm1, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_SUCCESS or returned not sticky" write(name, *) "Check if Alarm is sticky Test" sticky = ESMF_AlarmIsSticky(alarm1, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS).and.(sticky), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_SUCCESS or is ringing" write(name, *) "Check if Alarm is not ringing Test" isringing = ESMF_AlarmIsRinging(alarm1, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS).and.(.not.isringing), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_SUCCESS" write(name, *) "Turn on Ringing Alarm " call ESMF_AlarmRingerOn(alarm1, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_SUCCESS or its not ringing" write(name, *) "Check if Alarm is ringing Test" isringing = ESMF_AlarmIsRinging(alarm1, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS).and.(isringing), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_SUCCESS" write(name, *) "Turn off Ringing Alarm " call ESMF_AlarmRingerOff(alarm1, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_SUCCESS or its ringing" write(name, *) "Check if Alarm is not ringing Test" isringing = ESMF_AlarmIsRinging(alarm1, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS).and.(.not.isringing), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_SUCCESS" write(name, *) "Enable Alarm Test" call ESMF_AlarmEnable(alarm1, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_SUCCESS or returned enabled" write(name, *) "Check if Alarm is enabled Test" enabled = ESMF_AlarmIsEnabled(alarm1, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS).and.(enabled), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_SUCCESS" write(name, *) "Alarm Print Test" call ESMF_AlarmPrint(alarm1, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_SUCCESS" write(name, *) "Disable Alarm Test" call ESMF_AlarmDisable(alarm1, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_SUCCESS or returned enabled" write(name, *) "Check if Alarm is disabled Test" enabled = ESMF_AlarmIsEnabled(alarm1, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS).and.(.not.enabled), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_SUCCESS" write(name, *) "Destroy Alarm Test" call ESMF_AlarmDestroy(alarm1, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_SUCCESS" write(name, *) "Destroy Clock Test" call ESMF_ClockDestroy(clock1, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest ! Test Setting Time Step write(failMsg, *) " Did not return ESMF_SUCCESS" write(name, *) "Set Time Interval Initialization Test" call ESMF_TimeIntervalSet(timeStep, h=1, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest ! Test Setting the Start Time write(failMsg, *) " Returned ESMF_FAILURE" write(name, *) "Set Start Time Initialization Test" call ESMF_TimeSet(startTime, yy=2003, mm=3, dd=13, & h=1, m=45, s=27, & calkindflag=ESMF_CALKIND_GREGORIAN, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest ! Test Setting the Stop Time write(failMsg, *) " Returned ESMF_FAILURE" write(name, *) "Set Stop Time Initialization Test" call ESMF_TimeSet(stopTime, yy=2003, mm=3, dd=13, & h=18, m=45, s=27, & calkindflag=ESMF_CALKIND_GREGORIAN, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest ! Test Setting the Alarm Time write(failMsg, *) " Returned ESMF_FAILURE" write(name, *) "Set Alarm Time Initialization Test" call ESMF_TimeSet(alarmTime, yy=2003, mm=3, dd=13, h=5, & calkindflag=ESMF_CALKIND_GREGORIAN, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- ! Initialize clock !EX_UTest write(name, *) "Clock Initialization Test" write(failMsg, *) " Did not return ESMF_SUCCESS" clock = ESMF_ClockCreate(timeStep, startTime, & stopTime=stopTime, name="Clock 1", rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_SUCCESS" write(name, *) "Sticky Alarm Time Initialization Test" alarm = ESMF_AlarmCreate(name="alarm1", clock=clock, ringTime=alarmTime, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_SUCCESS" write(name, *) "Get Alarm Test" call ESMF_ClockGetAlarm(clock, alarmname="alarm1", alarm=alarm, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest !Test Alarm will ring next call ESMF_ClockAdvance(clock, rc=rc) call ESMF_ClockAdvance(clock, rc=rc) write(failMsg, *) " Did not return ESMF_SUCCESS or returned wrong state" write(name, *) "Alarm will ring next Test" willRingNext = ESMF_AlarmWillRingNext(alarm, timeStep=timeStep, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS).and.(.not.willRingNext), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest !Test Get Clock Next Time write(failMsg, *) " Did not return ESMF_SUCCESS)" write(name, *) "Get Clock Next Time Test" call ESMF_ClockGetNextTime(clock, nextTime, timeStep=timeStep, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest !Test Alarm will ring next call ESMF_ClockAdvance(clock, rc=rc) write(failMsg, *) " Did not return ESMF_SUCCESS or returned wrong state" write(name, *) "Alarm will ring next Test" willRingNext = ESMF_AlarmWillRingNext(alarm, timeStep=timeStep, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS).and.(willRingNext), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest !Test Get Time from clock write(failMsg, *) " Did not return ESMF_SUCCESS" write(name, *) "Get Clock Current Time Test" call ESMF_ClockGet(clock, currTime=currentTime, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest !Test that Clock Get Next Time Passed !Testing ESMF_TimeOperator(==)(time1,time2) write(failMsg, *) " Next Time not equal to current Time" write(name, *) "Get Clock Next Time Test" bool = (nextTime == currentTime) ! exercising Time == operator call ESMF_Test((bool), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest !Test Alarm ringing call ESMF_ClockAdvance(clock, rc=rc) write(failMsg, *) " Did not return ESMF_SUCCESS or returned wrong state" write(name, *) "Alarm is ringing Test" bool = ESMF_AlarmIsRinging(alarm, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS).and.(bool), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest !Test Alarm still ringing call ESMF_ClockAdvance(clock, rc=rc) write(failMsg, *) " Did not return ESMF_SUCCESS or returned wrong state" write(name, *) "Alarm is still ringing Test" bool = ESMF_AlarmIsRinging(alarm, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS).and.(bool), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest !Test Alarm Previously ringing write(failMsg, *) " Did not return ESMF_SUCCESS or returned wrong state" write(name, *) "Alarm Was Previously ringing Test" bool = ESMF_AlarmWasPrevRinging(alarm, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS).and.(bool), & name, failMsg, result, ESMF_SRCLINE) !print *, "bool is ", bool ! ---------------------------------------------------------------------------- !EX_UTest !Test Alarm Previously ringing call ESMF_ClockAdvance(clock, rc=rc) write(failMsg, *) " Did not return ESMF_SUCCESS or returned wrong state" write(name, *) "Alarm Was Previously ringing Test" bool = ESMF_AlarmWasPrevRinging(alarm, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS).and.(bool), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest !Test Alarm still ringing call ESMF_ClockAdvance(clock, rc=rc) call ESMF_ClockAdvance(clock, rc=rc) call ESMF_ClockAdvance(clock, rc=rc) call ESMF_ClockAdvance(clock, rc=rc) call ESMF_ClockAdvance(clock, rc=rc) call ESMF_ClockAdvance(clock, rc=rc) call ESMF_ClockAdvance(clock, rc=rc) call ESMF_ClockAdvance(clock, rc=rc) write(failMsg, *) " Did not return ESMF_SUCCESS or returned wrong state" write(name, *) "Alarm is still ringing Test" bool = ESMF_AlarmIsRinging(alarm, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS).and.(bool), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_SUCCESS" write(name, *) "Turn off Ringing Alarm " call ESMF_AlarmRingerOff(alarm, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_SUCCESS or its ringing" write(name, *) "Check if Alarm is not ringing Test" isringing = ESMF_AlarmIsRinging(alarm, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS).and.(.not.isringing), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest !Test Alarm Previously ringing write(failMsg, *) " Did not return ESMF_SUCCESS or returned wrong state" write(name, *) "Alarm Was Previously ringing Test" bool = ESMF_AlarmWasPrevRinging(alarm, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS).and.(bool), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest !Test Alarm Previously ringing call ESMF_ClockAdvance(clock, rc=rc) write(failMsg, *) " Did not return ESMF_SUCCESS or returned wrong state" write(name, *) "Alarm Was Previously ringing Test" bool = ESMF_AlarmWasPrevRinging(alarm, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS).and.(bool), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest !Test Alarm Previously ringing call ESMF_ClockAdvance(clock, rc=rc) write(failMsg, *) " Did not return ESMF_SUCCESS or returned wrong state" write(name, *) "Alarm Was Previously ringing Test" bool = ESMF_AlarmWasPrevRinging(alarm, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS).and.(.not.bool), & name, failMsg, result, ESMF_SRCLINE) call ESMF_AlarmDestroy (alarm, rc=rc) call ESMF_ClockDestroy (clock, rc=rc) ! ---------------------------------------------------------------------------- ! Initialize clock !EX_UTest write(name, *) "Clock Initialization Test" write(failMsg, *) " Did not return ESMF_SUCCESS" clock = ESMF_ClockCreate(timeStep, startTime, stopTime=stopTime, & name="Clock 1", rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not return ESMF_SUCCESS" write(name, *) "Non-Sticky Alarm Time Initialization Test" alarm = ESMF_AlarmCreate(name="alarm1", clock=clock, & ringTime=alarmTime, sticky=.FALSE., rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest !Test Alarm will ring next call ESMF_ClockAdvance(clock, rc=rc) call ESMF_ClockAdvance(clock, rc=rc) write(failMsg, *) " Did not return ESMF_SUCCESS or returned wrong state" write(name, *) "Alarm will ring next Test" willRingNext = ESMF_AlarmWillRingNext(alarm, timeStep=timeStep, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS).and.(.not.willRingNext), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest !Test Alarm will ring next call ESMF_ClockAdvance(clock, rc=rc) write(failMsg, *) " Did not return ESMF_SUCCESS or returned wrong state" write(name, *) "Alarm will ring next Test" willRingNext = ESMF_AlarmWillRingNext(alarm, timeStep=timeStep, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS).and.(willRingNext), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest !Test Alarm ringing call ESMF_ClockAdvance(clock, rc=rc) write(failMsg, *) " Did not return ESMF_SUCCESS or returned wrong state" write(name, *) "Alarm is ringing Test" bool = ESMF_AlarmIsRinging(alarm, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS).and.(bool), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest !Test Alarm still ringing call ESMF_ClockAdvance(clock, rc=rc) write(failMsg, *) " Did not return ESMF_SUCCESS or returned wrong state" write(name, *) "Alarm is still ringing Test" bool = ESMF_AlarmIsRinging(alarm, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS).and.(.not.bool), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest !Test Alarm Previously ringing write(failMsg, *) " Did not return ESMF_SUCCESS or returned wrong state" write(name, *) "Alarm Was Previously ringing Test" bool = ESMF_AlarmWasPrevRinging(alarm, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS).and.(bool), & name, failMsg, result, ESMF_SRCLINE) !print *, "bool is ", bool ! ---------------------------------------------------------------------------- !EX_UTest !Test Alarm Previously ringing call ESMF_ClockAdvance(clock, rc=rc) write(failMsg, *) " Did not return ESMF_SUCCESS or returned wrong state" write(name, *) "Alarm Was Previously ringing Test" bool = ESMF_AlarmWasPrevRinging(alarm, rc=rc) call ESMF_Test((rc.eq.ESMF_SUCCESS).and.(.not.bool), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest !Test Non-Sticky Alarms 1 ! from Chris Hill via support issue 988241, bug 996229 write(failMsg, *) " Did not return nstep=48, sstep=73, i=144, and ESMF_SUCCESS" write(name, *) "Non-Sticky Alarm Test 1" call ESMF_TimeIntervalSet(timeStep, s=100, rc=rc) call ESMF_TimeIntervalSet(alarmStep, s=150, rc=rc) call ESMF_TimeSet(startTime, yy=1999, mm=12, dd=31, h=23, & calendar=gregorianCalendar, rc=rc) call ESMF_TimeSet(stopTime, yy=2000, mm=1, dd=1, h=3, & calendar=gregorianCalendar, rc=rc) clock2=ESMF_ClockCreate(timeStep, startTime, stopTime=stopTime, & name="Clock 2", rc=rc) call ESMF_TimeSet(alarmTime, yy=2000, mm=1, dd=1, h=1, & calendar=gregorianCalendar, rc=rc) alarm4 = ESMF_AlarmCreate(clock=clock2, ringTime=alarmTime, & ringInterval=alarmStep, sticky=.false., rc=rc) ! number of clock time steps alarm rings for nstep = 0 ! starting time step number for first alarm ring sstep = 0 ! total clock time steps i = 0 ! run the clock do while (.not. ESMF_ClockIsStopTime(clock2, rc=rc)) i = i + 1 call ESMF_ClockGetAlarmList(clock2, ESMF_ALARMLIST_RINGING, & alarmList=alarmList, & alarmCount=alarmCount, rc=rc) if (alarmCount .gt. 0) then if (sstep .eq. 0) sstep = i nstep = nstep + 1 endif call ESMF_ClockAdvance(clock2, rc=rc) enddo call ESMF_Test((rc.eq.ESMF_SUCCESS) & .and.(nstep.eq.48).and.(sstep.eq.73).and.(i.eq.144), & name, failMsg, result, ESMF_SRCLINE) call ESMF_AlarmDestroy(alarm4, rc=rc) call ESMF_ClockDestroy(clock2, rc=rc) ! ---------------------------------------------------------------------------- !EX_UTest !Test Non-Sticky Alarms 2 ! Test ringDuration and stopTime write(failMsg, *) " Did not return nstep=12 and ESMF_SUCCESS" write(name, *) "Non-Sticky Alarm Test 2" call ESMF_TimeIntervalSet(timeStep, m=15, rc=rc) call ESMF_TimeSet(startTime, yy=1999, mm=12, dd=31, h=23, & calendar=gregorianCalendar, rc=rc) call ESMF_TimeSet(stopTime, yy=2000, mm=1, dd=1, h=23, & calendar=gregorianCalendar, rc=rc) clock2 = ESMF_ClockCreate(timeStep, startTime, stopTime=stopTime, & name="Clock 2", rc=rc) call ESMF_TimeSet(alarmTime, yy=2000, mm=1, dd=1, h=1, & calendar=gregorianCalendar, rc=rc) call ESMF_TimeIntervalSet(alarmStep, h=2, rc=rc) call ESMF_TimeIntervalSet(ringDuration, m=30, rc=rc) call ESMF_TimeSet(alarmStopTime, yy=2000, mm=1, dd=1, h=13, & calendar=gregorianCalendar, rc=rc) alarm4 = ESMF_AlarmCreate(clock=clock2, ringTime=alarmTime, & ringInterval=alarmStep, & ringDuration=ringDuration, & stopTime=alarmStopTime, sticky=.false., rc=rc) ! number of clock time steps alarm rings for nstep = 0 ! run the clock do while (.not. ESMF_ClockIsStopTime(clock2, rc=rc)) if (ESMF_AlarmIsRinging(alarm4)) then nstep = nstep + 1 endif call ESMF_ClockAdvance(clock2, rc=rc) enddo call ESMF_Test((rc.eq.ESMF_SUCCESS).and.(nstep.eq.12), & name, failMsg, result, ESMF_SRCLINE) call ESMF_AlarmDestroy(alarm4, rc=rc) call ESMF_ClockDestroy(clock2, rc=rc) ! ---------------------------------------------------------------------------- !EX_UTest !Test Non-Sticky Alarms 3 ! Test ringTimeStepCount and stopTime write(failMsg, *) " Did not return nstep=18 and ESMF_SUCCESS" write(name, *) "Non-Sticky Alarm Test 3" call ESMF_TimeIntervalSet(timeStep, m=15, rc=rc) call ESMF_TimeSet(startTime, yy=1999, mm=12, dd=31, h=23, & calendar=gregorianCalendar, rc=rc) call ESMF_TimeSet(stopTime, yy=2000, mm=1, dd=1, h=23, & calendar=gregorianCalendar, rc=rc) clock2=ESMF_ClockCreate(timeStep, startTime, stopTime=stopTime, & name="Clock 2", rc=rc) call ESMF_TimeSet(alarmTime, yy=2000, mm=1, dd=1, h=1, & calendar=gregorianCalendar, rc=rc) call ESMF_TimeIntervalSet(alarmStep, h=2, rc=rc) call ESMF_TimeSet(alarmStopTime, yy=2000, mm=1, dd=1, h=13, & calendar=gregorianCalendar, rc=rc) alarm4 = ESMF_AlarmCreate(clock=clock2, ringTime=alarmTime, & ringInterval=alarmStep, & ringTimeStepCount=3, & stopTime=alarmStopTime, sticky=.false., rc=rc) ! number of clock time steps alarm rings for nstep = 0 ! run the clock do while (.not. ESMF_ClockIsStopTime(clock2, rc=rc)) if (ESMF_AlarmIsRinging(alarm4)) then nstep = nstep + 1 endif call ESMF_ClockAdvance(clock2, rc=rc) enddo call ESMF_Test((rc.eq.ESMF_SUCCESS).and.(nstep.eq.18), & name, failMsg, result, ESMF_SRCLINE) call ESMF_AlarmDestroy(alarm4, rc=rc) call ESMF_ClockDestroy(clock2, rc=rc) ! ---------------------------------------------------------------------------- !EX_UTest !Test Non-Sticky Alarms 4 ! Test ringTimeStepCount precedence over ringDuration write(failMsg, *) " Did not return nstep=18 and ESMF_SUCCESS" write(name, *) "Non-Sticky Alarm Test 4" call ESMF_TimeIntervalSet(timeStep, m=15, rc=rc) call ESMF_TimeSet(startTime, yy=1999, mm=12, dd=31, h=23, & calendar=gregorianCalendar, rc=rc) call ESMF_TimeSet(stopTime, yy=2000, mm=1, dd=1, h=23, & calendar=gregorianCalendar, rc=rc) clock2=ESMF_ClockCreate(timeStep, startTime, stopTime=stopTime, & name="Clock 2", rc=rc) call ESMF_TimeSet(alarmTime, yy=2000, mm=1, dd=1, h=1, & calendar=gregorianCalendar, rc=rc) call ESMF_TimeIntervalSet(alarmStep, h=2, rc=rc) call ESMF_TimeIntervalSet(ringDuration, m=30, rc=rc) call ESMF_TimeSet(alarmStopTime, yy=2000, mm=1, dd=1, h=13, & calendar=gregorianCalendar, rc=rc) alarm4 = ESMF_AlarmCreate(clock=clock2, ringTime=alarmTime, & ringInterval=alarmStep, & ringTimeStepCount=3, & ringDuration=ringDuration, & stopTime=alarmStopTime, sticky=.false., rc=rc) ! number of clock time steps alarm rings for nstep = 0 ! run the clock do while (.not. ESMF_ClockIsStopTime(clock2, rc=rc)) if (ESMF_AlarmIsRinging(alarm4)) then nstep = nstep + 1 endif call ESMF_ClockAdvance(clock2, rc=rc) enddo call ESMF_Test((rc.eq.ESMF_SUCCESS).and.(nstep.eq.18), & name, failMsg, result, ESMF_SRCLINE) call ESMF_AlarmDestroy(alarm4, rc=rc) call ESMF_ClockDestroy(clock2, rc=rc) ! ---------------------------------------------------------------------------- !EX_UTest !Test Non-Sticky Alarms 5 ! Test reverse non-sticky alarm write(failMsg, *) "Did not return nstep=24, forwardCount=96, reverseCount=0, etc., and ESMF_SUCCESS" write(name, *) "Non-Sticky Alarm Test 5" call ESMF_TimeIntervalSet(timeStep, m=15, rc=rc) call ESMF_TimeSet(startTime, yy=1999, mm=12, dd=31, h=23, & calendar=gregorianCalendar, rc=rc) call ESMF_TimeSet(stopTime, yy=2000, mm=1, dd=1, h=23, & calendar=gregorianCalendar, rc=rc) clock2 = ESMF_ClockCreate(timeStep, startTime, stopTime=stopTime, & name="Clock 2", rc=rc) call ESMF_TimeSet(alarmTime, yy=2000, mm=1, dd=1, h=1, & calendar=gregorianCalendar, rc=rc) call ESMF_TimeIntervalSet(alarmStep, h=2, rc=rc) call ESMF_TimeIntervalSet(ringDuration, m=30, rc=rc) call ESMF_TimeSet(alarmStopTime, yy=2000, mm=1, dd=1, h=13, & calendar=gregorianCalendar, rc=rc) alarm4 = ESMF_AlarmCreate(clock=clock2, ringTime=alarmTime, & ringInterval=alarmStep, & ringDuration=ringDuration, & stopTime=alarmStopTime, sticky=.false., rc=rc) ! number of clock time steps alarm rings for nstep = 0 ! number of times the clock has been run nclock = 0 do while (nclock < 2) ! run the clock do while (.not. ESMF_ClockIsDone(clock2, rc=rc)) !call ESMF_ClockGet(clock2, currTime=currentTime, rc=rc) !call ESMF_TimeGet(currentTime, yy=yy, mm=mm, dd=dd, h=h, m=m, rc=rc) !print *, mm, "/", dd, "/", yy, " ", h, ":", m !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) if (ESMF_AlarmIsRinging(alarm4)) then nstep = nstep + 1 !print *, "on" !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) else !print *, "off" endif !call ESMF_AlarmPrint(alarm4, options="ringtime string", rc=rc) !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) call ESMF_ClockAdvance(clock2, rc=rc) enddo if (nclock.eq.0) then call ESMF_ClockGet(clock2, direction=forwardDirection, & advanceCount=forwardCount, rc=rc) !print *, "forwardCount = ", forwardCount else call ESMF_ClockGet(clock2, direction=reverseDirection, & advanceCount=reverseCount, rc=rc) !print *, "reverseCount = ", reverseCount endif call ESMF_ClockSet(clock2, direction=ESMF_DIRECTION_REVERSE, rc=rc) nclock = nclock + 1 enddo call ESMF_Test((rc.eq.ESMF_SUCCESS).and.(nstep.eq.24).and. & (forwardCount.eq.96).and.(reverseCount.eq.0).and. & (forwardDirection.eq.ESMF_DIRECTION_FORWARD).and. & (reverseDirection.eq.ESMF_DIRECTION_REVERSE).and. & ESMF_ClockIsReverse(clock2), & name, failMsg, result, ESMF_SRCLINE) !print *, "nstep = ", nstep, " nclock = ", nclock !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) call ESMF_AlarmDestroy(alarm4, rc=rc) call ESMF_ClockDestroy(clock2, rc=rc) ! ---------------------------------------------------------------------------- !EX_UTest !Test Non-Sticky Alarms 6 ! Test reverse non-sticky alarm with negative timestep write(failMsg, *) "Did not return nring=48, forwardCount=96, reverseCount=0, etc., and ESMF_SUCCESS" write(name, *) "Non-Sticky Alarm Test 6" call ESMF_TimeIntervalSet(timeStep, m=-15, rc=rc) call ESMF_TimeSet(startTime, yy=2000, mm=1, dd=1, h=23, & calendar=gregorianCalendar, rc=rc) call ESMF_TimeSet(stopTime, yy=1999, mm=12, dd=31, h=23, & calendar=gregorianCalendar, rc=rc) clock2 = ESMF_ClockCreate(timeStep, startTime, stopTime=stopTime, & name="Clock 2", rc=rc) call ESMF_TimeSet(alarmTime, yy=2000, mm=1, dd=1, h=23, & calendar=gregorianCalendar, rc=rc) call ESMF_TimeIntervalSet(alarmStep, h=-2, rc=rc) call ESMF_TimeIntervalSet(ringDuration, m=-30, rc=rc) call ESMF_TimeSet(alarmStopTime, yy=1999, mm=12, dd=31, h=21, & calendar=gregorianCalendar, rc=rc) alarm4 = ESMF_AlarmCreate(clock=clock2, ringTime=alarmTime, & ringInterval=alarmStep, & ringDuration=ringDuration, & stopTime=alarmStopTime, & sticky=.false., rc=rc) ! number of clock time steps alarm rings for nring = 0 ! number of times the clock has been run nclock = 0 do while (nclock < 2) ! run the clock do while (.not. ESMF_ClockIsDone(clock2, rc=rc)) call ESMF_ClockGet(clock2, currTime=currentTime, rc=rc) call ESMF_TimeGet(currentTime, yy=yy, mm=mm, dd=dd, h=h, m=m, rc=rc) !print *, mm, "/", dd, "/", yy, " ", h, ":", m !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) if (ESMF_AlarmIsRinging(alarm4)) then nring = nring + 1 !print *, "ringing!" !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) endif !call ESMF_AlarmPrint(alarm4, options="ringbegin string", rc=rc) !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) !call ESMF_AlarmPrint(alarm4, options="ringtime string", rc=rc) !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) call ESMF_ClockAdvance(clock2, rc=rc) enddo if (nclock.eq.0) then call ESMF_ClockGet(clock2, direction=forwardDirection, & advanceCount=forwardCount, rc=rc) !print *, "forwardCount = ", forwardCount else call ESMF_ClockGet(clock2, direction=reverseDirection, & advanceCount=reverseCount, rc=rc) !print *, "reverseCount = ", reverseCount endif !print *, "Going in REVERSE ..." !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) call ESMF_ClockSet(clock2, direction=ESMF_DIRECTION_REVERSE, rc=rc) nclock = nclock + 1 enddo call ESMF_Test((rc.eq.ESMF_SUCCESS).and.(nring.eq.48).and. & (forwardCount.eq.96).and.(reverseCount.eq.0).and. & (forwardDirection.eq.ESMF_DIRECTION_FORWARD).and. & (reverseDirection.eq.ESMF_DIRECTION_REVERSE).and. & ESMF_ClockIsReverse(clock2), & name, failMsg, result, ESMF_SRCLINE) !print *, "nring = ", nring, " nclock = ", nclock !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) call ESMF_AlarmDestroy(alarm4, rc=rc) call ESMF_ClockDestroy(clock2, rc=rc) ! ---------------------------------------------------------------------------- !EX_UTest !Test Sticky Alarms 1 ! Test reverse sticky alarm write(failMsg, *) " Did not return nstep=2 and ESMF_SUCCESS" write(name, *) "Sticky Alarm Test 1" call ESMF_TimeIntervalSet(timeStep, m=15, rc=rc) call ESMF_TimeSet(startTime, yy=1999, mm=12, dd=31, h=23, & calendar=gregorianCalendar, rc=rc) call ESMF_TimeSet(stopTime, yy=2000, mm=1, dd=1, h=23, & calendar=gregorianCalendar, rc=rc) clock2 = ESMF_ClockCreate(timeStep, startTime, stopTime=stopTime, & name="Clock 2", rc=rc) call ESMF_TimeSet(alarmTime, yy=2000, mm=1, dd=1, h=1, & calendar=gregorianCalendar, rc=rc) alarm4 = ESMF_AlarmCreate(clock=clock2, ringTime=alarmTime, rc=rc) ! number of clock time steps alarm rings for nstep = 0 ! number of times the clock has been run nclock = 0 do while (nclock < 2) ! run the clock do while (.not. ESMF_ClockIsDone(clock2, rc=rc)) call ESMF_ClockGet(clock2, currTime=currentTime, rc=rc) call ESMF_TimeGet(currentTime, yy=yy, mm=mm, dd=dd, h=h, m=m, rc=rc) !print *, mm, "/", dd, "/", yy, " ", h, ":", m if (ESMF_AlarmIsRinging(alarm4)) then nstep = nstep + 1 !print *, "on" call ESMF_AlarmRingerOff(alarm4, rc=rc) else !print *, "off" endif call ESMF_ClockAdvance(clock2, rc=rc) enddo call ESMF_ClockSet(clock2, direction=ESMF_DIRECTION_REVERSE, rc=rc) nclock = nclock + 1 enddo call ESMF_Test((rc.eq.ESMF_SUCCESS).and.(nstep.eq.2), & name, failMsg, result, ESMF_SRCLINE) !print *, "nstep = ", nstep, " nclock = ", nclock call ESMF_AlarmDestroy(alarm4, rc=rc) call ESMF_ClockDestroy(clock2, rc=rc) ! ---------------------------------------------------------------------------- !EX_UTest !Test Sticky Alarms 2 ! Test reverse interval sticky alarm write(failMsg, *) " Did not return nstep=23 and ESMF_SUCCESS" write(name, *) "Sticky Alarm Test 2" call ESMF_TimeIntervalSet(timeStep, m=15, rc=rc) call ESMF_TimeSet(startTime, yy=1999, mm=12, dd=31, h=23, & calendar=gregorianCalendar, rc=rc) call ESMF_TimeSet(stopTime, yy=2000, mm=1, dd=1, h=23, & calendar=gregorianCalendar, rc=rc) clock2 = ESMF_ClockCreate(timeStep, startTime, stopTime=stopTime, & name="Clock 2", rc=rc) call ESMF_TimeSet(alarmTime, yy=2000, mm=1, dd=1, h=1, & calendar=gregorianCalendar, rc=rc) call ESMF_TimeIntervalSet(alarmStep, h=2, rc=rc) alarm4 = ESMF_AlarmCreate(clock=clock2, ringTime=alarmTime, & ringInterval=alarmStep, rc=rc) ! number of clock time steps alarm rings for nstep = 0 ! number of times the clock has been run nclock = 0 do while (nclock < 2) ! run the clock do while (.not. ESMF_ClockIsDone(clock2, rc=rc)) call ESMF_ClockGet(clock2, currTime=currentTime, rc=rc) call ESMF_TimeGet(currentTime, yy=yy, mm=mm, dd=dd, h=h, m=m, rc=rc) !print *, mm, "/", dd, "/", yy, " ", h, ":", m if (ESMF_AlarmIsRinging(alarm4)) then nstep = nstep + 1 !print *, "on" call ESMF_AlarmRingerOff(alarm4, rc=rc) else !print *, "off" endif call ESMF_ClockAdvance(clock2, rc=rc) enddo call ESMF_ClockSet(clock2, direction=ESMF_DIRECTION_REVERSE, rc=rc) nclock = nclock + 1 enddo call ESMF_Test((rc.eq.ESMF_SUCCESS).and.(nstep.eq.23), & name, failMsg, result, ESMF_SRCLINE) !print *, "nstep = ", nstep, " nclock = ", nclock call ESMF_AlarmDestroy(alarm4, rc=rc) call ESMF_ClockDestroy(clock2, rc=rc) ! ---------------------------------------------------------------------------- !EX_UTest !Test Sticky Alarms 3 ! Test reverse one-shot sticky alarms per WRF use case ! From Tom Henderson/WRF write(name, *) "Sticky Alarm Test 3" write(failMsg, *) " Alarms did not turn on/off at the correct time/iteration or did not return ESMF_SUCCESS" call ESMF_TimeIntervalSet(timeStep, h=1, rc=rc) call ESMF_TimeSet(startTime, yy=2005, mm=6, dd=15, h=1, & calendar=gregorianCalendar, rc=rc) call ESMF_TimeSet(stopTime, yy=2005, mm=6, dd=15, h=5, & calendar=gregorianCalendar, rc=rc) domainClock = ESMF_ClockCreate(timeStep, startTime, stopTime=stopTime, & name="WRF Clock", rc=rc) call ESMF_TimeSet(beforeAlarmTime, yy=2005, mm=6, dd=15, h=2, & calendar=gregorianCalendar, rc=rc) beforeAlarm = ESMF_AlarmCreate(clock=domainClock, & ringTime=beforeAlarmTime, rc=rc) call ESMF_TimeSet(afterAlarmTime, yy=2005, mm=6, dd=15, h=3, & calendar=gregorianCalendar, rc=rc) afterAlarm = ESMF_AlarmCreate(clock=domainClock, & ringTime=afterAlarmTime, rc=rc) ! any single failure will cause the whole test to fail testPass = .true. ! track loop iterations iteration = 0 call ESMF_ClockGet(domainClock, currTime=currentTime, rc=rc) call ESMF_TimeGet(currentTime, yy=yy, mm=mm, dd=dd, h=h, rc=rc) !print *, "Begin" !print *, mm, "/", dd, "/", yy, " ", h, ": 0" ! run the clock forward do while (.not. ESMF_ClockIsDone(domainClock, rc=rc)) iteration = iteration + 1 !print *, "Iteration = ", iteration if (ESMF_AlarmIsRinging(beforeAlarm, rc=rc)) then if (iteration .ne. 2 .or. h .ne. 2) then testPass = .false. endif !print *, " beforeAlarm on" call ESMF_AlarmRingerOff(beforeAlarm, rc=rc) else !print *, " beforeAlarm off" endif ! would call WRF solver here, before clock advance !print *, " Solve" call ESMF_ClockAdvance(domainClock, rc=rc) call ESMF_ClockGet(domainClock, currTime=currentTime, rc=rc) call ESMF_TimeGet(currentTime, yy=yy, mm=mm, dd=dd, h=h, rc=rc) !print *, " ClockAdvance()" !print *, mm, "/", dd, "/", yy, " ", h, ": 0" if (ESMF_AlarmIsRinging(afterAlarm, rc=rc)) then if (iteration .ne. 2 .or. h .ne. 3) then testPass = .false. endif !print *, " afterAlarm on" call ESMF_AlarmRingerOff(afterAlarm, rc=rc) else !print *, " afterAlarm off" endif enddo ! run the clock backwards call ESMF_ClockSet(domainClock, direction=ESMF_DIRECTION_REVERSE, rc=rc) !print * !print *, "domainClock set in reverse" !print * do while (.not. ESMF_ClockIsDone(domainClock, rc=rc)) !print *, "Iteration = ", iteration if (ESMF_AlarmIsRinging(afterAlarm, rc=rc)) then if (iteration .ne. 2 .or. h .ne. 3) then testPass = .false. endif !print *, " afterAlarm on" call ESMF_AlarmRingerOff(afterAlarm, rc=rc) else !print *, " afterAlarm off" endif ! advance clock call ESMF_ClockAdvance(domainClock, rc=rc) call ESMF_ClockGet(domainClock, currTime=currentTime, rc=rc) call ESMF_TimeGet(currentTime, yy=yy, mm=mm, dd=dd, h=h, rc=rc) !print *, " ClockAdvance()" !print *, mm, "/", dd, "/", yy, " ", h, ": 0" ! would call WRF solver here, after clock advance !print *, " Solve" if (ESMF_AlarmIsRinging(beforeAlarm, rc=rc)) then if (iteration .ne. 2 .or. h .ne. 2) then testPass = .false. endif !print *, " beforeAlarm on" call ESMF_AlarmRingerOff(beforeAlarm, rc=rc) else !print *, " beforeAlarm off" endif iteration = iteration - 1 enddo call ESMF_Test(testPass.and.(rc.eq.ESMF_SUCCESS), & name, failMsg, result, ESMF_SRCLINE) call ESMF_AlarmDestroy(afterAlarm, rc=rc) call ESMF_AlarmDestroy(beforeAlarm, rc=rc) call ESMF_ClockDestroy(domainClock, rc=rc) ! ---------------------------------------------------------------------------- !EX_UTest !Test Sticky Alarms 4 ! Test reverse *interval* sticky alarms; variation on WRF use case above write(name, *) "Sticky Alarm Test 4" write(failMsg, *) " Alarms did not turn on/off at the correct time/iteration or did not return ESMF_SUCCESS" call ESMF_TimeIntervalSet(timeStep, h=1, rc=rc) call ESMF_TimeSet(startTime, yy=2005, mm=6, dd=15, h=1, & calendar=gregorianCalendar, rc=rc) call ESMF_TimeSet(stopTime, yy=2005, mm=6, dd=15, h=10, & calendar=gregorianCalendar, rc=rc) domainClock = ESMF_ClockCreate(timeStep, startTime, stopTime=stopTime, & name="WRF Clock", rc=rc) call ESMF_TimeSet(beforeAlarmTime, yy=2005, mm=6, dd=15, h=2, & calendar=gregorianCalendar, rc=rc) call ESMF_TimeIntervalSet(alarmStep, h=3, rc=rc) beforeAlarm = ESMF_AlarmCreate(clock=domainClock, & ringTime=beforeAlarmTime, & ringInterval=alarmStep, rc=rc) call ESMF_TimeSet(afterAlarmTime, yy=2005, mm=6, dd=15, h=3, & calendar=gregorianCalendar, rc=rc) call ESMF_TimeIntervalSet(alarmStep2, h=2, rc=rc) afterAlarm = ESMF_AlarmCreate(clock=domainClock, & ringTime=afterAlarmTime, & ringInterval=alarmStep2, rc=rc) ! any single failure will cause the whole test to fail testPass = .true. ! track loop iterations iteration = 0 call ESMF_ClockGet(domainClock, currTime=currentTime, rc=rc) call ESMF_TimeGet(currentTime, yy=yy, mm=mm, dd=dd, h=h, rc=rc) !print *, "Begin" !print *, mm, "/", dd, "/", yy, " ", h, ": 0" ! run the clock forward do while (.not. ESMF_ClockIsDone(domainClock, rc=rc)) iteration = iteration + 1 !print *, "Iteration = ", iteration if (ESMF_AlarmIsRinging(beforeAlarm, rc=rc)) then if ((iteration .ne. 2 .or. h .ne. 2).and. & (iteration .ne. 5 .or. h .ne. 5).and. & (iteration .ne. 8 .or. h .ne. 8)) then testPass = .false. endif !print *, " beforeAlarm on" call ESMF_AlarmRingerOff(beforeAlarm, rc=rc) else !print *, " beforeAlarm off" endif ! would call WRF solver here, before clock advance !print *, " Solve" call ESMF_ClockAdvance(domainClock, rc=rc) call ESMF_ClockGet(domainClock, currTime=currentTime, rc=rc) call ESMF_TimeGet(currentTime, yy=yy, mm=mm, dd=dd, h=h, rc=rc) !print *, " ClockAdvance()" !print *, mm, "/", dd, "/", yy, " ", h, ": 0" if (ESMF_AlarmIsRinging(afterAlarm, rc=rc)) then if ((iteration .ne. 2 .or. h .ne. 3).and. & (iteration .ne. 4 .or. h .ne. 5).and. & (iteration .ne. 6 .or. h .ne. 7).and. & (iteration .ne. 8 .or. h .ne. 9)) then testPass = .false. endif !print *, " afterAlarm on" call ESMF_AlarmRingerOff(afterAlarm, rc=rc) else !print *, " afterAlarm off" endif enddo ! run the clock backwards call ESMF_ClockSet(domainClock, direction=ESMF_DIRECTION_REVERSE, rc=rc) !print * !print *, "domainClock set in reverse" !print * do while (.not. ESMF_ClockIsDone(domainClock, rc=rc)) !print *, "Iteration = ", iteration if (ESMF_AlarmIsRinging(afterAlarm, rc=rc)) then if ((iteration .ne. 2 .or. h .ne. 3).and. & (iteration .ne. 4 .or. h .ne. 5).and. & (iteration .ne. 6 .or. h .ne. 7).and. & (iteration .ne. 8 .or. h .ne. 9)) then testPass = .false. endif !print *, " afterAlarm on" call ESMF_AlarmRingerOff(afterAlarm, rc=rc) else !print *, " afterAlarm off" endif ! advance clock call ESMF_ClockAdvance(domainClock, rc=rc) call ESMF_ClockGet(domainClock, currTime=currentTime, rc=rc) call ESMF_TimeGet(currentTime, yy=yy, mm=mm, dd=dd, h=h, rc=rc) !print *, " ClockAdvance()" !print *, mm, "/", dd, "/", yy, " ", h, ": 0" ! would call WRF solver here, after clock advance !print *, " Solve" if (ESMF_AlarmIsRinging(beforeAlarm, rc=rc)) then if ((iteration .ne. 2 .or. h .ne. 2).and. & (iteration .ne. 5 .or. h .ne. 5).and. & (iteration .ne. 8 .or. h .ne. 8)) then testPass = .false. endif !print *, " beforeAlarm on" call ESMF_AlarmRingerOff(beforeAlarm, rc=rc) else !print *, " beforeAlarm off" endif iteration = iteration - 1 enddo call ESMF_Test(testPass.and.(rc.eq.ESMF_SUCCESS), & name, failMsg, result, ESMF_SRCLINE) call ESMF_AlarmDestroy(afterAlarm, rc=rc) call ESMF_AlarmDestroy(beforeAlarm, rc=rc) call ESMF_ClockDestroy(domainClock, rc=rc) ! ---------------------------------------------------------------------------- !EX_UTest !Test Sticky Alarms 5 ! Test delay in checking for ringing sticky alarms, ! from James Geiger in #2825456, case #2 in his alarm_test.f90 reproducer write(name, *) "Sticky Alarm Test 5" write(failMsg, *) " Alarm did not ring at the correct times or did not return ESMF_SUCCESS" call ESMF_TimeIntervalSet(timeStep, s=3600, rc=rc) call ESMF_TimeSet(startTime, yy=2000, mm=1, dd=1, & calendar=gregorianCalendar, rc=rc) call ESMF_TimeSet(stopTime, yy=2000, mm=1, dd=3, & calendar=gregorianCalendar, rc=rc) clock2 = ESMF_ClockCreate(timeStep, startTime, stopTime=stopTime, & name="Clock", rc=rc) call ESMF_TimeSet(alarmTime, yy=2000, mm=1, dd=1, & calendar=gregorianCalendar, rc=rc) call ESMF_TimeIntervalSet(alarmStep, h=3, rc=rc) alarmTime = alarmTime + alarmStep alarm4 = ESMF_AlarmCreate(clock=clock2, ringTime=alarmTime, & ringInterval=alarmStep, rc=rc) testPass = .false. iteration = 0 nring = 0 do while (.not.ESMF_ClockIsStopTime(clock2, rc=rc)) iteration = iteration + 1 !print *, "clock2 timestep ", iteration !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) if (iteration .eq. 10) then ! waiting period is over, clear any alarm which may have occurred if (ESMF_AlarmIsRinging(alarm4, rc=rc)) then call ESMF_AlarmRingerOff(alarm4, rc=rc) endif endif call ESMF_ClockAdvance(clock2, rc=rc) !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) !call ESMF_ClockPrint(clock2, options="currTime string", rc=rc) !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) if (iteration .gt. 10) then ! process any alarm occuring after initial 10 hour waiting period if (ESMF_AlarmIsRinging(alarm4, rc=rc)) then nring = nring + 1 !print *, "alarm4 is ringing!" !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) call ESMF_AlarmRingerOff(alarm4, rc=rc) endif endif end do ! test in REVERSE mode (not from James) call ESMF_ClockSet(clock2, direction=ESMF_DIRECTION_REVERSE, rc=rc) do while (.not.ESMF_ClockIsDone(clock2, rc=rc)) iteration = iteration + 1 !print *, "clock2 timestep ", iteration !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) call ESMF_ClockAdvance(clock2, rc=rc) !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) !call ESMF_ClockPrint(clock2, options="currTime string", rc=rc) !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) if (ESMF_AlarmIsRinging(alarm4, rc=rc)) then nring = nring + 1 !print *, "alarm4 is ringing!" !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) call ESMF_AlarmRingerOff(alarm4, rc=rc) endif end do ! test double back in FORWARD mode (not from James) call ESMF_ClockSet(clock2, direction=ESMF_DIRECTION_FORWARD, rc=rc) do while (.not.ESMF_ClockIsDone(clock2, rc=rc)) iteration = iteration + 1 !print *, "clock2 timestep ", iteration !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) call ESMF_ClockAdvance(clock2, rc=rc) !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) !call ESMF_ClockPrint(clock2, options="currTime string", rc=rc) !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) if (ESMF_AlarmIsRinging(alarm4, rc=rc)) then nring = nring + 1 !print *, "alarm4 is ringing!" !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) call ESMF_AlarmRingerOff(alarm4, rc=rc) endif end do !print *, "alarm4 rang ", nring, " times, clock stepped ", iteration, " times." !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) if (nring.eq.44 .and. iteration.eq.144) testPass = .true. call ESMF_Test(testPass.and.(rc.eq.ESMF_SUCCESS), & name, failMsg, result, ESMF_SRCLINE) call ESMF_AlarmDestroy(alarm4, rc=rc) call ESMF_ClockDestroy(clock2, rc=rc) ! ---------------------------------------------------------------------------- !EX_UTest !Test Sticky Alarms 6 ! Test timeStep == ringInterval, from James Geiger in #2910203 write(name, *) "Sticky Alarm Test 6" write(failMsg, *) " Alarm did not ring at the correct times or did not return ESMF_SUCCESS" call ESMF_TimeIntervalSet(timeStep, s=900, rc=rc) call ESMF_TimeSet(startTime, yy=2003, mm=9, dd=1, & calendar=gregorianCalendar, rc=rc) ! dd=3, instead of original 30 in Jims report, to shorten test run time call ESMF_TimeSet(stopTime, yy=2003, mm=9, dd=3, & calendar=gregorianCalendar, rc=rc) clock2 = ESMF_ClockCreate(timeStep, startTime, stopTime=stopTime, & name="The Clock", rc=rc) call ESMF_TimeSet(alarmTime, yy=2003, mm=9, dd=1, & calendar=gregorianCalendar, rc=rc) call ESMF_TimeIntervalSet(alarmStep, s=900, rc=rc) alarm4 = ESMF_AlarmCreate(clock=clock2, ringTime=alarmTime, & ringInterval=alarmStep, rc=rc) testPass = .false. iteration = 0 nring = 0 do while (.not.ESMF_ClockIsStopTime(clock2, rc=rc)) iteration = iteration + 1 !print *, "clock2 timestep ", iteration !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) call ESMF_ClockAdvance(clock2, rc=rc) !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) !call ESMF_ClockPrint(clock2, options="currTime string", rc=rc) !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) if (ESMF_AlarmIsRinging(alarm4, rc=rc)) then nring = nring + 1 !print *, "alarm4 is ringing!" !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) call ESMF_AlarmRingerOff(alarm4, rc=rc) endif end do ! test in REVERSE mode (not from James) call ESMF_ClockSet(clock2, direction=ESMF_DIRECTION_REVERSE, rc=rc) do while (.not.ESMF_ClockIsDone(clock2, rc=rc)) iteration = iteration + 1 !print *, "clock2 timestep ", iteration !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) call ESMF_ClockAdvance(clock2, rc=rc) !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) !call ESMF_ClockPrint(clock2, options="currTime string", rc=rc) !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) if (ESMF_AlarmIsRinging(alarm4, rc=rc)) then nring = nring + 1 !print *, "alarm4 is ringing!" !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) call ESMF_AlarmRingerOff(alarm4, rc=rc) endif end do ! test double back in FORWARD mode (not from James), call ESMF_ClockSet(clock2, direction=ESMF_DIRECTION_FORWARD, rc=rc) do while (.not.ESMF_ClockIsDone(clock2, rc=rc)) iteration = iteration + 1 !print *, "clock2 timestep ", iteration !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) call ESMF_ClockAdvance(clock2, rc=rc) !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) !call ESMF_ClockPrint(clock2, options="currTime string", rc=rc) !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) if (ESMF_AlarmIsRinging(alarm4, rc=rc)) then nring = nring + 1 !print *, "alarm4 is ringing!" !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) call ESMF_AlarmRingerOff(alarm4, rc=rc) endif end do !print *, "alarm4 rang ", nring, " times, clock stepped ", iteration, " times." !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) if (nring.eq.576 .and. iteration.eq.576) testPass = .true. call ESMF_Test(testPass.and.(rc.eq.ESMF_SUCCESS), & name, failMsg, result, ESMF_SRCLINE) call ESMF_AlarmDestroy(alarm4, rc=rc) call ESMF_ClockDestroy(clock2, rc=rc) ! ---------------------------------------------------------------------------- !EX_UTest !Test Sticky Alarms 7 ! Test timeStep > ringInterval, inspired by James Geiger in #2910203 write(name, *) "Sticky Alarm Test 7" write(failMsg, *) " Alarm did not ring at the correct times or did not return ESMF_SUCCESS" call ESMF_TimeIntervalSet(timeStep, s=1800, rc=rc) call ESMF_TimeSet(startTime, yy=2003, mm=9, dd=1, & calendar=gregorianCalendar, rc=rc) ! dd=3, instead of original 30 in Jims report, to save test run time call ESMF_TimeSet(stopTime, yy=2003, mm=9, dd=3, & calendar=gregorianCalendar, rc=rc) clock2 = ESMF_ClockCreate(timeStep, startTime, stopTime=stopTime, & name="The Clock", rc=rc) call ESMF_TimeSet(alarmTime, yy=2003, mm=9, dd=1, & calendar=gregorianCalendar, rc=rc) call ESMF_TimeIntervalSet(alarmStep, s=900, rc=rc) alarm4 = ESMF_AlarmCreate(clock=clock2, ringTime=alarmTime, & ringInterval=alarmStep, rc=rc) testPass = .false. iteration = 0 nring = 0 do while (.not.ESMF_ClockIsStopTime(clock2, rc=rc)) iteration = iteration + 1 !print *, "clock2 timestep ", iteration !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) call ESMF_ClockAdvance(clock2, rc=rc) !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) !call ESMF_ClockPrint(clock2, options="currTime string", rc=rc) !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) if (ESMF_AlarmIsRinging(alarm4, rc=rc)) then nring = nring + 1 !print *, "alarm4 is ringing!" !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) call ESMF_AlarmRingerOff(alarm4, rc=rc) endif !call ESMF_AlarmPrint(alarm4, options="ringtime string", rc=rc) !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) end do !print *, "At end of 1st forward run, nring = ", nring !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) ! TODO: test in REVERSE mode (not from James) ! currently doesn't ring in REVERSE call ESMF_ClockSet(clock2, direction=ESMF_DIRECTION_REVERSE, rc=rc) do while (.not.ESMF_ClockIsDone(clock2, rc=rc)) iteration = iteration + 1 !print *, "clock2 timestep ", iteration !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) call ESMF_ClockAdvance(clock2, rc=rc) !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) !call ESMF_ClockPrint(clock2, options="currTime string", rc=rc) !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) if (ESMF_AlarmIsRinging(alarm4, rc=rc)) then nring = nring + 1 !print *, "alarm4 is ringing!" !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) call ESMF_AlarmRingerOff(alarm4, rc=rc) endif !call ESMF_AlarmPrint(alarm4, options="ringtime string", rc=rc) !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) end do !print *, "At end of reverse run, nring = ", nring !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) ! TODO: test double back in FORWARD mode (not from James) ! currently doesn't work until back into day 2 call ESMF_ClockSet(clock2, direction=ESMF_DIRECTION_FORWARD, rc=rc) do while (.not.ESMF_ClockIsDone(clock2, rc=rc)) iteration = iteration + 1 !print *, "clock2 timestep ", iteration !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) call ESMF_ClockAdvance(clock2, rc=rc) !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) !call ESMF_ClockPrint(clock2, options="currTime string", rc=rc) !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) if (ESMF_AlarmIsRinging(alarm4, rc=rc)) then nring = nring + 1 !print *, "alarm4 is ringing!" !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) call ESMF_AlarmRingerOff(alarm4, rc=rc) endif !call ESMF_AlarmPrint(alarm4, options="ringtime string", rc=rc) !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) end do !print *, "At end of 2nd forward run, nring = ", nring !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) !print *, "alarm4 rang ", nring, " times, clock stepped ", iteration, " times." !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) if (nring.eq.288 .and. iteration.eq.288) testPass = .true. call ESMF_Test(testPass.and.(rc.eq.ESMF_SUCCESS), & name, failMsg, result, ESMF_SRCLINE) !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) call ESMF_AlarmDestroy(alarm4, rc=rc) call ESMF_ClockDestroy(clock2, rc=rc) ! ---------------------------------------------------------------------------- !EX_UTest !Test Fractional Time Alarms 1 write(failMsg, *) " Did not return nstep=8, and ESMF_SUCCESS" write(name, *) "Fractional Time Alarm Test 1" call ESMF_TimeIntervalSet(timeStep, ms=10, rc=rc) call ESMF_TimeIntervalSet(alarmStep, ms=100, rc=rc) call ESMF_TimeSet(startTime, yy=1999, mm=12, dd=31, h=23, m=59, s=59, & calendar=gregorianCalendar, rc=rc) call ESMF_TimeSet(stopTime, yy=2000, mm=1, dd=1, & calendar=gregorianCalendar, rc=rc) clock2=ESMF_ClockCreate(timeStep, startTime, stopTime=stopTime, & name="Clock 2", rc=rc) call ESMF_TimeSet(alarmTime, yy=1999, mm=12, dd=31, h=23, m=59, s=59, & ms=200, calendar=gregorianCalendar, rc=rc) alarm4 = ESMF_AlarmCreate(clock=clock2, ringTime=alarmTime, & ringInterval=alarmStep, rc=rc) ! number of clock time steps alarm rings for nstep = 0 ! run the clock do while (.not. ESMF_ClockIsStopTime(clock2, rc=rc)) if (ESMF_AlarmIsRinging(alarm4)) then nstep = nstep + 1 call ESMF_AlarmRingerOff(alarm4) endif call ESMF_ClockAdvance(clock2, rc=rc) enddo call ESMF_Test((rc.eq.ESMF_SUCCESS).and.(nstep.eq.8), & name, failMsg, result, ESMF_SRCLINE) call ESMF_AlarmDestroy(alarm4, rc=rc) call ESMF_ClockDestroy(clock2, rc=rc) ! ---------------------------------------------------------------------------- !EX_UTest !Test Fractional Time Alarms 2 write(failMsg, *) " Did not return nstep=4, and ESMF_SUCCESS" write(name, *) "Fractional Time Alarm Test 2" call ESMF_TimeIntervalSet(timeStep, sN=-22, sD=7, rc=rc) call ESMF_TimeIntervalSet(alarmStep, sN=-44, sD=7, rc=rc) call ESMF_TimeSet(startTime, yy=2000, mm=1, dd=1, & calendar=gregorianCalendar, rc=rc) call ESMF_TimeSet(stopTime, yy=1999, mm=12, dd=31, h=23, m=59, s=28, & sN=4, sD=7, calendar=gregorianCalendar, rc=rc) clock2=ESMF_ClockCreate(timeStep, startTime, stopTime=stopTime, & name="Clock 2", rc=rc) call ESMF_TimeSet(alarmTime, yy=1999, mm=12, dd=31, h=23, m=59, s=53, & sN=2, sD=7, calendar=gregorianCalendar, rc=rc) alarm4 = ESMF_AlarmCreate(clock=clock2, ringTime=alarmTime, & ringInterval=alarmStep, rc=rc) !print *, "stopTime = " !call ESMF_TimePrint(stopTime) !print *, "alarmTime = " !call ESMF_TimePrint(alarmTime) !print *, "timeStep = " !call ESMF_TimeIntervalPrint(timeStep) !print *, "alarmStep = " !call ESMF_TimeIntervalPrint(alarmStep) ! number of clock time steps alarm rings for nstep = 0 ! run the clock do while (.not. ESMF_ClockIsStopTime(clock2, rc=rc)) if (ESMF_AlarmIsRinging(alarm4)) then nstep = nstep + 1 call ESMF_AlarmRingerOff(alarm4) endif call ESMF_ClockAdvance(clock2, rc=rc) enddo call ESMF_Test((rc.eq.ESMF_SUCCESS).and.(nstep.eq.4), & name, failMsg, result, ESMF_SRCLINE) call ESMF_AlarmDestroy(alarm4, rc=rc) call ESMF_ClockDestroy(clock2, rc=rc) ! ---------------------------------------------------------------------------- !EX_UTest !Test Alarm ringTime = clock startTime => should ring immediately ! upon alarm creation. write(failMsg, *) " Did not return alarm ringing and ESMF_SUCCESS" write(name, *) "Test Alarm ringTime = Clock startTime" call ESMF_TimeIntervalSet(timeStep, ms=10, rc=rc) call ESMF_TimeSet(startTime, yy=1999, mm=12, dd=31, h=23, m=59, s=59, & calendar=gregorianCalendar, rc=rc) call ESMF_TimeSet(stopTime, yy=2000, mm=1, dd=1, & calendar=gregorianCalendar, rc=rc) clock2=ESMF_ClockCreate(timeStep, startTime, stopTime=stopTime, & name="Clock 2", rc=rc) alarm4 = ESMF_AlarmCreate(clock=clock2, ringTime=startTime, rc=rc) bool = ESMF_AlarmIsRinging(alarm4) call ESMF_Test((bool.and.rc.eq.ESMF_SUCCESS), & name, failMsg, result, ESMF_SRCLINE) call ESMF_AlarmDestroy(alarm4, rc=rc) call ESMF_ClockDestroy(clock2, rc=rc) ! ---------------------------------------------------------------------------- !EX_UTest !Test Alarm ringTime = clock startTime *and* ringInterval specified ! upon alarm creation => should ring immediately. Test 1 ! From Tom Black in Support ticket 1989990. write(failMsg, *) " Did not return alarm ringing and ESMF_SUCCESS" write(name, *) "Alarm ringTime = Clock startTime with ringInterval, test 1" call ESMF_TimeIntervalSet(timeStep, m=2, rc=rc) call ESMF_TimeIntervalSet(alarmStep, s=60, rc=rc) call ESMF_TimeSet(startTime, yy=2007, mm=9, dd=18, & calendar=gregorianCalendar, rc=rc) call ESMF_TimeSet(stopTime, yy=2007, mm=9, dd=19, & calendar=gregorianCalendar, rc=rc) clock2=ESMF_ClockCreate(timeStep, startTime, stopTime=stopTime, & name="Clock 2", rc=rc) alarm4 = ESMF_AlarmCreate(clock=clock2, ringTime=startTime, & ringInterval=alarmStep, rc=rc) call ESMF_AlarmGet(alarm4, ringTime=alarmTime, rc=rc) bool = ESMF_AlarmIsRinging(alarm4) call ESMF_Test(((alarmTime==startTime+alarmStep).and.bool.and. & rc.eq.ESMF_SUCCESS), name, failMsg, result, ESMF_SRCLINE) call ESMF_AlarmDestroy(alarm4, rc=rc) call ESMF_ClockDestroy(clock2, rc=rc) ! ---------------------------------------------------------------------------- !EX_UTest !Test Alarm ringTime = clock startTime *and* ringInterval specified ! upon alarm creation => should ring immediately. Test 2 ! From Tom Black in Support ticket 1989990. write(failMsg, *) " Did not return alarm ringing 21 times and ESMF_SUCCESS" write(name, *) "Alarm ringTime = Clock startTime with ringInterval, test 2" ! any single failure will cause the whole test to fail testPass = .true. call ESMF_TimeIntervalSet(timeStep, s=60, rc=rc) call ESMF_TimeIntervalSet(runDuration, s=3600, rc=rc) call ESMF_TimeIntervalSet(alarmStep, s=180, rc=rc) call ESMF_TimeSet(startTime, yy=2007, mm=9, dd=18, & calendar=gregorianCalendar, rc=rc) clock2=ESMF_ClockCreate(timeStep, startTime, & runDuration=runDuration, name="Clock 2", rc=rc) ! Tom Black's AlarmCreate() ... alarm4=ESMF_AlarmCreate( & name ='ALARM Recv from Parent' & !<-- Name of Alarm ,clock =clock2 & !<-- Each domain's ATM Driver Clock ,ringTime =startTime & !<-- First time the Alarm rings (ESMF) ,ringInterval =alarmStep & !<-- Recv from my parent at this ! frequency (ESMF) ,ringTimeStepCount=1 & !<-- The Alarm rings for this many ! timesteps ,sticky =.false. & !<-- Alarm does not ring until turned off ,rc =rc) ! run the clock ringCount = 0 do while (.not. ESMF_ClockIsStopTime(clock2, rc=rc)) call ESMF_ClockGet(clock2, advanceCount=forwardCount, rc=rc) !print *, "At clock timestep #", forwardCount call ESMF_AlarmGet(alarm4, clock=clock1, rc=rc) call ESMF_ClockGet(clock1, currTime=currentTime2, rc=rc) !print *, "Alarm's clock's currTime ..." !call ESMF_TimePrint(currentTime2, options="string", rc=rc) if (clock2 /= clock1) then testPass = .false. !print *, "Alarm's clock and domain clock are *not* the same" endif call ESMF_ClockGet(clock2, currTime=currentTime, prevTime=prevTime, & rc=rc) !print *, "Clock's currTime and prevTime ..." !call ESMF_TimePrint(currentTime, options="string", rc=rc) !call ESMF_TimePrint(prevTime, options="string", rc=rc) if (currentTime /= currentTime2) then testPass = .false. !print *, "Alarm's clock's currTime is *not* the same as the domain clock's currTime" endif call ESMF_AlarmGet(alarm4, ringTime=alarmTime, rc=rc) !print *, "Alarm's ringTime ..." !call ESMF_TimePrint(alarmTime, options="string", rc=rc) if (ESMF_AlarmIsRinging(alarm=alarm4, rc=rc)) then ringCount = ringCount + 1 !print *, " Alarm is ringing" if (alarmTime /= currentTime+alarmStep) then testPass = .false. !print *, " Alarm ringTime *not* equal to clock currTime + alarmStep" endif endif call ESMF_ClockAdvance(clock2, rc=rc) enddo call ESMF_ClockGet(clock2, advanceCount=forwardCount, rc=rc) !print *, "End of clock run: At clock timestep #", forwardCount if (ESMF_AlarmIsRinging(alarm=alarm4, rc=rc)) then !print *, " Alarm is ringing" ringCount = ringCount + 1 endif ! Alarm should have rung 21 times, including from timestep 0 (upon alarm ! creation) through timestep 60 (end of clock run) inclusive. ! Final ringTime should be one alarmStep past the clock end time. call ESMF_AlarmGet(alarm4, ringTime=alarmTime, rc=rc) call ESMF_Test(((alarmTime==startTime+runDuration+alarmStep).and. & ringCount==21.and.testPass.and. & rc.eq.ESMF_SUCCESS), name, failMsg, result, ESMF_SRCLINE) !print *, "Alarm rang ", ringCount, " times." !print *, "Alarm's final ringTime, after final clockAdvance() ..." !call ESMF_TimePrint(alarmTime, options="string", rc=rc) call ESMF_AlarmDestroy(alarm4, rc=rc) call ESMF_ClockDestroy(clock2, rc=rc) ! ---------------------------------------------------------------------------- !EX_UTest !Test Alarm ringTime = clock startTime *and* ringInterval specified ! upon alarm creation => should ring immediately. Test 3, test REVERSE ! back to clock starttime. Robustness test for solution to ! Tom Black problem in Support ticket 1989990. write(failMsg, *) " Did not return alarm ringing 41 times and ESMF_SUCCESS" write(name, *) "Alarm ringTime = Clock startTime with ringInterval, test 3 (reverse)" call ESMF_TimeIntervalSet(timeStep, s=60, rc=rc) call ESMF_TimeIntervalSet(runDuration, s=3600, rc=rc) call ESMF_TimeIntervalSet(alarmStep, s=180, rc=rc) call ESMF_TimeSet(startTime, yy=2007, mm=9, dd=18, & calendar=gregorianCalendar, rc=rc) clock2=ESMF_ClockCreate(timeStep, startTime, & runDuration=runDuration, name="Clock 2", rc=rc) ! like Tom Black's AlarmCreate(), but sticky alarm4=ESMF_AlarmCreate( & name ='ALARM Recv from Parent' & !<-- Name of Alarm ,clock =clock2 & !<-- Each domain's ATM Driver Clock ,ringTime =startTime & !<-- First time the Alarm rings (ESMF) ,ringInterval =alarmStep & !<-- Recv from my parent at this ! frequency (ESMF) ,rc =rc) ! number of clock time steps alarm rings for nring = 0 ! number of times the clock has been run nclock = 0 do while (nclock < 2) ! run the clock do while (.not. ESMF_ClockIsDone(clock2, rc=rc)) if (ESMF_AlarmIsRinging(alarm4)) then nring = nring + 1 !print *, "on" call ESMF_AlarmRingerOff(alarm4, rc=rc) else !print *, "off" endif call ESMF_ClockAdvance(clock2, rc=rc) enddo if (nclock.eq.0) then call ESMF_ClockGet(clock2, direction=forwardDirection, & advanceCount=forwardCount, rc=rc) !print *, "forwardCount = ", forwardCount else call ESMF_ClockGet(clock2, direction=reverseDirection, & advanceCount=reverseCount, rc=rc) !print *, "reverseCount = ", reverseCount endif call ESMF_ClockSet(clock2, direction=ESMF_DIRECTION_REVERSE, rc=rc) nclock = nclock + 1 enddo ! count ring at the end point if (ESMF_AlarmIsRinging(alarm4)) then nring = nring + 1 !print *, "on" call ESMF_AlarmRingerOff(alarm4, rc=rc) else !print *, "off" endif call ESMF_Test((rc.eq.ESMF_SUCCESS).and.(nring.eq.41).and. & (forwardCount.eq.60).and.(reverseCount.eq.0).and. & (forwardDirection.eq.ESMF_DIRECTION_FORWARD).and. & (reverseDirection.eq.ESMF_DIRECTION_REVERSE).and. & ESMF_ClockIsReverse(clock2), & name, failMsg, result, ESMF_SRCLINE) !print *, "nring = ", nring, " nclock = ", nclock call ESMF_AlarmDestroy(alarm4, rc=rc) call ESMF_ClockDestroy(clock2, rc=rc) ! ---------------------------------------------------------------------------- !EX_UTest !Test Alarm ringTime = clock startTime *and* ringInterval specified ! upon alarm creation *and* after clock restored from restart state -- ! with 2 calls to ESMF_ClockSet() -- should ring immediately. ! This approach to restart will become obsolete with the implementation ! of WriteRestart()/ReadStart(), but it should remain technically valid, ! along with this unit test. From Ratko Vasic in ticket #2685243. write(failMsg, *) " Did not return alarm ringing and ESMF_SUCCESS" write(name, *) "Alarm ringTime = Clock startTime with ringInterval, after clock restore" call ESMF_TimeIntervalSet(timeStep, m=3, rc=rc) call ESMF_TimeIntervalSet(TIMEINTERVAL_HISTORY, h=3, rc=rc) call ESMF_TimeSet(startTime, mm=9, dd=18, yy=2007, & calendar=gregorianCalendar, rc=rc) call ESMF_TimeSet(stopTime, mm=9, dd=19, yy=2007, & calendar=gregorianCalendar, rc=rc) call ESMF_TimeSet(currTime, mm=9, dd=18, yy=2007, h=12, & calendar=gregorianCalendar, rc=rc) CLOCK_ATM=ESMF_ClockCreate( & name ='CLOCK_ATM' & !<-- The ATM Clock's name ,timeStep =timeStep & !<-- The fundamental timestep in ! this component ,startTime =startTime & !<-- Start time of simulation ,stopTime =stopTime & !<-- Stop time of simulation ,rc =rc) ! 1st ClockSet() to reset currTime and advanceCount for restart call ESMF_ClockSet( & clock =CLOCK_ATM & !<-- The ATM Component's Clock ,currtime =currTime & !<-- Current time of simulation ,advanceCount=240_ESMF_KIND_I8 & !<-- Timestep at this current time ,rc =rc) ! 2nd ClockSet() with same values that CLOCK_ATM already has; should ! have no affect call ESMF_ClockSet(clock =CLOCK_ATM & ,currtime =currTime & ,starttime=startTime & ,rc =rc) !call ESMF_ClockPrint(CLOCK_ATM, rc=rc) ALARM_HISTORY=ESMF_AlarmCreate( & name ='ALARM_HISTORY' & ,clock =CLOCK_ATM & ! <-- ATM Clock ,ringTime =currTime & ! <-- Forecast/Restart start ! time (ESMF) ,ringInterval =TIMEINTERVAL_HISTORY & ! <-- Time interval between ,ringTimeStepCount=1 & ! <-- The Alarm rings for ! this many timesteps ,sticky =.false. & ! <-- Alarm does not ring ! until turned off ,rc =rc) !call ESMF_AlarmPrint(ALARM_HISTORY, rc=rc) call ESMF_AlarmGet(ALARM_HISTORY, ringTime=alarmTime, rc=rc) bool = ESMF_AlarmIsRinging(ALARM_HISTORY) call ESMF_Test(((alarmTime==currTime+TIMEINTERVAL_HISTORY).and.bool & .and. rc.eq.ESMF_SUCCESS), & name, failMsg, result, ESMF_SRCLINE) call ESMF_AlarmDestroy(ALARM_HISTORY, rc=rc) call ESMF_ClockDestroy(CLOCK_ATM, rc=rc) ! ---------------------------------------------------------------------------- !EX_UTest !Test Alarm list re-allocation within clock, part 1 write(failMsg, *) " Did not return ESMF_SUCCESS" write(name, *) "Alarm list reallocation Test 1" call ESMF_TimeIntervalSet(timeStep, ms=10, rc=rc) call ESMF_TimeIntervalSet(alarmStep, ms=100, rc=rc) call ESMF_TimeSet(startTime, yy=1999, mm=12, dd=31, h=23, m=59, s=59, & calendar=gregorianCalendar, rc=rc) call ESMF_TimeSet(stopTime, yy=2000, mm=1, dd=1, & calendar=gregorianCalendar, rc=rc) clock2=ESMF_ClockCreate(timeStep, startTime, stopTime=stopTime, & name="Clock 2", rc=rc) call ESMF_TimeSet(alarmTime, yy=1999, mm=12, dd=31, h=23, m=59, s=59, & ms=200, calendar=gregorianCalendar, rc=rc) ! fill up clock's alarmList do i=1,200 alarm5(i) = ESMF_AlarmCreate(clock=clock2, ringTime=alarmTime, & ringInterval=alarmStep, rc=rc) enddo ! add one more alarm than there is space for (200), forcing a ! reallocation to 400 alarms ! also, set 201st alarm to be the first to ring upon the 1st timestep call ESMF_TimeSet(alarmTime, yy=1999, mm=12, dd=31, h=23, m=59, s=59, & ms=10, calendar=gregorianCalendar, rc=rc) alarm4 = ESMF_AlarmCreate(name="201st Alarm", clock=clock2, & ringTime=alarmTime, ringInterval=alarmStep, & rc=rc) ! see if the 201st alarm was successfully added to the clock call ESMF_Test((rc.eq.ESMF_SUCCESS), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest !Test Alarm list re-allocation within clock, part 2 write(failMsg, *) " Did not return 201 alarms and name '201st Alarm'" write(name, *) "Alarm list reallocation Test 2" call ESMF_ClockGetAlarmList(clock2, ESMF_ALARMLIST_ALL, & alarmList=alarmList, & alarmCount=alarmCount, rc=rc) write(*,*) "rc=",rc call ESMF_AlarmGet(alarmList(alarmCount), name=aName, rc=rc) !print *, "alarmCount = ", alarmCount !print *, "201st alarm name = ", aName write(*,*) "rc=",rc ! see if we have 201 alarms and if the 201st alarm has the right name! call ESMF_Test((alarmCount.eq.201).and.(aName.eq."201st Alarm") & .and.(rc.eq.ESMF_SUCCESS), & name, failMsg, result, ESMF_SRCLINE) ! ---------------------------------------------------------------------------- !EX_UTest !Test Alarm list re-allocation within clock, part 3 write(failMsg, *) " Did not return 201st alarm ringing" write(name, *) "Alarm list reallocation Test 3" call ESMF_ClockAdvance(clock2, rc=rc) call ESMF_ClockGetAlarmList(clock2, ESMF_ALARMLIST_RINGING, & alarmList=alarmList, & alarmCount=alarmCount, rc=rc) ! double check ringing with Alarm API call isringing = ESMF_AlarmIsRinging(alarm4, rc=rc) !print *, "alarmCount = ", alarmCount call ESMF_AlarmGet(alarmList(alarmCount), name=aName, rc=rc) !print *, "Ringing alarm name = ", trim(aName), ", is ringing = ", & !isringing ! see if the 201st alarm is the only one ringing call ESMF_Test(isringing.and.(alarmCount.eq.1) & .and.(aName.eq."201st Alarm") & .and.(rc.eq.ESMF_SUCCESS), & name, failMsg, result, ESMF_SRCLINE) ! cleanup do i=1,200 call ESMF_AlarmDestroy(alarm5(i), rc=rc) enddo call ESMF_AlarmDestroy(alarm4, rc=rc) call ESMF_ClockDestroy(clock2, rc=rc) ! ---------------------------------------------------------------------------- !EX_UTest ! Based on reproducer clocktester.F90 from Atanas. See bug #1531948. write(failMsg, *) " Did not ring enough times during forward/backward march" write(name, *) "Test ESMF_DIRECTION_FORWARD to a non-sticky alarm " // & "point, ESMF_DIRECTION_REVERSE, ESMF_DIRECTION_FORWARD" testPass = .true. call ESMF_TimeSet (startTime, yy=2009, mm=1, dd=1, & calendar=gregorianCalendar, rc=rc) call ESMF_TimeSet (stopTime, yy=2009, mm=1, dd=2, h=0, & calendar=gregorianCalendar, rc=rc) call ESMF_TimeIntervalSet (timeStep, s=3600, rc=rc) clock = ESMF_ClockCreate(timeStep, startTime, stopTime=stopTime, & name="ApplClock", rc=rc) if (rc /= ESMF_SUCCESS) testPass = .false. call ESMF_TimeIntervalSet (alarmStep, s=7200, rc=rc) !call ESMF_TimeIntervalSet(ringDuration, h=1, rc=rc) !call ESMF_TimeSet(alarmStopTime, yy=2009, mm=1, dd=1, h=21, & ! calendar=gregorianCalendar, rc=rc) alarm1 = ESMF_AlarmCreate (clock=clock, & ringTime=startTime, ringInterval=alarmStep, & ! ringDuration=ringDuration, & ! stopTime=alarmStopTime, & sticky=.false., name="testAlarm", rc=rc) if (testPass .and. rc /= ESMF_SUCCESS) testPass = .false. !call ESMF_AlarmPrint(alarm1, options="ringduration string", rc=rc) !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) !call ESMF_AlarmPrint(alarm1, options="ringtimestepcount string", rc=rc) !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) alarmCount = 0 expectedCount = 22 do !print *, "***********************Top of loop 1 **********************" !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) !call ESMF_ClockPrint(clock, options="currtime string", rc=rc) !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) if (ESMF_AlarmIsRinging(alarm1, rc=rc)) then alarmCount = alarmCount + 1 !print *, "alarm1 is ringing" !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) !call ESMF_AlarmRingerOff(alarm1, rc=rc) endif !call ESMF_AlarmPrint(alarm1, options="ringbegin string", rc=rc) !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) !call ESMF_AlarmPrint(alarm1, options="ringtime string", rc=rc) !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) !call ESMF_AlarmPrint(alarm1, options="ringend string", rc=rc) !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) call ESMF_ClockAdvance(clock, rc=rc) !call ESMF_AlarmPrint(alarm1, options="ringend string", rc=rc) !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) if (ESMF_ClockIsStopTime(clock, rc=rc)) exit enddo !print *, "At end of 1st forward run, alarmCount = ", alarmCount !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) call ESMF_ClockSet(clock, direction=ESMF_DIRECTION_REVERSE, rc=rc) i=0 do !print *, "***********************Top of loop 2 **********************" !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) !call ESMF_ClockPrint(clock, options="currtime string", rc=rc) !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) if (ESMF_AlarmIsRinging(alarm1, rc=rc)) then alarmCount = alarmCount + 1 !print *, "alarm1 is ringing" !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) !call ESMF_AlarmRingerOff(alarm1, rc=rc) endif !call ESMF_AlarmPrint(alarm1, options="ringbegin string", rc=rc) !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) !call ESMF_AlarmPrint(alarm1, options="ringtime string", rc=rc) !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) call ESMF_ClockAdvance(clock, rc=rc) i = i+1 if (i == 5) exit enddo !print *, "At end of reverse run, alarmCount = ", alarmCount !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) call ESMF_ClockSet(clock, direction=ESMF_DIRECTION_FORWARD, rc=rc) i=0 do !print *, "***********************Top of loop 3 **********************" !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) !call ESMF_ClockPrint(clock, options="currtime string", rc=rc) !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) if (ESMF_AlarmIsRinging(alarm1, rc=rc)) then alarmCount = alarmCount + 1 !print *, "alarm1 is ringing" !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) !call ESMF_AlarmRingerOff(alarm1, rc=rc) endif !call ESMF_AlarmPrint(alarm1, options="ringbegin string", rc=rc) !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) !call ESMF_AlarmPrint(alarm1, options="ringtime string", rc=rc) !call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) call ESMF_ClockAdvance(clock, rc=rc) i = i+1 if (i == 15) exit enddo if (.not. testPass .or. alarmCount /= expectedCount) then if (.not. testPass) print *, 'bad return codes discovered' write (failMsg,*) trim (failMsg), ', alarmCount = ', alarmCount, ', expected = ', expectedCount print *, 'The alarm ringTime may be stuck at:' call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) call ESMF_AlarmPrint (alarm1, options="ringTime string", rc=rc) call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) end if call ESMF_Test (testPass .and. alarmCount == expectedCount, & name, failMsg, result, ESMF_SRCLINE) call ESMF_UtilIOUnitFlush(ESMF_UtilIOStdout) call ESMF_AlarmDestroy (alarm1, rc=rc) call ESMF_ClockDestroy (clock, rc=rc) ! ---------------------------------------------------------------------------- !EX_UTest !Test Alarm ringTime increment, first forwards a fixed number of !timesteps, stopping at an alarm ringing time step. !Using ESMF_DIRECTION_REVERSE, step backwards to some time prior to the !clock's startTime. Then go ESMF_DIRECTION_FORWARD to one step past an !alarm ringing time step, and then ESMF_DIRECTION_REVERSE once more. ! Count number of rings. See bug #1531948. write(failMsg, *) " Did not ring enough times during forward/backward march" write(name, *) "Test ESMF_DIRECTION_FORWARD to an alarm point, " // & "ESMF_DIRECTION_REVERSE, ESMF_DIRECTION_FORWARD, " // & "ESMF_DIRECTION_REVERSE" testPass = .true. call ESMF_TimeSet (startTime, yy=2008, mm=1, dd=23, h=0, & calendar=gregorianCalendar, rc=rc) !call ESMF_TimePrint (startTime, options="string isofrac", rc=rc) call ESMF_TimeIntervalSet (timeStep, h=3, rc=rc) clock = ESMF_ClockCreate(startTime = startTime, timeStep=timeStep, & name="clock 1", rc=rc) if (rc /= ESMF_SUCCESS) testPass = .false. call ESMF_TimeSet (alarmTime, yy=2008, mm=1, dd=23, h=6, & calendar=gregorianCalendar, rc=rc) call ESMF_TimeIntervalSet (alarmStep, h=6, rc=rc) alarm1 = ESMF_AlarmCreate ( & name="Alarm 1", clock=clock, & ringTime=alarmTime, ringInterval=alarmStep, rc=rc) if (testPass .and. rc /= ESMF_SUCCESS) testPass = .false. alarmCount = 0 expectedCount = 11 do, i=1,6 call ESMF_ClockAdvance (clock, rc=rc) !call ESMF_ClockPrint (clock, options="currTime string", rc=rc) if (testPass .and. rc /= ESMF_SUCCESS) testPass = .false. if (ESMF_alarmIsRinging (alarm1)) then alarmCount = alarmCount + 1 !print *, 'alarm IS ringing at forwards timestep', i call ESMF_AlarmRingerOff (alarm1, rc=rc) else !print *, 'alarm not ringing at forwards timestep', i end if end do !print *, 'SETTING CLOCK BACKWARDS' call ESMF_ClockSet (clock, direction=ESMF_DIRECTION_REVERSE, rc=rc) if (testPass .and. rc /= ESMF_SUCCESS) testPass = .false. do, i=5, -5, -1 call ESMF_ClockAdvance (clock, rc=rc) !call ESMF_ClockPrint (clock, options="currTime string", rc=rc) if (testPass .and. rc /= ESMF_SUCCESS) testPass = .false. if (ESMF_alarmIsRinging (alarm1)) then alarmCount = alarmCount + 1 !print *, 'alarm IS ringing at backwards timestep', i call ESMF_AlarmRingerOff (alarm1, rc=rc) !call ESMF_AlarmPrint(alarm1, options="ringTime string", rc=rc) else !print *, 'alarm not ringing at backwards timestep', i !call ESMF_ClockPrint (clock, options="currTime string", rc=rc) end if end do !print *, 'SETTING CLOCK FORWARDS' call ESMF_ClockSet (clock, direction=ESMF_DIRECTION_FORWARD, rc=rc) if (testPass .and. rc /= ESMF_SUCCESS) testPass = .false. do, i=-4,7 call ESMF_ClockAdvance (clock, rc=rc) !call ESMF_ClockPrint (clock, options="currTime string", rc=rc) if (testPass .and. rc /= ESMF_SUCCESS) testPass = .false. if (ESMF_alarmIsRinging (alarm1)) then alarmCount = alarmCount + 1 !print *, 'alarm IS ringing at forwards timestep', i call ESMF_AlarmRingerOff (alarm1, rc=rc) else !print *, 'alarm not ringing at forwards timestep', i end if end do !print *, 'SETTING CLOCK BACKWARDS' call ESMF_ClockSet (clock, direction=ESMF_DIRECTION_REVERSE, rc=rc) if (testPass .and. rc /= ESMF_SUCCESS) testPass = .false. do, i=6, -5, -1 call ESMF_ClockAdvance (clock, rc=rc) !call ESMF_ClockPrint (clock, options="currTime string", rc=rc) if (testPass .and. rc /= ESMF_SUCCESS) testPass = .false. if (ESMF_alarmIsRinging (alarm1)) then alarmCount = alarmCount + 1 !print *, 'alarm IS ringing at backwards timestep', i call ESMF_AlarmRingerOff (alarm1, rc=rc) !call ESMF_AlarmPrint(alarm1, options="ringTime string", rc=rc) else !print *, 'alarm not ringing at backwards timestep', i !call ESMF_ClockPrint (clock, options="currTime string", rc=rc) end if end do if (.not. testPass .or. alarmCount /= expectedCount) then if (.not. testPass) print *, 'bad return codes discovered' write (failMsg,*) trim (failMsg), ', alarmCount = ', alarmCount, ', expected = ', expectedCount print *, 'The alarm ringTime may be stuck at:' call ESMF_AlarmPrint (alarm1, options="ringTime string", rc=rc) end if call ESMF_Test (testPass .and. alarmCount == expectedCount, & name, failMsg, result, ESMF_SRCLINE) call ESMF_AlarmDestroy (alarm1, rc=rc) call ESMF_ClockDestroy (clock, rc=rc) ! ---------------------------------------------------------------------------- !EX_UTest !Test Alarm ringTime increment, first forwards a fixed number of !timesteps, stopping at an alarm ringing time step. Using a negative !timestemp, step backwards to some time prior to the clock's startTime. !Count number of rings. See bugs #1531948, #1457135. write(failMsg, *) " Did not ring enough times during forward/backward march" write(name, *) "Test forward to an alarm point, then step backward using a negative timeStep" testPass = .true. call ESMF_TimeSet (startTime, yy=2008, mm=1, dd=23, h=0, & calendar=gregorianCalendar, rc=rc) call ESMF_TimeIntervalSet (timeStep, h=3, rc=rc) clock = ESMF_ClockCreate(startTime = startTime, timeStep=timeStep, & name="clock 1", rc=rc) if (rc /= ESMF_SUCCESS) testPass = .false. call ESMF_TimeSet (alarmTime, yy=2008, mm=1, dd=23, h=6, & calendar=gregorianCalendar, rc=rc) call ESMF_TimeIntervalSet (alarmStep, h=6, rc=rc) alarm1 = ESMF_AlarmCreate ( & name="Alarm 1", clock=clock, & ringTime=alarmTime, ringInterval=alarmStep, rc=rc) if (testPass .and. rc /= ESMF_SUCCESS) testPass = .false. alarmCount = 0 expectedCount = 8 do, i=1,6 call ESMF_ClockAdvance (clock, rc=rc) if (testPass .and. rc /= ESMF_SUCCESS) testPass = .false. if (ESMF_alarmIsRinging (alarm1)) then alarmCount = alarmCount + 1 !print *, 'alarm IS ringing at forwards timestep', i call ESMF_AlarmRingerOff (alarm1, rc=rc) else !print *, 'alarm not ringing at forwards timestep', i end if end do !print *, 'SETTING CLOCK BACKWARDS WITH NEGATIVE TIMESTEP' timeStep = -timeStep call ESMF_ClockSet (clock, timeStep=timeStep, rc=rc) if (testPass .and. rc /= ESMF_SUCCESS) testPass = .false. do, i=5, -5, -1 call ESMF_ClockAdvance (clock, rc=rc) if (testPass .and. rc /= ESMF_SUCCESS) testPass = .false. if (ESMF_alarmIsRinging (alarm1)) then alarmCount = alarmCount + 1 !print *, 'alarm IS ringing at backwards timestep', i, ', time:' !call ESMF_ClockPrint (clock, options="currTime string") call ESMF_AlarmRingerOff (alarm1, rc=rc) else !print *, 'alarm not ringing at backwards timestep', i !call ESMF_ClockPrint (clock, options="currTime string") end if end do if (.not. testPass .or. alarmCount /= expectedCount) then if (.not. testPass) print *, 'bad return codes discovered' write (failMsg,*) trim (failMsg), ', alarmCount = ', alarmCount, ', expected = ', expectedCount print *, 'The alarm ringTime may be stuck at:' call ESMF_AlarmPrint (alarm1, options="ringTime string", rc=rc) end if call ESMF_Test (testPass .and. alarmCount == expectedCount, & name, failMsg, result, ESMF_SRCLINE) call ESMF_AlarmDestroy (alarm1, rc=rc) call ESMF_ClockDestroy (clock, rc=rc) ! ---------------------------------------------------------------------------- !EX_UTest !Test Alarm ringTime increment, first forwards a fixed number of !timesteps, stopping at a non-alarm ringing time step. Using a negative !timestemp, step backwards to some time prior to the clock's startTime. !Count number of rings. See bugs #1531948, #1457135. write(failMsg, *) " Did not ring enough times during forward/backward march" write(name, *) "Test forward to a non-ringing step, then step backward using a negative timeStep" testPass = .true. call ESMF_TimeSet (startTime, yy=2008, mm=1, dd=23, h=0, & calendar=gregorianCalendar, rc=rc) call ESMF_TimeIntervalSet (timeStep, h=3, rc=rc) clock = ESMF_ClockCreate(startTime = startTime, timeStep=timeStep, & name="clock 1", rc=rc) if (rc /= ESMF_SUCCESS) testPass = .false. call ESMF_TimeSet (alarmTime, yy=2008, mm=1, dd=23, h=6, & calendar=gregorianCalendar, rc=rc) call ESMF_TimeIntervalSet (alarmStep, h=6, rc=rc) alarm1 = ESMF_AlarmCreate ( & name="Alarm 1", clock=clock, & ringTime=alarmTime, ringInterval=alarmStep, rc=rc) if (testPass .and. rc /= ESMF_SUCCESS) testPass = .false. alarmCount = 0 expectedCount = 9 do, i=1,7 call ESMF_ClockAdvance (clock, rc=rc) if (testPass .and. rc /= ESMF_SUCCESS) testPass = .false. if (ESMF_alarmIsRinging (alarm1)) then alarmCount = alarmCount + 1 !print *, 'alarm IS ringing at forwards timestep', i call ESMF_AlarmRingerOff (alarm1, rc=rc) else !print *, 'alarm not ringing at forwards timestep', i end if end do !print *, 'SETTING CLOCK BACKWARDS WITH NEGATIVE TIMESTEP' timeStep = -timeStep call ESMF_ClockSet (clock, timeStep=timeStep, rc=rc) if (testPass .and. rc /= ESMF_SUCCESS) testPass = .false. do, i=6, -5, -1 call ESMF_ClockAdvance (clock, rc=rc) if (testPass .and. rc /= ESMF_SUCCESS) testPass = .false. if (ESMF_alarmIsRinging (alarm1)) then alarmCount = alarmCount + 1 !print *, 'alarm IS ringing at backwards timestep', i, ', time:' !call ESMF_ClockPrint (clock, options="currTime string") call ESMF_AlarmRingerOff (alarm1, rc=rc) else !print *, 'alarm not ringing at backwards timestep', i !call ESMF_ClockPrint (clock, options="currTime string") end if end do if (.not. testPass .or. alarmCount /= expectedCount) then if (.not. testPass) print *, 'bad return codes discovered' write (failMsg,*) trim (failMsg), ', alarmCount = ', alarmCount, ', expected = ', expectedCount print *, 'The alarm ringTime may be stuck at:' call ESMF_AlarmPrint (alarm1, options="ringTime string", rc=rc) end if call ESMF_Test (testPass .and. alarmCount == expectedCount, & name, failMsg, result, ESMF_SRCLINE) ! ! ---------------------------------------------------------------------------- !EX_UTest write(failMsg, *) " Did not show null clock in alarm" write(name, *) "Test alarm after destroying its associated clock" call ESMF_ClockDestroy (clock, rc=rc) willRingNext = ESMF_AlarmWillRingNext(alarm1, rc=rc) call ESMF_Test (rc==ESMC_RC_PTR_NULL .and. .not.willRingNext, & name, failMsg, result, ESMF_SRCLINE) call ESMF_AlarmDestroy (alarm1, rc=rc) ! ---------------------------------------------------------------------------- !EX_UTest !Test Alarm ringTime increment, arbitrarily forwards and backwards using ! positive and negative timesteps. Alarm ringTime and ringInterval are ! changed with each change in timestep direction. The extent of the run ! of each timestep value is different with each change in direction. write(failMsg, *) " Did not ring enough times during arbitrary forward/backward march" write(name, *) "Test arbitrary positive/negative timeStep runs with differing alarms" testPass = .true. alarmCountPass = .true. call ESMF_TimeSet (startTime, yy=2008, mm=1, dd=23, h=0, & calendar=gregorianCalendar, rc=rc) call ESMF_TimeIntervalSet (timeStep, h=1, rc=rc) clock = ESMF_ClockCreate(startTime=startTime, timeStep=timeStep, & name="clock 1", rc=rc) if (rc /= ESMF_SUCCESS) testPass = .false. call ESMF_TimeSet (alarmTime, yy=2008, mm=1, dd=23, h=2, & calendar=gregorianCalendar, rc=rc) call ESMF_TimeIntervalSet (alarmStep, h=2, rc=rc) alarm1 = ESMF_AlarmCreate ( & name="Alarm 1", clock=clock, & ringTime=alarmTime, ringInterval=alarmStep, rc=rc) if (testPass .and. rc /= ESMF_SUCCESS) testPass = .false. alarmCount = 0 expectedCount = 15 do, i=1,7 call ESMF_ClockAdvance (clock, rc=rc) !call ESMF_ClockPrint (clock, options="currTime string", rc=rc) if (testPass .and. rc /= ESMF_SUCCESS) testPass = .false. if (ESMF_alarmIsRinging (alarm1)) then alarmCount = alarmCount + 1 !print *, 'alarm IS ringing at forwards timestep', i call ESMF_AlarmRingerOff (alarm1, rc=rc) else !print *, 'alarm not ringing at forwards timestep', i end if end do if (alarmCountPass .and. alarmCount /= 3) then alarmCountPass = .false. !print *, 'alarmCount = ', alarmCount, ' not 3 at 1st turnaround point' end if !print *, 'SETTING CLOCK BACKWARDS WITH NEW NEGATIVE TIMESTEP AND RINGINTERVAL' timeStep = -2 * timeStep alarmStep = -2 * alarmStep call ESMF_ClockSet (clock, timeStep=timeStep, rc=rc) call ESMF_AlarmSet (alarm1, ringInterval=alarmStep, rc=rc) if (testPass .and. rc /= ESMF_SUCCESS) testPass = .false. do, i=6, -5, -1 call ESMF_ClockAdvance (clock, rc=rc) !call ESMF_ClockPrint (clock, options="currTime string", rc=rc) if (testPass .and. rc /= ESMF_SUCCESS) testPass = .false. if (ESMF_alarmIsRinging (alarm1)) then alarmCount = alarmCount + 1 !print *, 'alarm IS ringing at backwards timestep', i call ESMF_AlarmRingerOff (alarm1, rc=rc) else !print *, 'alarm not ringing at backwards timestep', i end if end do if (alarmCountPass .and. alarmCount /= 9) then alarmCountPass = .false. !print *, 'alarmCount = ', alarmCount, ' not 9 at 2nd turnaround point' end if !print *, 'SETTING CLOCK FORWARDS WITH NEW POSITIVE TIMESTEP, RINGINTERVAL, and RINGTIME' call ESMF_TimeIntervalSet (timeStep, h=3, rc=rc) call ESMF_TimeSet (alarmTime, yy=2008, mm=1, dd=22, h=11, & calendar=gregorianCalendar, rc=rc) call ESMF_TimeIntervalSet (alarmStep, h=6, rc=rc) call ESMF_ClockSet (clock, timeStep=timeStep, rc=rc) call ESMF_AlarmSet (alarm1, ringTime=alarmTime, ringInterval=alarmStep, & rc=rc) if (testPass .and. rc /= ESMF_SUCCESS) testPass = .false. do, i=1,5 call ESMF_ClockAdvance (clock, rc=rc) !call ESMF_ClockPrint (clock, options="currTime string", rc=rc) if (testPass .and. rc /= ESMF_SUCCESS) testPass = .false. if (ESMF_alarmIsRinging (alarm1)) then alarmCount = alarmCount + 1 !print *, 'alarm IS ringing at forwards timestep', i call ESMF_AlarmRingerOff (alarm1, rc=rc) else !print *, 'alarm not ringing at forwards timestep', i end if end do if (alarmCountPass .and. alarmCount /= 11) then alarmCountPass = .false. !print *, 'alarmCount = ', alarmCount, ' not 11 at 3rd turnaround point' end if !print *, 'SETTING CLOCK BACKWARDS WITH NEW NEGATIVE TIMESTEP AND RINGTIME' call ESMF_TimeIntervalSet (timeStep, h=-1, rc=rc) call ESMF_TimeSet (alarmTime, yy=2008, mm=1, dd=22, h=21, & calendar=gregorianCalendar, rc=rc) call ESMF_ClockSet (clock, timeStep=timeStep, rc=rc) call ESMF_AlarmSet (alarm1, ringTime=alarmTime, rc=rc) if (testPass .and. rc /= ESMF_SUCCESS) testPass = .false. do, i=4,2,-1 call ESMF_ClockAdvance (clock, rc=rc) !call ESMF_ClockPrint (clock, options="currTime string", rc=rc) if (testPass .and. rc /= ESMF_SUCCESS) testPass = .false. if (ESMF_alarmIsRinging (alarm1)) then alarmCount = alarmCount + 1 !print *, 'alarm IS ringing at backwards timestep', i call ESMF_AlarmRingerOff (alarm1, rc=rc) else !print *, 'alarm not ringing at backwards timestep', i end if end do if (alarmCountPass .and. alarmCount /= 12) then alarmCountPass = .false. !print *, 'alarmCount = ', alarmCount, ' not 12 at 4th turnaround point' end if !print *, 'SETTING CLOCK FORWARDS WITH NEW POSITIVE TIMESTEP' timeStep = -timeStep call ESMF_ClockGet(clock, currTime=startTime, rc=rc) call ESMF_ClockSet(clock, timeStep=timeStep, startTime=startTime, & runTimeStepCount=15, rc=rc) if (testPass .and. rc /= ESMF_SUCCESS) testPass = .false. do while (.not. ESMF_ClockIsDone(clock, rc=rc)) call ESMF_ClockAdvance (clock, rc=rc) !call ESMF_ClockPrint (clock, options="currTime string", rc=rc) if (testPass .and. rc /= ESMF_SUCCESS) testPass = .false. if (ESMF_alarmIsRinging (alarm1)) then alarmCount = alarmCount + 1 !print *, 'alarm IS ringing' call ESMF_AlarmRingerOff (alarm1, rc=rc) else !print *, 'alarm not ringing' end if end do if (alarmCountPass .and. alarmCount /= expectedCount) then alarmCountPass = .false. !print *, 'alarmCount = ', alarmCount, ', not ', expectedCount, ' at the end' end if if (.not. alarmCountPass) then write(failMsg,*) trim(failMsg), ', alarmCount incorrect at one or more turnaround points' !print *, 'Final alarmCount = ', alarmCount, ', expected = ', expectedCount !print *, 'Final alarm ringTime:' !call ESMF_AlarmPrint (alarm1, "ringTime string", rc=rc) end if if (.not. testPass) print *, 'bad return codes discovered' call ESMF_Test (testPass .and. alarmCountPass, & name, failMsg, result, ESMF_SRCLINE) call ESMF_AlarmDestroy (alarm1, rc=rc) call ESMF_ClockDestroy (clock, rc=rc) ! ---------------------------------------------------------------------------- #endif ! destroy calendars call ESMF_CalendarDestroy(esmf_360dayCalendar, rc=rc) call ESMF_CalendarDestroy(no_leapCalendar, rc=rc) call ESMF_CalendarDestroy(julianCalendar, rc=rc) call ESMF_CalendarDestroy(gregorianCalendar, rc=rc) ! finalize ESMF framework call ESMF_TestEnd(result, ESMF_SRCLINE) end program ESMF_AlarmTest