********************************************************** Welcome to XBeach version 1.22.Range 5157 Not mixed revisions and with local modif ications date2017/05/11 07:04:00 URL:https://svn.oss.deltares.nl/repos/xbeach/trunk/src/xbeachlibrary ********************************************************** Simulation started: YYYYMMDD hh:mm:ss time zone (UTC) 20230907 14:24:36 -0800 General Input Module Reading input parameters: -------------------------------- Physical processes: XBeach reading fromparams.txt cyclic =0 (no record found, default value used) swave =0 single_dir =0 (no record found, default value used) lwave =1 (no record found, default value used) flow =1 (no record found, default value used) sedtrans =1 morphology =1 avalanching =1 nonh =1 gwflow =0 (no record found, default value used) swrunup =0 ships =0 (no record found, default value used) vegetation =0 (no record found, default value used) setbathy =0 (no record found, default value used) viscosity =1 (no record found, default value used) advection =1 (no record found, default value used) wind =1 (no record found, default value used) ht_bed_updating =1 calm_condition =0 ht_calibration =0 bed_adjustment =0 sediment_removal =1 start_node =17 end_node =365 (no record found, default value used) -------------------------------- Grid parameters: gridform =xbeach (no record found, default value used) xori =.0000 yori =.0000 alfa =270.0000 nx =3798 ny =0 posdwn =-1.0000 depfile =bed.dep vardx =1 dx =-1.0000 (no record found, default value used) dy =-1.0000 (no record found, default value used) xfile =x.grd yfile =y.grd nz =1 (no record found, default value used) -------------------------------- Model time parameters: CFL =.9000 dtset =.0000 (no record found, default value used) tstop =129600.0000 maxdtfac =500.0000 (no record found, default value used) -------------------------------- Physical constants: rho =1025.0000 (no record found, default value used) g =9.8100 (no record found, default value used) depthscale =1.0000 (no record found, default value used) -------------------------------- Initial conditions: zsinitfile = None specified -------------------------------- Wave boundary condition parameters: instat =jons_table bcfile =jonswap.txt taper =100.0000 nmax =.8000 lateralwave =neumann (no record found, default value used) -------------------------------- Wave-spectrum boundary condition parameters: nonhspectrum =1 (no record found, default value used) random =1 (no record found, default value used) fcutoff =.0000 (no record found, default value used) trepfac =.0100 (no record found, default value used) sprdthr =.0000 (no record found, default value used) Tm01switch =0 (no record found, default value used) nspectrumloc =1 (no record found, default value used) -------------------------------- Flow boundary condition parameters: front =nonh_1d left =neumann (no record found, default value used) right =neumann (no record found, default value used) back =abs_1d ARC =1 (no record found, default value used) order =2.0000 (no record found, default value used) carspan =0 (no record found, default value used) freewave =0 (no record found, default value used) epsi =-1.0000 tidetype =velocity -------------------------------- Tide boundary conditions: tideloc =2 paulrevere =land zs0file =wlev.txt -------------------------------- Discharge boundary conditions: disch_loc_file = None specified disch_timeseries_file = None specified ndischarge =0 (no record found, default value used) ntdischarge =0 (no record found, default value used) beta =.1000 (no record found, default value used) -------------------------------- Flow parameters: bedfriction =chezy (no record found, default value used) bedfriccoef =80.0000 nuh =.1000 (no record found, default value used) nuhfac =1.0000 (no record found, default value used) smag =1 -------------------------------- Coriolis force parameters: wearth =.0417 (no record found, default value used) lat =.0000 (no record found, default value used) -------------------------------- Wind parameters: rhoa =1.2500 (no record found, default value used) Cd =.0060 windfile =wind_072016.txt -------------------------------- Non-hydrostatic correction parameters: solver =tridiag kdmin =.0000 (no record found, default value used) Topt =10.0000 (no record found, default value used) nhbreaker =2 (no record found, default value used) dispc =-1.0000 (no record found, default value used) breakvisclen =1.0000 (no record found, default value used) maxbrsteep =.6000 (no record found, default value used) secbrsteep =.3000 (no record found, default value used) -------------------------------- Sediment transport parameters: form =soulsby_vanrijn waveform =vanthiel (no record found, default value used) sws =1 (no record found, default value used) lws =1 (no record found, default value used) BRfac =1.0000 (no record found, default value used) facsl =1.6000 z0 =.0060 (no record found, default value used) smax =-1.0000 (no record found, default value used) tsfac =.1000 (no record found, default value used) facua =.1000 (no record found, default value used) facSk =.1000 (no record found, default value used) facAs =.1000 (no record found, default value used) turbadv =none (no record found, default value used) turb =bore_averaged (no record found, default value used) Tbfac =1.0000 (no record found, default value used) Tsmin =.5000 (no record found, default value used) lwt =0 (no record found, default value used) betad =1.0000 (no record found, default value used) sus =1 (no record found, default value used) bed =1 (no record found, default value used) bulk =0 (no record found, default value used) facDc =1.0000 (no record found, default value used) fallvelred =0 (no record found, default value used) dilatancy =0 (no record found, default value used) reposeangle =30.0000 (no record found, default value used) bdslpeffmag =soulsby_bed bdslpeffini =bed bdslpeffdir =none (no record found, default value used) -------------------------------- Bed composition parameters: ngd =1 (no record found, default value used) nd =3 (no record found, default value used) por =.4000 (no record found, default value used) D50 =.0002 D90 =.0003 rhos =2650.0000 (no record found, default value used) dzg =.1000 (no record found, default value used) dzg1 =.1000 (no record found, default value used) dzg2 =.1000 (no record found, default value used) dzg3 =.1000 (no record found, default value used) sedcal =1.0000 (no record found, default value used) ucrcal =1.0000 (no record found, default value used) -------------------------------- Morphology parameters: morfac =1.0000 morfacopt =1 morstart =120.0000 (no record found, default value used) morstop =129600.0000 (no record found, default value used) wetslp =.1500 dryslp =1.0000 lsgrad =.0000 (no record found, default value used) hswitch =.1000 (no record found, default value used) dzmax =.0500 struct =0 thermalperiod =1800.0000 water_temperature =4.2740 melt_temperature =.0000 ice_ratio =.6000 ice_density =920.0000 latent_heat =334000000.0000 c_frozen_soil =1200000.0000 c_unfrozen_soil =2000000.0000 surface_temperature =3.3770 heat_capacity =4200000.0000 kinematic_viscosity =.0000 heat_conductivity =.5600 sea_water_density =1027.0000 roughness_height =.0100 ht_max_depth =4.0000 ht_number_of_nodes =2001.0000 time_for_ht_routine =1800.0000 ht_time_nodes =3601.0000 ht_kf =.4500 Warning: value < recommended value of2.0000 ht_ku =.8500 Warning: value < recommended value of1.0000 net_heat_coeff =3000.0000 bottom_temp =-5.5000 Warning: value > recommended value of-20.000 0 Warning: variable temp_node400 > recommended value of320 thermal_factor =1.0000 Ub_limit =2.0000 Erosion_Factor_High =1.0000 Erosion_Factor_Low =1.0000 Sedimentation_Factor_Hi =1.0000 Sedimentation_Factor_Lo =1.0000 slope_threshold =25.0000 Limit_Avalanching =.1000 (no record found, default value used) first_run_flag =1 water_cut_off =.0060 (no record found, default value used) sed_removal =.0000 -------------------------------- Output variables: timings =1 (no record found, default value used) tunits = None specified tstart =.0000 tint =1.0000 (no record found, default value used) tsglobal = None specified tintg =1800.0000 tspoints = None specified tintp =1.0000 (no record found, default value used) tsmean = None specified tintm =129600.0000 (no record found, default value used) nglobalvar =2 nglobalvar: Will generate global output for variable:zb nglobalvar: Will generate global output for variable:zs npoints =0 (no record found, default value used) nrugauge =0 (no record found, default value used) npointvar =0 (no record found, default value used) nrugdepth =1 (no record found, default value used) rugdepth =.0000 (no record found, default value used) nmeanvar =0 (no record found, default value used) outputformat =netcdf outputprecision =double (no record found, default value used) ncfilename = None specified netcdf output to:xboutput.nc -------------------------------- Output projection: projection = None specified rotate =1 (no record found, default value used) -------------------------------- Wave numerics parameters: scheme =upwind_2 (no record found, default value used) snells =1 (no record found, default value used) -------------------------------- Flow numerics parameters: eps =.0050 (no record found, default value used) eps_sd =.5000 (no record found, default value used) umin =.0000 (no record found, default value used) hmin =.2000 (no record found, default value used) secorder =1 -------------------------------- Sediment transport numerics parameters: thetanum =1.0000 (no record found, default value used) sourcesink =0 (no record found, default value used) cmax =.1000 (no record found, default value used) -------------------------------- Bed update numerics parameters: frac_dz =.7000 (no record found, default value used) nd_var =2 (no record found, default value used) split =1.0100 (no record found, default value used) merge =.0100 (no record found, default value used) -------------------------------- Finished reading input parameters -------------------------------- Unknown, unused or multiple statements of parameterTHETAMIN inparams.txt Unknown, unused or multiple statements of parameterTHETAMAX inparams.txt Unknown, unused or multiple statements of parameterDTHETA inparams.txt Unknown, unused or multiple statements of parameterEND NODE inparams.txt Unknown, unused or multiple statements of parameter%GAMMAX inparams.txt Unknown, unused or multiple statements of parameter%BETA inparams.txt Unknown, unused or multiple statements of parameter%ALPHA inparams.txt Unknown, unused or multiple statements of parameter%FACSK inparams.txt Unknown, unused or multiple statements of parameter%FACAS inparams.txt Unknown, unused or multiple statements of parameter%GAMMA inparams.txt Unknown, unused or multiple statements of parameter%GWFLOW inparams.txt Unknown, unused or multiple statements of parameter%GWNONH inparams.txt Unknown, unused or multiple statements of parameter%KX inparams.txt Unknown, unused or multiple statements of parameter%KY inparams.txt Unknown, unused or multiple statements of parameter%KZ inparams.txt Unknown, unused or multiple statements of parameterNE_LAYER inparams.txt Unknown, unused or multiple statements of parameterALIMIT inparams.txt Unknown, unused or multiple statements of parameter%CATS inparams.txt Unknown, unused or multiple statements of parameter%HWXI inparams.txt Unknown, unused or multiple statements of parameter%WCI inparams.txt Unknown, unused or multiple statements of parameter%ROLLER inparams.txt Unknown, unused or multiple statements of parameter%RFB inparams.txt Unknown, unused or multiple statements of parameter%BREAK inparams.txt Unknown, unused or multiple statements of parameterWAVEMODEL inparams.txt Unknown, unused or multiple statements of parameter%WBCFILE inparams.txt ------------------------------------ Building Grid and Bathymetry ------------------------------------ Initializing ..... readtide: reading tide time series fromwlev.txt ... readwind: reading wind time series fromwind_072016.txt ... -------------------------------- Initializing spectral wave boundary conditions -------------------------------- NetCDF outputformat Creating netcdf variable:zb Creating netcdf variable:zs Writing file definition. Setting up boundary conditions -------------------------------- Calculating spectral wave boundary conditions -------------------------------- Reading spectrum at location1 waveparams: Reading from tablejonswap.txt ... Interpreting spectrum at location1 Values calculated from interpolated spectrum: Hm0 =1.41 m Trep =4.27 s Mean dir =296.56 degN Overall Trep from all spectra calculated:4.27 s Calculating Fourier components 5.0% done 10.0% done 15.0% done 20.0% done 25.0% done 30.0% done 35.0% done 40.0% done 45.0% done 50.0% done 55.1% done 60.0% done 65.0% done 70.1% done 75.0% done 80.0% done 85.1% done 90.0% done 95.0% done 100.0% done Wave energy outside computational domain at offshore boundary:.0% Calculating short wave elevation time series 5.0% done 10.0% done 15.0% done 20.0% done 25.0% done 30.0% done 35.0% done 40.0% done 45.0% done 50.0% done 55.0% done 60.0% done 65.0% done 70.0% done 75.0% done 80.0% done 85.0% done 90.0% done 95.0% done 100.0% done Calculating short wave velocity time series 5.0% done 10.0% done 15.0% done 20.0% done 25.0% done 30.0% done 35.0% done 40.0% done 45.0% done 50.0% done 55.0% done 60.0% done 65.0% done 70.0% done 75.0% done 80.0% done 85.0% done 90.0% done 95.0% done 100.0% done Calculating primary wave interaction 3.0% done 6.1% done 9.1% done 12.3% done 15.4% done 18.6% done 21.9% done 25.2% done 28.7% done 32.3% done 36.0% done 39.7% done 43.2% done 47.0% done 50.8% done 54.7% done 58.6% done 62.4% done