The Short And Sweet Of It... +----------------------------------------------------------------------- SNCTOOLS is a set of MATLAB tools primarily for reading and writing classic model netCDF-3 and netCDF-4 files. It can use up to three backends for this: 1) tmw, the MathWorks native netCDF package 2) mexnc, the original open source mex-file 3) netcdf-java from Unidata For most cases, snctools support for various read/write configurations is summarized in the table below. | netcdf-3 | netcdf-3 | netcdf-4 | netcdf-4 | netcdf-4 | netcdf-4 | opendap | classic | classic | classic | classic | enhanced | enhanced | (SSL: 0=no, | read | write | read | write | read | write | else netcdf-java | | | | | | | version method) -------+----------+----------+----------+----------+----------+----------+---------- R2012a | tmw | tmw | tmw | tmw | tmw,java | - | java(4.2), tmw(0) R2011b | tmw | tmw | tmw | tmw | tmw,java | - | java(4.2) R2011a | tmw | tmw | tmw | tmw | tmw,java | - | java(4.2) R2010b | tmw | tmw | tmw | tmw | tmw,java | - | java(4.2) R2010a | tmw | tmw | java | - | java | - | java(4.2) R2009b | tmw | tmw | java | - | java | - | java(4.2) R2009a | tmw | tmw | java | - | java | - | java(4.2) R2008b | tmw | tmw | java | - | java | - | java(4.2) R2008a | java | mexnc | java | - | java | - | java(4.2) R2007b | java | mexnc | java | - | java | - | java(4.2) R2007a | java | mexnc | java | - | java | - | java(4.1) R2006b | java | mexnc | java | - | java | - | java(4.1) R2006a | java | mexnc | java | - | java | - | java(4.1) R14 | java | mexnc | - | - | - | - | - There are two exceptions to note. The mexnc backend is only required for write support on R14 through R2008a. If you only need to read netcdf files, the java backend will work without the mexnc backend. The second exception is on the win64 platform, as there is no mexnc backend. That means that SNCTOOLS cannot write netcdf files on win64 unless you have R2008b or higher. You can still use the java backend on win64 to read netcdf files, though. "Reading" netcdf-4 enhanced files currently means that you can read atomic datatypes (such as double and int32) on R2006a through 2011a. On R2011b, you can also read most enhanced model datatypes. If you have R2011a and have never used SNCTOOLS, you may be interested to know that R2011a has new high-level netcdf support. Please check that out before proceeding with SNCTOOLS. The exact version of the NetCDF java backend depends upon your version of MATLAB, as shown here. MATLAB Version recommended netcdf-java version =============================== =============================== R2012a: 4.2 (but not absolutely needed) R2007b through R2011b: 4.2 R2006a through R2007a: 4.1.1 R14: 2.2.20 On R2012a, MATLAB has OPeNDAP support, meaning that netcdf-java is no longer needed as the backend there. You still need it if you wish to read GRIB files, though. Please add this directory to your matlab path. You must also have mexnc on your path in order for snctools to work. SNCTOOLS is not supported at all on version R13 of MATLAB or earlier. +----------------------------------------------------------------------- SOME ISSUES TO BE AWARE OF SNCTOOLS returns all NC_CHAR attributes as MATLAB char arrays. When NetCDF-4 introduced, the SNCTOOLS idea for NC_STRING was to return them as cell arrays of char (cellstr). But the netcdf-java backend does not distinguish between NC_CHAR and NC_STRING, so there was an issue of how NC_CHAR attributes would be returned via NC_INFO/netcdf-java from an OPeNDAP URL vs the very same NC_CHAR attribute on a local file. netcdf-java returnes them as a cellstr of length 1, whereas the mex-file (whether mexnc or MATLAB's) returns them as a 1D char array. The resolution as of r3971 is to return any single-valued cellstr as a char array. Yes, this is a backwards incompatibility. +----------------------------------------------------------------------- BASIC INSTALLATION AND USAGE In order to download and install SNCTOOLS, please refer to the website, http://mexcdf.sourceforge.net/ +----------------------------------------------------------------------- SNCTOOLS PREFERENCES PRESERVE_FVD Way back in the old days, when mexnc/mexcdf was the only game in town, data was always transposed when reading/writing netCDF data thru MATLAB. The reason for this was seemingly to make the data look consistent with the way that the netcdf tools such as "ncdump" presented the metadata. "ncdump" is compiled in C, so it is therefore a row-major-order application, whereas MATLAB presents data in column-major order. Transposing large datasets can be a costly operation, however, and it really isn't necessary in all cases. SNCTOOLS can be told to not transpose data by setting the PRESERVE_FVD preference >> clear all >> setpref('SNCTOOLS','PRESERVE_FVD',true); By default this preference is false. If you set it to true, you may see a big performance boost for large datasets, but you might also end up breaking existing code that expected the data to be permuted to row-major order, so you need to be careful when using this. For efficiency purposes, rather than physically retrieve the preference every time it is needed, the preference is stored internally as a persistent variable. In order to change this preference, you therefore must invoke CLEAR ALL first. +----------------------------------------------------------------------- BUG Reports You Should Know About 1) Experimental GRIB2 Support If you have the netcdf-java jar file on your matlab javaclasspath, you can try read GRIB2 files as if they were netcdf files. This is a bit experimental, though. And if your version of MATLAB is R2008a or below, you should take a look at Technical Solution 1-2Z4RS7 on the Mathworks web site, http://www.mathworks.com. This describes a workaround for dealing with a conflict with the ucarunits.jar file that used to ship with MATLAB until R2008b. As of March 25, 2010, the URL for this technical solution was at http://www.mathworks.com/support/solutions/en/data/1-2Z4RS7/?solution=1-2Z4RS7 2) Segfaults on certain strided read operations. Affects versions R2008a and R2009a. Please consult this URL. http://www.mathworks.com/support/bugreports/522794 3) Empty Attributes MATLAB versions R2008b thru R2009b incorrectly disallowed the creation of empty attributes, which are quite clearly legal. The bug is fixed in 2010a, but fixes for 2008b thru 2009b are available. Please consult this URL http://www.mathworks.com/support/bugreports/609383 4) Out-of-memory error with negative indices. Affects R2008b through R2010a, but this only affects those who would use mexnc or the native netcdf package directly, not snctools users. Please consult this URL. http://www.mathworks.com/support/bugreports/618322 5) HDF4 SD files are tentatively supported in read-only mode on R2006a and more recent. +----------------------------------------------------------------------- Of all the routines in this m-file collection, the most useful (in my humble opinion) are as follows 1. nc_varget - reads a netcdf variable 2. nc_varput - writes to a netcdf variable 3. nc_attget - reads a netcdf attribute 4. nc_attput - writes a netcdf attribute 6. nc_dump - prints netcdf metadata