[SedimentFileInformation]
   FileCreatedBy    = Delft3D FLOW-GUI, Version: 3.41.06.10981         
   FileCreationDate = Fri Nov 12 2010, 11:40:36         
   FileVersion      = 02.00                        
[SedimentOverall]
   Cref             =  1.6000000e+003      [kg/m3]  CSoil Reference density for hindered settling calculations
   IopSus           = 0                             If Iopsus = 1: susp. sediment size depends on local flow and wave conditions
[Sediment]
   Name             = #Sediment 1#                  Name of sediment fraction
   SedTyp           = mud                           Must be "sand", "mud" or "bedload"
   RhoSol           =  2650                [kg/m3]  Specific density
   SalMax           =  0.0                 [ppt]    Salinity for saline settling velocity
   WS0              =  2.5e-4              [m/s]    Settling velocity fresh water
   WSM              =  2.5e-4              [m/s]    Settling velocity saline water
   TcrSed           =  1000                [N/m2]   Critical bed shear stress for sedimentation (uniform value or filename)
   TcrEro           =  0.5                 [N/m2]   Critical bed shear stress for erosion       (uniform value or filename)
   EroPar           =  1.0e-4              [kg/m2/s] Erosion parameter                           (uniform value or filename)
   CDryB            =  1600                [kg/m3]  Dry bed density
   IniSedThick      =  0.5                 [m]      Initial sediment layer thickness at bed (uniform value or filename)
   FacDSS           =  1.0                 [-]      FacDss * SedDia = Initial suspended sediment diameter. Range [0.6 - 1.0]
[Sediment]
   Name             = #Sediment 2#                  Name of sediment fraction
   SedTyp           = mud                           Must be "sand", "mud" or "bedload"
   RhoSol           =  2650                [kg/m3]  Specific density
   SalMax           =  0.0                 [ppt]    Salinity for saline settling velocity
   WS0              =  2.5e-4              [m/s]    Settling velocity fresh water
   WSM              =  2.5e-4              [m/s]    Settling velocity saline water
   TcrSed           =  1000                [N/m2]   Critical bed shear stress for sedimentation (uniform value or filename)
   TcrEro           =  0.5                 [N/m2]   Critical bed shear stress for erosion       (uniform value or filename)
   EroPar           =  1.0e-4              [kg/m2/s] Erosion parameter                           (uniform value or filename)
   CDryB            =  1600                [kg/m3]  Dry bed density
   IniSedThick      =  0.5                 [m]      Initial sediment layer thickness at bed (uniform value or filename)
   FacDSS           =  1.0                 [-]      FacDss * SedDia = Initial suspended sediment diameter. Range [0.6 - 1.0]
[Sediment]
   Name             = #Sediment 3#                  Name of sediment fraction
   SedTyp           = mud                           Must be "sand", "mud" or "bedload"
   RhoSol           =  2650                [kg/m3]  Specific density
   SalMax           =  0.0                 [ppt]    Salinity for saline settling velocity
   WS0              =  2.5e-4              [m/s]    Settling velocity fresh water
   WSM              =  2.5e-4              [m/s]    Settling velocity saline water
   TcrSed           =  1000                [N/m2]   Critical bed shear stress for sedimentation (uniform value or filename)
   TcrEro           =  0.5                 [N/m2]   Critical bed shear stress for erosion       (uniform value or filename)
   EroPar           =  1.0e-4              [kg/m2/s] Erosion parameter                           (uniform value or filename)
   CDryB            =  1600                [kg/m3]  Dry bed density
   IniSedThick      =  0.5                 [m]      Initial sediment layer thickness at bed (uniform value or filename)
   FacDSS           =  1.0                 [-]      FacDss * SedDia = Initial suspended sediment diameter. Range [0.6 - 1.0]
[Sediment]
   Name             = #Sediment 4#                  Name of sediment fraction
   SedTyp           = mud                           Must be "sand", "mud" or "bedload"
   RhoSol           =  2650                [kg/m3]  Specific density
   SalMax           =  0.0                 [ppt]    Salinity for saline settling velocity
   WS0              =  2.5e-4              [m/s]    Settling velocity fresh water
   WSM              =  2.5e-4              [m/s]    Settling velocity saline water
   TcrSed           =  1000                [N/m2]   Critical bed shear stress for sedimentation (uniform value or filename)
   TcrEro           =  0.5                 [N/m2]   Critical bed shear stress for erosion       (uniform value or filename)
   EroPar           =  1.0e-4              [kg/m2/s] Erosion parameter                           (uniform value or filename)
   CDryB            =  1600                [kg/m3]  Dry bed density
   IniSedThick      =  0.5                 [m]      Initial sediment layer thickness at bed (uniform value or filename)
   FacDSS           =  1.0                 [-]      FacDss * SedDia = Initial suspended sediment diameter. Range [0.6 - 1.0]