* Deltares, D-Flow FM Version 1.2.0.55920M, May 31 2018, 20:05:27 * Source: https://svn.oss.deltares.nl/repos/delft3d/branches/research/Deltares/dflowfm_development/ * File creation date: 10:33:29, 08-06-2018 ** INFO : Opened file : ISOCOLOUR.hls ** INFO : Using Local FileISOCOLOUR.hls ** INFO : Closed file : ISOCOLOUR.hls ** INFO : Opened file : ISOCOLOUR.hls ** INFO : Using Local FileISOCOLOUR.hls ** INFO : Closed file : ISOCOLOUR.hls ** INFO : MAXIMUM NUMBER OF LINKS : 2 ** INFO : MAXIMUM NUMBER OF NODES : 0 ** INFO : RESOLUTION GRAPHICS SCREEN : 1600 990 ** INFO : RESOLUTION TEXT SCREEN : 200 66 ** INFO : NUMBER OF COLOURS AVAILABLE : 256 ** DEBUG : 0 0.1000020 NOD(KMAX) ** DEBUG : 6 0.7000140 XK (KMAX), YK (KMAX), ZK (KMAX), KC (KMAX), NMK (KMAX), RNOD(KMAX) ** DEBUG : 6 9.9999998E-03 XS(NSMAX) ** DEBUG : 6 9.9999998E-03 YS(NSMAX) ** DEBUG : 6 9.9999998E-03 ZS(NSMAX) ** DEBUG : 6 9.9999998E-03 IPSAM ** DEBUG : 7 5.0000001E-02 xlan(maxlan) ** DEBUG : 7 5.0000001E-02 ylan(maxlan) ** DEBUG : 7 5.0000001E-02 zlan(maxlan) ** DEBUG : 8 2.5000000E-02 nclan(maxlan) ** INFO : Load MDU-file (*.mdu) ** INFO : Opened file : t02.mdu ** INFO : Closed file : t02.mdu ** DEBUG : 8 0.1000020 NOD(KMAX) ** DEBUG : 14 0.7000140 XK (KMAX), YK (KMAX), ZK (KMAX), KC (KMAX), NMK (KMAX), RNOD(KMAX) ** DEBUG : 14 1.4400000E-03 xsp(maxspl, maxsplen) ** DEBUG : 14 1.4400000E-03 ysp(maxspl, maxsplen) ** DEBUG : 14 1.4400000E-03 xsp2(maxspl, maxsplen) ** DEBUG : 14 1.4400000E-03 ysp2(maxspl, maxsplen) ** DEBUG : 14 9.9999998E-03 XS(NSMAX) ** DEBUG : 14 9.9999998E-03 YS(NSMAX) ** DEBUG : 14 9.9999998E-03 ZS(NSMAX) ** DEBUG : 14 9.9999998E-03 IPSAM ** DEBUG : 15 5.9999999E-02 xlan(maxlan) ** DEBUG : 15 5.9999999E-02 ylan(maxlan) ** DEBUG : 16 5.9999999E-02 zlan(maxlan) ** DEBUG : 16 2.9999999E-02 nclan(maxlan) Until here copy of previous diagnostic file ** WARNING: TimeSplitInterval invalid, disabling time partitioning of output. Got: 0X ** WARNING: readMDUFile: [sediment] transportvelocity=0 was in file, but not used. Check possible typo. ** WARNING: readMDUFile: [sediment] numintverticaleinstein=10 was in file, but not used. Check possible typo. ** WARNING: readMDUFile: [sediment] jaceneqtr=2 was in file, but not used. Check possible typo. ** WARNING: readMDUFile: [sediment] morfac=1. was in file, but not used. Check possible typo. ** WARNING: readMDUFile: [sediment] tmorfspinup=0. was in file, but not used. Check possible typo. ** WARNING: readMDUFile: [sediment] alfabed=1. was in file, but not used. Check possible typo. ** WARNING: readMDUFile: [sediment] alfasus=1. was in file, but not used. Check possible typo. ** WARNING: readMDUFile: [sediment] crefcav=20. was in file, but not used. Check possible typo. ** DEBUG : unc_read_net_ugrid: net file 't02_net.nc' is not UGRID. No problem, will fall back to old format reader. ** DEBUG : Opened 't02_net.nc' as # 3. ** DEBUG : Closed NetCDF file 't02_net.nc. ** INFO : Opened file : t01_obs.xyn ** INFO : Closed file : t01_obs.xyn ** INFO : Opened file : t01_crs.pli ** INFO : Closed file : t01_crs.pli ** INFO : Start of the computation time loop ** INFO : Initializing flow model geometry... ** DEBUG : Opened 't02_net.nc' as # 3. ** DEBUG : 16 1.3480000E-03 netcell(numpx1) ** DEBUG : 16 1.4900001E-03 lnn(numl) ** DEBUG : 16 2.9800001E-03 lne(2,numl) ** DEBUG : Renumber flow nodes... ** DEBUG : Sumdiff: 165274 Sumdiff renum: 167174 ** DEBUG : Bandwidth: 11 Bandwidth renum: 13 ** INFO : Opened file : str.ext ** DEBUG : 16 1.4920000E-03 xe (nx) ** DEBUG : 16 1.4920000E-03 ye (nx) ** DEBUG : 16 1.4920000E-03 xyen(2, nx) ** DEBUG : 16 2.5364000E-02 kce(nx), ke(nx), kez(nx), keu(nx), kes(nx), ketm(nx), kesd(nx), keuxy(nx), ket(nx), ken(nx), ke1d2d(nx), keg(nx), ked(nx), kep(nx), kedb(nx), keklep(nx), kegs(nx), kegen(nx), itpez(nx), itpenz(nx), itpeu(nx) , itpenu(nx) , kew(nx), ftpet(nx) ** DEBUG : 16 1.4920000E-03 ketr(1,nx) ** DEBUG : 16 1.4920000E-03 kesf(1,nx) ** INFO : Opened file : up2dmulti_1.pli ** INFO : Closed file : up2dmulti_1.pli ** INFO : boundary: 'up2dmulti_1.pli' opened 1 cells. ** INFO : dischargebnd up2dmulti_1.pli 1 nr of open bndcells ** INFO : Opened file : up2dmulti_2.pli ** INFO : Closed file : up2dmulti_2.pli ** INFO : boundary: 'up2dmulti_2.pli' opened 1 cells. ** INFO : dischargebnd up2dmulti_2.pli 1 nr of open bndcells ** INFO : Opened file : up2dmulti_3.pli ** INFO : Closed file : up2dmulti_3.pli ** INFO : boundary: 'up2dmulti_3.pli' opened 1 cells. ** INFO : dischargebnd up2dmulti_3.pli 1 nr of open bndcells ** INFO : Opened file : up2dmulti_4.pli ** INFO : Closed file : up2dmulti_4.pli ** INFO : boundary: 'up2dmulti_4.pli' opened 1 cells. ** INFO : dischargebnd up2dmulti_4.pli 1 nr of open bndcells ** INFO : Opened file : up2dmulti_5.pli ** INFO : Closed file : up2dmulti_5.pli ** INFO : boundary: 'up2dmulti_5.pli' opened 1 cells. ** INFO : dischargebnd up2dmulti_5.pli 1 nr of open bndcells ** INFO : Opened file : downstream.pli ** INFO : Closed file : downstream.pli ** INFO : boundary: 'downstream.pli' opened 7 cells. ** INFO : waterlevelbnd downstream.pli 7 nr of open bndcells ** INFO : Opened file : up2dsingle.pli ** INFO : Closed file : up2dsingle.pli ** INFO : boundary: 'up2dsingle.pli' opened 1 cells. ** INFO : dischargebnd up2dsingle.pli 1 nr of open bndcells ** INFO : Opened file : uponedimen.pli ** INFO : Closed file : uponedimen.pli ** INFO : boundary: 'uponedimen.pli' opened 1 cells. ** INFO : dischargebnd uponedimen.pli 1 nr of open bndcells ** DEBUG : 16 5.6559998E-03 nd(ndx), bl(ndx), bai(ndx), kcs(ndx) ** DEBUG : 17 2.1919999E-03 ln (2,lnx) ** DEBUG : 17 2.1919999E-03 lncn (2,lnx) ** DEBUG : 17 2.1919999E-03 bob (2,lnx) ** DEBUG : 17 1.0960000E-03 dx ( lnx) ** DEBUG : 17 1.0960000E-03 dxi ( lnx) ** DEBUG : 17 1.0960000E-03 wu ( lnx) ** DEBUG : 17 1.0960000E-03 wui ( lnx) ** DEBUG : 17 1.0960000E-03 kcu ( lnx) ** DEBUG : 17 1.0960000E-03 csu ( lnx) ** DEBUG : 17 1.0960000E-03 snu ( lnx) ** DEBUG : 17 1.0960000E-03 acl ( lnx) ** DEBUG : 17 1.0960000E-03 acn (2,lnx) ** DEBUG : 17 1.0960000E-03 iadv (lnx) ** DEBUG : 17 1.0960000E-03 teta (lnx) ** DEBUG : 17 1.0960000E-03 ibot (lnx) ** DEBUG : 17 3.2879999E-03 xu(lnx), yu(lnx) , blu(lnx) ** DEBUG : 17 1.4900001E-03 ln2lne (nex) ** DEBUG : 17 1.4900001E-03 lne2ln (nex) ** DEBUG : addexternalboundarypoints: added 0 bnd points for SOBEK1D-FM2D connections. ** INFO : Opened file : bathy_trench.xyz ** DEBUG : 17 1.6160000E-03 sample_coords(NTREEDIM,N) ** INFO : merged 0 samples in .01 seconds. ** INFO : Closed file : bathy_trench.xyz ** DEBUG : 16 -4.0399998E-02 idum(50*Ns) ** DEBUG : 17 1.4574000E-02 INDX(3,NSM) ** DEBUG : 17 9.7160004E-03 edgeindx(2,NSM) ** DEBUG : 17 1.4574000E-02 triedge(3,NSM) ** DEBUG : 17 2.7999999E-03 xx(numtri), yy(numtri) ** DEBUG : 17 1.4000000E-03 imask(numtri) ** DEBUG : 17 4.4140001E-03 LNtri(2,numedge) ** DEBUG : 17 2.7999999E-03 sample_coords(NTREEDIM,N) ** INFO : setbedlevelfromextfile: Setting bedlevel from file 'bathy_trench.xyz'. ** INFO : setbedlevelfromextfile: Mirroring input bedlevels at open boundaries. ** DEBUG : 17 1.0960000E-03 wcx1(lnx) ** DEBUG : 17 1.0960000E-03 wcy1(lnx) ** DEBUG : 17 1.0960000E-03 wcx2(lnx) ** DEBUG : 17 1.0960000E-03 wcy2(lnx) ** DEBUG : 17 1.4139999E-03 wcxy (2,ndx) ** DEBUG : 17 2.1919999E-03 wcL (2,Lnx) ** DEBUG : 17 1.0960000E-03 wcnx3(lnx) ** DEBUG : 17 1.0960000E-03 wcny3(lnx) ** DEBUG : 17 1.0960000E-03 wcnx4(lnx) ** DEBUG : 17 1.0960000E-03 wcny4(lnx) ** DEBUG : 17 2.6970000E-03 wcnxy(3,numk) ** DEBUG : 17 6.7320000E-03 walls(17,nw) ** DEBUG : 17 2.3759999E-03 banf(mxban) ** DEBUG : 17 2.3759999E-03 nban(4,mxban) ** DEBUG : 17 2.3759999E-03 rr(mxban), nr(mxban) ** DEBUG : 17 2.3759999E-03 banh (mxban) ** DEBUG : 17 2.3759999E-03 nbanh(4,mxban) ** INFO : Done initializing flow model geometry. ** DEBUG : 17 1.4139999E-03 s0 (ndx) , s1 (ndx) ** DEBUG : 17 1.4139999E-03 a0 (ndx) , a1 (ndx) ** DEBUG : 17 1.4139999E-03 hs (ndx) , s00 (ndx) ** DEBUG : 17 1.0960000E-03 Lbot (Lnx) ** DEBUG : 17 1.0960000E-03 Ltop (Lnx) ** DEBUG : 17 1.0960000E-03 kmxL (Lnx) ** DEBUG : 17 1.0960000E-03 ustb (lnx) ** DEBUG : 17 1.0960000E-03 ustw (lnx) ** DEBUG : 17 1.4139999E-03 ucx (ndkx) , ucy (ndkx) ** DEBUG : 17 1.0960000E-03 work0 (0:max(kmx,1),max(ndx,lnx)) ** DEBUG : 17 1.0960000E-03 work1 (max(kmx,1),max(ndx,lnx)) ** DEBUG : 17 1.4139999E-03 uqcx(ndkx) , uqcy(ndkx) ** DEBUG : 17 1.4139999E-03 ucxq(ndkx) , ucyq(ndkx) ** DEBUG : 17 1.4139999E-03 qin (ndkx) , vih (ndkx) ** DEBUG : 17 1.4139999E-03 dvxc(ndkx) , dvyc(ndkx) ** DEBUG : 17 1.0960000E-03 voldhu(ndx) ** DEBUG : 18 1.0960000E-03 z0ucur(lnx) ** DEBUG : 18 1.0960000E-03 z0urou(lnx) ** DEBUG : 18 1.0960000E-03 cfuhi(lnx) ** DEBUG : 18 1.0960000E-03 wdsu (lnx) ** DEBUG : 18 1.0960000E-03 u0 (lnkx) ** DEBUG : 18 1.0960000E-03 u1 (lnkx) ** DEBUG : 18 1.0960000E-03 u_to_umain (lnkx) ** DEBUG : 18 1.0960000E-03 q1 (lnkx) ** DEBUG : 18 1.0960000E-03 qa (lnkx) ** DEBUG : 18 1.0960000E-03 v (lnkx) ** DEBUG : 18 1.0960000E-03 ucxu (lnkx) ** DEBUG : 18 1.0960000E-03 ucyu (lnkx) ** DEBUG : 18 1.0960000E-03 hu (lnkx) ** DEBUG : 18 1.0960000E-03 huvli(lnkx) ** DEBUG : 18 1.0960000E-03 au (lnkx) ** DEBUG : 18 1.0960000E-03 viu (lnkx) ** DEBUG : 18 1.0960000E-03 vicLu (lnkx) ** DEBUG : 18 1.0960000E-03 cflj (lnkx) ** DEBUG : 18 1.0960000E-03 tetaj(lnkx) ** DEBUG : 18 1.0960000E-03 suu (lnkx) ** DEBUG : 18 1.0960000E-03 advi (lnkx) ** DEBUG : 18 1.0960000E-03 adve (lnkx) ** DEBUG : 18 1.0960000E-03 rhou (lnkx) ** DEBUG : 18 1.0960000E-03 plotlin(max(lnkx,ndkx)) ** DEBUG : 18 1.0960000E-03 ypar(lnx) ** DEBUG : 18 1.0960000E-03 cfwavhi(lnx) ** DEBUG : 18 1.0960000E-03 cfhi_vanrijn(lnx) ** DEBUG : 18 1.0960000E-03 taubxu(lnx) ** DEBUG : 18 1.0960000E-03 ustokes(lnkx) ** DEBUG : 18 1.0960000E-03 vstokes(lnkx) ** DEBUG : 18 1.0960000E-03 wblt(lnx) Sediment fraction 1: Sediment_sand ** WARNING: No Nodal Point Relations Specified, Set to (Default) Proportional. ** WARNING: Exponent of Discharge Ratio Set to Default: k = 1 ** WARNING: Exponent of Width Ratio Set to Default : m = 0 *** Start of underlayer input Underlayer mechanism : 2 Exchange layer : NO Porosity : Based on CDRYB Number of Lagrangian layers : 0 Number of Eulerian layers : 0 Base layer composition : computed separately Mixing between layers : NO Thickness transport layer : 0.5000E+00 Boundary name : up2dmulti_1 Composition condition prescribed : free Boundary name : up2dmulti_2 Composition condition prescribed : free Boundary name : up2dmulti_3 Composition condition prescribed : free Boundary name : up2dmulti_4 Composition condition prescribed : free Boundary name : up2dmulti_5 Composition condition prescribed : free Boundary name : downstream Composition condition prescribed : free Boundary name : up2dsingle Composition condition prescribed : free Boundary name : uponedimen Composition condition prescribed : free Initial bed composition : from sediment file *** End of underlayer input Determining transport formulation(s) *** Start of sediment input Ref concentration : 0.1600E+04 Option Dss : 1 Uniform mud content : 0.0000E+00 Sediment number : 1 Name : Sediment_sand Type : bedload RHOSOL : 0.2650E+04 sed. distribution : piecewise loguniform SedD10 : 0.3750E-03 SedD50 : 0.5000E-03 SedDM : 0.5355E-03 SedD90 : 0.7500E-03 CDRYB : 0.1600E+04 Uniform IniThick : 0.5000E+01 [m] Formula name : Engelund-Hansen (1967) Transport formula used : 1 ACal : 0.6000E+00 RouKs : 0.8000E-01 SusFac : 0.0000E+00 *** End of sediment input *** Start of morphological input Morphological Timescale Factor : 0.1000E+01 Morphological Changes Start Time (Tunit=M) : 0.1000E+02 Fixed Layer Erosion Threshold : 0.1000E+01 Bed level updating : ACTIVE Composition updating : ACTIVE Entrainment/deposition flux in mass bal. : NEGLECTED Sand Equili. conc. profs. at boundaries : NOT USED Mud Equili. conc. profs. at boundaries : NOT USED Sediment included in fluid density calc. : NO AKSFAC : 0.1000E+01 RWAVE : 0.2000E+01 Equilibrium sed. conc. profiles :calculated (D3D mix) Suspended sed. multiplication factor : 0.1000E+01 Bed load transp. multiplication factor : 0.1000E+01 wave-rel. susp.sed.transp.fact.(SUSW) : 0.1000E+01 wave-rel. bed-ld.sed.transp.fact.(BEDW) : 0.1000E+01 Min.depth for sed. calculations(SEDTHR) : 0.1000E+00 Glob./max. dry cell erosion fact(THETSD) : 0.1000E+01 Max depth for variable THETSD (HMAXTH) : 0.1000E+01 Computing THETSD for dry bank erosion Tuning param. Shields Taucr (FACTCR) : 0.1000E+01 GLM velocities i.s.o Eulerian velocities for bed load transport and reference conc: NO EPSPAR: Always use Van Rijns param. mix. dist. : NO Standard option: Rc from Flow, Rw=RWAVE*0.025 : 1 Update bed level at inflow boundaries : YES Merge bottoms from parallel runs : NO Source/sink limiter DZMAX(depth frac.) : 0.5000E-01 Max. volumetric ref. conc. CAMAX : 0.6500E+00 Hiding & exposure formulation : None Bed slope effect formulation : None Requested percentile(s) : 10.0000 : 15.0000 : 50.0000 : 90.0000 Output transport rates : mass Boundary name : up2dmulti_1 Transport incl pores prescribed : time series Variation along boundary : uniform Boundary name : up2dmulti_2 Transport incl pores prescribed : time series Variation along boundary : uniform Boundary name : up2dmulti_3 Transport incl pores prescribed : time series Variation along boundary : uniform Boundary name : up2dmulti_4 Transport incl pores prescribed : time series Variation along boundary : uniform Boundary name : up2dmulti_5 Transport incl pores prescribed : time series Variation along boundary : uniform Boundary name : downstream Depth prescribed : free Boundary name : up2dsingle Transport incl pores prescribed : time series Variation along boundary : uniform Boundary name : uponedimen Transport incl pores prescribed : time series Variation along boundary : uniform *** End of morphological input ** INFO : Finding crossed flowlinks... ** INFO : done ** INFO : Finding flow nodes... ** INFO : done in 0.00000 sec. ** INFO : Start initializing external forcings... ** INFO : External Forcing or Initialising 'dischargebnd' from file 'up2dmulti_1.pli'. ** INFO : External Forcing or Initialising 'dischargebnd' from file 'up2dmulti_2.pli'. ** INFO : External Forcing or Initialising 'dischargebnd' from file 'up2dmulti_3.pli'. ** INFO : External Forcing or Initialising 'dischargebnd' from file 'up2dmulti_4.pli'. ** INFO : External Forcing or Initialising 'dischargebnd' from file 'up2dmulti_5.pli'. ** INFO : External Forcing or Initialising 'waterlevelbnd' from file 'downstream.pli'. ** INFO : External Forcing or Initialising 'dischargebnd' from file 'up2dsingle.pli'. ** INFO : External Forcing or Initialising 'dischargebnd' from file 'uponedimen.pli'. ** INFO : Closed file : str.ext ** INFO : Done initializing external forcings. ** DEBUG : 18 1.0960000E-03 klnup(6,lnx) ** DEBUG : 18 1.0960000E-03 slnup(6,lnx) ** DEBUG : 18 1.0960000E-03 lv2(lintot) ** DEBUG : 18 2.3600000E-03 ccr(0:ijstck) ** DEBUG : 18 2.3600000E-03 bbl(0:ijstck) ** DEBUG : 18 1.4139999E-03 bbr(nodtot), ddr(nodtot) ** DEBUG : 18 3.5349999E-03 d0(nodtot), zkr(nodtot),pk(0:nodtot), apk(nodtot), rk(nodtot) ** INFO : nogauss , nocg : 699 8 ** INFO : Finding crossed flowlinks... ** INFO : done ** INFO : Finding flow nodes... ** INFO : done in 0.01500 sec. ** INFO : Modelinit finished at: 10:33:37, 08-06-2018 ** INFO : ** Model initialization was successful ** ** INFO : * Active Model definition: # Generated on 10:33:37, 08-06-2018 # Deltares, D-Flow FM Version 1.2.0.55920M, May 31 2018, 20:05:27 # Source:https://svn.oss.deltares.nl/repos/delft3d/branches/research/Deltares/dflowfm_development/ [model] Program = D-Flow FM Version = 1.2.0.55920M MDUFormatVersion = 1.06 # File format version (do not edit this) AutoStart = 0 # Autostart simulation after loading MDU (0: no, 1: autostart, 2: autostartstop) ModelSpecific = # Optional 'model specific ID', to enable certain custom runtime function calls (instead of via MDU name). [geometry] NetFile = t02_net.nc # Unstructured grid file *_net.nc GridEnclosureFile = # Enclosure file to clip outer parts from the grid *.pol BedlevelFile = bathy_trench.xyz # Bedlevels points file e.g. *.xyz, only needed for bedlevtype not equal 3 DryPointsFile = # Dry points file *.xyz (third column dummy z values), or dry areas polygon file *.pol (third column 1/-1: inside/outside) WaterLevIniFile = # Initial water levels sample file *.xyz LandBoundaryFile = # Land boundaries file *.ldb, used for visualization ThinDamFile = # Polyline file *_thd.pli, containing thin dams FixedWeirFile = # Polyline file *_fxw.pliz, containing fixed weirs with rows x, y, crest level, left ground level, right ground level PillarFile = # Polyline file *_pillar.pliz, containing four colums with x, y, diameter and Cd coefficient Gulliesfile = # Polyline file *_gul.pliz, containing lowest bed level along talweg x, y, z level Roofsfile = # Polyline file *_rof.pliz, containing roofgutter heights x, y, z level VertplizFile = # Vertical layering file *_vlay.pliz with rows x, y, Z, first Z, nr of layers, second Z, layer type ProflocFile = # Channel profile location file *_proflocation.xyz with rows x, y, z, profile number ref ProfdefFile = # Channel profile definition file *_profdefinition.def with definition for all profile numbers ProfdefxyzFile = # Channel profile definition file _profdefinition.def with definition for all profile numbers Uniformwidth1D = 0.1 # Uniform width for channel profiles not specified by profloc Uniformheight1D = 3. # Uniform height for channel profiles not specified by profloc StructureFile = # File *.ini containing list of structures (pumps, weirs, gates and general structures) ManholeFile = # File *.ini containing manholes PipeFile = # File *.pliz containing pipe-based 'culverts' ShipdefFile = # File *.shd containing ship definitions WaterLevIni = 0. # Initial water level at missing s0 values BedlevUni = -5. # Uniform bed level used at missing z values if BedlevType > 2 BedlevType = 1 # Bathymetry specification # 1: at cell centers (from BathymetryFile) # 2: at faces (from BathymetryFile) # 3: at nodes, face levels mean of node values # 4: at nodes, face levels min. of node values # 5: at nodes, face levels max. of node values # 6: at nodes, face levels max. of cell-center values Blmeanbelow = -999. # If not -999d0, below this level the cell center bed level is the mean of surrouding net nodes Blminabove = -999. # If not -999d0, above this level the cell center bed level is the min. of surrouding net nodes Groundlayerthickness = -999. # Only in pipes: groundlayer thickness (m) PartitionFile = # Domain partition polygon file *_part.pol for parallel run AngLat = 0. # Angle of latitude S-N (deg), 0: no Coriolis AngLon = 0. # Angle of longitude E-W (deg), 0: Greenwich, used in solar heat flux computation. Conveyance2D = -1 # -1: R=HU,0: R=H, 1: R=A/P, 2: K=analytic-1D conv, 3: K=analytic-2D conv Slotw2D = 0. # - Sillheightmin = 0.5 # Weir treatment only if both sills larger than this value (m) Makeorthocenters = 0 # Switch from circumcentres to orthocentres in geominit (i>=1: number of iterations, 0: do not use) Dcenterinside = 1. # Limit cell center (1.0: in cell, 0.0: on c/g) Bamin = 1.d-6 # Minimum grid cell area, in combination with cut cells OpenBoundaryTolerance = 3. # Search tolerance factor between boundary polyline and grid cells, in cell size units RenumberFlowNodes = 1 # Renumber the flow nodes (1: yes, 0: no) Kmx = 0 # Maximum number of vertical layers Layertype = 1 # Vertical layer type (1: all sigma, 2: all z, 3: use VertplizFile) Numtopsig = 0 # Number of sigma layers in top of z-layer model SigmaGrowthFactor = 1. # Layer thickness growth factor from bed up StretchType = -1 # Type of layer stretching, 0 = uniform, 1 = user defined, 2 = fixed level double exponential [numerics] CFLMax = 0.7 # Maximum Courant number Lincontin = 0 # Default 0; Set to 1 for linearizing d(Hu)/dx; link to AdvecType AdvecType = 3 # Advection type (0: none, 1: Wenneker, 2: Wenneker q(uio-u), 3: Perot q(uio-u), 4: Perot q(ui-u), 5: Perot q(ui-u) without itself) TimeStepType = 2 # Time step handling (0: only transport, 1: transport + velocity update, 2: full implicit step-reduce, 3: step-Jacobi, 4: explicit) Icoriolistype = 5 # 0=No, 1=yes, if jsferic then spatially varying, if icoriolistype==6 then constant (anglat) Limtyphu = 0 # Limiter type for waterdepth in continuity eqn. (0: none, 1: minmod, 2: van Leer, 3: Kooren, 4: monotone central) Limtypmom = 4 # Limiter type for cell center advection velocity (0: none, 1: minmod, 2: van Leer, 3: Kooren, 4: monotone central) Limtypsa = 0 # Limiter type for salinity transport (0: none, 1: minmod, 2: van Leer, 3: Kooren, 4: monotone central) TransportMethod = 1 # Transport method (0: Herman's method, 1: transport module) TransportTimestepping = 0 # Timestepping method in Transport module, 0 = global, 1 = local (default) Vertadvtypsal = 6 # Vertical advection type for salinity (0: none, 1: upwind explicit, 2: central explicit, 3: upwind implicit, 4: central implicit, 5: central implicit but upwind for neg. stratif., 6: higher order explicit, no Forester) Vertadvtyptem = 6 # Vertical advection type for temperature (0: none, 1: upwind explicit, 2: central explicit, 3: upwind implicit, 4: central implicit, 5: central implicit but upwind for neg. stratif., 6: higher order explicit, no Forester) Cffacver = 0. # Factor for including (1-CFL) in HO term vertical (0d0: no, 1d0: yes) Jarhoxu = 0 # Inlcude density gradient in advection term (0: no, 1: yes, 2: Also in barotrop and baroclin pressure term) Horadvtypzlayer = 0 # Horizontal advection treatment of z-layers (1: default, 2: sigma-like) Zlayeratubybob = 0 # Lowest connected cells governed by bob instead of by bL L/R Icgsolver = 4 # Solver type (1: sobekGS_OMP, 2: sobekGS_OMPthreadsafe, 3: sobekGS, 4: sobekGS + Saadilud, 5: parallel/global Saad, 6: parallel/Petsc, 7: parallel/GS) Maxdegree = 6 # Maximum degree in Gauss elimination Noderivedtypes = 5 # 0=use der. types. , 1 = less, 2 = lesser, 5 = also dealloc der. types FixedWeirScheme = 0 # Fixed weir scheme (0: none, 1: compact stencil, 2: whole tile lifted, full subgrid weir + factor) FixedWeirContraction = 1. # Fixed weir flow width contraction factor Fixedweirfrictscheme = 0 # Fixed weir friction scheme (0: friction based on hu, 1: friction based on subgrid weir friction scheme) Fixedweirtopwidth = 3. # Uniform width of the groyne part of fixed weirs Fixedweirtopfrictcoef = -999. # Uniform friction coefficient of the groyne part of fixed weirs Fixedweirtalud = 4. # Uniform talud slope of fixed weirs Izbndpos = 0 # Position of z boundary (0: D3Dflow, 1: on net boundary, 2: on specified polyline) Tlfsmo = 0. # Fourier smoothing time (s) on water level boundaries Logprofatubndin = 1 # ubnds inflow: 0=uniform U1, 1 = log U1, 2 = user3D Logprofkepsbndin = 0 # inflow: 0=0 keps, 1 = log keps, 2 = user3D Slopedrop2D = 0. # Apply drop losses only if local bed slope > Slopedrop2D, (<=0: no drop losses) Drop3D = -999. # Apply droplosses in 3D if z upwind below bob + 2/3 hu*drop3D Chkadvd = 0.1 # Check advection terms if depth < chkadvdp, => less setbacks Trsh_u1Lb = 0. # 2D bedfriction in 3D below this threshold (m) Epshstem = 1.d-3 # Only compute heatflx + evap if depth > epshstem Zwsbtol = 0. # tolerance for zws(kb-1) at bed Keepzlayeringatbed = 1 # bedlayerthickness = zlayerthickness at bed 0 or 1 Teta0 = 0.55 # Theta of time integration (0.5 < theta < 1) Qhrelax = 1.d-2 # Relaxation on Q-h open boundaries Jbasqbnddownwindhs = 0 # Water depth scheme at discharge boundaries (0: original hu, 1: downwind hs) cstbnd = 0 # Delft-3D type velocity treatment near boundaries for small coastal models (1: yes, 0: no) Maxitverticalforestersal = 0 # Forester iterations for salinity (0: no vertical filter for salinity, > 0: max nr of iterations) Maxitverticalforestertem = 0 # Forester iterations for temperature (0: no vertical filter for temperature, > 0: max nr of iterations) Turbulencemodel = 3 # Turbulence model (0: none, 1: constant, 2: algebraic, 3: k-epsilon, 4: k-tau) Turbulenceadvection = 3 # Turbulence advection (0: none, 3: horizontally explicit and vertically implicit) Eddyviscositybedfacmax = 0. # Limit eddy viscosity at bed ) AntiCreep = 0 # Include anti-creep calculation (0: no, 1: yes) Barocterm = 2 # (original = 1, current = 2 ) Maxwaterleveldiff = 0. # upper bound (in m) on water level changes (<= 0: no bounds). Run will abort when violated. Maxvelocitydiff = 0. # upper bound (in m/s) on velocity changes (<= 0: no bounds). Run will abort when violated. MinTimestepBreak = 0. # smallest allowed timestep (in s), checked on a sliding average of several timesteps. Run will abort when violated. Epshu = 1.d-4 # Threshold water depth for wet and dry cells SobekDFM_umin = 0. # Minimal velocity treshold for weir losses in Sobek-DFM coupling. SobekDFM_umin_method = 0 # Method for minimal velocity treshold for weir losses in Sobek-DFM coupling. SobekDFM_Minimal_1d2d_Embankment = 1.d-2 # Minimal crest height of 1D2D SOBEK-DFM embankments. sobekDFM_relax = 0.1 # Relaxation factor for SOBEK-DFM coupling algorithm. Vertadvtypmom = 3 # vertical advection for u1: 0: No, 3: Upwind implicit, 4: Central implicit, 5: QUICKEST implicit., 6: centerbased upwind expl jaupwindsrc = 1 # 1st-order upwind advection at sources/sinks (1) or higher-order (0) jasfer3D = 0 # corrections for spherical coordinates vicouv_filter = 0. # artificial viscosity for filtering (m2/s) LocSaltLev = 1. # salinity level for case of lock exchange LocSaltMin = 5. # minimum salinity for case of lock exchange LocSaltMax = 10. # maximum salinity for case of lock exchange Numlimdt_baorg = 0 # if previous numlimdt > Numlimdt_baorg keep original cell area ba in cutcell [physics] UnifFrictCoef = 60. # Uniform friction coefficient (0: no friction) UnifFrictType = 0 # Uniform friction type (0: Chezy, 1: Manning, 2: White-Colebrook, 3: idem, WAQUA style) UnifFrictCoef1D = 60. # Uniform friction coefficient in 1D links (0: no friction) UnifFrictCoef1D2D = 2.3d-2 # Uniform friction coefficient in 1D links (0: no friction) UnifFrictCoefLin = 0. # Uniform linear friction coefficient for ocean models (m/s) (0: no friction) UnifFrictCoefGrLay = 0.100000001490116 # Uniform ground layer friction coefficient for ocean models (m/s) (0: no friction) Umodlin = 1. # Linear friction umod, for ifrctyp=4,5,6 Vicouv = 1.d-6 # Uniform horizontal eddy viscosity (m2/s) Dicouv = 1. # Uniform horizontal eddy diffusivity (m2/s) Vicoww = 5.d-5 # Uniform vertical eddy viscosity (m2/s) Dicoww = 5.d-5 # Uniform vertical eddy diffusivity (m2/s) Vicwminb = 0. # Minimum visc in prod and buoyancy term (m2/s) Xlozmidov = 0. # Ozmidov length scale (m), default=0.0, no contribution of internal waves to vertical diffusion Smagorinsky = 0. # Smagorinsky factor in horizontal turbulence, e.g. 0.15 Elder = 0. # Elder factor in horizontal turbulence irov = 0 # 0=free slip, 1 = partial slip using wall_ks wall_ks = 0. # Wall roughness type (0: free slip, 1: partial slip using wall_ks) Rhomean = 1000. # Average water density (kg/m3) Idensform = 0 # Density calulation (0: uniform, 1: Eckard, 2: Unesco, 3: baroclinic case) Ag = 9.81 # Gravitational acceleration TidalForcing = 0 # Tidal forcing, if jsferic=1 (0: no, 1: yes) SelfAttractionLoading = 0 # Self attraction and loading (0=no, 1=yes, 2=only self attraction) ITcap = 0. # Upper limit on internal tides dissipation (W/m^2) Doodsonstart = 55.565 # TRIWAQ: 55.565, D3D: 57.555 Doodsonstop = 375.575 # TRIWAQ: 375.575, D3D: 275.555 Doodsoneps = 3.d-2 # TRIWAQ = 0.0 400 cmps , D3D = 0.03 60 cmps VillemonteCD1 = 1. # Calibration coefficient for Villemonte. Default = 1.0. NB. For Bloemberg data set 0.8 is recommended. VillemonteCD2 = 10. # Calibration coefficient for Villemonte. Default = 10.0. NB. For Bloemberg data set 0.8 is recommended. Salinity = 0 # Include salinity, (0=no, 1=yes) InitialSalinity = 0. # Uniform initial salinity concentration (ppt) Sal0abovezlev = -999. # Vertical level (m) above which salinity is set 0 DeltaSalinity = -999. # for testcases Salimax = -999. # Limit the salinity Salimin = 0. # Limit the salinity Backgroundsalinity = 0. # Background salinity for eqn. of state (ppt) Backgroundwatertemperature = 20. # Background water temperature for eqn. of state (deg C) Temperature = 0 # Include temperature (0: no, 1: only transport, 3: excess model of D3D, 5: composite (ocean) model) InitialTemperature = 6. # Uniform initial water temperature (degC) Secchidepth = 1. # Water clarity parameter (m) Stanton = -1. # Coefficient for convective heat flux, if negative, Ccon = abs(Stanton)*Cdwind Dalton = -1. # Coefficient for evaporative heat flux, if negative, Ceva = abs(Dalton)*Cdwind Tempmax = -999. # Limit the temperature Tempmin = 0. # Limit the temperature Surftempsmofac = 0. # Hor . Smoothing factor for surface water in heatflx comp. (0.0-1.0), 0=no Soiltempthick = 0.1 # Use soil temperature buffer if > 0, e.g. 0.2 (m) Heat_eachstep = 1 # 1=heat each timestep, 0=heat each usertimestep SecondaryFlow = 0 # Secondary flow (0: no, 1: yes) BetaSpiral = 0. # Weight factor of the spiral flow intensity on flow dispersion stresses Equili = 0 # Equilibrium spiral flow intensity (0: no, 1: yes) [sediment] Sedimentmodelnr = 4 # Sediment model nr, (0=no, 1=Krone, 2=SvR2007, 3=E-H, 4=MorphologyModule) SedFile = str.sed # Sediment characteristics file (*.sed) MorFile = str.mor # Morphology settings file (*.mor) DredgeFile = # Dredging/dumping settings file (*.dad) TransportVelocity = 1 # Velocities for sediment transport, 0=Lagr bed+sus, 1=Eul bed + Lagr sus, 2=Eul bed+sus [veg] Vegetationmodelnr = 0 # Vegetation model nr, (0=no, 1=Baptist DFM) Clveg = 0.8 # Stem distance factor, default 0.8 () Cdveg = 0.7 # Stem Cd coefficient , default 0.7 () Cbveg = 0. # Stem stiffness coefficient , default 0.7 () Rhoveg = 0. # Stem Rho, if > 0, -> bouyant stick procedure, default 0.0 () Stemheightstd = 0. # Stem height standard deviation fraction, e.g. 0.1 () Densvegminbap = 0. # Minimum vegetation density in Baptist formula (1/m2) [wind] ICdtyp = 2 # Wind drag coefficient type (1=Const; 2=Smith&Banke (2 pts); 3=S&B (3 pts); 4=Charnock 1955, 5=Hwang 2005, 6=Wuest 2005, 7=Hersbach 2010 (2 pts) Cdbreakpoints = 2.5d-3 2.5d-3 # Wind drag coefficient break points Windspeedbreakpoints = 0. 100. # Wind speed break points (m/s) Relativewind = 0 # Wind speed relative to top-layer water speed, 1=yes, 0 = no) Rhoair = 1.2 # Air density (kg/m3) PavBnd = 0. # Average air pressure on open boundaries (N/m2) (only applied if > 0) Pavini = 0. # Average air pressure for initial water level correction (N/m2) (only applied if > 0) [grw] groundwater = 0 # 0=No (horizontal) groundwater flow, 1=With groundwater flow Infiltrationmodel = 0 # 0=No infiltration, 1=infiltration=interceptionlayer (with grw), 2=infiltration=Infiltrationcapacity, 3=model unsaturated/saturated (with grw) ( ) Hinterceptionlayer = 0. # Intercept this amount of rain (m) UnifInfiltrationCapacity = 0. # Uniform maximum infiltration capacity (m/s) Conductivity = 0. # non dimensionless K conductivity saturated (m/s), Q = K*A*i (m3/s) h_aquiferuni = 20. # bgrw = bl - h_aquiferuni (m), if negative, bgrw = bgrwuni h_unsatini = 0.200000002980232 # initial level groundwater is bedlevel - h_unsatini (m), if negative, sgrw = sgrwini [waves] Wavemodelnr = 0 # Wave model nr. (0: none, 1: fetch/depth limited hurdlestive, 2: Young-Verhagen, 3: SWAN, 4: wave group forcing, 5: uniform Wavenikuradse = 1.d-2 # Wave friction Nikuradse ks coefficient (m), used in Krone-Swart Rouwav = FR84 # Friction model for wave induced shear stress: FR84 (default) or: MS90, HT91, GM79, DS88, BK67, CJ85, OY88, VR04 Gammax = 1. # Maximum wave height/water depth ratio uorbfac = 0 # Orbital velocities: 0=D3D style; 1=Guza style jahissigwav = 1 # 1: sign wave height on his output; 0: hrms wave height on his output hminlw = 0.2 # Cut-off depth for application of wave forces in momentum balance [time] RefDate = 20151101 # Reference date (yyyymmdd) Tzone = 0. # Time zone assigned to input time series DtUser = 0.24 # Time interval (s) for external forcing update DtNodal = 21600. # Time interval (s) for updating nodal factors in astronomical boundary conditions DtMax = 0.24 # Maximal computation timestep (s) Dtfacmax = 1.1 # Max timestep increase factor ( ) DtInit = 1. # Initial computation timestep (s) Timestepanalysis = 0 # 0=no, 1=see file *.steps Autotimestepdiff = 0 # 0 = no, 1 = yes (Time limitation based on explicit diffusive term) Tunit = M # Time unit for start/stop times (D, H, M or S) TStart = 0. # Start time w.r.t. RefDate (in TUnit) TStop = 2000. # Stop time w.r.t. RefDate (in TUnit) [restart] RestartFile = # Restart netcdf-file, either *_rst.nc or *_map.nc RestartDateTime = 20151101 # Restart date and time (YYYYMMDDHHMMSS) when restarting from *_map.nc [external forcing] ExtForceFile = str.ext # Old format for external forcings file *.ext, link with tim/cmp-format boundary conditions specification ExtForceFileNew = # New format for external forcings file *.ext, link with bc-format boundary conditions specification Rainfall = 0 # Include rainfall, (0=no, 1=yes) [trachytopes] TrtRou = N # Include alluvial and vegetation roughness (trachytopes) (Y: yes, N: no) TrtDef = # File (*.ttd) including trachytope definitions TrtL = # File (*.arl) including distribution of trachytope definitions DtTrt = 1200. # Trachytope roughness update time interval (s) [calibration] UseCalibration = 0 # Activate calibration factor friction multiplier (1 = yes, 0 = no) DefinitionFile = # File (*.cld) including calibration definitions AreaFile = # File (*.cll) including area distribution of calibration definitions [output] OutputDir = dflowfmoutput # Output directory of map-, his-, rst-, dat- and timings-files, default: DFM_OUTPUT_. Set to . for current dir. FlowGeomFile = # Flow geometry NetCDF *_flowgeom.nc ObsFile = t01_obs.xyn # Points file *.xyn with observation stations with rows x, y, station name CrsFile = t01_crs.pli # Polyline file *_crs.pli defining observation cross sections FouFile = # Fourier analysis input file *.fou HisFile = # HisFile name *_his.nc MapFile = # MapFile name *_map.nc HisInterval = 60. 0. 120000. # History output times, given as "interval" "start period" "end period" (s) XLSInterval = 0. # Interval (s) between XLS history MapInterval = 900. 0. 120000. # Map file output, given as "interval" "start period" "end period" (s) RstInterval = 0. 0. 120000. # Restart file output times, given as "interval" "start period" "end period" (s) S1incinterval = 0. # Interval (m) in incremental file for water levels S1 WaqInterval = 0. 0. 120000. # DELWAQ output times, given as "interval" "start period" "end period" (s) StatsInterval = -60. # Screen step output interval in seconds simulation time, if negative in seconds wall clock time WriteBalancefile = 0 # Write balance file (1: yes, 0: no) TimingsInterval = 0. # Timings statistics output interval TimeSplitInterval = 0X # Time splitting interval, after which a new output file is started. value+unit, e.g. '1 M', valid units: Y,M,D,h,m,s. MapFormat = 4 # Map file format, 1: netCDF, 2: Tecplot, 3: netCFD and Tecplot, 4: NetCDF-UGRID Wrihis_balance = 1 # Write mass balance totals to his file (1: yes, 0: no) Wrihis_sourcesink = 1 # Write sources-sinks statistics to his file (1=yes, 0=no) Wrihis_structure_gen = 1 # Write general structure parameters to his file (1: yes, 0: no) Wrihis_structure_dam = 1 # Write dam parameters to his file (1: yes, 0: no) Wrihis_structure_pump = 1 # Write pump parameters to his file (1: yes, 0: no) Wrihis_structure_gate = 1 # Write gate parameters to his file (1: yes, 0: no) Wrihis_structure_weir = 1 # Write weir parameters to his file (1: yes, 0: no) Wrihis_turbulence = 1 # Write k, eps and vicww to his file (1: yes, 0: no) Wrihis_wind = 1 # Write wind velocities to his file (1: yes, 0: no) Wrihis_rain = 1 # Write precipitation to his file (1: yes, 0: no) Wrihis_temperature = 1 # Write temperature to his file (1: yes, 0: no) Wrihis_waves = 1 # Write wave data to his file (1: yes, 0: no) Wrihis_heat_fluxes = 0 # Write heat fluxes to his file (1: yes, 0: no) Wrihis_salinity = 1 # Write salinity to his file (1: yes, 0: no) Wrihis_density = 1 # Write density to his file (1: yes, 0: no) Wrihis_waterlevel_s1 = 1 # Write water level to his file (1: yes, 0: no) Wrihis_bedlevel = 1 # Write bed level to his file (1: yes, 0: no) Wrihis_waterdepth = 0 # Write waterd epth to his file (1: yes, 0: no) Wrihis_velocity_vector = 1 # Write velocity vectors to his file (1: yes, 0: no) Wrihis_upward_velocity_component = 0 # Write upward velocity to his file (1: yes, 0: no) Wrihis_sediment = 1 # Write sediment transport to his file (1: yes, 0: no) Wrihis_constituents = 1 # Write tracers to his file (1: yes, 0: no) Wrihis_zcor = 1 # Write vertical coordinates to his file (1: yes, 0: no) Wrimap_waterlevel_s0 = 1 # Write water levels for previous time step to map file (1: yes, 0: no) Wrimap_waterlevel_s1 = 1 # Write water levels to map file (1: yes, 0: no) Wrimap_volume1 = 0 # Write volumes to map file (1: yes, 0: no) Wrimap_velocity_component_u0 = 1 # Write velocity component for previous time step to map file (1: yes, 0: no) Wrimap_velocity_component_u1 = 1 # Write velocity component to map file (1: yes, 0: no) Wrimap_velocity_vector = 1 # Write cell-center velocity vectors to map file (1: yes, 0: no) Wrimap_upward_velocity_component = 0 # Write upward velocity component on cell interfaces (1: yes, 0: no) Wrimap_density_rho = 1 # Write flow density to map file (1: yes, 0: no) Wrimap_horizontal_viscosity_viu = 1 # Write horizontal viscosity to map file (1: yes, 0: no) Wrimap_horizontal_diffusivity_diu = 1 # Write horizontal diffusivity to map file (1: yes, 0: no) Wrimap_flow_flux_q1 = 1 # Write flow flux to map file (1: yes, 0: no) Wrimap_numlimdt = 1 # Write the number times a cell was Courant limiting to map file (1: yes, 0: no) Wrimap_taucurrent = 1 # Write the shear stress to map file (1: yes, 0: no) Wrimap_chezy = 1 # Write the chezy roughness to map file (1: yes, 0: no) Wrimap_sediment = 1 # Write sediment fractions to map file (1: yes, 0: no) Wrimap_turbulence = 1 # Write vicww, k and eps to map file (1: yes, 0: no) Wrimap_wind = 1 # Write wind velocities to map file (1: yes, 0: no) Writek_CdWind = 1 # Write wind friction coeffs to tek file (1: yes, 0: no) Writepart_domain = 1 # Write partition domain info. for postprocessing Richardsononoutput = 0 # Write Richardson numbers (1: yes, 0: no) Wrishp_crs = 0 # Write grid-snapped cross sections to shapefile (1: yes, 0: no) Wrishp_obs = 0 # Write grid-snapped observation stations to shapefile (1: yes, 0: no) Wrishp_weir = 0 # Write grid-snapped weirs to shapefile (1: yes, 0: no) Wrishp_thd = 0 # Write grid-snapped thin dams to shapefile (1: yes, 0: no) Wrishp_gate = 0 # Write grid-snapped gates to shapefile (1: yes, 0: no) Wrishp_emb = 0 # Write grid-snapped 1d2d embankments to shapefile (1: yes, 0: no) Wrishp_fxw = 0 # Write grid-snapped fixed weirs to shapefile (1: yes, 0: no) Wrishp_src = 0 # Write grid-snapped source-sinks to shapefile (1: yes, 0: no) Wrishp_pump = 0 # Write grid-snapped pumps to shapefile (1: yes, 0: no) WriteDFMinterpretedvalues = 0 # Write DFMinterpretedvalues (1: yes, 0: no) MapOutputTimeVector = # File (*.mpt) containing fixed map output times (s) w.r.t. RefDate FullGridOutput = 0 # Full grid output mode (0: compact, 1: full time-varying grid data) EulerVelocities = 0 # Euler velocities output (0: GLM, 1: Euler velocities) Wrirst_bnd = 1 # Write waterlevel, bedlevel and coordinates of boundaries to restart files Wrishp_crs = 0 # Write a shape file for cress sections Wrishp_obs = 0 # Write a shape file for observation points Wrishp_weir = 0 # Write a shape file for weirs Wrishp_thd = 0 # Write a shape file for thin dams Wrishp_gate = 0 # Write a shape file for gates Wrishp_emb = 0 # Write a shape file for embankments Wrishp_fxw = 0 # Write a shape file for fixed weirs Wrishp_src = 0 # Write a shape file for sourse-sinks Wrishp_pump = 0 # Write a shape file for pumps Wrishp_dryarea = 0 # Write a shape file for dry areas [particles] ParticlesFile = AddTracer = 0 # add tracer (1) or not (other) StartTime = 0. # starttime (if >0) TimeStep = 0. # time step (>0) or every computational time step 3Dtype = 0 # 3D type: depth averaged (0) or free surface (1) ** INFO : ** ** INFO : Writing initial output to file(s)... ** DEBUG : Opened NetCDF file 'dflowfmoutput\t02_his.nc' as #4. ** DEBUG : Opened NetCDF file 'dflowfmoutput\t02_map.nc' as #5. ** INFO : Done writing initial output to file(s). ** INFO : Sim. time done Sim. time left Real time used Real time left Steps left Complete% Interval-averaged time step ** INFO : 0d 0:00:01 1d 9:19:59 0d 0:00:00 0d 0:22:13 499994 0.0% 0.00000 ** INFO : 0d 0:34:19 1d 8:45:41 0d 0:00:28 0d 0:27:02 491418 1.7% 0.12241 ** INFO : 0d 1:07:14 1d 8:12:46 0d 0:00:58 0d 0:27:42 483193 3.4% 0.12000 ** INFO : 0d 1:38:13 1d 7:41:47 0d 0:01:28 0d 0:28:25 475445 4.9% 0.12000 ** INFO : 0d 2:10:47 1d 7:09:13 0d 0:01:58 0d 0:28:09 467304 6.5% 0.12000 ** INFO : 0d 2:43:27 1d 6:36:33 0d 0:02:27 0d 0:27:36 459138 8.2% 0.12000 ** INFO : 0d 3:17:47 1d 6:02:13 0d 0:02:57 0d 0:26:56 450554 9.9% 0.12000 ** INFO : 0d 3:52:29 1d 5:27:31 0d 0:03:26 0d 0:26:10 441879 11.6% 0.12000 ** INFO : 0d 4:27:22 1d 4:52:38 0d 0:03:56 0d 0:25:31 433158 13.4% 0.12000 ** INFO : 0d 5:02:13 1d 4:17:47 0d 0:04:25 0d 0:24:49 424447 15.1% 0.12000 ** INFO : 0d 5:36:53 1d 3:43:07 0d 0:04:54 0d 0:24:13 415778 16.8% 0.12000 ** INFO : 0d 6:11:28 1d 3:08:32 0d 0:05:24 0d 0:23:40 407132 18.6% 0.12000 ** INFO : 0d 6:44:55 1d 2:35:05 0d 0:05:54 0d 0:23:13 398770 20.2% 0.12000 ** INFO : 0d 7:17:15 1d 2:02:45 0d 0:06:23 0d 0:22:50 390688 21.9% 0.12000 ** INFO : 0d 7:49:15 1d 1:30:45 0d 0:06:52 0d 0:22:25 382688 23.5% 0.12000 ** INFO : 0d 8:21:46 1d 0:58:14 0d 0:07:21 0d 0:21:57 374558 25.1% 0.12000 ** INFO : 0d 8:54:26 1d 0:25:34 0d 0:07:51 0d 0:21:31 366391 26.7% 0.12000 ** INFO : 0d 9:27:19 0d 23:52:41 0d 0:08:21 0d 0:21:04 358171 28.4% 0.12000 ** INFO : 0d 10:02:08 0d 23:17:52 0d 0:08:49 0d 0:20:29 349466 30.1% 0.12000 ** INFO : 0d 10:37:03 0d 22:42:57 0d 0:09:19 0d 0:19:55 340738 31.9% 0.12000 ** INFO : 0d 11:12:00 0d 22:08:00 0d 0:09:48 0d 0:19:22 331999 33.6% 0.12000 ** INFO : 0d 11:43:24 0d 21:36:36 0d 0:10:17 0d 0:18:57 324149 35.2% 0.12000 ** INFO : 0d 12:15:57 0d 21:04:03 0d 0:10:46 0d 0:18:29 316011 36.8% 0.12000 ** INFO : 0d 12:46:29 0d 20:33:31 0d 0:11:14 0d 0:18:05 308380 38.3% 0.12000 ** INFO : 0d 13:17:29 0d 20:02:31 0d 0:11:43 0d 0:17:40 300629 39.9% 0.12000 ** INFO : 0d 13:50:31 0d 19:29:29 0d 0:12:13 0d 0:17:12 292372 41.5% 0.12000 ** INFO : 0d 14:22:58 0d 18:57:02 0d 0:12:42 0d 0:16:44 284259 43.1% 0.12000 ** INFO : 0d 14:55:27 0d 18:24:33 0d 0:13:12 0d 0:16:17 276136 44.8% 0.12000 ** INFO : 0d 15:28:05 0d 17:51:55 0d 0:13:41 0d 0:15:48 267979 46.4% 0.12000 ** INFO : 0d 16:00:04 0d 17:19:56 0d 0:14:09 0d 0:15:20 259983 48.0% 0.12000 ** INFO : 0d 16:32:19 0d 16:47:41 0d 0:14:39 0d 0:14:52 251919 49.6% 0.12000 ** INFO : 0d 17:05:05 0d 16:14:55 0d 0:15:08 0d 0:14:23 243730 51.3% 0.12000 ** INFO : 0d 17:36:05 0d 15:43:55 0d 0:15:38 0d 0:13:58 235980 52.8% 0.12000 ** INFO : 0d 18:04:56 0d 15:15:04 0d 0:16:08 0d 0:13:37 228767 54.2% 0.10778 ** INFO : 0d 18:07:56 0d 15:12:04 0d 0:16:51 0d 0:14:07 228017 54.4% 0.00768 ** INFO : 0d 18:10:18 0d 15:09:42 0d 0:17:34 0d 0:14:39 227424 54.5% 0.00621 ** INFO : 0d 18:12:31 0d 15:07:29 0d 0:18:16 0d 0:15:10 226872 54.6% 0.00559 ** INFO : 0d 18:14:18 0d 15:05:42 0d 0:19:01 0d 0:15:44 226423 54.7% 0.00527 ** INFO : 0d 18:15:52 0d 15:04:08 0d 0:19:46 0d 0:16:18 226032 54.8% 0.00508 ** INFO : 0d 18:17:44 0d 15:02:16 0d 0:20:29 0d 0:16:51 225565 54.9% 0.00494 ** INFO : 0d 18:19:33 0d 15:00:27 0d 0:21:13 0d 0:17:22 225111 55.0% 0.00481 ** INFO : 0d 18:21:20 0d 14:58:40 0d 0:21:56 0d 0:17:54 224666 55.1% 0.00469 ** INFO : 0d 18:23:13 0d 14:56:47 0d 0:22:39 0d 0:18:25 224195 55.2% 0.00465 ** INFO : 0d 18:25:05 0d 14:54:55 0d 0:23:23 0d 0:18:56 223731 55.3% 0.00455 ** INFO : 0d 18:26:48 0d 14:53:12 0d 0:24:06 0d 0:19:27 223299 55.3% 0.00447 ** INFO : 0d 18:28:35 0d 14:51:25 0d 0:24:50 0d 0:19:58 222855 55.4% 0.00438 ** INFO : 0d 18:30:19 0d 14:49:41 0d 0:25:33 0d 0:20:29 222420 55.5% 0.00429 *** WARNING Bed change exceeds 5.0 % of waterdepth after 855604 timesteps, flow node = (15) *** WARNING Bed change exceeds 5.0 % of waterdepth after 855605 timesteps, flow node = (15) *** WARNING Bed change exceeds 5.0 % of waterdepth after 855606 timesteps, flow node = (15) *** WARNING Bed change exceeds 5.0 % of waterdepth after 855607 timesteps, flow node = (15) *** WARNING Bed change exceeds 5.0 % of waterdepth after 855608 timesteps, flow node = (15) *** WARNING Bed change exceeds 5.0 % of waterdepth after 855609 timesteps, flow node = (15) *** WARNING Bed change exceeds 5.0 % of waterdepth after 855610 timesteps, flow node = (15) *** WARNING Bed change exceeds 5.0 % of waterdepth after 855611 timesteps, flow node = (15) *** WARNING Bed change exceeds 5.0 % of waterdepth after 855612 timesteps, flow node = (15) *** WARNING Bed change exceeds 5.0 % of waterdepth after 855613 timesteps, flow node = (15) *** WARNING Bed change exceeds 5.0 % of waterdepth after 855614 timesteps, flow node = (15) *** WARNING Bed change exceeds 5.0 % of waterdepth after 855615 timesteps, flow node = (15) *** WARNING Bed change exceeds 5.0 % of waterdepth after 855616 timesteps, flow node = (15) *** WARNING Bed change exceeds 5.0 % of waterdepth after 855617 timesteps, flow node = (15) *** WARNING Bed change exceeds 5.0 % of waterdepth after 855618 timesteps, flow node = (15) *** WARNING Bed change exceeds 5.0 % of waterdepth after 855619 timesteps, flow node = (15) *** WARNING Bed change exceeds 5.0 % of waterdepth after 855620 timesteps, flow node = (15) ** INFO : 0d 18:32:11 0d 14:47:49 0d 0:26:17 0d 0:20:59 221953 55.6% 0.00420 ** INFO : 0d 18:34:02 0d 14:45:58 0d 0:27:00 0d 0:21:29 221490 55.7% 0.00407 ** INFO : 0d 18:35:51 0d 14:44:09 0d 0:27:44 0d 0:21:59 221038 55.8% 0.00397 ** INFO : 0d 18:37:37 0d 14:42:23 0d 0:28:28 0d 0:22:29 220595 55.9% 0.00389 ** INFO : 0d 18:39:17 0d 14:40:43 0d 0:29:12 0d 0:22:59 220180 56.0% 0.00381 ** INFO : 0d 18:40:47 0d 14:39:13 0d 0:29:54 0d 0:23:28 219804 56.0% 0.00376 ** INFO : 0d 18:42:19 0d 14:37:41 0d 0:30:38 0d 0:23:57 219422 56.1% 0.00372 ** INFO : 0d 18:43:49 0d 14:36:11 0d 0:31:22 0d 0:24:27 219044 56.2% 0.00365 ** INFO : 0d 18:45:18 0d 14:34:42 0d 0:32:06 0d 0:24:57 218676 56.3% 0.00357 ** INFO : 0d 18:46:46 0d 14:33:14 0d 0:32:49 0d 0:25:26 218307 56.3% 0.00358 ** INFO : 0d 18:48:12 0d 14:31:48 0d 0:33:32 0d 0:25:55 217949 56.4% 0.00355 ** INFO : 0d 18:49:30 0d 14:30:30 0d 0:34:15 0d 0:26:24 217625 56.5% 0.00351 ** INFO : 0d 18:50:48 0d 14:29:12 0d 0:34:59 0d 0:26:53 217298 56.5% 0.00346 ** INFO : 0d 18:52:16 0d 14:27:44 0d 0:35:43 0d 0:27:22 216934 56.6% 0.00349 ** INFO : 0d 18:53:39 0d 14:26:21 0d 0:36:26 0d 0:27:51 216588 56.7% 0.00307 ** INFO : 0d 18:55:02 0d 14:24:58 0d 0:37:09 0d 0:28:19 216242 56.8% 0.00302 ** INFO : 0d 18:56:22 0d 14:23:38 0d 0:37:53 0d 0:28:48 215909 56.8% 0.00296 ** INFO : 0d 18:57:37 0d 14:22:23 0d 0:38:37 0d 0:29:16 215597 56.9% 0.00299 ** INFO : 0d 18:58:51 0d 14:21:09 0d 0:39:20 0d 0:29:44 215286 56.9% 0.00296 ** INFO : 0d 19:00:04 0d 14:19:56 0d 0:40:03 0d 0:30:12 214984 57.0% 0.00290 ** INFO : 0d 19:01:17 0d 14:18:43 0d 0:40:46 0d 0:30:40 214678 57.1% 0.00286 ** INFO : 0d 19:02:29 0d 14:17:31 0d 0:41:29 0d 0:31:08 214379 57.1% 0.00283 ** INFO : 0d 19:03:44 0d 14:16:16 0d 0:42:13 0d 0:31:36 214065 57.2% 0.00279 ** INFO : 0d 19:05:02 0d 14:14:58 0d 0:42:56 0d 0:32:03 213741 57.3% 0.00278 ** INFO : 0d 19:06:12 0d 14:13:48 0d 0:43:39 0d 0:32:31 213449 57.3% 0.00276 ** INFO : 0d 19:07:17 0d 14:12:43 0d 0:44:23 0d 0:32:59 213179 57.4% 0.00274 ** INFO : 0d 19:08:22 0d 14:11:38 0d 0:45:05 0d 0:33:26 212910 57.4% 0.00272 ** INFO : 0d 19:09:19 0d 14:10:41 0d 0:45:49 0d 0:33:55 212670 57.5% 0.00270 ** INFO : 0d 19:10:27 0d 14:09:33 0d 0:46:33 0d 0:34:22 212389 57.5% 0.00268 ** INFO : 0d 19:11:32 0d 14:08:28 0d 0:47:17 0d 0:34:50 212115 57.6% 0.00267 ** INFO : 0d 19:12:34 0d 14:07:26 0d 0:48:00 0d 0:35:17 211859 57.6% 0.00263 ** INFO : 0d 19:13:42 0d 14:06:18 0d 0:48:43 0d 0:35:44 211573 57.7% 0.00261 ** INFO : 0d 19:14:42 0d 14:05:18 0d 0:49:28 0d 0:36:13 211323 57.7% 0.00260 ** INFO : 0d 19:15:50 0d 14:04:10 0d 0:50:12 0d 0:36:40 211042 57.8% 0.00295 ** INFO : 0d 19:16:59 0d 14:03:01 0d 0:50:55 0d 0:37:06 210754 57.8% 0.00314 ** INFO : 0d 19:18:16 0d 14:01:44 0d 0:51:39 0d 0:37:32 210435 57.9% 0.00289 ** INFO : 0d 19:19:31 0d 14:00:29 0d 0:52:22 0d 0:37:58 210120 58.0% 0.00273 ** INFO : 0d 19:20:45 0d 13:59:15 0d 0:53:06 0d 0:38:23 209812 58.0% 0.00268 ** INFO : 0d 19:21:54 0d 13:58:06 0d 0:53:50 0d 0:38:50 209524 58.1% 0.00267 ** INFO : 0d 19:23:00 0d 13:57:00 0d 0:54:33 0d 0:39:16 209250 58.1% 0.00264 ** INFO : 0d 19:24:03 0d 13:55:57 0d 0:55:17 0d 0:39:42 208987 58.2% 0.00265 ** INFO : 0d 19:25:08 0d 13:54:52 0d 0:56:01 0d 0:40:08 208718 58.3% 0.00262 ** INFO : 0d 19:26:10 0d 13:53:50 0d 0:56:45 0d 0:40:34 208459 58.3% 0.00260 ** INFO : 0d 19:27:10 0d 13:52:50 0d 0:57:29 0d 0:41:01 208210 58.4% 0.00258 ** INFO : 0d 19:28:09 0d 13:51:51 0d 0:58:13 0d 0:41:27 207964 58.4% 0.00256 ** INFO : 0d 19:29:08 0d 13:50:52 0d 0:58:56 0d 0:41:53 207715 58.5% 0.00253 ** INFO : 0d 19:30:12 0d 13:49:48 0d 0:59:40 0d 0:42:19 207452 58.5% 0.00257 ** INFO : 0d 19:31:17 0d 13:48:43 0d 1:00:24 0d 0:42:44 207181 58.6% 0.00263 ** INFO : 0d 19:32:22 0d 13:47:38 0d 1:01:07 0d 0:43:09 206908 58.6% 0.00264 ** INFO : 0d 19:33:23 0d 13:46:37 0d 1:01:50 0d 0:43:34 206654 58.7% 0.00264 ** INFO : 0d 19:34:24 0d 13:45:36 0d 1:02:34 0d 0:43:59 206399 58.7% 0.00263 ** INFO : 0d 19:35:27 0d 13:44:33 0d 1:03:17 0d 0:44:23 206136 58.8% 0.00261 ** INFO : 0d 19:36:33 0d 13:43:27 0d 1:04:00 0d 0:44:48 205862 58.8% 0.00260 ** INFO : 0d 19:37:36 0d 13:42:24 0d 1:04:44 0d 0:45:12 205600 58.9% 0.00255