* Deltares, D-Flow FM Version 1.2.0.55920M, May 31 2018, 20:05:27 * Source: https://svn.oss.deltares.nl/repos/delft3d/branches/research/Deltares/dflowfm_development/ * File creation date: 10:33:30, 19-06-2018 ** DEBUG : 0 0.1000020 NOD(KMAX) ** DEBUG : 6 0.7000140 XK (KMAX), YK (KMAX), ZK (KMAX), KC (KMAX), NMK (KMAX), RNOD(KMAX) ** DEBUG : 6 9.9999998E-03 XS(NSMAX) ** DEBUG : 6 9.9999998E-03 YS(NSMAX) ** DEBUG : 6 9.9999998E-03 ZS(NSMAX) ** DEBUG : 6 9.9999998E-03 IPSAM ** DEBUG : 7 5.0000001E-02 xlan(maxlan) ** DEBUG : 7 5.0000001E-02 ylan(maxlan) ** DEBUG : 7 5.0000001E-02 zlan(maxlan) ** DEBUG : 8 2.5000000E-02 nclan(maxlan) Until here copy of previous diagnostic file ** WARNING: TimeSplitInterval invalid, disabling time partitioning of output. Got: 0X ** WARNING: readMDUFile: [output] wrihis_heatflux=1 was in file, but not used. Check possible typo. ** INFO : Reading Network ... ** DEBUG : 8 1.0090000E-03 hashfirst(0:hashcon - 1) ** DEBUG : 8 1.0090000E-03 hashfirst(0:hashcon - 1) ** INFO : Reading Network Done ** INFO : 1D-Network Reading Done ** INFO : Reading Roughness ... ** DEBUG : 8 1.0090000E-03 hashfirst(0:hashcon - 1) ** INFO : Reading Roughness Done ** INFO : Reading Cross Section Definitions ... ** DEBUG : 8 2.0000001E-03 CSDef%CS(CSDef%Size+CSDef%growsBy) ** DEBUG : 8 1.0090000E-03 hashfirst(0:hashcon - 1) ** INFO : Reading Cross Section Definitions Done ** INFO : Reading Cross Section Locations ... ** INFO : Reading Cross Section Locations Done ** INFO : Reading Structures ... ** INFO : Reading Structures Done ** INFO : Reading Retentions ... ** DEBUG : 8 1.0090000E-03 hashfirst(0:hashcon - 1) ** INFO : Reading Retentions Done ** INFO : Reading Advanced Parameters ... ** INFO : Reading Advanced Parameters Done ** INFO : All 1D-Reading Done ** DEBUG : unc_read_net_ugrid: net file 'dummy_net.nc' is not UGRID. No problem, will fall back to old format reader. ** DEBUG : Opened 'dummy_net.nc' as # 3. ** DEBUG : Closed NetCDF file 'dummy_net.nc. ** INFO : Opened file : c2X_crs.pli ** INFO : Closed file : c2X_crs.pli ** INFO : Initializing flow model geometry... ** DEBUG : Opened 'dummy_net.nc' as # 3. ** DEBUG : Renumber flow nodes... ** DEBUG : Sumdiff: 61 Sumdiff renum: 61 ** DEBUG : Bandwidth: 1 Bandwidth renum: 1 ** INFO : Opened file : c2X_es.ext ** DEBUG : 8 1.0710000E-03 kce(nx), ke(nx), kez(nx), keu(nx), kes(nx), ketm(nx), kesd(nx), keuxy(nx), ket(nx), ken(nx), ke1d2d(nx), keg(nx), ked(nx), kep(nx), kedb(nx), keklep(nx), kegs(nx), kegen(nx), itpez(nx), itpenz(nx), itpeu(nx) , itpenu(nx) , kew(nx), ftpet(nx) ** INFO : Opened file : bc_us_T1_dis.pli ** INFO : Closed file : bc_us_T1_dis.pli ** INFO : boundary: 'bc_us_T1_dis.pli' opened 1 cells. ** INFO : dischargebnd bc_us_T1_dis.pli 1 nr of open bndcells ** INFO : Opened file : bc_ds_T1_waterlevel.pli ** INFO : Closed file : bc_ds_T1_waterlevel.pli ** INFO : boundary: 'bc_ds_T1_waterlevel.pli' opened 1 cells. ** INFO : waterlevelbnd bc_ds_T1_waterlevel.pli 1 nr of open bndcells ** DEBUG : addexternalboundarypoints: added 0 bnd points for SOBEK1D-FM2D connections. ** INFO : setbedlevelfromextfile: Using bedlevel as specified in net-file. ** INFO : setbedlevelfromextfile: Unspecified bedlevels replaced using value from BedlevUni. ** INFO : setbedlevelfromextfile: Mirroring input bedlevels at open boundaries. ** INFO : Done initializing flow model geometry. Sediment fraction 1: Sediment1 ** WARNING: No Nodal Point Relations Specified, Set to (Default) Proportional. ** WARNING: Exponent of Discharge Ratio Set to Default: k = 1 ** WARNING: Exponent of Width Ratio Set to Default : m = 0 *** Start of underlayer input Underlayer mechanism : 1 Boundary name : bc_us_T1_dis Composition condition prescribed : fixed Boundary name : bc_ds_T1_waterlevel Composition condition prescribed : fixed Initial bed composition : from sediment file *** End of underlayer input Determining transport formulation(s) Reading: engelund-hansen.tra Input file : engelund-hansen.tra File in traditional MOR-format. *** Start of sediment input Ref concentration : 0.1600E+04 Option Dss : 0 Uniform mud content : 0.0000E+00 Sediment number : 1 Name : Sediment1 Type : bedload RHOSOL : 0.2650E+04 sed. distribution : piecewise loguniform SedD10 : 0.1500E-03 SedD50 : 0.2000E-03 SedDM : 0.2142E-03 SedD90 : 0.3000E-03 CDRYB : 0.1600E+04 Uniform IniThick : 0.5000E+01 [m] Formula name : Engelund-Hansen (1967) Transport formula used : 1 ACal : 0.1000E+01 RouKs : 0.0000E+00 SusFac : 0.0000E+00 *** End of sediment input *** Start of morphological input Morphological Timescale Factor : 0.1000E+01 Morphological Changes Start Time (Tunit=M) : 0.1440E+04 Fixed Layer Erosion Threshold : 0.1000E+00 Bed level updating : ACTIVE Composition updating : ACTIVE Entrainment/deposition flux in mass bal. : INCLUDED Sand Equili. conc. profs. at boundaries : USED Mud Equili. conc. profs. at boundaries : NOT USED Sediment included in fluid density calc. : YES AKSFAC : 0.1000E+01 RWAVE : 0.2000E+01 Equilibrium sed. conc. profiles :calculated (D3D mix) Suspended sed. multiplication factor : 0.1000E+01 Bed load transp. multiplication factor : 0.1000E+01 wave-rel. susp.sed.transp.fact.(SUSW) : 0.1000E+01 wave-rel. bed-ld.sed.transp.fact.(BEDW) : 0.1000E+01 Min.depth for sed. calculations(SEDTHR) : 0.5000E+00 Glob./max. dry cell erosion fact(THETSD) : 0.0000E+00 Max depth for variable THETSD (HMAXTH) : 0.1000E+01 Computing THETSD for dry bank erosion Tuning param. Shields Taucr (FACTCR) : 0.1000E+01 GLM velocities i.s.o Eulerian velocities for bed load transport and reference conc: NO EPSPAR: Always use Van Rijns param. mix. dist. : NO Standard option: Rc from Flow, Rw=RWAVE*0.025 : 1 Update bed level at inflow boundaries : NO Merge bottoms from parallel runs : NO Source/sink limiter DZMAX(depth frac.) : 0.5000E-01 Max. volumetric ref. conc. CAMAX : 0.6500E+00 Hiding & exposure formulation : None Bed slope effect formulation : Bagnold ALFABS : 0.1000E+01 ALFABN : 0.1500E+01 Requested percentile(s) : 10.0000 : 15.0000 : 16.0000 : 50.0000 : 84.0000 : 90.0000 Output transport rates : volume excl. pores Boundary name : bc_us_T1_dis Depth change prescribed : time series Variation along boundary : uniform Boundary name : bc_ds_T1_waterlevel Depth prescribed : free *** End of morphological input ** INFO : Finding crossed flowlinks... ** INFO : done ** INFO : Start initializing external forcings... ** INFO : External Forcing or Initialising 'dischargebnd' from file 'bc_us_T1_dis.pli'. ** INFO : External Forcing or Initialising 'waterlevelbnd' from file 'bc_ds_T1_waterlevel.pli'. ** INFO : External Forcing or Initialising 'initialwaterlevel' from file 'initialwaterlevel.xyz'. ** INFO : Opened file : initialwaterlevel.xyz ** INFO : merged 0 samples in .00 seconds. ** INFO : Closed file : initialwaterlevel.xyz ** INFO : Closed file : c2X_es.ext ** INFO : Done initializing external forcings. ** INFO : nogauss , nocg : 60 0 ** INFO : Finding crossed flowlinks... ** INFO : done ** INFO : Modelinit finished at: 10:33:31, 19-06-2018 ** INFO : ** Model initialization was successful ** ** INFO : * Active Model definition: # Generated on 10:33:31, 19-06-2018 # Deltares, D-Flow FM Version 1.2.0.55920M, May 31 2018, 20:05:27 # Source:https://svn.oss.deltares.nl/repos/delft3d/branches/research/Deltares/dflowfm_development/ [model] Program = D-Flow FM Version = 1.2.0.55920M MDUFormatVersion = 1.06 # File format version (do not edit this) AutoStart = 2 # Autostart simulation after loading MDU (0: no, 1: autostart, 2: autostartstop) ModelSpecific = # Optional 'model specific ID', to enable certain custom runtime function calls (instead of via MDU name). [geometry] NetFile = dummy_net.nc # Unstructured grid file *_net.nc GridEnclosureFile = # Enclosure file to clip outer parts from the grid *.pol BedlevelFile = # Bedlevels points file e.g. *.xyz, only needed for bedlevtype not equal 3 DryPointsFile = # Dry points file *.xyz (third column dummy z values), or dry areas polygon file *.pol (third column 1/-1: inside/outside) WaterLevIniFile = # Initial water levels sample file *.xyz LandBoundaryFile = # Land boundaries file *.ldb, used for visualization ThinDamFile = # Polyline file *_thd.pli, containing thin dams FixedWeirFile = # Polyline file *_fxw.pliz, containing fixed weirs with rows x, y, crest level, left ground level, right ground level PillarFile = # Polyline file *_pillar.pliz, containing four colums with x, y, diameter and Cd coefficient Gulliesfile = # Polyline file *_gul.pliz, containing lowest bed level along talweg x, y, z level Roofsfile = # Polyline file *_rof.pliz, containing roofgutter heights x, y, z level VertplizFile = # Vertical layering file *_vlay.pliz with rows x, y, Z, first Z, nr of layers, second Z, layer type ProflocFile = # Channel profile location file *_proflocation.xyz with rows x, y, z, profile number ref ProfdefFile = # Channel profile definition file *_profdefinition.def with definition for all profile numbers ProfdefxyzFile = # Channel profile definition file _profdefinition.def with definition for all profile numbers Uniformwidth1D = 200. # Uniform width for channel profiles not specified by profloc Uniformheight1D = 3. # Uniform height for channel profiles not specified by profloc StructureFile = # File *.ini containing list of structures (pumps, weirs, gates and general structures) ManholeFile = # File *.ini containing manholes PipeFile = # File *.pliz containing pipe-based 'culverts' ShipdefFile = # File *.shd containing ship definitions WaterLevIni = 5. # Initial water level at missing s0 values BedlevUni = -5. # Uniform bed level used at missing z values if BedlevType > 2 BedlevType = 1 # Bathymetry specification # 1: at cell centers (from BathymetryFile) # 2: at faces (from BathymetryFile) # 3: at nodes, face levels mean of node values # 4: at nodes, face levels min. of node values # 5: at nodes, face levels max. of node values # 6: at nodes, face levels max. of cell-center values Blmeanbelow = -999. # If not -999d0, below this level the cell center bed level is the mean of surrouding net nodes Blminabove = -999. # If not -999d0, above this level the cell center bed level is the min. of surrouding net nodes Groundlayerthickness = -999. # Only in pipes: groundlayer thickness (m) PartitionFile = # Domain partition polygon file *_part.pol for parallel run AngLat = 0. # Angle of latitude S-N (deg), 0: no Coriolis AngLon = 0. # Angle of longitude E-W (deg), 0: Greenwich, used in solar heat flux computation. Conveyance2D = -1 # -1: R=HU,0: R=H, 1: R=A/P, 2: K=analytic-1D conv, 3: K=analytic-2D conv Nonlin1D = 1 # Non-linear 1D volumes, 1 = pipes open, 2 = pipes closed Slotw2D = 0. # - Sillheightmin = 0.5 # Weir treatment only if both sills larger than this value (m) Makeorthocenters = 0 # Switch from circumcentres to orthocentres in geominit (i>=1: number of iterations, 0: do not use) Dcenterinside = 1. # Limit cell center (1.0: in cell, 0.0: on c/g) Bamin = 1.d-6 # Minimum grid cell area, in combination with cut cells OpenBoundaryTolerance = 3. # Search tolerance factor between boundary polyline and grid cells, in cell size units RenumberFlowNodes = 1 # Renumber the flow nodes (1: yes, 0: no) Kmx = 0 # Maximum number of vertical layers Layertype = 1 # Vertical layer type (1: all sigma, 2: all z, 3: use VertplizFile) Numtopsig = 0 # Number of sigma layers in top of z-layer model SigmaGrowthFactor = 1. # Layer thickness growth factor from bed up StretchType = -1 # Type of layer stretching, 0 = uniform, 1 = user defined, 2 = fixed level double exponential [numerics] CFLMax = 0.7 # Maximum Courant number Lincontin = 0 # Default 0; Set to 1 for linearizing d(Hu)/dx; link to AdvecType AdvecType = 33 # Advection type (0: none, 1: Wenneker, 2: Wenneker q(uio-u), 3: Perot q(uio-u), 4: Perot q(ui-u), 5: Perot q(ui-u) without itself) TimeStepType = 2 # Time step handling (0: only transport, 1: transport + velocity update, 2: full implicit step-reduce, 3: step-Jacobi, 4: explicit) Icoriolistype = 5 # 0=No, 1=yes, if jsferic then spatially varying, if icoriolistype==6 then constant (anglat) Limtyphu = 0 # Limiter type for waterdepth in continuity eqn. (0: none, 1: minmod, 2: van Leer, 3: Kooren, 4: monotone central) Limtypmom = 4 # Limiter type for cell center advection velocity (0: none, 1: minmod, 2: van Leer, 3: Kooren, 4: monotone central) Limtypsa = 4 # Limiter type for salinity transport (0: none, 1: minmod, 2: van Leer, 3: Kooren, 4: monotone central) TransportMethod = 1 # Transport method (0: Herman's method, 1: transport module) TransportTimestepping = 1 # Timestepping method in Transport module, 0 = global, 1 = local (default) Vertadvtypsal = 6 # Vertical advection type for salinity (0: none, 1: upwind explicit, 2: central explicit, 3: upwind implicit, 4: central implicit, 5: central implicit but upwind for neg. stratif., 6: higher order explicit, no Forester) Vertadvtyptem = 6 # Vertical advection type for temperature (0: none, 1: upwind explicit, 2: central explicit, 3: upwind implicit, 4: central implicit, 5: central implicit but upwind for neg. stratif., 6: higher order explicit, no Forester) Cffacver = 0. # Factor for including (1-CFL) in HO term vertical (0d0: no, 1d0: yes) Jarhoxu = 0 # Inlcude density gradient in advection term (0: no, 1: yes, 2: Also in barotrop and baroclin pressure term) Horadvtypzlayer = 0 # Horizontal advection treatment of z-layers (1: default, 2: sigma-like) Zlayeratubybob = 0 # Lowest connected cells governed by bob instead of by bL L/R Icgsolver = 4 # Solver type (1: sobekGS_OMP, 2: sobekGS_OMPthreadsafe, 3: sobekGS, 4: sobekGS + Saadilud, 5: parallel/global Saad, 6: parallel/Petsc, 7: parallel/GS) Maxdegree = 6 # Maximum degree in Gauss elimination Noderivedtypes = 5 # 0=use der. types. , 1 = less, 2 = lesser, 5 = also dealloc der. types FixedWeirScheme = 0 # Fixed weir scheme (0: none, 1: compact stencil, 2: whole tile lifted, full subgrid weir + factor) FixedWeirContraction = 1. # Fixed weir flow width contraction factor Fixedweirfrictscheme = 0 # Fixed weir friction scheme (0: friction based on hu, 1: friction based on subgrid weir friction scheme) Fixedweirtopwidth = 3. # Uniform width of the groyne part of fixed weirs Fixedweirtopfrictcoef = -999. # Uniform friction coefficient of the groyne part of fixed weirs Fixedweirtalud = 4. # Uniform talud slope of fixed weirs Izbndpos = 0 # Position of z boundary (0: D3Dflow, 1: on net boundary, 2: on specified polyline) Tlfsmo = 0. # Fourier smoothing time (s) on water level boundaries Logprofatubndin = 1 # ubnds inflow: 0=uniform U1, 1 = log U1, 2 = user3D Logprofkepsbndin = 0 # inflow: 0=0 keps, 1 = log keps, 2 = user3D Slopedrop2D = 0. # Apply drop losses only if local bed slope > Slopedrop2D, (<=0: no drop losses) Drop3D = -999. # Apply droplosses in 3D if z upwind below bob + 2/3 hu*drop3D Chkadvd = 0.1 # Check advection terms if depth < chkadvdp, => less setbacks Trsh_u1Lb = 0. # 2D bedfriction in 3D below this threshold (m) Epshstem = 1.d-3 # Only compute heatflx + evap if depth > epshstem Zwsbtol = 0. # tolerance for zws(kb-1) at bed Keepzlayeringatbed = 1 # bedlayerthickness = zlayerthickness at bed 0 or 1 Teta0 = 0.55 # Theta of time integration (0.5 < theta < 1) Qhrelax = 1.d-2 # Relaxation on Q-h open boundaries Jbasqbnddownwindhs = 0 # Water depth scheme at discharge boundaries (0: original hu, 1: downwind hs) cstbnd = 0 # Delft-3D type velocity treatment near boundaries for small coastal models (1: yes, 0: no) Maxitverticalforestersal = 0 # Forester iterations for salinity (0: no vertical filter for salinity, > 0: max nr of iterations) Maxitverticalforestertem = 0 # Forester iterations for temperature (0: no vertical filter for temperature, > 0: max nr of iterations) Turbulencemodel = 3 # Turbulence model (0: none, 1: constant, 2: algebraic, 3: k-epsilon, 4: k-tau) Turbulenceadvection = 3 # Turbulence advection (0: none, 3: horizontally explicit and vertically implicit) Eddyviscositybedfacmax = 0. # Limit eddy viscosity at bed ) AntiCreep = 0 # Include anti-creep calculation (0: no, 1: yes) Barocterm = 2 # (original = 1, current = 2 ) Maxwaterleveldiff = 0. # upper bound (in m) on water level changes (<= 0: no bounds). Run will abort when violated. Maxvelocitydiff = 0. # upper bound (in m/s) on velocity changes (<= 0: no bounds). Run will abort when violated. MinTimestepBreak = 0. # smallest allowed timestep (in s), checked on a sliding average of several timesteps. Run will abort when violated. Epshu = 1.d-4 # Threshold water depth for wet and dry cells SobekDFM_umin = 0. # Minimal velocity treshold for weir losses in Sobek-DFM coupling. SobekDFM_umin_method = 0 # Method for minimal velocity treshold for weir losses in Sobek-DFM coupling. SobekDFM_Minimal_1d2d_Embankment = 1.d-2 # Minimal crest height of 1D2D SOBEK-DFM embankments. sobekDFM_relax = 0.1 # Relaxation factor for SOBEK-DFM coupling algorithm. Vertadvtypmom = 3 # vertical advection for u1: 0: No, 3: Upwind implicit, 4: Central implicit, 5: QUICKEST implicit., 6: centerbased upwind expl jaupwindsrc = 1 # 1st-order upwind advection at sources/sinks (1) or higher-order (0) jasfer3D = 0 # corrections for spherical coordinates vicouv_filter = 0. # artificial viscosity for filtering (m2/s) LocSaltLev = 1. # salinity level for case of lock exchange LocSaltMin = 5. # minimum salinity for case of lock exchange LocSaltMax = 10. # maximum salinity for case of lock exchange Numlimdt_baorg = 0 # if previous numlimdt > Numlimdt_baorg keep original cell area ba in cutcell [physics] UnifFrictCoef = 50. # Uniform friction coefficient (0: no friction) UnifFrictType = 0 # Uniform friction type (0: Chezy, 1: Manning, 2: White-Colebrook, 3: idem, WAQUA style) UnifFrictCoef1D = 50. # Uniform friction coefficient in 1D links (0: no friction) UnifFrictCoef1D2D = 50. # Uniform friction coefficient in 1D links (0: no friction) UnifFrictCoefLin = 0. # Uniform linear friction coefficient for ocean models (m/s) (0: no friction) UnifFrictCoefGrLay = 0.100000001490116 # Uniform ground layer friction coefficient for ocean models (m/s) (0: no friction) Umodlin = 1. # Linear friction umod, for ifrctyp=4,5,6 Vicouv = 1. # Uniform horizontal eddy viscosity (m2/s) Dicouv = 1. # Uniform horizontal eddy diffusivity (m2/s) Vicoww = 5.d-5 # Uniform vertical eddy viscosity (m2/s) Dicoww = 5.d-5 # Uniform vertical eddy diffusivity (m2/s) Vicwminb = 0. # Minimum visc in prod and buoyancy term (m2/s) Xlozmidov = 0. # Ozmidov length scale (m), default=0.0, no contribution of internal waves to vertical diffusion Smagorinsky = 0. # Smagorinsky factor in horizontal turbulence, e.g. 0.15 Elder = 0. # Elder factor in horizontal turbulence irov = 0 # 0=free slip, 1 = partial slip using wall_ks wall_ks = 0. # Wall roughness type (0: free slip, 1: partial slip using wall_ks) Rhomean = 1000. # Average water density (kg/m3) Idensform = 1 # Density calulation (0: uniform, 1: Eckard, 2: Unesco, 3: baroclinic case) Ag = 9.81 # Gravitational acceleration TidalForcing = 0 # Tidal forcing, if jsferic=1 (0: no, 1: yes) SelfAttractionLoading = 0 # Self attraction and loading (0=no, 1=yes, 2=only self attraction) ITcap = 0. # Upper limit on internal tides dissipation (W/m^2) Doodsonstart = 55.565 # TRIWAQ: 55.565, D3D: 57.555 Doodsonstop = 375.575 # TRIWAQ: 375.575, D3D: 275.555 Doodsoneps = 3.d-2 # TRIWAQ = 0.0 400 cmps , D3D = 0.03 60 cmps VillemonteCD1 = 1. # Calibration coefficient for Villemonte. Default = 1.0. NB. For Bloemberg data set 0.8 is recommended. VillemonteCD2 = 10. # Calibration coefficient for Villemonte. Default = 10.0. NB. For Bloemberg data set 0.8 is recommended. Salinity = 0 # Include salinity, (0=no, 1=yes) InitialSalinity = 0. # Uniform initial salinity concentration (ppt) Sal0abovezlev = -999. # Vertical level (m) above which salinity is set 0 DeltaSalinity = -999. # for testcases Salimax = -999. # Limit the salinity Salimin = 0. # Limit the salinity Backgroundsalinity = 30. # Background salinity for eqn. of state (ppt) Backgroundwatertemperature = 20. # Background water temperature for eqn. of state (deg C) Temperature = 0 # Include temperature (0: no, 1: only transport, 3: excess model of D3D, 5: composite (ocean) model) InitialTemperature = 6. # Uniform initial water temperature (degC) Secchidepth = 1. # Water clarity parameter (m) Stanton = -1. # Coefficient for convective heat flux, if negative, Ccon = abs(Stanton)*Cdwind Dalton = -1. # Coefficient for evaporative heat flux, if negative, Ceva = abs(Dalton)*Cdwind Tempmax = -999. # Limit the temperature Tempmin = 0. # Limit the temperature Surftempsmofac = 0. # Hor . Smoothing factor for surface water in heatflx comp. (0.0-1.0), 0=no Soiltempthick = 0.1 # Use soil temperature buffer if > 0, e.g. 0.2 (m) Heat_eachstep = 1 # 1=heat each timestep, 0=heat each usertimestep SecondaryFlow = 0 # Secondary flow (0: no, 1: yes) BetaSpiral = 0. # Weight factor of the spiral flow intensity on flow dispersion stresses Equili = 0 # Equilibrium spiral flow intensity (0: no, 1: yes) [sediment] Sedimentmodelnr = 4 # Sediment model nr, (0=no, 1=Krone, 2=SvR2007, 3=E-H, 4=MorphologyModule) SedFile = test010g.sed # Sediment characteristics file (*.sed) MorFile = test010g.mor # Morphology settings file (*.mor) DredgeFile = # Dredging/dumping settings file (*.dad) TransportVelocity = 1 # Velocities for sediment transport, 0=Lagr bed+sus, 1=Eul bed + Lagr sus, 2=Eul bed+sus [veg] Vegetationmodelnr = 0 # Vegetation model nr, (0=no, 1=Baptist DFM) Clveg = 0.8 # Stem distance factor, default 0.8 () Cdveg = 0.7 # Stem Cd coefficient , default 0.7 () Cbveg = 0. # Stem stiffness coefficient , default 0.7 () Rhoveg = 0. # Stem Rho, if > 0, -> bouyant stick procedure, default 0.0 () Stemheightstd = 0. # Stem height standard deviation fraction, e.g. 0.1 () Densvegminbap = 0. # Minimum vegetation density in Baptist formula (1/m2) [wind] ICdtyp = 2 # Wind drag coefficient type (1=Const; 2=Smith&Banke (2 pts); 3=S&B (3 pts); 4=Charnock 1955, 5=Hwang 2005, 6=Wuest 2005, 7=Hersbach 2010 (2 pts) Cdbreakpoints = 6.3d-4 7.23d-3 # Wind drag coefficient break points Windspeedbreakpoints = 0. 100. # Wind speed break points (m/s) Relativewind = 0 # Wind speed relative to top-layer water speed, 1=yes, 0 = no) Rhoair = 1.2 # Air density (kg/m3) PavBnd = 0. # Average air pressure on open boundaries (N/m2) (only applied if > 0) Pavini = 0. # Average air pressure for initial water level correction (N/m2) (only applied if > 0) [grw] groundwater = 0 # 0=No (horizontal) groundwater flow, 1=With groundwater flow Infiltrationmodel = 0 # 0=No infiltration, 1=infiltration=interceptionlayer (with grw), 2=infiltration=Infiltrationcapacity, 3=model unsaturated/saturated (with grw) ( ) Hinterceptionlayer = 0. # Intercept this amount of rain (m) UnifInfiltrationCapacity = 0. # Uniform maximum infiltration capacity (m/s) Conductivity = 0. # non dimensionless K conductivity saturated (m/s), Q = K*A*i (m3/s) h_aquiferuni = 20. # bgrw = bl - h_aquiferuni (m), if negative, bgrw = bgrwuni h_unsatini = 0.200000002980232 # initial level groundwater is bedlevel - h_unsatini (m), if negative, sgrw = sgrwini [waves] Wavemodelnr = 0 # Wave model nr. (0: none, 1: fetch/depth limited hurdlestive, 2: Young-Verhagen, 3: SWAN, 4: wave group forcing, 5: uniform Wavenikuradse = 1.d-2 # Wave friction Nikuradse ks coefficient (m), used in Krone-Swart Rouwav = FR84 # Friction model for wave induced shear stress: FR84 (default) or: MS90, HT91, GM79, DS88, BK67, CJ85, OY88, VR04 Gammax = 1. # Maximum wave height/water depth ratio uorbfac = 0 # Orbital velocities: 0=D3D style; 1=Guza style jahissigwav = 1 # 1: sign wave height on his output; 0: hrms wave height on his output hminlw = 0.2 # Cut-off depth for application of wave forces in momentum balance [time] RefDate = 20140101 # Reference date (yyyymmdd) Tzone = 0. # Time zone assigned to input time series DtUser = 3600. # Time interval (s) for external forcing update DtNodal = 3600. # Time interval (s) for updating nodal factors in astronomical boundary conditions DtMax = 3600. # Maximal computation timestep (s) Dtfacmax = 1.1 # Max timestep increase factor ( ) DtInit = 3600. # Initial computation timestep (s) Timestepanalysis = 0 # 0=no, 1=see file *.steps Autotimestepdiff = 0 # 0 = no, 1 = yes (Time limitation based on explicit diffusive term) Tunit = M # Time unit for start/stop times (D, H, M or S) TStart = 0. # Start time w.r.t. RefDate (in TUnit) TStop = 2103840. # Stop time w.r.t. RefDate (in TUnit) [restart] RestartFile = # Restart netcdf-file, either *_rst.nc or *_map.nc RestartDateTime = yyyymmdd_HHMMSS # Restart date and time (YYYYMMDDHHMMSS) when restarting from *_map.nc [external forcing] ExtForceFile = c2X_es.ext # Old format for external forcings file *.ext, link with tim/cmp-format boundary conditions specification ExtForceFileNew = # New format for external forcings file *.ext, link with bc-format boundary conditions specification Rainfall = 0 # Include rainfall, (0=no, 1=yes) [trachytopes] TrtRou = # Include alluvial and vegetation roughness (trachytopes) (Y: yes, N: no) TrtDef = # File (*.ttd) including trachytope definitions TrtL = # File (*.arl) including distribution of trachytope definitions DtTrt = 1200. # Trachytope roughness update time interval (s) [calibration] UseCalibration = 0 # Activate calibration factor friction multiplier (1 = yes, 0 = no) DefinitionFile = # File (*.cld) including calibration definitions AreaFile = # File (*.cll) including area distribution of calibration definitions [output] OutputDir = # Output directory of map-, his-, rst-, dat- and timings-files, default: DFM_OUTPUT_. Set to . for current dir. FlowGeomFile = # Flow geometry NetCDF *_flowgeom.nc ObsFile = # Points file *.xyn with observation stations with rows x, y, station name CrsFile = c2X_crs.pli # Polyline file *_crs.pli defining observation cross sections FouFile = # Fourier analysis input file *.fou HisFile = # HisFile name *_his.nc MapFile = # MapFile name *_map.nc HisInterval = 3600. 0. 126230400. # History output times, given as "interval" "start period" "end period" (s) XLSInterval = 0. # Interval (s) between XLS history MapInterval = 3600. 0. 126230400. # Map file output, given as "interval" "start period" "end period" (s) RstInterval = 8640000. 0. 126230400.# Restart file output times, given as "interval" "start period" "end period" (s) S1incinterval = 0. # Interval (m) in incremental file for water levels S1 WaqInterval = 0. 0. 126230400. # DELWAQ output times, given as "interval" "start period" "end period" (s) StatsInterval = -5. # Screen step output interval in seconds simulation time, if negative in seconds wall clock time WriteBalancefile = 0 # Write balance file (1: yes, 0: no) TimingsInterval = 0. # Timings statistics output interval TimeSplitInterval = 0X # Time splitting interval, after which a new output file is started. value+unit, e.g. '1 M', valid units: Y,M,D,h,m,s. MapFormat = 4 # Map file format, 1: netCDF, 2: Tecplot, 3: netCFD and Tecplot, 4: NetCDF-UGRID Wrihis_balance = 1 # Write mass balance totals to his file (1: yes, 0: no) Wrihis_sourcesink = 1 # Write sources-sinks statistics to his file (1=yes, 0=no) Wrihis_structure_gen = 1 # Write general structure parameters to his file (1: yes, 0: no) Wrihis_structure_dam = 1 # Write dam parameters to his file (1: yes, 0: no) Wrihis_structure_pump = 1 # Write pump parameters to his file (1: yes, 0: no) Wrihis_structure_gate = 1 # Write gate parameters to his file (1: yes, 0: no) Wrihis_structure_weir = 1 # Write weir parameters to his file (1: yes, 0: no) Wrihis_turbulence = 1 # Write k, eps and vicww to his file (1: yes, 0: no) Wrihis_wind = 1 # Write wind velocities to his file (1: yes, 0: no) Wrihis_rain = 1 # Write precipitation to his file (1: yes, 0: no) Wrihis_temperature = 1 # Write temperature to his file (1: yes, 0: no) Wrihis_waves = 1 # Write wave data to his file (1: yes, 0: no) Wrihis_heat_fluxes = 0 # Write heat fluxes to his file (1: yes, 0: no) Wrihis_salinity = 1 # Write salinity to his file (1: yes, 0: no) Wrihis_density = 1 # Write density to his file (1: yes, 0: no) Wrihis_waterlevel_s1 = 1 # Write water level to his file (1: yes, 0: no) Wrihis_bedlevel = 1 # Write bed level to his file (1: yes, 0: no) Wrihis_waterdepth = 0 # Write waterd epth to his file (1: yes, 0: no) Wrihis_velocity_vector = 1 # Write velocity vectors to his file (1: yes, 0: no) Wrihis_upward_velocity_component = 0 # Write upward velocity to his file (1: yes, 0: no) Wrihis_sediment = 1 # Write sediment transport to his file (1: yes, 0: no) Wrihis_constituents = 1 # Write tracers to his file (1: yes, 0: no) Wrihis_zcor = 1 # Write vertical coordinates to his file (1: yes, 0: no) Wrimap_waterlevel_s0 = 1 # Write water levels for previous time step to map file (1: yes, 0: no) Wrimap_waterlevel_s1 = 1 # Write water levels to map file (1: yes, 0: no) Wrimap_volume1 = 0 # Write volumes to map file (1: yes, 0: no) Wrimap_velocity_component_u0 = 1 # Write velocity component for previous time step to map file (1: yes, 0: no) Wrimap_velocity_component_u1 = 1 # Write velocity component to map file (1: yes, 0: no) Wrimap_velocity_vector = 1 # Write cell-center velocity vectors to map file (1: yes, 0: no) Wrimap_upward_velocity_component = 1 # Write upward velocity component on cell interfaces (1: yes, 0: no) Wrimap_density_rho = 1 # Write flow density to map file (1: yes, 0: no) Wrimap_horizontal_viscosity_viu = 1 # Write horizontal viscosity to map file (1: yes, 0: no) Wrimap_horizontal_diffusivity_diu = 1 # Write horizontal diffusivity to map file (1: yes, 0: no) Wrimap_flow_flux_q1 = 1 # Write flow flux to map file (1: yes, 0: no) Wrimap_numlimdt = 1 # Write the number times a cell was Courant limiting to map file (1: yes, 0: no) Wrimap_taucurrent = 1 # Write the shear stress to map file (1: yes, 0: no) Wrimap_chezy = 1 # Write the chezy roughness to map file (1: yes, 0: no) Wrimap_sediment = 1 # Write sediment fractions to map file (1: yes, 0: no) Wrimap_turbulence = 1 # Write vicww, k and eps to map file (1: yes, 0: no) Wrimap_wind = 1 # Write wind velocities to map file (1: yes, 0: no) Writek_CdWind = 1 # Write wind friction coeffs to tek file (1: yes, 0: no) Writepart_domain = 1 # Write partition domain info. for postprocessing Richardsononoutput = 0 # Write Richardson numbers (1: yes, 0: no) Wrishp_crs = 0 # Write grid-snapped cross sections to shapefile (1: yes, 0: no) Wrishp_obs = 0 # Write grid-snapped observation stations to shapefile (1: yes, 0: no) Wrishp_weir = 0 # Write grid-snapped weirs to shapefile (1: yes, 0: no) Wrishp_thd = 0 # Write grid-snapped thin dams to shapefile (1: yes, 0: no) Wrishp_gate = 0 # Write grid-snapped gates to shapefile (1: yes, 0: no) Wrishp_emb = 0 # Write grid-snapped 1d2d embankments to shapefile (1: yes, 0: no) Wrishp_fxw = 0 # Write grid-snapped fixed weirs to shapefile (1: yes, 0: no) Wrishp_src = 0 # Write grid-snapped source-sinks to shapefile (1: yes, 0: no) Wrishp_pump = 0 # Write grid-snapped pumps to shapefile (1: yes, 0: no) WriteDFMinterpretedvalues = 0 # Write DFMinterpretedvalues (1: yes, 0: no) MapOutputTimeVector = # File (*.mpt) containing fixed map output times (s) w.r.t. RefDate FullGridOutput = 0 # Full grid output mode (0: compact, 1: full time-varying grid data) EulerVelocities = 0 # Euler velocities output (0: GLM, 1: Euler velocities) Wrirst_bnd = 1 # Write waterlevel, bedlevel and coordinates of boundaries to restart files Wrishp_crs = 0 # Write a shape file for cress sections Wrishp_obs = 0 # Write a shape file for observation points Wrishp_weir = 0 # Write a shape file for weirs Wrishp_thd = 0 # Write a shape file for thin dams Wrishp_gate = 0 # Write a shape file for gates Wrishp_emb = 0 # Write a shape file for embankments Wrishp_fxw = 0 # Write a shape file for fixed weirs Wrishp_src = 0 # Write a shape file for sourse-sinks Wrishp_pump = 0 # Write a shape file for pumps Wrishp_dryarea = 0 # Write a shape file for dry areas [particles] ParticlesFile = AddTracer = 0 # add tracer (1) or not (other) StartTime = 0. # starttime (if >0) TimeStep = 0. # time step (>0) or every computational time step 3Dtype = 0 # 3D type: depth averaged (0) or free surface (1) ** INFO : ** ** INFO : Start of the computation time loop ** INFO : Writing initial output to file(s)... ** DEBUG : Opened NetCDF file 'DFM_OUTPUT_c25_es\c25_es_his.nc' as #5. ** DEBUG : Opened NetCDF file 'DFM_OUTPUT_c25_es\c25_es_map.nc' as #6. ** DEBUG : Opened NetCDF file 'DFM_OUTPUT_c25_es\c25_es_20140101_000000_rst.nc' as #7. ** DEBUG : Closed NetCDF file 'DFM_OUTPUT_c25_es\c25_es_20140101_000000_rst.nc. ** INFO : Done writing initial output to file(s). ** INFO : Sim. time done Sim. time left Real time used Real time left Steps left Complete% Interval-averaged time step ** INFO : 0d 3:00:00 1460d 21:00:00 0d 0:00:00 0d 0:09:09 35061 0.0% 0.00000 ** INFO : 7d 13:00:00 1453d 11:00:00 0d 0:00:05 0d 0:15:56 34883 0.5% 128.57143 ** INFO : 14d 3:00:00 1446d 21:00:00 0d 0:00:10 0d 0:16:53 34725 1.0% 128.57143 ** INFO : 20d 0:00:00 1441d 0:00:00 0d 0:00:15 0d 0:17:46 34584 1.4% 128.57143 ** INFO : 26d 10:00:00 1434d 14:00:00 0d 0:00:20 0d 0:17:50 34430 1.8% 128.57143 ** INFO : 32d 17:00:00 1428d 7:00:00 0d 0:00:25 0d 0:17:54 34279 2.2% 128.57143 ** INFO : 39d 6:00:00 1421d 18:00:00 0d 0:00:30 0d 0:17:50 34122 2.7% 128.57143 ** INFO : 46d 3:00:00 1414d 21:00:00 0d 0:00:34 0d 0:17:37 33957 3.2% 128.57143 ** INFO : 52d 17:00:00 1408d 7:00:00 0d 0:00:39 0d 0:17:32 33799 3.6% 128.57143 ** INFO : 58d 12:00:00 1402d 12:00:00 0d 0:00:44 0d 0:17:42 33660 4.0% 128.57143 ** INFO : 65d 7:00:00 1395d 17:00:00 0d 0:00:49 0d 0:17:34 33497 4.5% 128.57143 ** INFO : 71d 19:00:00 1389d 5:00:00 0d 0:00:54 0d 0:17:28 33341 4.9% 128.57143 ** INFO : 78d 12:00:00 1382d 12:00:00 0d 0:00:59 0d 0:17:20 33180 5.4% 132.84437 ** INFO : 85d 7:00:00 1375d 17:00:00 0d 0:01:04 0d 0:17:11 33017 5.8% 133.33333 ** INFO : 92d 6:00:00 1368d 18:00:00 0d 0:01:09 0d 0:17:02 32850 6.3% 133.33333 ** INFO : 98d 20:00:00 1362d 4:00:00 0d 0:01:14 0d 0:16:56 32692 6.8% 131.63620 ** DEBUG : Opened NetCDF file 'DFM_OUTPUT_c25_es\c25_es_20140411_000000_rst.nc' as #7. ** DEBUG : Closed NetCDF file 'DFM_OUTPUT_c25_es\c25_es_20140411_000000_rst.nc. ** INFO : 103d 3:00:00 1357d 21:00:00 0d 0:01:19 0d 0:17:15 32589 7.1% 128.57143 ** INFO : 109d 8:00:00 1351d 16:00:00 0d 0:01:23 0d 0:17:12 32440 7.5% 128.57143 ** INFO : 115d 19:00:00 1345d 5:00:00 0d 0:01:28 0d 0:17:07 32285 7.9% 128.57143 ** INFO : 122d 3:00:00 1338d 21:00:00 0d 0:01:33 0d 0:17:03 32133 8.4% 128.57143 ** INFO : 126d 0:00:00 1335d 0:00:00 0d 0:01:38 0d 0:17:21 32040 8.6% 128.57143 ** INFO : 131d 17:00:00 1329d 7:00:00 0d 0:01:43 0d 0:17:22 31903 9.0% 128.57143 ** INFO : 137d 20:00:00 1323d 4:00:00 0d 0:01:48 0d 0:17:18 31756 9.4% 128.57143 ** INFO : 143d 12:00:00 1317d 12:00:00 0d 0:01:53 0d 0:17:18 31620 9.8% 128.57143 ** INFO : 149d 3:00:00 1311d 21:00:00 0d 0:01:58 0d 0:17:19 31485 10.2% 128.57143 ** INFO : 154d 22:00:00 1306d 2:00:00 0d 0:02:03 0d 0:17:17 31346 10.6% 125.47643 ** INFO : 160d 2:00:00 1300d 22:00:00 0d 0:02:08 0d 0:17:20 31222 11.0% 124.13793 ** INFO : 166d 8:00:00 1294d 16:00:00 0d 0:02:13 0d 0:17:16 31072 11.4% 124.13793 ** INFO : 171d 22:00:00 1289d 2:00:00 0d 0:02:18 0d 0:17:15 30938 11.8% 124.13793 ** INFO : 177d 20:00:00 1283d 4:00:00 0d 0:02:23 0d 0:17:12 30796 12.2% 124.13793 ** INFO : 184d 7:00:00 1276d 17:00:00 0d 0:02:28 0d 0:17:05 30641 12.6% 124.13793 ** INFO : 190d 15:00:00 1270d 9:00:00 0d 0:02:33 0d 0:16:59 30489 13.0% 124.13793 ** INFO : 196d 20:00:00 1264d 4:00:00 0d 0:02:38 0d 0:16:53 30340 13.5% 124.13793 ** DEBUG : Opened NetCDF file 'DFM_OUTPUT_c25_es\c25_es_20140720_000000_rst.nc' as #7. ** DEBUG : Closed NetCDF file 'DFM_OUTPUT_c25_es\c25_es_20140720_000000_rst.nc. ** INFO : 203d 4:00:00 1257d 20:00:00 0d 0:02:43 0d 0:16:47 30188 13.9% 124.13793 ** INFO : 209d 10:00:00 1251d 14:00:00 0d 0:02:48 0d 0:16:42 30038 14.3% 124.13793 ** INFO : 215d 20:00:00 1245d 4:00:00 0d 0:02:53 0d 0:16:36 29884 14.8% 124.13793 ** INFO : 222d 0:00:00 1239d 0:00:00 0d 0:02:58 0d 0:16:31 29736 15.2% 124.13793 ** INFO : 228d 4:00:00 1232d 20:00:00 0d 0:03:02 0d 0:16:26 29588 15.6% 124.13793 ** INFO : 235d 5:00:00 1225d 19:00:00 0d 0:03:07 0d 0:16:16 29419 16.1% 124.13793 ** INFO : 241d 3:00:00 1219d 21:00:00 0d 0:03:12 0d 0:16:13 29277 16.5% 124.13793 ** INFO : 245d 19:00:00 1215d 5:00:00 0d 0:03:17 0d 0:16:15 29165 16.8% 124.13793 ** INFO : 251d 6:00:00 1209d 18:00:00 0d 0:03:22 0d 0:16:13 29034 17.2% 124.13793 ** INFO : 257d 4:00:00 1203d 20:00:00 0d 0:03:27 0d 0:16:09 28892 17.6% 124.13793 ** INFO : 263d 0:00:00 1198d 0:00:00 0d 0:03:32 0d 0:16:06 28752 18.0% 124.13793 ** INFO : 269d 3:00:00 1191d 21:00:00 0d 0:03:37 0d 0:16:01 28605 18.4% 124.13793 ** INFO : 274d 9:00:00 1186d 15:00:00 0d 0:03:42 0d 0:15:59 28479 18.8% 124.13793 ** INFO : 280d 20:00:00 1180d 4:00:00 0d 0:03:47 0d 0:15:53 28324 19.2% 124.13793 ** INFO : 287d 3:00:00 1173d 21:00:00 0d 0:03:52 0d 0:15:47 28173 19.7% 124.13793 ** INFO : 293d 8:00:00 1167d 16:00:00 0d 0:03:57 0d 0:15:42 28024 20.1% 124.13793 ** INFO : 299d 8:00:00 1161d 16:00:00 0d 0:04:01 0d 0:15:37 27880 20.5% 124.13793 ** DEBUG : Opened NetCDF file 'DFM_OUTPUT_c25_es\c25_es_20141028_000000_rst.nc' as #7. ** DEBUG : Closed NetCDF file 'DFM_OUTPUT_c25_es\c25_es_20141028_000000_rst.nc. ** INFO : 305d 2:00:00 1155d 22:00:00 0d 0:04:06 0d 0:15:33 27742 20.9% 124.13793 ** INFO : 311d 3:00:00 1149d 21:00:00 0d 0:04:11 0d 0:15:28 27597 21.3% 127.62836 ** INFO : 316d 11:00:00 1144d 13:00:00 0d 0:04:16 0d 0:15:26 27469 21.7% 128.57143 ** INFO : 322d 17:00:00 1138d 7:00:00 0d 0:04:21 0d 0:15:21 27319 22.1% 128.57143 ** INFO : 329d 12:00:00 1131d 12:00:00 0d 0:04:26 0d 0:15:13 27156 22.6% 128.57143 ** INFO : 336d 6:00:00 1124d 18:00:00 0d 0:04:31 0d 0:15:06 26994 23.0% 128.57143 ** INFO : 341d 21:00:00 1119d 3:00:00 0d 0:04:36 0d 0:15:03 26859 23.4% 128.57143 ** INFO : 347d 21:00:00 1113d 3:00:00 0d 0:04:41 0d 0:14:58 26715 23.8% 128.57143 ** INFO : 354d 7:00:00 1106d 17:00:00 0d 0:04:46 0d 0:14:52 26561 24.2% 128.57143 ** INFO : 360d 3:00:00 1100d 21:00:00 0d 0:04:51 0d 0:14:49 26421 24.6% 128.57143 ** INFO : 366d 22:00:00 1094d 2:00:00 0d 0:04:56 0d 0:14:42 26258 25.1% 128.57143 ** INFO : 372d 22:00:00 1088d 2:00:00 0d 0:05:01 0d 0:14:37 26114 25.5% 128.57143 ** INFO : 379d 1:00:00 1081d 23:00:00 0d 0:05:06 0d 0:14:35 25967 25.9% 128.57143 ** INFO : 384d 19:00:00 1076d 5:00:00 0d 0:05:12 0d 0:14:32 25829 26.3% 128.57143 ** INFO : 389d 21:00:00 1071d 3:00:00 0d 0:05:17 0d 0:14:30 25707 26.7% 128.57143 ** INFO : 396d 13:00:00 1064d 11:00:00 0d 0:05:22 0d 0:14:23 25547 27.1% 128.57143 ** DEBUG : Opened NetCDF file 'DFM_OUTPUT_c25_es\c25_es_20150205_000000_rst.nc' as #7. ** DEBUG : Closed NetCDF file 'DFM_OUTPUT_c25_es\c25_es_20150205_000000_rst.nc. ** INFO : 401d 8:00:00 1059d 16:00:00 0d 0:05:27 0d 0:14:22 25432 27.5% 128.57143 ** INFO : 405d 17:00:00 1055d 7:00:00 0d 0:05:32 0d 0:14:22 25327 27.8% 128.57143 ** INFO : 411d 22:00:00 1049d 2:00:00 0d 0:05:36 0d 0:14:17 25178 28.2% 128.57143 ** INFO : 418d 15:00:00 1042d 9:00:00 0d 0:05:41 0d 0:14:10 25017 28.7% 128.57143 ** INFO : 424d 10:00:00 1036d 14:00:00 0d 0:05:46 0d 0:14:06 24878 29.0% 128.57143 ** INFO : 435d 23:00:00 1025d 1:00:00 0d 0:05:51 0d 0:13:45 24601 29.8% 128.57143 ** INFO : 442d 2:00:00 1018d 22:00:00 0d 0:05:56 0d 0:13:40 24454 30.3% 128.57143 ** INFO : 455d 13:00:00 1005d 11:00:00 0d 0:06:01 0d 0:13:16 24131 31.2% 128.57143 ** INFO : 469d 5:00:00 991d 19:00:00 0d 0:06:06 0d 0:12:53 23803 32.1% 128.57143 ** INFO : 482d 20:00:00 978d 4:00:00 0d 0:06:10 0d 0:12:30 23476 33.0% 128.57143 ** INFO : 494d 4:00:00 966d 20:00:00 0d 0:06:15 0d 0:12:14 23204 33.8% 128.57143 ** DEBUG : Opened NetCDF file 'DFM_OUTPUT_c25_es\c25_es_20150516_000000_rst.nc' as #7. ** DEBUG : Closed NetCDF file 'DFM_OUTPUT_c25_es\c25_es_20150516_000000_rst.nc. ** INFO : 505d 22:00:00 955d 2:00:00 0d 0:06:51 0d 0:12:56 22922 34.6% 128.57143 ** INFO : 505d 23:00:00 955d 1:00:00 0d 0:07:16 0d 0:13:44 22921 34.6% 128.57143 ** INFO : 506d 0:00:00 955d 0:00:00 0d 0:07:16 0d 0:13:44 22920 34.6% 128.57143 ** INFO : 517d 16:00:00 943d 8:00:00 0d 0:07:21 0d 0:13:24 22640 35.4% 128.57143 ** INFO : 529d 15:00:00 931d 9:00:00 0d 0:07:26 0d 0:13:04 22353 36.3% 128.57143 ** INFO : 541d 13:00:00 919d 11:00:00 0d 0:07:31 0d 0:12:45 22067 37.1% 128.57143 ** INFO : 553d 12:00:00 907d 12:00:00 0d 0:07:36 0d 0:12:27 21780 37.9% 128.57143 ** INFO : 565d 10:00:00 895d 14:00:00 0d 0:07:40 0d 0:12:09 21494 38.7% 128.57143 ** INFO : 577d 14:00:00 883d 10:00:00 0d 0:07:45 0d 0:11:52 21202 39.5% 128.57143 ** INFO : 591d 10:00:00 869d 14:00:00 0d 0:07:50 0d 0:11:31 20870 40.5% 128.57143 ** DEBUG : Opened NetCDF file 'DFM_OUTPUT_c25_es\c25_es_20150824_000000_rst.nc' as #7. ** DEBUG : Closed NetCDF file 'DFM_OUTPUT_c25_es\c25_es_20150824_000000_rst.nc. ** INFO : 605d 8:00:00 855d 16:00:00 0d 0:07:55 0d 0:11:11 20536 41.4% 128.57143 ** INFO : 618d 11:00:00 842d 13:00:00 0d 0:08:00 0d 0:10:53 20221 42.3% 128.57143 ** INFO : 631d 15:00:00 829d 9:00:00 0d 0:08:04 0d 0:10:36 19905 43.2% 128.57143 ** INFO : 651d 19:00:00 809d 5:00:00 0d 0:08:09 0d 0:10:07 19421 44.6% 128.57143 ** INFO : 674d 7:00:00 786d 17:00:00 0d 0:08:14 0d 0:09:36 18881 46.2% 128.57143 ** INFO : 695d 11:00:00 765d 13:00:00 0d 0:08:19 0d 0:09:09 18373 47.6% 128.57143 ** DEBUG : Opened NetCDF file 'DFM_OUTPUT_c25_es\c25_es_20151202_000000_rst.nc' as #7. ** DEBUG : Closed NetCDF file 'DFM_OUTPUT_c25_es\c25_es_20151202_000000_rst.nc. ** INFO : 718d 2:00:00 742d 22:00:00 0d 0:08:23 0d 0:08:41 17830 49.2% 128.57143 ** INFO : 740d 21:00:00 720d 3:00:00 0d 0:08:28 0d 0:08:14 17283 50.7% 128.57143 ** INFO : 763d 16:00:00 697d 8:00:00 0d 0:08:33 0d 0:07:48 16736 52.3% 128.57143 ** INFO : 786d 13:00:00 674d 11:00:00 0d 0:08:37 0d 0:07:24 16187 53.8% 128.57143 ** DEBUG : Opened NetCDF file 'DFM_OUTPUT_c25_es\c25_es_20160311_000000_rst.nc' as #7. ** DEBUG : Closed NetCDF file 'DFM_OUTPUT_c25_es\c25_es_20160311_000000_rst.nc. ** INFO : 809d 7:00:00 651d 17:00:00 0d 0:08:42 0d 0:07:00 15641 55.4% 128.57143 ** INFO : 832d 1:00:00 628d 23:00:00 0d 0:08:47 0d 0:06:38 15095 57.0% 128.57143 ** INFO : 854d 19:00:00 606d 5:00:00 0d 0:08:51 0d 0:06:17 14549 58.5% 128.57143 ** INFO : 877d 16:00:00 583d 8:00:00 0d 0:08:56 0d 0:05:56 14000 60.1% 128.57143 ** DEBUG : Opened NetCDF file 'DFM_OUTPUT_c25_es\c25_es_20160619_000000_rst.nc' as #7. ** DEBUG : Closed NetCDF file 'DFM_OUTPUT_c25_es\c25_es_20160619_000000_rst.nc. ** INFO : 900d 4:00:00 560d 20:00:00 0d 0:09:01 0d 0:05:37 13460 61.6% 128.57143 ** INFO : 922d 19:00:00 538d 5:00:00 0d 0:09:05 0d 0:05:18 12917 63.2% 128.57143 ** INFO : 945d 15:00:00 515d 9:00:00 0d 0:09:10 0d 0:05:00 12369 64.7% 128.57143 ** INFO : 966d 21:00:00 494d 3:00:00 0d 0:09:15 0d 0:04:44 11859 66.2% 128.57143 ** INFO : 989d 16:00:00 471d 8:00:00 0d 0:09:20 0d 0:04:27 11312 67.7% 128.57143 ** DEBUG : Opened NetCDF file 'DFM_OUTPUT_c25_es\c25_es_20160927_000000_rst.nc' as #7. ** DEBUG : Closed NetCDF file 'DFM_OUTPUT_c25_es\c25_es_20160927_000000_rst.nc. ** INFO : 1011d 13:00:00 449d 11:00:00 0d 0:09:24 0d 0:04:11 10787 69.2% 128.57143 ** INFO : 1034d 5:00:00 426d 19:00:00 0d 0:09:29 0d 0:03:55 10243 70.8% 128.57143 ** INFO : 1054d 10:00:00 406d 14:00:00 0d 0:09:34 0d 0:03:41 9758 72.2% 128.57143 ** INFO : 1076d 7:00:00 384d 17:00:00 0d 0:09:38 0d 0:03:27 9233 73.7% 128.57143 ** INFO : 1098d 17:00:00 362d 7:00:00 0d 0:09:43 0d 0:03:12 8695 75.2% 128.57143 ** DEBUG : Opened NetCDF file 'DFM_OUTPUT_c25_es\c25_es_20170105_000000_rst.nc' as #7. ** DEBUG : Closed NetCDF file 'DFM_OUTPUT_c25_es\c25_es_20170105_000000_rst.nc. ** INFO : 1121d 5:00:00 339d 19:00:00 0d 0:09:48 0d 0:02:58 8155 76.7% 128.57143 ** INFO : 1143d 10:00:00 317d 14:00:00 0d 0:09:52 0d 0:02:45 7622 78.3% 128.57143 ** INFO : 1160d 4:00:00 300d 20:00:00 0d 0:09:57 0d 0:02:35 7220 79.4% 128.57143 ** INFO : 1182d 11:00:00 278d 13:00:00 0d 0:10:02 0d 0:02:22 6685 80.9% 128.57143 ** DEBUG : Opened NetCDF file 'DFM_OUTPUT_c25_es\c25_es_20170415_000000_rst.nc' as #7. ** DEBUG : Closed NetCDF file 'DFM_OUTPUT_c25_es\c25_es_20170415_000000_rst.nc. ** INFO : 1205d 2:00:00 255d 22:00:00 0d 0:10:06 0d 0:02:09 6142 82.5% 128.57143 ** INFO : 1226d 14:00:00 234d 10:00:00 0d 0:10:11 0d 0:01:57 5626 84.0% 128.57143 ** INFO : 1249d 6:00:00 211d 18:00:00 0d 0:10:16 0d 0:01:44 5082 85.5% 128.57143 ** INFO : 1272d 0:00:00 189d 0:00:00 0d 0:10:21 0d 0:01:32 4536 87.1% 128.57143 ** INFO : 1294d 15:00:00 166d 9:00:00 0d 0:10:25 0d 0:01:20 3993 88.6% 128.57143 ** DEBUG : Opened NetCDF file 'DFM_OUTPUT_c25_es\c25_es_20170724_000000_rst.nc' as #7. ** DEBUG : Closed NetCDF file 'DFM_OUTPUT_c25_es\c25_es_20170724_000000_rst.nc. ** INFO : 1317d 12:00:00 143d 12:00:00 0d 0:10:30 0d 0:01:09 3444 90.2% 128.57143 ** INFO : 1339d 12:00:00 121d 12:00:00 0d 0:10:35 0d 0:00:58 2916 91.7% 128.57143 ** INFO : 1361d 15:00:00 99d 9:00:00 0d 0:10:39 0d 0:00:47 2385 93.2% 128.57143 ** INFO : 1384d 11:00:00 76d 13:00:00 0d 0:10:44 0d 0:00:36 1837 94.8% 128.57143 ** DEBUG : Opened NetCDF file 'DFM_OUTPUT_c25_es\c25_es_20171101_000000_rst.nc' as #7. ** DEBUG : Closed NetCDF file 'DFM_OUTPUT_c25_es\c25_es_20171101_000000_rst.nc. ** INFO : 1407d 3:00:00 53d 21:00:00 0d 0:10:49 0d 0:00:25 1293 96.3% 128.57143 ** INFO : 1422d 12:00:00 38d 12:00:00 0d 0:10:53 0d 0:00:18 924 97.4% 128.57143 ** INFO : 1445d 8:00:00 15d 16:00:00 0d 0:10:58 0d 0:00:07 376 98.9% 128.57143 ** DEBUG : Opened NetCDF file 'DFM_OUTPUT_c25_es\c25_es_20180101_000000_rst.nc' as #7. ** DEBUG : Closed NetCDF file 'DFM_OUTPUT_c25_es\c25_es_20180101_000000_rst.nc. ** INFO : ** INFO : ** INFO : ** INFO : nr of netnodes ( ) : 62 ** INFO : nr of netlinks ( ) : 61 ** INFO : nr of flownodes ( ) : 61 ** INFO : nr of openbnd cells ( ) : 2 ** INFO : nr of 1D-flownodes ( ) : 58 ** INFO : model area (m2) : 0.2307649028E+07 ** INFO : model volume (m3) : 0.1076232886E+08 ** INFO : ** INFO : ** INFO : ** INFO : nr of timesteps ( ) : 984919.0000000000 ** INFO : average timestep (s) : 128.1632296666 ** INFO : ** INFO : ** INFO : simulation period (d) : 1461.0000000000 ** INFO : total computation time (d) : 0.0079179167 ** INFO : time modelinit (d) : 0.0000021759 ** INFO : time steps (+ plots) (d) : 0.0079157407 ** INFO : ** INFO : simulation period (h) : 35064.0000000000 ** INFO : total computation time (h) : 0.1900300000 ** INFO : time modelinit (h) : 0.0000522222 ** INFO : time steps (+ plots) (h) : 0.1899777778 ** INFO : ** INFO : simulation period (s) : 126230400.0000000000 ** INFO : total computation time (s) : 684.1080000000 ** INFO : time modelinit (s) : 0.1880000000 ** INFO : time steps (+ plots) (s) : 683.9200000000 ** INFO : ** INFO : ** INFO : time inistep (s) : 171.0190000001 ** INFO : time setumod (s) : 56.7720000000 ** INFO : time furu (s) : 14.3260000001 ** INFO : time solve (s) : 48.6560000001 ** INFO : time setexternalforc. (s) : 1.1890000000 ** INFO : time setexternalfbnd. (s) : 8.0130000000 ** INFO : time steps (s) : 661.2710000002 ** INFO : fraction solve/steps ( ) : 0.0735795158 ** INFO : total/(dnt*ndx) (s) : 0.0000113835 ** INFO : av nr of cont. it s1it ( ) : 1.8726394022 ** INFO : time transport [s] : 18.6200000001 ** INFO : time debug [s] : 0.0000000000 ** INFO : ** INFO : ** INFO : ** INFO : Computation started at: 10:33:31, 19-06-2018 ** INFO : Computation finished at: 10:44:55, 19-06-2018 ** INFO : ** INFO : simulation period (h) : 35064.0000000000 ** INFO : total time in timeloop (h) : 0.1899777778 ** INFO : MPI : no. ** INFO : OpenMP : yes. #threads max : 4 ** INFO : ** INFO : ** INFO : ** INFO :