Configfile:dimr_config.xml Working directory: d:\temporal\221026_plugin_trial executing: "c:\Users\chavarri\checkouts\delft3d_trunk\build_all\x64\Release\dimr\scripts\..\..\..\Release\dimr\bin\dimr.exe" -d 0 dimr_config.xml Dimr [2022-10-26 15:22:13.658] #0 >> Deltares, DIMR_EXE Version 2.00.00.141394M, Aug 30 2022, 07:35:49 Dimr [2022-10-26 15:22:13.659] #0 >> Loading dimr library "dimr_dll.dll" Dimr [2022-10-26 15:22:13.664] #0 >> dimr_dll.dll.SetVar(redirectFile,stdout/stderr) Dimr [2022-10-26 15:22:13.664] #0 >> dimr_lib:set_var Dimr [2022-10-26 15:22:13.664] #0 >> dimr_dll.dll.SetVar(useMPI,0) Dimr [2022-10-26 15:22:13.664] #0 >> dimr_lib:set_var Dimr [2022-10-26 15:22:13.664] #0 >> dimr_dll.dll.SetVar(numRanks,1) Dimr [2022-10-26 15:22:13.664] #0 >> dimr_lib:set_var Dimr [2022-10-26 15:22:13.664] #0 >> dimr_dll.dll.SetVar(myRank,0) Dimr [2022-10-26 15:22:13.664] #0 >> dimr_lib:set_var Dimr [2022-10-26 15:22:13.664] #0 >> dimr_dll.dll.SetVar(debugLevel,0) Dimr [2022-10-26 15:22:13.664] #0 >> dimr_lib:set_var Dimr [2022-10-26 15:22:13.664] #0 >> Log level set to ALL Dimr [2022-10-26 15:22:13.664] #0 >> dimr_lib:set_var Dimr [2022-10-26 15:22:13.664] #0 >> feedbackLevel set to ALL Dimr [2022-10-26 15:22:13.664] #0 >> dimr_dll.dll.Initialize(dimr_config.xml) Dimr [2022-10-26 15:22:13.664] #0 >> Deltares, DIMR_LIB Version 1.02.00.141394M, Aug 30 2022, 07:35:14 Dimr [2022-10-26 15:22:13.664] #0 >> dimr_dll:initialize(dimr_config.xml) Dimr [2022-10-26 15:22:13.664] #0 >> Build controlBlock administration by scanning the XmlTree Dimr [2022-10-26 15:22:13.664] #0 >> INFO: "" not specified for component "myNameDFlowFM". Assuming it only runs on rank #0. Dimr [2022-10-26 15:22:13.664] #0 >> Loading library "dflowfm.dll" Dimr [2022-10-26 15:22:13.693] #0 >> Dimr [2022-10-26 15:22:13.693] #0 >> Version Information of Components Dimr [2022-10-26 15:22:13.693] #0 >> ================================= Dimr [2022-10-26 15:22:13.693] #0 >> dflowfm : 1.2.154.141394M Dimr [2022-10-26 15:22:13.693] #0 >> --------------------------------- Dimr [2022-10-26 15:22:13.693] #0 >> Dimr [2022-10-26 15:22:13.693] #0 >> myNameDFlowFM.Initialize(struiksma83.mdu) ** DEBUG : 0 0.1000010 NOD(KMAX) ** DEBUG : 6 0.7000070 XK (KMAX), YK (KMAX), ZK (KMAX), KC (KMAX), NMK (KMAX), RNOD(KMAX) loading model ** WARNING: While reading 'struiksma83.mdu': keyword [geometry] grdang=0 was in file, but not used. Check possible typo. Dimr [2022-10-26 15:22:13.715] #0 >> kernel: While reading 'struiksma83.mdu': keyword [geometry] grdang=0 was in file, but not used. Check possible typo. ** WARNING: While reading 'struiksma83.mdu': keyword [numerics] transportmethod=1 was in file, but not used. Check possible typo. Dimr [2022-10-26 15:22:13.715] #0 >> kernel: While reading 'struiksma83.mdu': keyword [numerics] transportmethod=1 was in file, but not used. Check possible typo. ** WARNING: While reading 'struiksma83.mdu': keyword [numerics] qhrelax=0.01 was in file, but not used. Check possible typo. Dimr [2022-10-26 15:22:13.715] #0 >> kernel: While reading 'struiksma83.mdu': keyword [numerics] qhrelax=0.01 was in file, but not used. Check possible typo. ** WARNING: While reading 'struiksma83.mdu': keyword [numerics] jaorgsethu=1 was in file, but not used. Check possible typo. Dimr [2022-10-26 15:22:13.715] #0 >> kernel: While reading 'struiksma83.mdu': keyword [numerics] jaorgsethu=1 was in file, but not used. Check possible typo. ** WARNING: While reading 'struiksma83.mdu': keyword [physics] effectspiral=1 was in file, but not used. Check possible typo. Dimr [2022-10-26 15:22:13.715] #0 >> kernel: While reading 'struiksma83.mdu': keyword [physics] effectspiral=1 was in file, but not used. Check possible typo. ** WARNING: While reading 'struiksma83.mdu': keyword [output] wrishp_enc=0 was in file, but not used. Check possible typo. Dimr [2022-10-26 15:22:13.715] #0 >> kernel: While reading 'struiksma83.mdu': keyword [output] wrishp_enc=0 was in file, but not used. Check possible typo. ** WARNING: While reading 'struiksma83.mdu': keyword [output] waterlevelclasses=0.0 was in file, but not used. Check possible typo. Dimr [2022-10-26 15:22:13.715] #0 >> kernel: While reading 'struiksma83.mdu': keyword [output] waterlevelclasses=0.0 was in file, but not used. Check possible typo. ** WARNING: While reading 'struiksma83.mdu': keyword [output] waterdepthclasses=0.0 was in file, but not used. Check possible typo. Dimr [2022-10-26 15:22:13.715] #0 >> kernel: While reading 'struiksma83.mdu': keyword [output] waterdepthclasses=0.0 was in file, but not used. Check possible typo. ** INFO : Network UGRID-File: No 1D-Mesh Present, Skipped 1D ug_get_meshgeom, #12, ierr=0 ** INFO : Opened file : obs.xyn ** INFO : Closed file : obs.xyn model loaded Initializing flow: flow_modelinit ** INFO : Initializing flow model geometry... ** INFO : Opened file : fini.ext ** INFO : Opened file : Upstream_01.pli ** INFO : Closed file : Upstream_01.pli ** INFO : boundary: 'Upstream_01.pli' opened 1 cells. ** INFO : dischargebnd Upstream_01.pli 1 nr of open bndcells ** INFO : Opened file : Upstream_02.pli ** INFO : Closed file : Upstream_02.pli ** INFO : boundary: 'Upstream_02.pli' opened 1 cells. ** INFO : dischargebnd Upstream_02.pli 1 nr of open bndcells ** INFO : Opened file : Upstream_03.pli ** INFO : Closed file : Upstream_03.pli ** INFO : boundary: 'Upstream_03.pli' opened 1 cells. ** INFO : dischargebnd Upstream_03.pli 1 nr of open bndcells ** INFO : Opened file : Upstream_04.pli ** INFO : Closed file : Upstream_04.pli ** INFO : boundary: 'Upstream_04.pli' opened 1 cells. ** INFO : dischargebnd Upstream_04.pli 1 nr of open bndcells ** INFO : Opened file : Upstream_05.pli ** INFO : Closed file : Upstream_05.pli ** INFO : boundary: 'Upstream_05.pli' opened 1 cells. ** INFO : dischargebnd Upstream_05.pli 1 nr of open bndcells ** INFO : Opened file : Upstream_06.pli ** INFO : Closed file : Upstream_06.pli ** INFO : boundary: 'Upstream_06.pli' opened 1 cells. ** INFO : dischargebnd Upstream_06.pli 1 nr of open bndcells ** INFO : Opened file : Upstream_07.pli ** INFO : Closed file : Upstream_07.pli ** INFO : boundary: 'Upstream_07.pli' opened 1 cells. ** INFO : dischargebnd Upstream_07.pli 1 nr of open bndcells ** INFO : Opened file : Upstream_08.pli ** INFO : Closed file : Upstream_08.pli ** INFO : boundary: 'Upstream_08.pli' opened 1 cells. ** INFO : dischargebnd Upstream_08.pli 1 nr of open bndcells ** INFO : Opened file : Upstream_09.pli ** INFO : Closed file : Upstream_09.pli ** INFO : boundary: 'Upstream_09.pli' opened 1 cells. ** INFO : dischargebnd Upstream_09.pli 1 nr of open bndcells ** INFO : Opened file : Upstream_10.pli ** INFO : Closed file : Upstream_10.pli ** INFO : boundary: 'Upstream_10.pli' opened 1 cells. ** INFO : dischargebnd Upstream_10.pli 1 nr of open bndcells ** INFO : Opened file : Downstream.pli ** INFO : Closed file : Downstream.pli ** INFO : boundary: 'Downstream.pli' opened 10 cells. ** INFO : waterlevelbnd Downstream.pli 10 nr of open bndcells ** INFO : setbedlevelfromextfile: Using bedlevel as specified in net-file. ** INFO : setbedlevelfromextfile: Setting both 1D and 2D bedlevel from file 'dep.xyz'. ** INFO : Opened file : dep.xyz ** INFO : merged 0 samples in .01 seconds. ** INFO : Closed file : dep.xyz ** INFO : setbedlevelfromextfile: Mirroring input bedlevels at open boundaries. ** INFO : Done initializing flow model geometry. ** WARNING: No Nodal Point Relations Specified, Set to (Default) Proportional. Dimr [2022-10-26 15:22:13.916] #0 >> kernel: No Nodal Point Relations Specified, Set to (Default) Proportional. ** WARNING: Exponent of Discharge Ratio Set to Default: k = 1 Dimr [2022-10-26 15:22:13.916] #0 >> kernel: Exponent of Discharge Ratio Set to Default: k = 1 ** WARNING: Exponent of Width Ratio Set to Default : m = 0 Dimr [2022-10-26 15:22:13.916] #0 >> kernel: Exponent of Width Ratio Set to Default : m = 0 ** INFO : List of constituents defined in the model ** INFO : 1 secondary_flow_intensity ** INFO : Finding flow nodes... ** INFO : done in 0.00000 sec. ** INFO : Start initializing external forcings... ** INFO : External Forcing or Initialising 'bedlevel' from file 'dep.xyz'. ** INFO : Closed file : fini.ext ** INFO : Done initializing external forcings. ** INFO : nogauss , nocg : 653 557 ** INFO : Finding flow nodes... ** INFO : done in 0.00000 sec. ** INFO : ** Model initialization was successful ** ** INFO : * Active Model definition: ** INFO : ** ** INFO : Modelinit finished at: 15:22:13, 26-10-2022 ** INFO : ** INFO : ** INFO : nr of netnodes ( ) : 1320 ** INFO : nr of netlinks ( ) : 2509 ** INFO : ** INFO : nr of 2D netlinks ( ) : 2509 ** INFO : nr of 1D netlinks ( ) : 0 ** INFO : ** INFO : nr of netcells ( ) : 1190 ** INFO : nr of netcells 1D2D ( ) : 1190 ** INFO : ** INFO : nr of flownodes ( ) : 1210 ** INFO : nr of internal flownodes ( ) : 1190 ** INFO : nr of 2D internal flownodes ( ) : 1190 ** INFO : nr of 1D internal flownodes ( ) : 0 ** INFO : ** INFO : nr of openbnd cells ( ) : 20 ** INFO : nr of 2D boundaries ( ) : 20 ** INFO : nr of 1D boundaries ( ) : 0 ** INFO : nr of flowlinks ( ) : 2271 ** INFO : nr of internal links ( ) : 2251 ** INFO : nr of 1D links ( ) : 0 ** INFO : ** INFO : nr of closed walls ( ) : 238 ** INFO : ** INFO : ** INFO : my model area (m2) : 0.7097408480E+02 ** INFO : my model volume (m3) : 0.4769391367E+01 ** INFO : ** INFO : ** INFO : Writing initial output to file(s)... ** INFO : Done writing initial output to file(s). Dimr [2022-10-26 15:22:14.020] #0 >> dimr_lib:get_start_time Dimr [2022-10-26 15:22:14.020] #0 >> dimr_lib:get_end_time Dimr [2022-10-26 15:22:14.020] #0 >> dimr_lib:get_time_step Dimr [2022-10-26 15:22:14.020] #0 >> dimr_lib:get_current_time Dimr [2022-10-26 15:22:14.020] #0 >> DimrExe::lib_initialize:tStart : 0.0000000000 Dimr [2022-10-26 15:22:14.020] #0 >> DimrExe::lib_initialize:tCurrent: 0.0000000000 Dimr [2022-10-26 15:22:14.020] #0 >> DimrExe::lib_initialize:tStep : 72.0000000000 Dimr [2022-10-26 15:22:14.020] #0 >> DimrExe::lib_initialize:tEnd : 10152.0000000000 Dimr [2022-10-26 15:22:14.020] #0 >> dimr_lib:get_start_time Dimr [2022-10-26 15:22:14.020] #0 >> dimr_lib:get_end_time Dimr [2022-10-26 15:22:14.020] #0 >> dimr_lib:update Dimr [2022-10-26 15:22:14.020] #0 >> myNameDFlowFM.Update(10152.0) Dimr [2022-10-26 15:22:57.449] #0 >> dimr_dll.dll.Finalize() Dimr [2022-10-26 15:22:57.449] #0 >> dimr_lib:finalize Dimr [2022-10-26 15:22:57.450] #0 >> myNameDFlowFM.Finalize() ** INFO : ** INFO : ** INFO : ** INFO : extra timer:Flow geometry 0.0820000172 ** INFO : extra timer:Sedimentation Morphology init 0.0120000839 ** INFO : extra timer:Flow init 0.0209999084 ** INFO : extra timer:MDU file pointer 0.0220000744 ** INFO : extra timer:Set boundaries 0.6270000935 ** INFO : extra timer:Sethuau 0.8769965172 ** INFO : extra timer:setdt 0.3989956379 ** INFO : extra timer:Compute advection term 3.4370110035 ** INFO : extra timer:u0u1 0.0430009365 ** INFO : extra timer:Setumod 3.4120020866 ** INFO : extra timer:Set conveyance 0.1659994125 ** INFO : extra timer:Set structures actual parameters 0.0280005932 ** INFO : extra timer:Set bedlevel from ext-file 0.0669999123 ** INFO : extra timer:step_reduce 33.1129953861 ** INFO : extra timer:Transport 5.1409988403 ** INFO : extra timer:Output 0.8679995537 ** INFO : extra timer:unc_write_his 0.0360004902 ** INFO : extra timer:unc_write_his INIT/DEF 0.0109999180 ** INFO : extra timer:unc_write_flowgeom_filepointer_ugrid 0.0190000534 ** INFO : extra timer:unc_write_map_filepointer_ugrid 0.8709990978 ** INFO : extra timer:unc_write_flowgeom_filepointer_ugrid INI 0.0309998989 ** INFO : extra timer:unc_write_map_filepointer_ugrid TIME wri 0.6979978085 ** INFO : extra timer:unc_write_map_filepointer_ugrid vars 0.1420013905 ** INFO : extra timer:call wrimap 0.8749990463 ** INFO : extra timer:call flow_externaloutput 0.8659994602 ** INFO : ** INFO : ** INFO : ** INFO : nr of timesteps ( ) : 15609.0000000000 ** INFO : average timestep (s) : 0.6503523382 ** INFO : nr of setbacks ( ) : 0.0000000000 ** INFO : ** INFO : ** INFO : simulation period (d) : 0.1175000000 ** INFO : total computation time (d) : 0.0005062384 ** INFO : time modelinit (d) : 0.0000035764 ** INFO : time steps (+ plots) (d) : 0.0005026620 ** INFO : ** INFO : simulation period (h) : 2.8200000000 ** INFO : total computation time (h) : 0.0121497222 ** INFO : time modelinit (h) : 0.0000858333 ** INFO : time steps (+ plots) (h) : 0.0120638889 ** INFO : ** INFO : simulation period (s) : 10152.0000000000 ** INFO : total computation time (s) : 43.7390000820 ** INFO : time modelinit (s) : 0.3090000153 ** INFO : time steps (+ plots) (s) : 43.4300000668 ** INFO : ** INFO : ** INFO : time iniexternalforc. (s) : 0.0080001354 ** INFO : ** INFO : time inistep (s) : 9.1830070019 ** INFO : time setumod (s) : 3.3660027981 ** INFO : time furu (s) : 0.4529988766 ** INFO : time solve (s) : 4.3739976883 ** INFO : time gausselimination (s) : 0.4010000000 ** INFO : time gausssubstitution (s) : 0.1320000000 ** INFO : time totalsolve (s) : 4.4240000002 ** INFO : time setexternalforc. (s) : 0.0000000000 ** INFO : time setexternalfbnd. (s) : 0.5899994373 ** INFO : time steps (s) : 42.5340013504 ** INFO : fraction solve/steps ( ) : 0.1028353211 ** INFO : total/(dnt*ndx) (s) : 0.0000023158 ** INFO : av nr of cont. it s1it ( ) : 0.0000000000 ** INFO : time transport [s] : 5.2270000001 ** INFO : time debug [s] : 0.2410000000 ** INFO : ** INFO : ** INFO : ** INFO : Computation started at: 15:22:13, 26-10-2022 ** INFO : Computation finished at: 15:22:57, 26-10-2022 ** INFO : ** INFO : simulation period (h) : 2.8200000000 ** INFO : total time in timeloop (h) : 0.0120638889 ** INFO : MPI : no. ** INFO : OpenMP : yes. #threads max : 2 ** INFO : ** INFO : ** INFO : ** INFO : Opened file : DFM_OUTPUT_struiksma83\struiksma83_numlimdt.xyz ** INFO : Closed file : DFM_OUTPUT_struiksma83\struiksma83_numlimdt.xyz ** INFO : Dimr [2022-10-26 15:22:57.453] #0 >> TIMER INFO: Dimr [2022-10-26 15:22:57.453] #0 >> myNameDFlowFM : 43.999759 sec Dimr [2022-10-26 15:22:57.453] #0 >> DIMR_LIB : 43.999789 sec Dimr [2022-10-26 15:22:57.453] #0 >> DIMR_EXE : 43.999795 sec Dimr [2022-10-26 15:22:57.453] #0 >> Freeing library "dimr_dll.dll" Dimr [2022-10-26 15:22:57.453] #0 >> dimr shutting down normally