Configfile:dimr_config.xml OMP_NUM_THREADS is 2 Working directory: C:\Users\chavarri\temporal\210414_struiksma83\01_simulations\r007 executing: "C:\Users\chavarri\checkouts\dimrset_2.15.13\x64\dimr\scripts\..\..\..\x64\dimr\bin\dimr.exe" -d 0 dimr_config.xml Dimr [2021-04-15 10:16:55.166] #0 >> Deltares, DIMR_EXE Version 2.00.00.68433M, Feb 24 2021, 11:34:39 Dimr [2021-04-15 10:16:55.167] #0 >> Loading dimr library "dimr_dll.dll" Dimr [2021-04-15 10:16:55.173] #0 >> dimr_dll.dll.SetVar(redirectFile,stdout/stderr) Dimr [2021-04-15 10:16:55.173] #0 >> dimr_lib:set_var Dimr [2021-04-15 10:16:55.173] #0 >> dimr_dll.dll.SetVar(useMPI,0) Dimr [2021-04-15 10:16:55.173] #0 >> dimr_lib:set_var Dimr [2021-04-15 10:16:55.173] #0 >> dimr_dll.dll.SetVar(numRanks,1) Dimr [2021-04-15 10:16:55.173] #0 >> dimr_lib:set_var Dimr [2021-04-15 10:16:55.173] #0 >> dimr_dll.dll.SetVar(myRank,0) Dimr [2021-04-15 10:16:55.173] #0 >> dimr_lib:set_var Dimr [2021-04-15 10:16:55.173] #0 >> dimr_dll.dll.SetVar(debugLevel,0) Dimr [2021-04-15 10:16:55.173] #0 >> dimr_lib:set_var Dimr [2021-04-15 10:16:55.173] #0 >> Log level set to ALL Dimr [2021-04-15 10:16:55.173] #0 >> dimr_lib:set_var Dimr [2021-04-15 10:16:55.173] #0 >> feedbackLevel set to ALL Dimr [2021-04-15 10:16:55.173] #0 >> dimr_dll.dll.Initialize(dimr_config.xml) Dimr [2021-04-15 10:16:55.173] #0 >> Deltares, DIMR_LIB Version 1.02.00.68433M, Feb 24 2021, 11:28:38 Dimr [2021-04-15 10:16:55.173] #0 >> dimr_dll:initialize(dimr_config.xml) Dimr [2021-04-15 10:16:55.173] #0 >> Build controlBlock administration by scanning the XmlTree Dimr [2021-04-15 10:16:55.173] #0 >> INFO: "" not specified for component "myNameDFlowFM". Assuming it only runs on rank #0. Dimr [2021-04-15 10:16:55.174] #0 >> Loading library "dflowfm.dll" Dimr [2021-04-15 10:16:55.195] #0 >> Dimr [2021-04-15 10:16:55.195] #0 >> Version Information of Components Dimr [2021-04-15 10:16:55.195] #0 >> ================================= Dimr [2021-04-15 10:16:55.196] #0 >> dflowfm : 1.2.110.68433M Dimr [2021-04-15 10:16:55.196] #0 >> --------------------------------- Dimr [2021-04-15 10:16:55.196] #0 >> Dimr [2021-04-15 10:16:55.196] #0 >> myNameDFlowFM.Initialize(struiksma83.mdu) ** DEBUG : 0 0.1000010 NOD(KMAX) ** DEBUG : 6 0.7000070 XK (KMAX), YK (KMAX), ZK (KMAX), KC (KMAX), NMK (KMAX), RNOD(KMAX) loading model ** WARNING: readMDUFile: [geometry] grdang=0 was in file, but not used. Check possible typo. Dimr [2021-04-15 10:16:55.279] #0 >> kernel: readMDUFile: [geometry] grdang=0 was in file, but not used. Check possible typo. ** WARNING: readMDUFile: [numerics] jaorgsethu=1 was in file, but not used. Check possible typo. Dimr [2021-04-15 10:16:55.279] #0 >> kernel: readMDUFile: [numerics] jaorgsethu=1 was in file, but not used. Check possible typo. ** WARNING: readMDUFile: [physics] effectspiral=1 was in file, but not used. Check possible typo. Dimr [2021-04-15 10:16:55.280] #0 >> kernel: readMDUFile: [physics] effectspiral=1 was in file, but not used. Check possible typo. ** WARNING: readMDUFile: [output] wrishp_enc=0 was in file, but not used. Check possible typo. Dimr [2021-04-15 10:16:55.280] #0 >> kernel: readMDUFile: [output] wrishp_enc=0 was in file, but not used. Check possible typo. ** WARNING: readMDUFile: [output] waterlevelclasses=0.0 was in file, but not used. Check possible typo. Dimr [2021-04-15 10:16:55.280] #0 >> kernel: readMDUFile: [output] waterlevelclasses=0.0 was in file, but not used. Check possible typo. ** WARNING: readMDUFile: [output] waterdepthclasses=0.0 was in file, but not used. Check possible typo. Dimr [2021-04-15 10:16:55.280] #0 >> kernel: readMDUFile: [output] waterdepthclasses=0.0 was in file, but not used. Check possible typo. ** INFO : Network UGRID-File: No 1D-Mesh Present, Skipped 1D ug_get_meshgeom, #12, ierr=0 ** INFO : Opened file : obs.xyn ** INFO : Closed file : obs.xyn model loaded Initializing flow: flow_modelinit ** INFO : Initializing flow model geometry... ** WARNING: Could not read net cells from NetCDF file 'net.nc' (is not critical). Details follow: Dimr [2021-04-15 10:16:55.287] #0 >> kernel: Could not read net cells from NetCDF file 'net.nc' (is not critical). Details follow: ** INFO : Opened file : Upstream_01.pli ** INFO : Closed file : Upstream_01.pli ** INFO : boundary: 'Upstream_01.pli' opened 1 cells. ** INFO : dischargebnd Upstream_01.pli 1 nr of open bndcells ** INFO : Opened file : Upstream_02.pli ** INFO : Closed file : Upstream_02.pli ** INFO : boundary: 'Upstream_02.pli' opened 1 cells. ** INFO : dischargebnd Upstream_02.pli 1 nr of open bndcells ** INFO : Opened file : Upstream_03.pli ** INFO : Closed file : Upstream_03.pli ** INFO : boundary: 'Upstream_03.pli' opened 1 cells. ** INFO : dischargebnd Upstream_03.pli 1 nr of open bndcells ** INFO : Opened file : Upstream_04.pli ** INFO : Closed file : Upstream_04.pli ** INFO : boundary: 'Upstream_04.pli' opened 1 cells. ** INFO : dischargebnd Upstream_04.pli 1 nr of open bndcells ** INFO : Opened file : Upstream_05.pli ** INFO : Closed file : Upstream_05.pli ** INFO : boundary: 'Upstream_05.pli' opened 1 cells. ** INFO : dischargebnd Upstream_05.pli 1 nr of open bndcells ** INFO : Opened file : Upstream_06.pli ** INFO : Closed file : Upstream_06.pli ** INFO : boundary: 'Upstream_06.pli' opened 1 cells. ** INFO : dischargebnd Upstream_06.pli 1 nr of open bndcells ** INFO : Opened file : Upstream_07.pli ** INFO : Closed file : Upstream_07.pli ** INFO : boundary: 'Upstream_07.pli' opened 1 cells. ** INFO : dischargebnd Upstream_07.pli 1 nr of open bndcells ** INFO : Opened file : Upstream_08.pli ** INFO : Closed file : Upstream_08.pli ** INFO : boundary: 'Upstream_08.pli' opened 1 cells. ** INFO : dischargebnd Upstream_08.pli 1 nr of open bndcells ** INFO : Opened file : Upstream_09.pli ** INFO : Closed file : Upstream_09.pli ** INFO : boundary: 'Upstream_09.pli' opened 1 cells. ** INFO : dischargebnd Upstream_09.pli 1 nr of open bndcells ** INFO : Opened file : Upstream_10.pli ** INFO : Closed file : Upstream_10.pli ** INFO : boundary: 'Upstream_10.pli' opened 1 cells. ** INFO : dischargebnd Upstream_10.pli 1 nr of open bndcells ** INFO : Opened file : Downstream.pli ** INFO : Closed file : Downstream.pli ** INFO : boundary: 'Downstream.pli' opened 10 cells. ** INFO : waterlevelbnd Downstream.pli 10 nr of open bndcells ** INFO : Opened file : dep.xyz ** INFO : merged 0 samples in .01 seconds. ** INFO : Closed file : dep.xyz ** INFO : setbedlevelfromextfile: Setting bedlevel from file 'dep.xyz'. ** INFO : setbedlevelfromextfile: Mirroring input bedlevels at open boundaries. ** INFO : Done initializing flow model geometry. ** WARNING: No Nodal Point Relations Specified, Set to (Default) Proportional. Dimr [2021-04-15 10:16:55.372] #0 >> kernel: No Nodal Point Relations Specified, Set to (Default) Proportional. ** WARNING: Exponent of Discharge Ratio Set to Default: k = 1 Dimr [2021-04-15 10:16:55.373] #0 >> kernel: Exponent of Discharge Ratio Set to Default: k = 1 ** WARNING: Exponent of Width Ratio Set to Default : m = 0 Dimr [2021-04-15 10:16:55.373] #0 >> kernel: Exponent of Width Ratio Set to Default : m = 0 ** INFO : List of constituents defined in the model ** INFO : 1 secondary_flow_intensity ** INFO : Finding flow nodes... ** INFO : done in 0.00100 sec. ** INFO : Start initializing external forcings... ** INFO : Done initializing external forcings. ** INFO : nogauss , nocg : 653 557 ** INFO : Finding flow nodes... ** INFO : done in 0.00000 sec. ** INFO : ** Model initialization was successful ** ** INFO : * Active Model definition: ** INFO : ** ** INFO : Modelinit finished at: 10:16:55, 15-04-2021 ** INFO : ** INFO : ** INFO : nr of netnodes ( ) : 1320 ** INFO : nr of netlinks ( ) : 2509 ** INFO : nr of flownodes ( ) : 1210 ** INFO : nr of openbnd cells ( ) : 20 ** INFO : nr of 1D-flownodes ( ) : 0 ** INFO : nr of flowlinks ( ) : 2271 ** INFO : nr of internal links ( ) : 2251 ** INFO : nr of 1D links ( ) : 0 ** INFO : nr of closed walls ( ) : 238 ** INFO : ** INFO : ** INFO : my model area (m2) : 0.7097408480E+02 ** INFO : my model volume (m3) : 0.4769391367E+01 ** INFO : ** INFO : ** INFO : Writing initial output to file(s)... ** INFO : Done writing initial output to file(s). Dimr [2021-04-15 10:16:55.425] #0 >> dimr_lib:get_start_time Dimr [2021-04-15 10:16:55.425] #0 >> dimr_lib:get_end_time Dimr [2021-04-15 10:16:55.425] #0 >> dimr_lib:get_time_step Dimr [2021-04-15 10:16:55.425] #0 >> dimr_lib:get_current_time Dimr [2021-04-15 10:16:55.425] #0 >> DimrExe::lib_initialize:tStart : 0.0000000000 Dimr [2021-04-15 10:16:55.425] #0 >> DimrExe::lib_initialize:tCurrent: 0.0000000000 Dimr [2021-04-15 10:16:55.425] #0 >> DimrExe::lib_initialize:tStep : 72.0000000000 Dimr [2021-04-15 10:16:55.425] #0 >> DimrExe::lib_initialize:tEnd : 10152.0000000000 Dimr [2021-04-15 10:16:55.425] #0 >> dimr_lib:get_start_time Dimr [2021-04-15 10:16:55.425] #0 >> dimr_lib:get_end_time Dimr [2021-04-15 10:16:55.425] #0 >> dimr_lib:update Dimr [2021-04-15 10:16:55.425] #0 >> myNameDFlowFM.Update(10152.0) Dimr [2021-04-15 10:17:37.763] #0 >> dimr_dll.dll.Finalize() Dimr [2021-04-15 10:17:37.763] #0 >> dimr_lib:finalize Dimr [2021-04-15 10:17:37.763] #0 >> myNameDFlowFM.Finalize() ** INFO : ** INFO : ** INFO : ** INFO : extra timer:Flow geometry 0.0850000381 ** INFO : extra timer:Sedimentation Morphology init 0.0109999180 ** INFO : extra timer:Flow init 0.0209999084 ** INFO : extra timer:Set boundaries 0.6759946346 ** INFO : extra timer:Sethuau 0.8189964294 ** INFO : extra timer:setdt 0.3700025082 ** INFO : extra timer:Compute advection term 3.1519887447 ** INFO : extra timer:u0u1 0.0329990387 ** INFO : extra timer:Setumod 2.9109990597 ** INFO : extra timer:Set conveyance 0.1069993973 ** INFO : extra timer:Set structures actual parameters 0.0230007172 ** INFO : extra timer:Set bedlevel from ext-file 0.0669999123 ** INFO : extra timer:step_reduce 33.5360207558 ** INFO : extra timer:Transport 5.0940034389 ** INFO : extra timer:Output 0.3119990826 ** INFO : ** INFO : ** INFO : ** INFO : nr of timesteps ( ) : 15393.0000000000 ** INFO : average timestep (s) : 0.6594777186 ** INFO : nr of setbacks ( ) : 0.0000000000 ** INFO : ** INFO : ** INFO : simulation period (d) : 0.1175000000 ** INFO : total computation time (d) : 0.0004921065 ** INFO : time modelinit (d) : 0.0000020833 ** INFO : time steps (+ plots) (d) : 0.0004900231 ** INFO : ** INFO : simulation period (h) : 2.8200000000 ** INFO : total computation time (h) : 0.0118105556 ** INFO : time modelinit (h) : 0.0000500000 ** INFO : time steps (+ plots) (h) : 0.0117605556 ** INFO : ** INFO : simulation period (s) : 10152.0000000000 ** INFO : total computation time (s) : 42.5180001259 ** INFO : time modelinit (s) : 0.1800000668 ** INFO : time steps (+ plots) (s) : 42.3380000591 ** INFO : ** INFO : ** INFO : time iniexternalforc. (s) : 0.0119998455 ** INFO : ** INFO : time inistep (s) : 8.2909781933 ** INFO : time setumod (s) : 2.8720006943 ** INFO : time furu (s) : 0.4710006714 ** INFO : time solve (s) : 4.5240087509 ** INFO : time setexternalforc. (s) : 0.0009999275 ** INFO : time setexternalfbnd. (s) : 0.6399943829 ** INFO : time steps (s) : 41.9970004559 ** INFO : fraction solve/steps ( ) : 0.1077221873 ** INFO : total/(dnt*ndx) (s) : 0.0000022828 ** INFO : av nr of cont. it s1it ( ) : 0.0000000000 ** INFO : time transport [s] : 5.1579999999 ** INFO : time debug [s] : 0.1980000000 ** INFO : ** INFO : ** INFO : ** INFO : Computation started at: 10:16:55, 15-04-2021 ** INFO : Computation finished at: 10:17:37, 15-04-2021 ** INFO : ** INFO : simulation period (h) : 2.8200000000 ** INFO : total time in timeloop (h) : 0.0117605556 ** INFO : MPI : no. ** INFO : OpenMP : yes. #threads max : 2 ** INFO : ** INFO : ** INFO : ** INFO : Opened file : DFM_OUTPUT_struiksma83\struiksma83_numlimdt.xyz ** INFO : Closed file : DFM_OUTPUT_struiksma83\struiksma83_numlimdt.xyz ** INFO : Dimr [2021-04-15 10:17:37.768] #0 >> TIMER INFO: Dimr [2021-04-15 10:17:37.768] #0 >> myNameDFlowFM : 42.572 sec Dimr [2021-04-15 10:17:37.768] #0 >> DIMR_LIB : 42.595 sec Dimr [2021-04-15 10:17:37.768] #0 >> DIMR_EXE : 42.602 sec Dimr [2021-04-15 10:17:37.768] #0 >> Freeing library "dimr_dll.dll" Dimr [2021-04-15 10:17:37.768] #0 >> dimr shutting down normally