**********************************************************
                     Welcome to XBeach
 
              version 1.21.3667 Groundhog Day release
              date  02/11/201 15:50:22
    URL: http://svn.oss.deltares.nl/repos/xbeach/trunk/
  **********************************************************
 
  Simulation started: YYYYMMDD    hh:mm:ss     time zone (UTC)
                      20140930  17:50:05     +0200
 
  General Input Module
  Reading input parameters:
  --------------------------------
  Physical processes:
  XBeach reading from params.txt
       swave  = 1 (no record found, default value used)
       lwave  = 1 (no record found, default value used)
        flow  = 1 (no record found, default value used)
    sedtrans  = 1 (no record found, default value used)
  morphology  = 1 (no record found, default value used)
  avalanching = 1 (no record found, default value used)
        nonh  = 0 (no record found, default value used)
      gwflow  = 0 (no record found, default value used)
         q3d  = 0 (no record found, default value used)
     swrunup  = 0 (no record found, default value used)
       ships  = 0 (no record found, default value used)
      bchwiz  = 0 (no record found, default value used)
  vegetation  = 0 (no record found, default value used)
    setbathy  = 0 (no record found, default value used)
  --------------------------------
  Grid parameters:
    gridform  = xbeach (no record found, default value used)
        xori  = -7592.8348
        yori  = .0000
        alfa  = .0000
          nx  = 592
          ny  = 0
      posdwn  = .0000
     depfile  = bed.dep
       vardx  = 1
          dx  = -1.0000 (no record found, default value used)
          dy  = -1.0000 (no record found, default value used)
       xfile  = x.grd
       yfile  = y.grd
    thetamin  = 225.0000 Warning: value > recommended value of 180.0000
    thetamax  = 315.0000 Warning: value > recommended value of 180.0000
      dtheta  = 90.0000 Warning: value > recommended value of 20.0000
   thetanaut  = 1
  --------------------------------
  Model time parameters:
         CFL  = .7000 (no record found, default value used)
       tstop  = 18000.0000
  --------------------------------
  Physical constants:
         rho  = 1025.0000 (no record found, default value used)
           g  = 9.8100 (no record found, default value used)
  depthscale  = 1.0000 (no record found, default value used)
  --------------------------------
  Initial conditions:
  zsinitfile  = None specified
  hotstartflo = 0 (no record found, default value used)
  --------------------------------
  Wave boundary condition parameters:
      instat  = jons
      bcfile  = filelist.txt
       taper  = 100.0000 (no record found, default value used)
        nmax  = .8000 (no record found, default value used)
    leftwave  = neumann (no record found, default value used)
   rightwave  = neumann (no record found, default value used)
  --------------------------------
  Wave-spectrum boundary condition parameters:
  nonhspectru = 0 (no record found, default value used)
      random  = 1 (no record found, default value used)
     fcutoff  = .0000 (no record found, default value used)
        nspr  = 0 (no record found, default value used)
     trepfac  = .0100 (no record found, default value used)
     sprdthr  = .0800 (no record found, default value used)
      oldwbc  = 0 (no record found, default value used)
  correctHm0  = 1 (no record found, default value used)
      oldnyq  = 0 (no record found, default value used)
  Tm01switch  = 0 (no record found, default value used)
  wbcversion  = 3 (no record found, default value used)
  nspectrumlo = 1 (no record found, default value used)
  --------------------------------
  Flow boundary condition parameters:
       front  = abs_2d (no record found, default value used)
        left  = neumann (no record found, default value used)
       right  = neumann (no record found, default value used)
        back  = abs_2d (no record found, default value used)
         ARC  = 1 (no record found, default value used)
       order  = 2.0000 (no record found, default value used)
     carspan  = 0 (no record found, default value used)
    freewave  = 0 (no record found, default value used)
        epsi  = -1.0000 (no record found, default value used)
          nc  = 1 (no record found, default value used)
    tidetype  = velocity (no record found, default value used)
  --------------------------------
  Tide boundary conditions:
     tideloc  = 2
  paulrevere  = land (no record found, default value used)
     zs0file  = tide.txt
  --------------------------------
  Discharge boundary conditions:
  disch_loc_f = None specified
  disch_times = None specified
  ndischarge  = 0 (no record found, default value used)
  ntdischarge = 0 (no record found, default value used)
        beta  = .1000 (no record found, default value used)
  --------------------------------
  Wave breaking parameters:
       break  = roelvink2 (no record found, default value used)
       gamma  = .5500 (no record found, default value used)
       alpha  = 1.0000 (no record found, default value used)
           n  = 10.0000 (no record found, default value used)
      gammax  = 2.0000 (no record found, default value used)
       delta  = .0000 (no record found, default value used)
          fw  = .0000 (no record found, default value used)
    fwcutoff  = 1000.0000 (no record found, default value used)
  breakerdela = 1 (no record found, default value used)
  shoaldelay  = 0 (no record found, default value used)
       facsd  = 1.0000 (no record found, default value used)
      facrun  = 1.0000 (no record found, default value used)
  --------------------------------
  Roller parameters:
      roller  = 1 (no record found, default value used)
         rfb  = 0 (no record found, default value used)
  --------------------------------
  Wave-current interaction parameters:
         wci  = 0 (no record found, default value used)
        hwci  = .1000 (no record found, default value used)
        cats  = 4.0000 (no record found, default value used)
  --------------------------------
  Flow parameters:
  bedfriction = chezy (no record found, default value used)
  bedfricfile = None specified
           C  = 55.0000 (no record found, default value used)
         nuh  = .1000 (no record found, default value used)
      nuhfac  = 1.0000 (no record found, default value used)
        nuhv  = 1.0000 (no record found, default value used)
        smag  = 1 (no record found, default value used)
  --------------------------------
  Coriolis force parameters:
      wearth  = .0417 (no record found, default value used)
         lat  = .0000 (no record found, default value used)
  --------------------------------
  Wind parameters:
        rhoa  = 1.2500 (no record found, default value used)
          Cd  = .0020 (no record found, default value used)
    windfile  = None specified
       windv  = .0000 (no record found, default value used)
      windth  = 270.0000 (no record found, default value used)
  --------------------------------
  Bed composition parameters:
         ngd  = 1 (no record found, default value used)
          nd  = 3 (no record found, default value used)
         por  = .4000 (no record found, default value used)
  D50  = .0002 (no record found, default value used)
  D90  = .0003 (no record found, default value used)
        rhos  = 2650.0000 (no record found, default value used)
         dzg  = .1000 (no record found, default value used)
        dzg1  = .1000 (no record found, default value used)
        dzg2  = .1000 (no record found, default value used)
        dzg3  = .1000 (no record found, default value used)
  sedcal  = 1.0000 (no record found, default value used)
  ucrcal  = 1.0000 (no record found, default value used)
  --------------------------------
  Sediment transport parameters:
        form  = vanthiel_vanrijn (no record found, default value used)
    waveform  = vanthiel (no record found, default value used)
         sws  = 1 (no record found, default value used)
         lws  = 1 (no record found, default value used)
       BRfac  = 1.0000 (no record found, default value used)
       facsl  = 1.6000 (no record found, default value used)
          z0  = .0060 (no record found, default value used)
        smax  = -1.0000 (no record found, default value used)
       tsfac  = .1000 (no record found, default value used)
       facua  = .1000 (no record found, default value used)
       facSk  = .1000 (no record found, default value used)
       facAs  = .1000 (no record found, default value used)
     turbadv  = none (no record found, default value used)
        turb  = bore_averaged (no record found, default value used)
       Tbfac  = 1.0000 (no record found, default value used)
       Tsmin  = .5000 (no record found, default value used)
         lwt  = 0 (no record found, default value used)
       betad  = 1.0000 (no record found, default value used)
         sus  = 1 (no record found, default value used)
         bed  = 1 (no record found, default value used)
        bulk  = 1 (no record found, default value used)
       facDc  = 1.0000 (no record found, default value used)
      jetfac  = .0000 (no record found, default value used)
  --------------------------------
  Morphology parameters:
      morfac  = 1.0000 (no record found, default value used)
   morfacopt  = 1 (no record found, default value used)
    morstart  = 120.0000 (no record found, default value used)
     morstop  = 18000.0000 (no record found, default value used)
      wetslp  = .3000 (no record found, default value used)
      dryslp  = 1.0000 (no record found, default value used)
     hswitch  = .1000 (no record found, default value used)
       dzmax  = .0500 (no record found, default value used)
      struct  = 0 (no record found, default value used)
  --------------------------------
  Output variables:
     timings  = 1 (no record found, default value used)
      tunits  = None specified
      tstart  = .0000
        tint  = 1.0000 (no record found, default value used)
    tsglobal  = None specified
       tintg  = 60.0000
    tspoints  = None specified
       tintp  = 1.0000
     tscross  = None specified
       tintc  = 1.0000 (no record found, default value used)
      tsmean  = None specified
       tintm  = 18000.0000
  nglobalvar  = 12
  nglobalvar: Will generate global output for variable:H
  nglobalvar: Will generate global output for variable:zb
  nglobalvar: Will generate global output for variable:zs
  nglobalvar: Will generate global output for variable:hh
  nglobalvar: Will generate global output for variable:u
  nglobalvar: Will generate global output for variable:v
  nglobalvar: Will generate global output for variable:R
  nglobalvar: Will generate global output for variable:D
  nglobalvar: Will generate global output for variable:thetamean
  nglobalvar: Will generate global output for variable:Fx
  nglobalvar: Will generate global output for variable:Fy
  nglobalvar: Will generate global output for variable:wetz
     npoints  = 0 (no record found, default value used)
    nrugauge  = 0 (no record found, default value used)
   npointvar  = 0 (no record found, default value used)
   nrugdepth  = 1 (no record found, default value used)
  rugdepth  = .0000 (no record found, default value used)
    nmeanvar  = 6
  nmeanvar: Will generate mean, min, max and variance output for variable:H
  nmeanvar: Will generate mean, min, max and variance output for variable:zs
  nmeanvar: Will generate mean, min, max and variance output for variable:hh
  nmeanvar: Will generate mean, min, max and variance output for variable:u
  nmeanvar: Will generate mean, min, max and variance output for variable:v
  nmeanvar: Will generate mean, min, max and variance output for variable:thetam
 ean
      ncross  = 0 (no record found, default value used)
  outputforma = netcdf
  ncfilename  = None specified
  netcdf output to:xboutput.nc
  --------------------------------
  Output projection:
  projection  = None specified
      rotate  = 1 (no record found, default value used)
  --------------------------------
  Drifters parameters:
  drifterfile = None specified
    ndrifter  = 0 (no record found, default value used)
  --------------------------------
  Vegetation parameters:
   vegiefile  = None specified
  vegiemapfil = None specified
  --------------------------------
  Wave numerics parameters:
      scheme  = upwind_2 (no record found, default value used)
      snells  = 1 (no record found, default value used)
  --------------------------------
  Flow numerics parameters:
         eps  = .0050 (no record found, default value used)
      eps_sd  = .5000 (no record found, default value used)
        umin  = .0000 (no record found, default value used)
        hmin  = .2000 (no record found, default value used)
    secorder  = 0 (no record found, default value used)
       oldhu  = 0 (no record found, default value used)
  --------------------------------
  Sediment transport numerics parameters:
    thetanum  = 1.0000 (no record found, default value used)
  sourcesink  = 0 (no record found, default value used)
        cmax  = .1000 (no record found, default value used)
  --------------------------------
  Bed update numerics parameters:
     frac_dz  = .7000 (no record found, default value used)
      nd_var  = 2 (no record found, default value used)
       split  = 1.0100 (no record found, default value used)
       merge  = .0100 (no record found, default value used)
  --------------------------------
  MPI parameters:
  mpiboundary = auto (no record found, default value used)
        mmpi  = 2 (no record found, default value used)
        nmpi  = 4 (no record found, default value used)
  --------------------------------
  Finished reading input parameters
  --------------------------------
 Warning: Setting rugdepth to minimum value greater than eps (.00000)
  Warning: 2D absorbing boundary condition [front=abs_2d] reduces to a
           1D absorbing boundary condition [front=abs_1d] in
           1D mode [ny=0]
  Warning: 2D absorbing boundary condition [back=abs_2d] reduces to a
           1D absorbing boundary condition [back=abs_1d] in
           1D mode [ny=0]
  Unknown, unused or multiple statements of parameter TIDELEN in params.txt
  Unknown, unused or multiple statements of parameter RT in params.txt
  Unknown, unused or multiple statements of parameter DTBC in params.txt
  ------------------------------------
  Building Grid and Bathymetry
  ------------------------------------
  Initializing .....
  readtide: reading tide time series from tide.txt ...
  --------------------------------
  Initializing spectral wave boundary conditions
  --------------------------------
  NetCDF outputformat
  Creating netcdf variable: H
  Creating netcdf variable: zb
  Creating netcdf variable: zs
  Creating netcdf variable: hh
  Creating netcdf variable: u
  Creating netcdf variable: v
  Creating netcdf variable: R
  Creating netcdf variable: D
  Creating netcdf variable: thetamean
  Creating netcdf variable: Fx
  Creating netcdf variable: Fy
  Creating netcdf variable: wetz
  Creating netcdf variable: H_mean
  Creating netcdf variable: H_var
  Creating netcdf variable: H_min
  Creating netcdf variable: H_max
  Creating netcdf variable: zs_mean
  Creating netcdf variable: zs_var
  Creating netcdf variable: zs_min
  Creating netcdf variable: zs_max
  Creating netcdf variable: hh_mean
  Creating netcdf variable: hh_var
  Creating netcdf variable: hh_min
  Creating netcdf variable: hh_max
  Creating netcdf variable: u_mean
  Creating netcdf variable: u_var
  Creating netcdf variable: u_min
  Creating netcdf variable: u_max
  Creating netcdf variable: v_mean
  Creating netcdf variable: v_var
  Creating netcdf variable: v_min
  Creating netcdf variable: v_max
  Creating netcdf variable: thetamean_mean
  Creating netcdf variable: thetamean_var
  Creating netcdf variable: thetamean_min
  Creating netcdf variable: thetamean_max
  Writing file definition.
  Setting up boundary conditions
  --------------------------------
  Calculating spectral wave boundary conditions
  --------------------------------
 Reading spectrum at location 1
  waveparams: Reading from jonswap_1.txt ...
  XBeach reading from jonswap_1.txt
      nmodal  = 1 (no record found, default value used)
         Hm0  = 10.6500 Warning: value > recommended value of 5.0000
          fp  = .0549 Warning: value < recommended value of .0625
    gammajsp  = 3.3000
           s  = 20.0000
     mainang  = 270.0000
        fnyq  = 1.0000
         dfj  = .0050 (no record found, default value used)
 Interpreting spectrum at location 1
  Values calculated from interpolated spectrum:
 Hm0       = 10.65 m
 Trep      = 16.68 s
 Mean dir  = 270.00 degN
 Overall Trep from all spectra calculated: 16.68 s
  Calculating Fourier components
 5.0% done
 10.0% done
 15.0% done
 20.0% done
 25.0% done
 30.0% done
 35.0% done
 40.0% done
 45.0% done
 50.0% done
 55.0% done
 60.0% done
 65.0% done
 70.0% done
 75.0% done
 80.0% done
 85.0% done
 90.0% done
 95.0% done
 100.0% done
 Wave energy outside computational domain at offshore boundary: 1.3%
 Calculating short wave time series for theta bin 1 of 1
 Y-point 1 of 1 done.
 Wave bin 1 contains 100.00% of total energy
  Writing wave energy to E_series00001.bcf ...
  file done
  Calculating primary wave interaction
 5.0% done
 10.1% done
 15.1% done
 20.1% done
 25.1% done
 30.2% done
 35.2% done
 40.2% done
 45.2% done
 50.3% done
 55.3% done
 60.3% done
 65.3% done
 70.4% done
 75.4% done
 80.4% done
 85.4% done
 90.5% done
 95.5% done
 100.0% done
  Warning: shallow water so long wave variance is reduced using par%nmax
  Calculating flux at boundary
 Flux 1 of 1
  Writing long wave mass flux to q_series00001.bcf ...
  file done
  --------------------------------
  Spectral wave boundary conditions complete
  --------------------------------
  Boundary conditions complete, starting computation
 Simulation   0.9 percent complete. Average dt   0.248 seconds
 Time remaining   8 minutes and  60 seconds
 Simulation   2.0 percent complete. Average dt   0.248 seconds
 Time remaining   7 minutes and  30 seconds
 Simulation   3.0 percent complete. Average dt   0.248 seconds
 Time remaining   7 minutes and  58 seconds
 Simulation   4.1 percent complete. Average dt   0.225 seconds
 Time remaining   7 minutes and  35 seconds
 Simulation   4.4 percent complete. Average dt   0.118 seconds
 Time remaining  26 minutes
 Simulation   4.8 percent complete. Average dt   0.150 seconds
 Time remaining  20 minutes
 Simulation   5.2 percent complete. Average dt   0.163 seconds
 Time remaining  19 minutes
 Simulation   5.6 percent complete. Average dt   0.151 seconds
 Time remaining  20 minutes
 Simulation   6.0 percent complete. Average dt   0.150 seconds
 Time remaining  20 minutes
 Simulation   6.4 percent complete. Average dt   0.154 seconds
 Time remaining  19 minutes
 Simulation   6.8 percent complete. Average dt   0.163 seconds
 Time remaining  18 minutes
 Simulation   7.2 percent complete. Average dt   0.181 seconds
 Time remaining  16 minutes
 Simulation   7.6 percent complete. Average dt   0.143 seconds
 Time remaining  21 minutes
 Simulation   8.0 percent complete. Average dt   0.157 seconds
 Time remaining  19 minutes
 Simulation   8.4 percent complete. Average dt   0.162 seconds
 Time remaining  18 minutes
 Simulation   8.7 percent complete. Average dt   0.130 seconds
 Time remaining  23 minutes
 Simulation   9.1 percent complete. Average dt   0.133 seconds
 Time remaining  22 minutes
 Simulation   9.5 percent complete. Average dt   0.175 seconds
 Time remaining  17 minutes
 Simulation   9.9 percent complete. Average dt   0.157 seconds
 Time remaining  18 minutes
 Simulation  10.3 percent complete. Average dt   0.139 seconds
 Time remaining  20 minutes
 Simulation  10.7 percent complete. Average dt   0.159 seconds
 Time remaining  18 minutes
 Simulation  11.1 percent complete. Average dt   0.148 seconds
 Time remaining  19 minutes
 Simulation  11.4 percent complete. Average dt   0.145 seconds
 Time remaining  19 minutes
 Simulation  11.9 percent complete. Average dt   0.178 seconds
 Time remaining  15 minutes
 Simulation  12.3 percent complete. Average dt   0.142 seconds
 Time remaining  20 minutes
 Simulation  12.7 percent complete. Average dt   0.165 seconds
 Time remaining  17 minutes
 Simulation  13.1 percent complete. Average dt   0.176 seconds
 Time remaining  16 minutes
 Simulation  13.5 percent complete. Average dt   0.136 seconds
 Time remaining  20 minutes
 Simulation  13.8 percent complete. Average dt   0.149 seconds
 Time remaining  18 minutes
 Simulation  14.3 percent complete. Average dt   0.182 seconds
 Time remaining  15 minutes
 Simulation  14.7 percent complete. Average dt   0.156 seconds
 Time remaining  18 minutes
 Simulation  15.1 percent complete. Average dt   0.154 seconds
 Time remaining  18 minutes
 Simulation  15.5 percent complete. Average dt   0.150 seconds
 Time remaining  18 minutes
 Simulation  16.0 percent complete. Average dt   0.206 seconds
 Time remaining  13 minutes
 Simulation  16.4 percent complete. Average dt   0.160 seconds
 Time remaining  17 minutes
 Simulation  16.8 percent complete. Average dt   0.156 seconds
 Time remaining  17 minutes
 Simulation  17.2 percent complete. Average dt   0.164 seconds
 Time remaining  16 minutes
 Simulation  17.6 percent complete. Average dt   0.147 seconds
 Time remaining  19 minutes
 Simulation  18.0 percent complete. Average dt   0.172 seconds
 Time remaining  14 minutes
 Simulation  18.4 percent complete. Average dt   0.140 seconds
 Time remaining  18 minutes
 Simulation  18.9 percent complete. Average dt   0.191 seconds
 Time remaining  13 minutes
 Simulation  19.3 percent complete. Average dt   0.172 seconds
 Time remaining  15 minutes
 Simulation  19.7 percent complete. Average dt   0.150 seconds
 Time remaining  17 minutes
  --------------------------------
  Calculating spectral wave boundary conditions
  --------------------------------
 Reading spectrum at location 1
  waveparams: Reading from jonswap_2.txt ...
  XBeach reading from jonswap_2.txt
      nmodal  = 1 (no record found, default value used)
         Hm0  = 10.6500 Warning: value > recommended value of 5.0000
          fp  = .0549 Warning: value < recommended value of .0625
    gammajsp  = 3.3000
           s  = 20.0000
     mainang  = 270.0000
        fnyq  = 1.0000
         dfj  = .0050 (no record found, default value used)
 Interpreting spectrum at location 1
  Values calculated from interpolated spectrum:
 Hm0       = 10.65 m
 Trep      = 16.68 s
 Mean dir  = 270.00 degN
 Overall Trep from all spectra calculated: 16.68 s
  Calculating Fourier components
 5.0% done
 10.0% done
 15.0% done
 20.0% done
 25.0% done
 30.0% done
 35.0% done
 40.0% done
 45.0% done
 50.0% done
 55.0% done
 60.0% done
 65.0% done
 70.0% done
 75.0% done
 80.0% done
 85.0% done
 90.0% done
 95.0% done
 100.0% done
 Wave energy outside computational domain at offshore boundary: 1.3%
 Calculating short wave time series for theta bin 1 of 1
 Y-point 1 of 1 done.
 Wave bin 1 contains 100.00% of total energy
  Writing wave energy to E_series00002.bcf ...
  file done
  Calculating primary wave interaction
 5.0% done
 10.1% done
 15.1% done
 20.1% done
 25.1% done
 30.2% done
 35.2% done
 40.2% done
 45.2% done
 50.3% done
 55.3% done
 60.3% done
 65.3% done
 70.4% done
 75.4% done
 80.4% done
 85.4% done
 90.5% done
 95.5% done
 100.0% done
  Warning: shallow water so long wave variance is reduced using par%nmax
  Calculating flux at boundary
 Flux 1 of 1
  Writing long wave mass flux to q_series00002.bcf ...
  file done
  --------------------------------
  Spectral wave boundary conditions complete
  --------------------------------
 Simulation  20.0 percent complete. Average dt   0.147 seconds
 Time remaining  28 minutes
 Simulation  20.4 percent complete. Average dt   0.151 seconds
 Time remaining  17 minutes
 Simulation  20.8 percent complete. Average dt   0.143 seconds
 Time remaining  17 minutes
 Simulation  21.2 percent complete. Average dt   0.166 seconds
 Time remaining  15 minutes
 Simulation  21.5 percent complete. Average dt   0.140 seconds
 Time remaining  18 minutes
 Simulation  21.9 percent complete. Average dt   0.153 seconds
 Time remaining  16 minutes
 Simulation  22.4 percent complete. Average dt   0.173 seconds
 Time remaining  14 minutes
 Simulation  22.7 percent complete. Average dt   0.135 seconds
 Time remaining  19 minutes
 Simulation  23.1 percent complete. Average dt   0.144 seconds
 Time remaining  17 minutes
 Simulation  23.4 percent complete. Average dt   0.135 seconds
 Time remaining  18 minutes
 Simulation  23.8 percent complete. Average dt   0.145 seconds
 Time remaining  17 minutes
 Simulation  24.2 percent complete. Average dt   0.162 seconds
 Time remaining  15 minutes
 Simulation  24.6 percent complete. Average dt   0.163 seconds
 Time remaining  15 minutes
 Simulation  24.9 percent complete. Average dt   0.133 seconds
 Time remaining  18 minutes
 Simulation  25.4 percent complete. Average dt   0.169 seconds
 Time remaining  13 minutes
 Simulation  25.9 percent complete. Average dt   0.145 seconds
 Time remaining  13 minutes
 Simulation  26.3 percent complete. Average dt   0.160 seconds
 Time remaining  15 minutes
 Simulation  26.6 percent complete. Average dt   0.144 seconds
 Time remaining  16 minutes
 Simulation  27.1 percent complete. Average dt   0.182 seconds
 Time remaining  13 minutes
 Simulation  27.4 percent complete. Average dt   0.123 seconds
 Time remaining  19 minutes
 Simulation  27.8 percent complete. Average dt   0.163 seconds
 Time remaining  14 minutes
 Simulation  28.2 percent complete. Average dt   0.153 seconds
 Time remaining  14 minutes
 Simulation  28.6 percent complete. Average dt   0.148 seconds
 Time remaining  14 minutes
 Simulation  29.0 percent complete. Average dt   0.149 seconds
 Time remaining  15 minutes
 Simulation  29.4 percent complete. Average dt   0.158 seconds
 Time remaining  14 minutes
 Simulation  29.9 percent complete. Average dt   0.177 seconds
 Time remaining  13 minutes
 Simulation  30.3 percent complete. Average dt   0.146 seconds
 Time remaining  14 minutes
 Simulation  30.6 percent complete. Average dt   0.147 seconds
 Time remaining  15 minutes
 Simulation  31.1 percent complete. Average dt   0.158 seconds
 Time remaining  14 minutes
 Simulation  31.4 percent complete. Average dt   0.143 seconds
 Time remaining  15 minutes
 Simulation  31.9 percent complete. Average dt   0.178 seconds
 Time remaining  12 minutes
 Simulation  32.2 percent complete. Average dt   0.135 seconds
 Time remaining  16 minutes
 Simulation  32.7 percent complete. Average dt   0.180 seconds
 Time remaining  12 minutes
 Simulation  33.1 percent complete. Average dt   0.144 seconds
 Time remaining  15 minutes
 Simulation  33.4 percent complete. Average dt   0.137 seconds
 Time remaining  15 minutes
 Simulation  33.8 percent complete. Average dt   0.139 seconds
 Time remaining  15 minutes
 Simulation  34.2 percent complete. Average dt   0.155 seconds
 Time remaining  13 minutes
 Simulation  34.6 percent complete. Average dt   0.164 seconds
 Time remaining  13 minutes
 Simulation  34.9 percent complete. Average dt   0.145 seconds
 Time remaining  14 minutes
 Simulation  35.3 percent complete. Average dt   0.145 seconds
 Time remaining  14 minutes
 Simulation  35.7 percent complete. Average dt   0.163 seconds
 Time remaining  13 minutes
 Simulation  36.1 percent complete. Average dt   0.151 seconds
 Time remaining  13 minutes
 Simulation  36.5 percent complete. Average dt   0.156 seconds
 Time remaining  12 minutes
 Simulation  37.0 percent complete. Average dt   0.148 seconds
 Time remaining  11 minutes
 Simulation  37.3 percent complete. Average dt   0.122 seconds
 Time remaining  16 minutes
 Simulation  37.7 percent complete. Average dt   0.161 seconds
 Time remaining  12 minutes
 Simulation  38.1 percent complete. Average dt   0.157 seconds
 Time remaining  13 minutes
 Simulation  38.5 percent complete. Average dt   0.156 seconds
 Time remaining  13 minutes
 Simulation  38.8 percent complete. Average dt   0.122 seconds
 Time remaining  16 minutes
 Simulation  39.3 percent complete. Average dt   0.175 seconds
 Time remaining  11 minutes
 Simulation  39.7 percent complete. Average dt   0.167 seconds
 Time remaining  11 minutes
  --------------------------------
  Calculating spectral wave boundary conditions
  --------------------------------
 Reading spectrum at location 1
  waveparams: Reading from jonswap_3.txt ...
  XBeach reading from jonswap_3.txt
      nmodal  = 1 (no record found, default value used)
         Hm0  = 10.6500 Warning: value > recommended value of 5.0000
          fp  = .0549 Warning: value < recommended value of .0625
    gammajsp  = 3.3000
           s  = 20.0000
     mainang  = 270.0000
        fnyq  = 1.0000
         dfj  = .0050 (no record found, default value used)
 Interpreting spectrum at location 1
  Values calculated from interpolated spectrum:
 Hm0       = 10.65 m
 Trep      = 16.68 s
 Mean dir  = 270.00 degN
 Overall Trep from all spectra calculated: 16.68 s
  Calculating Fourier components
 5.0% done
 10.0% done
 15.0% done
 20.0% done
 25.0% done
 30.0% done
 35.0% done
 40.0% done
 45.0% done
 50.0% done
 55.0% done
 60.0% done
 65.0% done
 70.0% done
 75.0% done
 80.0% done
 85.0% done
 90.0% done
 95.0% done
 100.0% done
 Wave energy outside computational domain at offshore boundary: 1.3%
 Calculating short wave time series for theta bin 1 of 1
 Y-point 1 of 1 done.
 Wave bin 1 contains 100.00% of total energy
  Writing wave energy to E_series00003.bcf ...
  file done
  Calculating primary wave interaction
 5.0% done
 10.1% done
 15.1% done
 20.1% done
 25.1% done
 30.2% done
 35.2% done
 40.2% done
 45.2% done
 50.3% done
 55.3% done
 60.3% done
 65.3% done
 70.4% done
 75.4% done
 80.4% done
 85.4% done
 90.5% done
 95.5% done
 100.0% done
  Warning: shallow water so long wave variance is reduced using par%nmax
  Calculating flux at boundary
 Flux 1 of 1
  Writing long wave mass flux to q_series00003.bcf ...
  file done
  --------------------------------
  Spectral wave boundary conditions complete
  --------------------------------
 Simulation  40.0 percent complete. Average dt   0.172 seconds
 Time remaining  19 minutes
 Simulation  40.4 percent complete. Average dt   0.140 seconds
 Time remaining  13 minutes
 Simulation  40.7 percent complete. Average dt   0.116 seconds
 Time remaining  16 minutes
 Simulation  41.1 percent complete. Average dt   0.148 seconds
 Time remaining  10 minutes
 Simulation  41.6 percent complete. Average dt   0.156 seconds
 Time remaining  11 minutes
 Simulation  42.0 percent complete. Average dt   0.162 seconds
 Time remaining  11 minutes
 Simulation  42.3 percent complete. Average dt   0.125 seconds
 Time remaining  14 minutes
 Simulation  42.7 percent complete. Average dt   0.141 seconds
 Time remaining  12 minutes
 Simulation  43.1 percent complete. Average dt   0.177 seconds
 Time remaining  10 minutes
 Simulation  43.8 percent complete. Average dt   0.150 seconds
 Time remaining   7 minutes and  46 seconds
 Simulation  44.1 percent complete. Average dt   0.146 seconds
 Time remaining  12 minutes
 Simulation  44.6 percent complete. Average dt   0.172 seconds
 Time remaining  10 minutes
 Simulation  44.9 percent complete. Average dt   0.131 seconds
 Time remaining  13 minutes
 Simulation  45.5 percent complete. Average dt   0.153 seconds
 Time remaining   8 minutes and   9 seconds
 Simulation  46.0 percent complete. Average dt   0.181 seconds
 Time remaining   9 minutes and   7 seconds
 Simulation  46.4 percent complete. Average dt   0.155 seconds
 Time remaining  11 minutes
 Simulation  47.0 percent complete. Average dt   0.148 seconds
 Time remaining   7 minutes and  27 seconds
 Simulation  47.6 percent complete. Average dt   0.176 seconds
 Time remaining   6 minutes and  53 seconds
 Simulation  48.1 percent complete. Average dt   0.180 seconds
 Time remaining   9 minutes and   2 seconds
 Simulation  48.7 percent complete. Average dt   0.159 seconds
 Time remaining   7 minutes and   3 seconds
 Simulation  49.2 percent complete. Average dt   0.140 seconds
 Time remaining   8 minutes and  13 seconds
 Simulation  49.8 percent complete. Average dt   0.151 seconds
 Time remaining   7 minutes and  40 seconds
 Simulation  50.3 percent complete. Average dt   0.185 seconds
 Time remaining   7 minutes and  32 seconds
 Simulation  51.0 percent complete. Average dt   0.141 seconds
 Time remaining   6 minutes and  19 seconds
 Simulation  51.9 percent complete. Average dt   0.170 seconds
 Time remaining   4 minutes and  30 seconds
 Simulation  52.5 percent complete. Average dt   0.125 seconds
 Time remaining   5 minutes and  60 seconds
 Simulation  53.4 percent complete. Average dt   0.173 seconds
 Time remaining   4 minutes and  15 seconds
 Simulation  54.2 percent complete. Average dt   0.147 seconds
 Time remaining   4 minutes and  51 seconds
 Simulation  55.1 percent complete. Average dt   0.170 seconds
 Time remaining   4 minutes and   9 seconds
 Simulation  56.0 percent complete. Average dt   0.162 seconds
 Time remaining   4 minutes and  15 seconds
 Simulation  56.8 percent complete. Average dt   0.167 seconds
 Time remaining   4 minutes and  12 seconds
 Simulation  57.6 percent complete. Average dt   0.150 seconds
 Time remaining   4 minutes and  45 seconds
 Simulation  58.3 percent complete. Average dt   0.156 seconds
 Time remaining   4 minutes and  38 seconds
 Simulation  59.1 percent complete. Average dt   0.150 seconds
 Time remaining   4 minutes and  34 seconds
 Simulation  59.9 percent complete. Average dt   0.174 seconds
 Time remaining   4 minutes and  19 seconds
  --------------------------------
  Calculating spectral wave boundary conditions
  --------------------------------
 Reading spectrum at location 1
  waveparams: Reading from jonswap_4.txt ...
  XBeach reading from jonswap_4.txt
      nmodal  = 1 (no record found, default value used)
         Hm0  = 10.6500 Warning: value > recommended value of 5.0000
          fp  = .0549 Warning: value < recommended value of .0625
    gammajsp  = 3.3000
           s  = 20.0000
     mainang  = 270.0000
        fnyq  = 1.0000
         dfj  = .0050 (no record found, default value used)
 Interpreting spectrum at location 1
  Values calculated from interpolated spectrum:
 Hm0       = 10.65 m
 Trep      = 16.68 s
 Mean dir  = 270.00 degN
 Overall Trep from all spectra calculated: 16.68 s
  Calculating Fourier components
 5.0% done
 10.0% done
 15.0% done
 20.0% done
 25.0% done
 30.0% done
 35.0% done
 40.0% done
 45.0% done
 50.0% done
 55.0% done
 60.0% done
 65.0% done
 70.0% done
 75.0% done
 80.0% done
 85.0% done
 90.0% done
 95.0% done
 100.0% done
 Wave energy outside computational domain at offshore boundary: 1.4%
 Calculating short wave time series for theta bin 1 of 1
 Y-point 1 of 1 done.
 Wave bin 1 contains 100.00% of total energy
  Writing wave energy to E_series00004.bcf ...
  file done
  Calculating primary wave interaction
 5.0% done
 10.1% done
 15.1% done
 20.1% done
 25.1% done
 30.2% done
 35.2% done
 40.2% done
 45.2% done
 50.3% done
 55.3% done
 60.3% done
 65.3% done
 70.4% done
 75.4% done
 80.4% done
 85.4% done
 90.5% done
 95.5% done
 100.0% done
  Warning: shallow water so long wave variance is reduced using par%nmax
  Calculating flux at boundary
 Flux 1 of 1
  Writing long wave mass flux to q_series00004.bcf ...
  file done
  --------------------------------
  Spectral wave boundary conditions complete
  --------------------------------
 Simulation  60.3 percent complete. Average dt   0.163 seconds
 Time remaining   6 minutes and  53 seconds
 Simulation  61.2 percent complete. Average dt   0.174 seconds
 Time remaining   3 minutes and  37 seconds
 Simulation  61.9 percent complete. Average dt   0.131 seconds
 Time remaining   4 minutes and  48 seconds
 Simulation  62.6 percent complete. Average dt   0.140 seconds
 Time remaining   4 minutes and  31 seconds
 Simulation  63.4 percent complete. Average dt   0.155 seconds
 Time remaining   3 minutes and  45 seconds
 Simulation  64.1 percent complete. Average dt   0.147 seconds
 Time remaining   4 minutes and   5 seconds
 Simulation  64.8 percent complete. Average dt   0.131 seconds
 Time remaining   4 minutes and  18 seconds
 Simulation  65.5 percent complete. Average dt   0.139 seconds
 Time remaining   4 minutes and   7 seconds
 Simulation  66.4 percent complete. Average dt   0.179 seconds
 Time remaining   3 minutes and   2 seconds
 Simulation  67.2 percent complete. Average dt   0.154 seconds
 Time remaining   3 minutes and  25 seconds
 Simulation  68.1 percent complete. Average dt   0.156 seconds
 Time remaining   3 minutes and  16 seconds
 Simulation  68.8 percent complete. Average dt   0.155 seconds
 Time remaining   3 minutes and  20 seconds
 Simulation  69.6 percent complete. Average dt   0.151 seconds
 Time remaining   3 minutes and  25 seconds
 Simulation  70.3 percent complete. Average dt   0.148 seconds
 Time remaining   3 minutes and  20 seconds
 Simulation  71.1 percent complete. Average dt   0.141 seconds
 Time remaining   3 minutes and  15 seconds
 Simulation  71.9 percent complete. Average dt   0.160 seconds
 Time remaining   2 minutes and  57 seconds
 Simulation  72.7 percent complete. Average dt   0.160 seconds
 Time remaining   2 minutes and  42 seconds
 Simulation  73.5 percent complete. Average dt   0.151 seconds
 Time remaining   2 minutes and  46 seconds
 Simulation  74.2 percent complete. Average dt   0.159 seconds
 Time remaining   2 minutes and  57 seconds
 Simulation  74.9 percent complete. Average dt   0.136 seconds
 Time remaining   3 minutes and   2 seconds
 Simulation  75.7 percent complete. Average dt   0.158 seconds
 Time remaining   2 minutes and  32 seconds
 Simulation  76.6 percent complete. Average dt   0.164 seconds
 Time remaining   2 minutes and  18 seconds
 Simulation  77.3 percent complete. Average dt   0.138 seconds
 Time remaining   2 minutes and  35 seconds
 Simulation  78.2 percent complete. Average dt   0.166 seconds
 Time remaining   2 minutes and   6 seconds
 Simulation  79.0 percent complete. Average dt   0.156 seconds
 Time remaining   2 minutes and  10 seconds
 Simulation  79.7 percent complete. Average dt   0.146 seconds
 Time remaining   2 minutes and  17 seconds
  --------------------------------
  Calculating spectral wave boundary conditions
  --------------------------------
 Reading spectrum at location 1
  waveparams: Reading from jonswap_5.txt ...
  XBeach reading from jonswap_5.txt
      nmodal  = 1 (no record found, default value used)
         Hm0  = 10.6500 Warning: value > recommended value of 5.0000
          fp  = .0549 Warning: value < recommended value of .0625
    gammajsp  = 3.3000
           s  = 20.0000
     mainang  = 270.0000
        fnyq  = 1.0000
         dfj  = .0050 (no record found, default value used)
 Interpreting spectrum at location 1
  Values calculated from interpolated spectrum:
 Hm0       = 10.65 m
 Trep      = 16.68 s
 Mean dir  = 270.00 degN
 Overall Trep from all spectra calculated: 16.68 s
  Calculating Fourier components
 5.0% done
 10.0% done
 15.0% done
 20.0% done
 25.0% done
 30.0% done
 35.0% done
 40.0% done
 45.0% done
 50.0% done
 55.0% done
 60.0% done
 65.0% done
 70.0% done
 75.0% done
 80.0% done
 85.0% done
 90.0% done
 95.0% done
 100.0% done
 Wave energy outside computational domain at offshore boundary: 1.7%
 Calculating short wave time series for theta bin 1 of 1
 Y-point 1 of 1 done.
 Wave bin 1 contains 100.00% of total energy
  Writing wave energy to E_series00005.bcf ...
  file done
  Calculating primary wave interaction
 5.0% done
 10.1% done
 15.1% done
 20.1% done
 25.1% done
 30.2% done
 35.2% done
 40.2% done
 45.2% done
 50.3% done
 55.3% done
 60.3% done
 65.3% done
 70.4% done
 75.4% done
 80.4% done
 85.4% done
 90.5% done
 95.5% done
 100.0% done
  Warning: shallow water so long wave variance is reduced using par%nmax
  Calculating flux at boundary
 Flux 1 of 1
  Writing long wave mass flux to q_series00005.bcf ...
  file done
  --------------------------------
  Spectral wave boundary conditions complete
  --------------------------------
 Simulation  80.3 percent complete. Average dt   0.153 seconds
 Time remaining   2 minutes and  44 seconds
 Simulation  81.1 percent complete. Average dt   0.151 seconds
 Time remaining   2 minutes and   3 seconds
 Simulation  81.8 percent complete. Average dt   0.149 seconds
 Time remaining   2 minutes and   2 seconds
 Simulation  82.6 percent complete. Average dt   0.150 seconds
 Time remaining   1 minutes and  54 seconds
 Simulation  83.4 percent complete. Average dt   0.153 seconds
 Time remaining   1 minutes and  43 seconds
 Simulation  84.2 percent complete. Average dt   0.159 seconds
 Time remaining   1 minutes and  34 seconds
 Simulation  85.0 percent complete. Average dt   0.150 seconds
 Time remaining   1 minutes and  35 seconds
 Simulation  85.8 percent complete. Average dt   0.151 seconds
 Time remaining   1 minutes and  33 seconds
 Simulation  86.6 percent complete. Average dt   0.157 seconds
 Time remaining   1 minutes and  24 seconds
 Simulation  87.4 percent complete. Average dt   0.157 seconds
 Time remaining   1 minutes and  16 seconds
 Simulation  88.1 percent complete. Average dt   0.140 seconds
 Time remaining   1 minutes and  33 seconds
 Simulation  88.9 percent complete. Average dt   0.165 seconds
 Time remaining   1 minutes and   4 seconds
 Simulation  89.7 percent complete. Average dt   0.152 seconds
 Time remaining   1 minutes and   6 seconds
 Simulation  90.6 percent complete. Average dt   0.164 seconds
 Time remaining  55 seconds
 Simulation  91.3 percent complete. Average dt   0.144 seconds
 Time remaining   1 minutes and   2 seconds
 Simulation  92.1 percent complete. Average dt   0.159 seconds
 Time remaining  47 seconds
 Simulation  93.0 percent complete. Average dt   0.177 seconds
 Time remaining  38 seconds
 Simulation  93.8 percent complete. Average dt   0.135 seconds
 Time remaining  44 seconds
 Simulation  94.6 percent complete. Average dt   0.158 seconds
 Time remaining  34 seconds
 Simulation  95.4 percent complete. Average dt   0.160 seconds
 Time remaining  27 seconds
 Simulation  96.2 percent complete. Average dt   0.159 seconds
 Time remaining  22 seconds
 Simulation  97.0 percent complete. Average dt   0.144 seconds
 Time remaining  20 seconds
 Simulation  97.9 percent complete. Average dt   0.169 seconds
 Time remaining  12 seconds
 Simulation  98.7 percent complete. Average dt   0.152 seconds
 Time remaining   8 seconds
 Simulation  99.5 percent complete. Average dt   0.165 seconds
 Time remaining   4 seconds
  --------------------------------
  Calculating spectral wave boundary conditions
  --------------------------------
 Reading spectrum at location 1
  waveparams: Reading from jonswap_6.txt ...
  XBeach reading from jonswap_6.txt
      nmodal  = 1 (no record found, default value used)
         Hm0  = 10.6500 Warning: value > recommended value of 5.0000
          fp  = .0549 Warning: value < recommended value of .0625
    gammajsp  = 3.3000
           s  = 20.0000
     mainang  = 270.0000
        fnyq  = 1.0000
         dfj  = .0050 (no record found, default value used)
 Interpreting spectrum at location 1
  Values calculated from interpolated spectrum:
 Hm0       = 10.65 m
 Trep      = 16.68 s
 Mean dir  = 270.00 degN
 Overall Trep from all spectra calculated: 16.68 s
  Calculating Fourier components
 5.0% done
 10.0% done
 15.0% done
 20.0% done
 25.0% done
 30.0% done
 35.0% done
 40.0% done
 45.0% done
 50.0% done
 55.0% done
 60.0% done
 65.0% done
 70.0% done
 75.0% done
 80.0% done
 85.0% done
 90.0% done
 95.0% done
 100.0% done
 Wave energy outside computational domain at offshore boundary: 1.0%
 Calculating short wave time series for theta bin 1 of 1
 Y-point 1 of 1 done.
 Wave bin 1 contains 100.00% of total energy
  Writing wave energy to E_series00006.bcf ...
  file done
  Calculating primary wave interaction
 5.0% done
 10.1% done
 15.1% done
 20.1% done
 25.1% done
 30.2% done
 35.2% done
 40.2% done
 45.2% done
 50.3% done
 55.3% done
 60.3% done
 65.3% done
 70.4% done
 75.4% done
 80.4% done
 85.4% done
 90.5% done
 95.5% done
 100.0% done
  Warning: shallow water so long wave variance is reduced using par%nmax
  Calculating flux at boundary
 Flux 1 of 1
  Writing long wave mass flux to q_series00006.bcf ...
  file done
  --------------------------------
  Spectral wave boundary conditions complete
  --------------------------------
  Duration   :    633.379660100000      seconds
  Timesteps  :       115091
  Average dt :   0.156397980728293      seconds
  Unit speed :   9.280429068204304E-006 seconds/1
  End of program xbeach