Schema openDA.xsd


element openDaApplication

diagram

annotation

documentation Main configuration for an OpenDA application. There are three mandatory components, which make up an OpenDA application: stochModelFactory, stochObserver and algorithm. Each component is configured by specifying its className attribute, workingDirectory and configFile/configString. An optional component is available for configuring the output of the results, and optional components for defining OpenDA restart input and output files.

complexType ApplicationInitialSeedXML

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation type   openda:ApplicationInitialSeedTypesXML   required         documentation Type of seed intialisation: fixed (i.e. always the same value), random value, or specific value. In the latter case, specify the seed value. seedValue   xs:integer   optional         documentation Value of initial seed, in case of type=="specify"

attribute ApplicationInitialSeedXML/@type

annotation

documentation Type of seed intialisation: fixed (i.e. always the same value), random value, or specific value. In the latter case, specify the seed value.

attribute ApplicationInitialSeedXML/@seedValue

annotation

documentation Value of initial seed, in case of type=="specify"

complexType ApplicationOptimizationXML

diagram

attributes

Name   Type   Use   Default   Fixed   Annotation productionRun   xs:boolean   required         documentation Optimize for performance at cost of (diagnostic) output VectorPrecisionIsFloat   xs:boolean   required         documentation The storage and computation precision of the default OpenDA Vector class is float. Note this will not hava any impact on other (native) vector implementations used in OpenDA VectorIsNative   xs:boolean   required         documentation The default vector used in OpenDA (class Vector) will use a native implementation (written in C) this is faster but at the cost of easy debugging of vector operations. Note the you need to have native OpenDA libraries compiled/installed on your system. Especially for debugging, not using the OpenDA start scripts, the libraties MUST be on you path

attribute ApplicationOptimizationXML/@productionRun

annotation

documentation Optimize for performance at cost of (diagnostic) output

attribute ApplicationOptimizationXML/@VectorPrecisionIsFloat

annotation

documentation The storage and computation precision of the default OpenDA Vector class is float. Note this will not hava any impact on other (native) vector implementations used in OpenDA

attribute ApplicationOptimizationXML/@VectorIsNative

annotation

documentation The default vector used in OpenDA (class Vector) will use a native implementation (written in C) this is faster but at the cost of easy debugging of vector operations. Note the you need to have native OpenDA libraries compiled/installed on your system. Especially for debugging, not using the OpenDA start scripts, the libraties MUST be on you path

complexType ApplicationTimeXML

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation precision   xs:string   required         documentation Precision of handling time, treshold for comparing unit   xs:string   optional   sec      documentation Unit of precision supported values sec,min,hour,MJD

attribute ApplicationTimeXML/@precision

annotation

documentation Precision of handling time, treshold for comparing

attribute ApplicationTimeXML/@unit

annotation

documentation Unit of precision supported values sec,min,hour,MJD

complexType ApplicationTimingSettingsXML

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation doTiming   xs:boolean   required         documentation (should the various steps in the application be timed?

attribute ApplicationTimingSettingsXML/@doTiming

annotation

documentation (should the various steps in the application be timed?

complexType OpenDaAlgorithmXML

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation className   xs:string   required         documentation Set the openda:java class name of the algorithm

attribute OpenDaAlgorithmXML/@className

annotation

documentation Set the openda:java class name of the algorithm

element OpenDaAlgorithmXML/workingDirectory

diagram
annotation	documentation Specify the directory, relative to the main configuration directory, where the algorithm configuration files are stored

element OpenDaAlgorithmXML/configFile

diagram
annotation	documentation Specify the name of the algorithm configuration file stored in the working directory

element OpenDaAlgorithmXML/configString

diagram
annotation	documentation Specify the configuration string (whether a configFile or configString is required depends on the choice of algorithm)

complexType OpenDaApplicationXML

diagram

element OpenDaApplicationXML/stochObserver

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation className   xs:string   required         documentation Set the openda:java class name of the stochastic observer
annotation	documentation Specify the stochastic observer component

element OpenDaApplicationXML/stochModelFactory

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation className   xs:string   required         documentation Set the openda:java class name of the stochastic model.
annotation	documentation Specify the stochastic model component

element OpenDaApplicationXML/algorithm

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation className   xs:string   required         documentation Set the openda:java class name of the algorithm
annotation	documentation Specify the algorithm for data assimilation or parameter calibration

element OpenDaApplicationXML/resultWriter

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation className   xs:string   required         documentation Specify the openda class name of the result writer
annotation	documentation Specify the content and format of the results file

element OpenDaApplicationXML/resultWriters

diagram
annotation	documentation Specify the results files in case more than one format is needed

element OpenDaApplicationXML/restartInFile

diagram
annotation	documentation Specify the input file from which the algoritm should restart. If omitted, no restart file is read. A restartFile of length zero is silently ignored and can be used to ignore the restart, ie to start without a restart.

element OpenDaApplicationXML/restartOutFilePrefix

diagram
annotation	documentation Specify the prefix to be used for the output restart files to be written. If ommitted, no restart files are written.

element OpenDaApplicationXML/restartOutFileExtension

diagram
annotation	documentation Specify the file extension to be used for restart output files (default: .xml). Overrules only the extension, but not the output format chosen by Openda (could be a zip file as well). Use of this option is discouraged.

element OpenDaApplicationXML/restartOutFileTimeTag

diagram
annotation	documentation Should the restart time be added to the filename of the restart file. Default is yes. Possible values: yes, no

element OpenDaApplicationXML/restartOutFileTimes

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation timeFormat   openda:RestartFormatTypesXML   optional   dateTimeString      documentation Specify the time format: 'mjd' (Modified Julian Day) or date/time string (formatted as yyyymmddhhmm) 'dateTimeString'.
annotation	documentation Specify the time stamps for which to write restarts

element OpenDaApplicationXML/timingSettings

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation doTiming   xs:boolean   required         documentation (should the various steps in the application be timed?
annotation	documentation Specify the settings for the run time timing

element OpenDaApplicationXML/optimizationSettings

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation productionRun   xs:boolean   required         documentation Optimize for performance at cost of (diagnostic) output VectorPrecisionIsFloat   xs:boolean   required         documentation The storage and computation precision of the default OpenDA Vector class is float. Note this will not hava any impact on other (native) vector implementations used in OpenDA VectorIsNative   xs:boolean   required         documentation The default vector used in OpenDA (class Vector) will use a native implementation (written in C) this is faster but at the cost of easy debugging of vector operations. Note the you need to have native OpenDA libraries compiled/installed on your system. Especially for debugging, not using the OpenDA start scripts, the libraties MUST be on you path
annotation	documentation Specify the optimization settings

element OpenDaApplicationXML/timeSettings

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation precision   xs:string   required         documentation Precision of handling time, treshold for comparing unit   xs:string   optional   sec      documentation Unit of precision supported values sec,min,hour,MJD
annotation	documentation Specify the time settings

element OpenDaApplicationXML/initialSeed

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation type   openda:ApplicationInitialSeedTypesXML   required         documentation Type of seed intialisation: fixed (i.e. always the same value), random value, or specific value. In the latter case, specify the seed value. seedValue   xs:integer   optional         documentation Value of initial seed, in case of type=="specify"
annotation	documentation Specify the type of initial seed (if ommited, default: "fixed")

complexType OpenDaResultWritersXML

diagram

element OpenDaResultWritersXML/resultWriter

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation className   xs:string   required         documentation Specify the openda class name of the result writer
annotation	documentation Specify the content and format of the results file

complexType OpenDaResultWriterXML

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation className   xs:string   required         documentation Specify the openda class name of the result writer

attribute OpenDaResultWriterXML/@className

annotation

documentation Specify the openda class name of the result writer

element OpenDaResultWriterXML/workingDirectory

diagram
annotation	documentation Specify the working directory where the results file should be stored

element OpenDaResultWriterXML/configFile

diagram
annotation	documentation Specify the results filename

element OpenDaResultWriterXML/configString

diagram
annotation	documentation Specify the configuration string (whether a configFile or configString is required depends on the choice of resultwriter)

element OpenDaResultWriterXML/selection

diagram
annotation	documentation Specify subselection of output sources and items to be written

complexType OpenDaStochModelXML

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation className   xs:string   required         documentation Set the openda:java class name of the stochastic model.

attribute OpenDaStochModelXML/@className

annotation

documentation Set the openda:java class name of the stochastic model.

element OpenDaStochModelXML/workingDirectory

diagram
annotation	documentation Specify the directory, relative to the main configuration directory, where the stochastic model configuration files are stored

element OpenDaStochModelXML/configFile

diagram
annotation	documentation Specify the name of the stochastic model configuration file stored in the working directory

element OpenDaStochModelXML/configString

diagram
annotation	documentation Specify the configuration string (whether a configFile or configString is required depends on the choice of stochastic model)

complexType OpenDaStochObserverXML

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation className   xs:string   required         documentation Set the openda:java class name of the stochastic observer

attribute OpenDaStochObserverXML/@className

annotation

documentation Set the openda:java class name of the stochastic observer

element OpenDaStochObserverXML/workingDirectory

diagram
annotation	documentation Specify the directory, relative to the main configuration directory, where the stochastic observer configuration files are stored

element OpenDaStochObserverXML/configFile

diagram
annotation	documentation Specify the name of the stochastic observer configuration file stored in the working directory

element OpenDaStochObserverXML/configString

diagram
annotation	documentation Specify the configuration string (whether a configFile or configString is required depends on the choice of stochastic observer)

complexType RestartOutFileTimesXML

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation timeFormat   openda:RestartFormatTypesXML   optional   dateTimeString      documentation Specify the time format: 'mjd' (Modified Julian Day) or date/time string (formatted as yyyymmddhhmm) 'dateTimeString'.

attribute RestartOutFileTimesXML/@timeFormat

annotation

documentation Specify the time format: 'mjd' (Modified Julian Day) or date/time string (formatted as yyyymmddhhmm) 'dateTimeString'.

simpleType ApplicationInitialSeedTypesXML

---

simpleType RestartFormatTypesXML

---

element calibrationRestart

diagram
annotation	documentation Restart settings for an Algoritm. Generic part: params. Algorithm specific parts per algorithm

element dudRestart

diagram

element powelRestart

diagram

element simplexRestart

diagram

complexType CalibrationRestartXML

diagram

element CalibrationRestartXML/methodName

diagram

element CalibrationRestartXML/comment

diagram

element CalibrationRestartXML/dud

diagram

element CalibrationRestartXML/powell

diagram

element CalibrationRestartXML/simplex

diagram

complexType DudXML

diagram

element DudXML/params

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation id   xs:string            caption   xs:string            excludeFromVector   xs:boolean   optional         className   xs:string

element DudXML/paramVector

diagram

element DudXML/costValue

diagram

element DudXML/predictions

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation id   xs:string            caption   xs:string            excludeFromVector   xs:boolean   optional         className   xs:string

element DudXML/predictionVector

diagram

complexType PowellXML

diagram

element PowellXML/baseParams

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation id   xs:string            caption   xs:string            excludeFromVector   xs:boolean   optional         className   xs:string

element PowellXML/baseParamVector

diagram

element PowellXML/searchDirParams

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation id   xs:string            caption   xs:string            excludeFromVector   xs:boolean   optional         className   xs:string

element PowellXML/searchDirParamVector

diagram

element PowellXML/costValue

diagram

complexType SimplexXML

diagram

element SimplexXML/params

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation id   xs:string            caption   xs:string            excludeFromVector   xs:boolean   optional         className   xs:string

element SimplexXML/paramVector

diagram

element SimplexXML/costValue

diagram

simpleType MethodNameXML

---

element filterRestart

diagram
annotation	documentation Restart settings for an Algoritm. Generic part: params. Algorithm specific parts per algorithm

complexType EnsembleFiltersRestartXML

diagram

element EnsembleFiltersRestartXML/size

diagram

complexType FilterRestartXML

diagram

element FilterRestartXML/filterName

diagram

element FilterRestartXML/comment

diagram

element FilterRestartXML/ensemble

diagram

simpleType FilterNameXML

---

element opendaKalmanGainStorage

diagram
annotation	documentation Restart settings for an Algoritm. Generic part: params. Algorithm specific parts per algorithm

complexType KalmanGainObservationsXML

diagram

element KalmanGainObservationsXML/observation

diagram

complexType KalmanGainObservationXML

diagram

element KalmanGainObservationXML/id

diagram
annotation	documentation The identifier for the observation (unique with the list of stored observations)

element KalmanGainObservationXML/timeOffsetInDays

diagram
annotation	documentation The time offset of the observation, expressed in days, relative to the time stamp for this kalman gain (0 means: same time stamp as the gain, negative means before the kalman gain time stamp)

element KalmanGainObservationXML/vector

diagram
annotation	documentation The values of the kalman gain for this observation. This optional field is only present if the size is limited (default max 40 values; this maximum can be overridden by the filter)

element KalmanGainObservationXML/treeVector

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation id   xs:string            caption   xs:string            excludeFromVector   xs:boolean   optional         className   xs:string
annotation	documentation The values of the kalman gain for this observation, represented as tree vector. Present if the size is limited (see above)

element KalmanGainObservationXML/fileName

diagram
annotation	documentation The netCdfFile containing the values. This optional field is present if the gain is at TreeVector, or if there are more values than the maximum mentioned above

complexType KalmanGainStorageXML

diagram

element KalmanGainStorageXML/comment

diagram
annotation	documentation Optional comment on the stored kalman gain

element KalmanGainStorageXML/timeStampAsMJD

diagram
annotation	documentation The time stamp for which the kalman gain is valid, represented as Modified Julian Day

element KalmanGainStorageXML/stateSize

diagram

element KalmanGainStorageXML/timeStampAsDateTime

diagram
annotation	documentation The time step mentioned above, represented as Date Time

element KalmanGainStorageXML/observations

diagram

element blackBoxStochModel

diagram

annotation

documentation Configuration file for the Stochastic model class org.openda.blackbox.wrapper.BBStochModelFactory. Specifies either the deterministic model in the modelConfig element, or the model instances generator in the modelFactory element, and the stochastic model that acts as umbrella over the deterministic model, in the vectorSpecification element, and an optional restartInfo element for non-default handling of deterministic model restarts. The element uncertaintyModule is included for backwards compatibility only.

complexType BlackBoxModelConfigReferenceXML

diagram

element BlackBoxModelConfigReferenceXML/config

diagram
annotation	documentation Specify black box model configuration directly in the blackBoxModelConfig format

element BlackBoxModelConfigReferenceXML/file

diagram
annotation	documentation Specify filename of the black box model configuration file. File format: blackBoxModelConfig

complexType BlackBoxStochModelConfigXML

diagram

element BlackBoxStochModelConfigXML/modelConfig

diagram
annotation	documentation Specify a specific black box model configuration. This can be either by writing directly the model configuration or by referring to a black box model configuration file.

element BlackBoxStochModelConfigXML/modelFactory

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation exe   xs:string   optional         documentation Name and path of the executable file windowsExe   xs:string   optional         documentation Name and path of the executable file for Windows operating system linuxExe   xs:string   optional         documentation Name and path of the executable file for Linux operating system macExe   xs:string   optional         documentation Name and path of the executable file for Mac operating system className   xs:string   optional         documentation The openda:class name. workingDirectory   xs:string   optional         documentation Directory where executable file is run. This is usually the instance dir. This is only used in blackBoxStochModelConfig. actualWorkingDirectory   xs:string   optional         documentation Subdirectory of instance dir, where executable file has to be run. To be specified as relative path to instance dir. This is only used in blackBoxWrapperConfig. This is only used for executable files, not for Java classes. For Java classes the instanceDir is used as workingDirectory. ignoreStatus   xs:boolean   optional   false      documentation Flag for ignoring the status of the previous action step (ignoreStatus=true). Not yet implemented.
annotation	documentation Define a model factory. Specify class or executable, arguments to supply and fail/success checks to perform

element BlackBoxStochModelConfigXML/uncertaintyModule

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation exe   xs:string   optional         documentation Name and path of the executable file windowsExe   xs:string   optional         documentation Name and path of the executable file for Windows operating system linuxExe   xs:string   optional         documentation Name and path of the executable file for Linux operating system macExe   xs:string   optional         documentation Name and path of the executable file for Mac operating system className   xs:string   optional         documentation The openda:class name. workingDirectory   xs:string   optional         documentation Directory where executable file is run. This is usually the instance dir. This is only used in blackBoxStochModelConfig. actualWorkingDirectory   xs:string   optional         documentation Subdirectory of instance dir, where executable file has to be run. To be specified as relative path to instance dir. This is only used in blackBoxWrapperConfig. This is only used for executable files, not for Java classes. For Java classes the instanceDir is used as workingDirectory. ignoreStatus   xs:boolean   optional   false      documentation Flag for ignoring the status of the previous action step (ignoreStatus=true). Not yet implemented.
annotation	documentation DEPRECATED. Use of this element is discouraged, use vectorSpecification -> parameters -> uncertaintyModule instead. Define stochastic model through an uncertainty module. Specify class or executable file, arguments to supply and fail/success checks to perform.

element BlackBoxStochModelConfigXML/rangeValidationConfigFile

diagram
annotation	documentation Optional. Path and name of a range validation config file (relative to this configuration file) that contains range validation constraints for exchange items.

element BlackBoxStochModelConfigXML/boundaryProvider

diagram
annotation	documentation Specify external forcings, being either boundaries, noise on boundaries or boundaries including noise.

element BlackBoxStochModelConfigXML/vectorSpecification

diagram
annotation	documentation Define stochastic model by specifying the vectors of parameters, state, and/or predictor

element BlackBoxStochModelConfigXML/restartInfo

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation dirPrefix   xs:string   optional   ./savedStochModelState_      documentation Specify the model directory that will contain a set of restart files for a certain time stamp (written when the algorithm requests to store states, read when the algorithm asks to restore a state) noiseModelPrefix   xs:string   optional   ./noiseModel_      documentation Specify the file name prefix for storing the state of the noise model(s) modelStateFile   xs:string   optional   ./modelState.zip      documentation Specify the file name prefix for storing the model state (must end with .zip)
annotation	documentation Restart dir./files information

complexType BlackBoxStochModelParametersXML

diagram

element BlackBoxStochModelParametersXML/uncertaintyModule

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation className   xs:string            documentation The class name implementing the noise model workingDirectory   xs:string   optional         documentation The noise model's working directory
annotation	documentation The uncertainty module that defines and generates the noise correction factor exchange items

element BlackBoxStochModelParametersXML/regularisationConstant

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation scale   xs:double   optional   1      documentation Set the scaling factor for this parameter (optional) id   xs:string   optional         documentation Optional id for composed items that are all modified by the same parameter. If omitted, the id's of the separate item will be concatenated. Note: the (concatenated) id is mainly used by the sparse dud algorithm
annotation	documentation Specify which model parameters to adjust and how

element BlackBoxStochModelParametersXML/cartesianToPolar

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation xScale   xs:double   optional   1      documentation Scaling factor for dx yScale   xs:double   optional   1      documentation Scaling factor for dy xSuffixCaption   xs:string   optional   dX      documentation Name suffix for dx in the noise model exchange items ySuffixCaption   xs:string   optional   dY      documentation Name suffix for dy in the noise model exchange items xCaption   xs:string   optional         documentation Name for dx in the noise model exchange items yCaption   xs:string   optional         documentation Name for dy in the noise model exchange items
annotation	documentation Specify which model parameters to adjust and how, under a transformation of the vector representation, from Cartesian (dx,dy) to Polar (amplitude,phase)

complexType BlackBoxStochModelRestartInfoXML

diagram

attributes

Name   Type   Use   Default   Fixed   Annotation dirPrefix   xs:string   optional   ./savedStochModelState_      documentation Specify the model directory that will contain a set of restart files for a certain time stamp (written when the algorithm requests to store states, read when the algorithm asks to restore a state) noiseModelPrefix   xs:string   optional   ./noiseModel_      documentation Specify the file name prefix for storing the state of the noise model(s) modelStateFile   xs:string   optional   ./modelState.zip      documentation Specify the file name prefix for storing the model state (must end with .zip)

attribute BlackBoxStochModelRestartInfoXML/@dirPrefix

annotation

documentation Specify the model directory that will contain a set of restart files for a certain time stamp (written when the algorithm requests to store states, read when the algorithm asks to restore a state)

attribute BlackBoxStochModelRestartInfoXML/@noiseModelPrefix

annotation

documentation Specify the file name prefix for storing the state of the noise model(s)

attribute BlackBoxStochModelRestartInfoXML/@modelStateFile

annotation

documentation Specify the file name prefix for storing the model state (must end with .zip)

complexType BlackBoxStochModelStateXML

diagram

element BlackBoxStochModelStateXML/noiseModel

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation id   xs:string   optional         documentation Specify the identity of the noise model vector. It is required if the noise model contains more than one source vectors. If the noise model contains one subvector, it may be omitted. In that case the source (sub-)vector's id is used. className   xs:string   optional         documentation The class that implements the noise model workingDirectory   xs:string   optional         documentation The working directory where the noise model is started
annotation	documentation Add a noise model to the state

element BlackBoxStochModelStateXML/vector

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation id   xs:string   required         documentation Identity of the vector sourceVectorId   xs:string   optional         documentation Identity of the source vector as defined in blackBoxModelConfig
annotation	documentation Add a vector to the state

element BlackBoxStochModelStateXML/subVector

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation id   xs:string   required         documentation Identity of the subVector sourceVectorId   xs:string   optional         documentation Identity of the source vector as defined in blackBoxModelConfig
annotation	documentation Add a subvector to the state

complexType BlackBoxStochModelSubVectorXML

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation id   xs:string   required         documentation Identity of the subVector sourceVectorId   xs:string   optional         documentation Identity of the source vector as defined in blackBoxModelConfig

attribute BlackBoxStochModelSubVectorXML/@id

annotation

documentation Identity of the subVector

attribute BlackBoxStochModelSubVectorXML/@sourceVectorId

annotation

documentation Identity of the source vector as defined in blackBoxModelConfig

element BlackBoxStochModelSubVectorXML/selection

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation index1   openda:indexStringType   required         documentation Indices of the selected array elements of the first dimension. Format:  "ind1" (single index)," ind1:" (from ind1 up to the last index), ":ind1" (from the first index up to ind1), "ind1:ind2" (from ind1 up to ind2). Example: 8, :4, 19:, 7:12. index2   openda:indexStringType   optional         documentation Indices of the selected array elements of the second dimension. Format:  "ind1" (single index)," ind1:" (from ind1 up to the last index), ":ind1" (from the first index up to ind1), "ind1:ind2" (from ind1 up to ind2). Example: 8, :4, 19:, 7:12. index3   openda:indexStringType   optional         documentation Indices of the selected array elements of the third dimension. Format:  "ind1" (single index)," ind1:" (from ind1 up to the last index), ":ind1" (from the first index up to ind1), "ind1:ind2" (from ind1 up to ind2). Example: 8, :4, 19:, 7:12. base   xs:int   optional   0      documentation Base number, which gives the index of the vector's first element (sometimes 1 instead of 0)
annotation	documentation Select subvector using indices of the vector elements

element BlackBoxStochModelSubVectorXML/selector

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation className   xs:string   required         documentation Specify the openda:class name for performing this operation
annotation	documentation Define operator for deriving the subvector

complexType BlackBoxStochModelUncertainParameterXML

diagram

attributes

Name   Type   Use   Default   Fixed   Annotation id   xs:string   optional         documentation Identity of model's exchange item uncertainItemId   xs:string   optional         documentation Identity of noise model's exchange item transformation   openda:ParameterTransformationTypesXML   optional   identity      documentation Transformation of noise variable. 'identity' means that the value will be added directly  without any transformation to the adjusted parameter. 'ln' means that the value is transformed logarithmically before it is added to the parameter; this gives a correction, which is a fraction of the parameter value.

attribute BlackBoxStochModelUncertainParameterXML/@id

annotation

documentation Identity of model's exchange item

attribute BlackBoxStochModelUncertainParameterXML/@uncertainItemId

annotation

documentation Identity of noise model's exchange item

attribute BlackBoxStochModelUncertainParameterXML/@transformation

annotation

documentation Transformation of noise variable. 'identity' means that the value will be added directly  without any transformation to the adjusted parameter. 'ln' means that the value is transformed logarithmically before it is added to the parameter; this gives a correction, which is a fraction of the parameter value.

complexType BlackBoxStochModelVectorSpecificationXML

diagram

element BlackBoxStochModelVectorSpecificationXML/parameters

diagram
annotation	documentation Specify the model parameters vectors

element BlackBoxStochModelVectorSpecificationXML/state

diagram
annotation	documentation Specify the model state vectors

element BlackBoxStochModelVectorSpecificationXML/predictor

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation collectTimeSeries   xs:boolean      false      documentation A flag for indicating whether predictor timeseries should be kept in the memory during simulation.
annotation	documentation Specify the predictor vectors. i.e. the model variables that correspond to the observer variables. This can contain three different types of mappings between model and observer variables: 1. a vector for a mapping between an observed scalar and a scalar in the model. In this case the coordinates are not used and no interpolation is done. 2. a vector for a mapping between an observed grid and a grid in the model. In this case the model values are interpolated to get values at the cell centers of the observed grid. This uses the coordinates of both grids and bilinear interpolation. 3. a subVector for a mapping between an observed scalar and a cell of a grid in the model. In this case the coordinates are not used and no interpolation is done.

complexType BlackBoxStochModelVectorsXML

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation collectTimeSeries   xs:boolean      false      documentation A flag for indicating whether predictor timeseries should be kept in the memory during simulation.

attribute BlackBoxStochModelVectorsXML/@collectTimeSeries

annotation

documentation A flag for indicating whether predictor timeseries should be kept in the memory during simulation.

element BlackBoxStochModelVectorsXML/vector

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation id   xs:string   required         documentation Identity of the vector sourceVectorId   xs:string   optional         documentation Identity of the source vector as defined in blackBoxModelConfig
annotation	documentation Add a vector to the predictor

element BlackBoxStochModelVectorsXML/subVector

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation id   xs:string   required         documentation Identity of the subVector sourceVectorId   xs:string   optional         documentation Identity of the source vector as defined in blackBoxModelConfig
annotation	documentation Add a subvector to the predictor

complexType BlackBoxStochModelVectorXML

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation id   xs:string   required         documentation Identity of the vector sourceVectorId   xs:string   optional         documentation Identity of the source vector as defined in blackBoxModelConfig

attribute BlackBoxStochModelVectorXML/@id

annotation

documentation Identity of the vector

attribute BlackBoxStochModelVectorXML/@sourceVectorId

annotation

documentation Identity of the source vector as defined in blackBoxModelConfig

complexType BoundaryDataObjectXML

diagram

element BoundaryDataObjectXML/className

diagram
annotation	documentation The openda class name of the forcing's data object.

element BoundaryDataObjectXML/file

diagram
annotation	documentation Name of the forcing's data file.

element BoundaryDataObjectXML/arg

diagram
annotation	documentation Input argument(s) for the corresponding openda:class

complexType BoundaryExchangeItemXML

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation id   xs:string   required         documentation Identity of a forcing ExchangeItem. modelExchangeItemId   xs:string   optional         documentation Identity of the model ExchangeItem on which to impose this forcing ExchangeItem. If the model ExchangeItem id equals the id of the forcing ExchangeItem, then this attribute is not needed.

attribute BoundaryExchangeItemXML/@id

annotation

documentation Identity of a forcing ExchangeItem.

attribute BoundaryExchangeItemXML/@modelExchangeItemId

annotation

documentation Identity of the model ExchangeItem on which to impose this forcing ExchangeItem. If the model ExchangeItem id equals the id of the forcing ExchangeItem, then this attribute is not needed.

complexType BoundaryMappingXML

diagram

element BoundaryMappingXML/operation

diagram
annotation	documentation (set): Replace model ExchangeItem's content by forcing ExchangeItem's content. (add): Add the forcing ExchangeItem's content to the model ExchangeItem's content. (multiply): Multiply the model ExchangeItem's content by the forcing ExchangeItem's content.

element BoundaryMappingXML/exchangeItem

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation id   xs:string   required         documentation Identity of a forcing ExchangeItem. modelExchangeItemId   xs:string   optional         documentation Identity of the model ExchangeItem on which to impose this forcing ExchangeItem. If the model ExchangeItem id equals the id of the forcing ExchangeItem, then this attribute is not needed.
annotation	documentation List the forcing ExchangeItems for which to apply this mapping's operation. If this list is not specified, then the specified operation will be used for all forcing ExchangeItems from the specified file (in that case the model ExchangeItems must have the same ids as the forcing ExchangeItems).

complexType BoundaryProviderXML

diagram

element BoundaryProviderXML/dataObject

diagram
annotation	documentation The data object containing the forcing data.

element BoundaryProviderXML/boundaryMapping

diagram
annotation	documentation Specify the operation when imposing the forcing ExchangeItems on the model ExchangeItems.

complexType CartesianToPolarXML

diagram

attributes

Name   Type   Use   Default   Fixed   Annotation xScale   xs:double   optional   1      documentation Scaling factor for dx yScale   xs:double   optional   1      documentation Scaling factor for dy xSuffixCaption   xs:string   optional   dX      documentation Name suffix for dx in the noise model exchange items ySuffixCaption   xs:string   optional   dY      documentation Name suffix for dy in the noise model exchange items xCaption   xs:string   optional         documentation Name for dx in the noise model exchange items yCaption   xs:string   optional         documentation Name for dy in the noise model exchange items

attribute CartesianToPolarXML/@xScale

annotation

documentation Scaling factor for dx

attribute CartesianToPolarXML/@yScale

annotation

documentation Scaling factor for dy

attribute CartesianToPolarXML/@xSuffixCaption

annotation

documentation Name suffix for dx in the noise model exchange items

attribute CartesianToPolarXML/@ySuffixCaption

annotation

documentation Name suffix for dy in the noise model exchange items

attribute CartesianToPolarXML/@xCaption

annotation

documentation Name for dx in the noise model exchange items

attribute CartesianToPolarXML/@yCaption

annotation

documentation Name for dy in the noise model exchange items

element CartesianToPolarXML/stdDev

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation value   xs:double   required         documentation The standard deviation value initial   xs:double   optional   0      documentation Set the initial value of this parameter (optional) transformation   openda:ParameterTransformationTypesXML   optional   identity      documentation Transformation of correction factor. 'identity' means that the correction will be added directly  without any transformation to the adjusted parameter. 'ln' means that the correction is transformed logarithmically before it is added to the parameter; this gives a correction, which is a fraction of the parameter value. 'set' will set the correction directly as the parameter value
annotation	documentation Specify standard deviation for dx and dy                                                                             Set the standard deviation of this parameter and the method how the parameter should be corrected

element CartesianToPolarXML/vector

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation id   xs:string   required         documentation Identity of the vector sourceVectorId   xs:string   optional         documentation Identity of the source vector as defined in blackBoxModelConfig
annotation	documentation Select whole parameter vector

element CartesianToPolarXML/subVector

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation id   xs:string   required         documentation Identity of the subVector sourceVectorId   xs:string   optional         documentation Identity of the source vector as defined in blackBoxModelConfig
annotation	documentation Select only a part of the parameter vector

complexType RegularisationConstantXML

diagram

attributes

Name   Type   Use   Default   Fixed   Annotation scale   xs:double   optional   1      documentation Set the scaling factor for this parameter (optional) id   xs:string   optional         documentation Optional id for composed items that are all modified by the same parameter. If omitted, the id's of the separate item will be concatenated. Note: the (concatenated) id is mainly used by the sparse dud algorithm

attribute RegularisationConstantXML/@scale

annotation

documentation Set the scaling factor for this parameter (optional)

attribute RegularisationConstantXML/@id

annotation

documentation Optional id for composed items that are all modified by the same parameter. If omitted, the id's of the separate item will be concatenated. Note: the (concatenated) id is mainly used by the sparse dud algorithm

element RegularisationConstantXML/stdDev

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation value   xs:double   required         documentation The standard deviation value initial   xs:double   optional   0      documentation Set the initial value of this parameter (optional) transformation   openda:ParameterTransformationTypesXML   optional   identity      documentation Transformation of correction factor. 'identity' means that the correction will be added directly  without any transformation to the adjusted parameter. 'ln' means that the correction is transformed logarithmically before it is added to the parameter; this gives a correction, which is a fraction of the parameter value. 'set' will set the correction directly as the parameter value
annotation	documentation Set the standard deviation of this parameter and the method how the parameter should be corrected

element RegularisationConstantXML/uncertainItem

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation id   xs:string   optional         documentation Identity of model's exchange item uncertainItemId   xs:string   optional         documentation Identity of noise model's exchange item transformation   openda:ParameterTransformationTypesXML   optional   identity      documentation Transformation of noise variable. 'identity' means that the value will be added directly  without any transformation to the adjusted parameter. 'ln' means that the value is transformed logarithmically before it is added to the parameter; this gives a correction, which is a fraction of the parameter value.
annotation	documentation The uncertainy of this parameter is specified in the uncertaintyModule mentioned in the top of the present stochastic model configuration

element RegularisationConstantXML/vector

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation id   xs:string   required         documentation Identity of the vector sourceVectorId   xs:string   optional         documentation Identity of the source vector as defined in blackBoxModelConfig
annotation	documentation Select the whole parameter vector

element RegularisationConstantXML/subVector

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation id   xs:string   required         documentation Identity of the subVector sourceVectorId   xs:string   optional         documentation Identity of the source vector as defined in blackBoxModelConfig
annotation	documentation Select only a part of the parameter vector

complexType StandardDeviationAndTransformationXML

diagram

attributes

Name   Type   Use   Default   Fixed   Annotation value   xs:double   required         documentation The standard deviation value initial   xs:double   optional   0      documentation Set the initial value of this parameter (optional) transformation   openda:ParameterTransformationTypesXML   optional   identity      documentation Transformation of correction factor. 'identity' means that the correction will be added directly  without any transformation to the adjusted parameter. 'ln' means that the correction is transformed logarithmically before it is added to the parameter; this gives a correction, which is a fraction of the parameter value. 'set' will set the correction directly as the parameter value

attribute StandardDeviationAndTransformationXML/@value

annotation

documentation The standard deviation value

attribute StandardDeviationAndTransformationXML/@initial

annotation

documentation Set the initial value of this parameter (optional)

attribute StandardDeviationAndTransformationXML/@transformation

annotation

documentation Transformation of correction factor. 'identity' means that the correction will be added directly  without any transformation to the adjusted parameter. 'ln' means that the correction is transformed logarithmically before it is added to the parameter; this gives a correction, which is a fraction of the parameter value. 'set' will set the correction directly as the parameter value

complexType StandardDeviationXML

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation value   xs:double   required         documentation The standard deviation value

attribute StandardDeviationXML/@value

annotation

documentation The standard deviation value

complexType StateNoiseAr1ModelXML

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation operation   openda:NoiseOperationTypesXML   optional   add      documentation Operation type: add (default) or multiply

attribute StateNoiseAr1ModelXML/@operation

annotation

documentation Operation type: add (default) or multiply

element StateNoiseAr1ModelXML/stdDevColouredNoised

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation value   xs:double   required         documentation The standard deviation value
annotation	documentation The standard deviation of the coloured noise to be generated by the model.

element StateNoiseAr1ModelXML/decorrelationTimeScale

diagram
annotation	documentation Decorrelation time.

element StateNoiseAr1ModelXML/noiseModelPeriod

diagram

complexType StateNoiseArmaModelXML

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation operation   openda:NoiseOperationTypesXML   optional   add      documentation Operation type: add (default) or multiply

attribute StateNoiseArmaModelXML/@operation

annotation

documentation Operation type: add (default) or multiply

element StateNoiseArmaModelXML/stdDev

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation value   xs:double   required         documentation The standard deviation value

element StateNoiseArmaModelXML/armaConstant

diagram
annotation	documentation ARMA constants, which reflects temporal correlation per timestep of the ARMA model.

complexType StateNoiseUncertainItemWithArmaConstantsXML

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation uncertainItemId   xs:string   optional         documentation Identity of the uncertain item as defined in BB model configuration file. operation   openda:NoiseOperationTypesXML   optional   add      documentation Operation type: add (default), multiply or set

attribute StateNoiseUncertainItemWithArmaConstantsXML/@uncertainItemId

annotation

documentation Identity of the uncertain item as defined in BB model configuration file.

attribute StateNoiseUncertainItemWithArmaConstantsXML/@operation

annotation

documentation Operation type: add (default), multiply or set

element StateNoiseUncertainItemWithArmaConstantsXML/armaConstant

diagram
annotation	documentation ARMA constants, which reflects temporal correlation per timestep of the ARMA model.

complexType StateNoiseUncertainItemXML

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation uncertainItemId   xs:string   optional         documentation Identity of the uncertain item as defined in BB model configuration file. operation   openda:NoiseOperationTypesXML   optional   add      documentation Operation type: add (default), multiply or set

attribute StateNoiseUncertainItemXML/@uncertainItemId

annotation

documentation Identity of the uncertain item as defined in BB model configuration file.

attribute StateNoiseUncertainItemXML/@operation

annotation

documentation Operation type: add (default), multiply or set

complexType StateNoiseXML

diagram

attributes

Name   Type   Use   Default   Fixed   Annotation id   xs:string   optional         documentation Specify the identity of the noise model vector. It is required if the noise model contains more than one source vectors. If the noise model contains one subvector, it may be omitted. In that case the source (sub-)vector's id is used. className   xs:string   optional         documentation The class that implements the noise model workingDirectory   xs:string   optional         documentation The working directory where the noise model is started

attribute StateNoiseXML/@id

annotation

documentation Specify the identity of the noise model vector. It is required if the noise model contains more than one source vectors. If the noise model contains one subvector, it may be omitted. In that case the source (sub-)vector's id is used.

attribute StateNoiseXML/@className

annotation

documentation The class that implements the noise model

attribute StateNoiseXML/@workingDirectory

annotation

documentation The working directory where the noise model is started

element StateNoiseXML/configFile

diagram
annotation	documentation Specify name of xml file containing configuration of the noise model. File format depends on class.

element StateNoiseXML/exchangeItems

diagram
annotation	documentation The relations between the noise model's  exchange items and the model's exchange items

element StateNoiseXML/vector

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation id   xs:string   required         documentation Identity of the vector sourceVectorId   xs:string   optional         documentation Identity of the source vector as defined in blackBoxModelConfig
annotation	documentation The model's vector that the noise will be added to.

element StateNoiseXML/subVector

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation id   xs:string   required         documentation Identity of the subVector sourceVectorId   xs:string   optional         documentation Identity of the source vector as defined in blackBoxModelConfig
annotation	documentation The model's vector that the noise will be added to.

element StateNoiseXML/uncertainItem

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation uncertainItemId   xs:string   optional         documentation Identity of the uncertain item as defined in BB model configuration file. operation   openda:NoiseOperationTypesXML   optional   add      documentation Operation type: add (default), multiply or set
annotation	documentation The noise model is fully specified in the uncertainty module

element StateNoiseXML/uncertainItemWithArmaConstants

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation uncertainItemId   xs:string   optional         documentation Identity of the uncertain item as defined in BB model configuration file. operation   openda:NoiseOperationTypesXML   optional   add      documentation Operation type: add (default), multiply or set
annotation	documentation The PDF of the noise model is specified in the uncertainty module, the ARMA constants are specified here

element StateNoiseXML/armaModel

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation operation   openda:NoiseOperationTypesXML   optional   add      documentation Operation type: add (default) or multiply
annotation	documentation Both the noise model's PDF (normal distribution) and the ARMA constants are specified here

element StateNoiseXML/ar1Model

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation operation   openda:NoiseOperationTypesXML   optional   add      documentation Operation type: add (default) or multiply
annotation	documentation The standard deviation and the decoralation time scale of the AR1 model is specified

complexType UncertaintyOrModelExchangeItemXML

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation id   xs:string   required         documentation Set the identity of this subVector. sourceVectorId   xs:string   optional         documentation Specify the identity of the source vector as defined in blackBoxModelConfig.

attribute UncertaintyOrModelExchangeItemXML/@id

annotation

documentation Set the identity of this subVector.

attribute UncertaintyOrModelExchangeItemXML/@sourceVectorId

annotation

documentation Specify the identity of the source vector as defined in blackBoxModelConfig.

element UncertaintyOrModelExchangeItemXML/selection

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation index1   openda:indexStringType   required         documentation Indices of the selected array elements of the first dimension. Format:  "ind1" (single index)," ind1:" (from ind1 up to the last index), ":ind1" (from the first index up to ind1), "ind1:ind2" (from ind1 up to ind2). Example: 8, :4, 19:, 7:12. index2   openda:indexStringType   optional         documentation Indices of the selected array elements of the second dimension. Format:  "ind1" (single index)," ind1:" (from ind1 up to the last index), ":ind1" (from the first index up to ind1), "ind1:ind2" (from ind1 up to ind2). Example: 8, :4, 19:, 7:12. index3   openda:indexStringType   optional         documentation Indices of the selected array elements of the third dimension. Format:  "ind1" (single index)," ind1:" (from ind1 up to the last index), ":ind1" (from the first index up to ind1), "ind1:ind2" (from ind1 up to ind2). Example: 8, :4, 19:, 7:12. base   xs:int   optional   0      documentation Base number, which gives the index of the vector's first element (sometimes 1 instead of 0)
annotation	documentation Derive subvector by specifying indices of source vector.

element UncertaintyOrModelExchangeItemXML/selector

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation className   xs:string   required         documentation Specify the openda:class name for performing this operation
annotation	documentation Derive subvector by using a configuration file or string.

complexType UncertaintyOrNoiseExchangeItemsXML

diagram

element UncertaintyOrNoiseExchangeItemsXML/exchangeItem

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation id   xs:string   required         documentation Identity of this noise model's exchange item modelExchangeItemId   xs:string   optional         documentation Identity of model's exchange item on which to impose this noise model's exchange item operation   openda:NoiseOperationTypesXML   optional   add      documentation Deprecated, use attribute "transformation" instead. Type of operation to performed when noise is added to an (parameter or state) exchange item: 'add' the noise to the exchange item's values, 'multiply' the exchange item's values with the noise, or 'set' the values (used in those cases where the noise in fact is a realization). transformation   openda:ParameterTransformationTypesXML   optional   identity      documentation Transformation of noise variable. 'identity' means that the value will be added directly  without any transformation to the adjusted parameter. 'ln' means that the value is transformed logarithmically before it is added to the parameter; this gives a correction, which is a fraction of the parameter value. skipFirstTimeStep   xs:boolean   optional   false      documentation When adding noise to a time dependent exchange item for the next (e.g. EnKF) time slice, skip the first time step (because is was already modified in the previous time slice) addOnlyNoiseDifference   xs:boolean   optional   false      documentation When adding noise to a state exchange time, add the difference between the current noise and the previous noise, instead of adding the full noise.
annotation	documentation The list of relations

complexType UncertaintyOrNoiseExchangeItemXML

diagram

attributes

Name   Type   Use   Default   Fixed   Annotation id   xs:string   required         documentation Identity of this noise model's exchange item modelExchangeItemId   xs:string   optional         documentation Identity of model's exchange item on which to impose this noise model's exchange item operation   openda:NoiseOperationTypesXML   optional   add      documentation Deprecated, use attribute "transformation" instead. Type of operation to performed when noise is added to an (parameter or state) exchange item: 'add' the noise to the exchange item's values, 'multiply' the exchange item's values with the noise, or 'set' the values (used in those cases where the noise in fact is a realization). transformation   openda:ParameterTransformationTypesXML   optional   identity      documentation Transformation of noise variable. 'identity' means that the value will be added directly  without any transformation to the adjusted parameter. 'ln' means that the value is transformed logarithmically before it is added to the parameter; this gives a correction, which is a fraction of the parameter value. skipFirstTimeStep   xs:boolean   optional   false      documentation When adding noise to a time dependent exchange item for the next (e.g. EnKF) time slice, skip the first time step (because is was already modified in the previous time slice) addOnlyNoiseDifference   xs:boolean   optional   false      documentation When adding noise to a state exchange time, add the difference between the current noise and the previous noise, instead of adding the full noise.

attribute UncertaintyOrNoiseExchangeItemXML/@id

annotation

documentation Identity of this noise model's exchange item

attribute UncertaintyOrNoiseExchangeItemXML/@modelExchangeItemId

annotation

documentation Identity of model's exchange item on which to impose this noise model's exchange item

attribute UncertaintyOrNoiseExchangeItemXML/@operation

annotation

documentation Deprecated, use attribute "transformation" instead. Type of operation to performed when noise is added to an (parameter or state) exchange item: 'add' the noise to the exchange item's values, 'multiply' the exchange item's values with the noise, or 'set' the values (used in those cases where the noise in fact is a realization).

attribute UncertaintyOrNoiseExchangeItemXML/@transformation

annotation

documentation Transformation of noise variable. 'identity' means that the value will be added directly  without any transformation to the adjusted parameter. 'ln' means that the value is transformed logarithmically before it is added to the parameter; this gives a correction, which is a fraction of the parameter value.

attribute UncertaintyOrNoiseExchangeItemXML/@skipFirstTimeStep

annotation

documentation When adding noise to a time dependent exchange item for the next (e.g. EnKF) time slice, skip the first time step (because is was already modified in the previous time slice)

attribute UncertaintyOrNoiseExchangeItemXML/@addOnlyNoiseDifference

annotation

documentation When adding noise to a state exchange time, add the difference between the current noise and the previous noise, instead of adding the full noise.

element UncertaintyOrNoiseExchangeItemXML/modelExchangeItem

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation id   xs:string   required         documentation Identity of model's exchange item
annotation	documentation Specify one or more model exchange items on which to impose noise defined by this noise model's exchange item (for a single model ExchangeItem, use modelExchangeItemId in the attributes instead of this list)

complexType UncertaintyOrNoiseModelExchangeItemXML

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation id   xs:string   required         documentation Identity of model's exchange item

attribute UncertaintyOrNoiseModelExchangeItemXML/@id

annotation

documentation Identity of model's exchange item

complexType UncertaintyOrNoiseXML

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation className   xs:string            documentation The class name implementing the noise model workingDirectory   xs:string   optional         documentation The noise model's working directory

attribute UncertaintyOrNoiseXML/@className

annotation

documentation The class name implementing the noise model

attribute UncertaintyOrNoiseXML/@workingDirectory

annotation

documentation The noise model's working directory

element UncertaintyOrNoiseXML/configFile

diagram
annotation	documentation Specify name of xml file containing configuration of the noise model. File format depends on class.

element UncertaintyOrNoiseXML/arg

diagram
annotation	documentation Specify list of input arguments for the noise model

element UncertaintyOrNoiseXML/exchangeItems

diagram
annotation	documentation The relations between the noise model's  exchange items and the model's exchange items

simpleType NoiseOperationTypesXML

annotation

documentation Type of operation to performed when noise is added to an (parameter or state) exchange item: add the noise to the exchange item's values, multiply the exchange item's values with the noise, or set the values (used in those cases where the noise in fact is a realization)

simpleType ParameterTransformationTypesXML

annotation

documentation Tranformation of correction factor. Two values are possible: 'identity' and 'ln'. The 'identity' means that the correction will be added directly  without any transformation to the adjusted parameter. On the other hand,  'ln' means that correction is transformed logarithmically before it is added to the parameter; this gives a correction, which is a fraction of the parameter value.

element blackBoxTemplateConfig

diagram
annotation	documentation Configuration of a black box template object. It contains of three main components: key definitions, file definitions, and valueFile definition.

complexType BlackBoxTemplateConfigXML

diagram

element BlackBoxTemplateConfigXML/keyDefinitions

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation defaultKeyPrefix   xs:string   optional         documentation Specify the default prefix for the alias keys. defaultKeySuffix   xs:string   optional         documentation Specify the default suffix for the alias keys.
annotation	documentation Define keys which need to be substituted by valiues in the template files. Specify the prefix and suffix for the keys.

element BlackBoxTemplateConfigXML/files

diagram
annotation	documentation Specify the files with template definitions.

element BlackBoxTemplateConfigXML/valuesFile

diagram
annotation	documentation Specify the file containing the KEY and VALUE pairs.

complexType BlackBoxTemplateFilesXML

diagram

element BlackBoxTemplateFilesXML/file

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation templateFile   xs:string   required         documentation Name of the template file. targetFile   xs:string   required         documentation Name of the target file.
annotation	documentation Specify the file definitions where KEY strings need to be replaced by values. Specify template file and target file.

complexType TemplateFileKeysXML

diagram

element TemplateFileKeysXML/keyId

diagram
annotation	documentation Specify the id of the key defined in the keyDefinitions section.

complexType TemplateFileXML

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation templateFile   xs:string   required         documentation Name of the template file. targetFile   xs:string   required         documentation Name of the target file.

attribute TemplateFileXML/@templateFile

annotation

documentation Name of the template file.

attribute TemplateFileXML/@targetFile

annotation

documentation Name of the target file.

element TemplateFileXML/keys

diagram
annotation	documentation Specify list of keys to be replaced in the templateFile.

complexType TemplateKeyDefinitionsXML

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation defaultKeyPrefix   xs:string   optional         documentation Specify the default prefix for the alias keys. defaultKeySuffix   xs:string   optional         documentation Specify the default suffix for the alias keys.

attribute TemplateKeyDefinitionsXML/@defaultKeyPrefix

annotation

documentation Specify the default prefix for the alias keys.

attribute TemplateKeyDefinitionsXML/@defaultKeySuffix

annotation

documentation Specify the default suffix for the alias keys.

element TemplateKeyDefinitionsXML/key

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation id   xs:string   required         documentation The id to be referred to by the alias. name   xs:string   required         documentation The name to be associated with the aliased key. targetType   xs:string   optional   org.openda.blackbox.config.KeyTypeString      documentation The data type to which the alias key will be replaced (default String). keyPrefix   xs:string   optional         documentation Specify the prefix for the alias key. keySuffix   xs:string   optional         documentation Specify the suffix for the alias key.
annotation	documentation Create list of keys, stating their id, name and targetType. The id is to be used in the file definition section. The name is the "KEY" - string to be placed in the template file.

complexType TemplateKeyDefinitionXML

diagram

attributes

Name   Type   Use   Default   Fixed   Annotation id   xs:string   required         documentation The id to be referred to by the alias. name   xs:string   required         documentation The name to be associated with the aliased key. targetType   xs:string   optional   org.openda.blackbox.config.KeyTypeString      documentation The data type to which the alias key will be replaced (default String). keyPrefix   xs:string   optional         documentation Specify the prefix for the alias key. keySuffix   xs:string   optional         documentation Specify the suffix for the alias key.

attribute TemplateKeyDefinitionXML/@id

annotation

documentation The id to be referred to by the alias.

attribute TemplateKeyDefinitionXML/@name

annotation

documentation The name to be associated with the aliased key.

attribute TemplateKeyDefinitionXML/@targetType

annotation

documentation The data type to which the alias key will be replaced (default String).

attribute TemplateKeyDefinitionXML/@keyPrefix

annotation

documentation Specify the prefix for the alias key.

attribute TemplateKeyDefinitionXML/@keySuffix

annotation

documentation Specify the suffix for the alias key.

simpleType BlackBoxTemplateKeyTypesXML

---

element rangeValidationConfig

diagram
annotation	documentation Contains one or more constraints that constrain the values of certain exchange items.

complexType RangeValidationConfigXML

diagram

element RangeValidationConfigXML/constraint

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation id   xs:string   required         documentation Id of this constraint. This is only used to refer to this constraint in log messages.
annotation	documentation One or more constraints that constrain the values of certain exchange items. If a constraint is applied on a given sourceExchangeItem, then a new targetExchangeIitem is created with the specified constraint and an id that is the sourceExchangeItemId with the configured suffix appended. To use the targetExchangeItem in other parts of the configuration refer to it using its own id. It is also possible to apply multiple constraints on a given exchangeItem recursively. This can be done by configuring a constraint that works on a targetExchangeItem from another constraint. If multiple constraints are applied to a given exchangeItem recursively, then the outermost constraint is applied first.

complexType RangeValidationConstantLimitsConstraintXML

diagram

element RangeValidationConstantLimitsConstraintXML/targetExchangeItemIdSuffix

diagram
annotation	documentation Each sourceExchangeItem is wrapped in a new targetExchangeItem. The targetExchangeItemId is the sourceExchangeItemId with the configured suffix appended. Use that id to refer to this targetExchangeItem in other parts of the configuration.

element RangeValidationConstantLimitsConstraintXML/sourceExchangeItemId

diagram
annotation	documentation One or more ids of exchange items to which this constraint should be applied. This can e.g. be a modelExchangeItem or a targetExchangeItem from another constraint.

element RangeValidationConstantLimitsConstraintXML/lowerLimit

diagram
annotation	documentation Optional. If the value of a model exchange item is below the lower limit, then the value is changed to the lower limit.

element RangeValidationConstantLimitsConstraintXML/upperLimit

diagram
annotation	documentation Optional. If the value of a model exchange item is above the upper limit, then the value is changed to the upper limit.

complexType RangeValidationConstraintXML

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation id   xs:string   required         documentation Id of this constraint. This is only used to refer to this constraint in log messages.

attribute RangeValidationConstraintXML/@id

annotation

documentation Id of this constraint. This is only used to refer to this constraint in log messages.

element RangeValidationConstraintXML/constantLimits

diagram

annotation

documentation Constraint that limits the range of the specified exchange item using the specified lower and/or upper limit. If the value of the exchange item is below the lower limit, then the value is changed to the lower limit. If the value of a model exchange item is above the upper limit, then the value is changed to the upper limit. If an exchange item has more than one value (e.g. a 2D grid), then the specified limits are applied to all values in the exchange item.

element resultSelection

diagram

complexType ResultItemXML

diagram

attributes

Name   Type   Use   Default   Fixed   Annotation id   xs:string   optional         documentation Identity (name) of the result item minSize   xs:integer   optional         documentation Minimum size (number of elements) of the result item. maxSize   xs:integer   optional         documentation Maximum size (number of elements) of the result item. outputLevel   openda:ResultWriterOutputLevelXML   optional         documentation Grouping of the result items according to their level of significance: None, Essential,Normal,Verbose,All. context   xs:string   optional         documentation Context in which the result item should be written in the output, for example model instance id, iteration id, etc. doLog   xs:boolean   optional         documentation Switch output of result item on or off source   openda:ResultWriterSourceTypeXML   optional         documentation Source of the result item ("observer", "model", "algorithm" or "other")

attribute ResultItemXML/@id

annotation

documentation Identity (name) of the result item

attribute ResultItemXML/@minSize

annotation

documentation Minimum size (number of elements) of the result item.

attribute ResultItemXML/@maxSize

annotation

documentation Maximum size (number of elements) of the result item.

attribute ResultItemXML/@outputLevel

annotation

documentation Grouping of the result items according to their level of significance: None, Essential,Normal,Verbose,All.

attribute ResultItemXML/@context

annotation

documentation Context in which the result item should be written in the output, for example model instance id, iteration id, etc.

attribute ResultItemXML/@doLog

annotation

documentation Switch output of result item on or off

attribute ResultItemXML/@source

annotation

documentation Source of the result item ("observer", "model", "algorithm" or "other")

element ResultItemXML/messageType

diagram
annotation	documentation Type of message ("step", "inner", "outer", or "evaluation"). Deprecated function, will not be supported in future versions of OpenDA.

complexType ResultLoggingXML

diagram

attributes

Name   Type   Use   Default   Fixed   Annotation observer   xs:boolean   optional   true      documentation Output source is observer model   xs:boolean   optional   true      documentation Output source is model algorithm   xs:boolean   optional   true      documentation Output source is algorithm nonConfiguredItems   xs:boolean   optional   true      documentation Output source is other non-declared component

attribute ResultLoggingXML/@observer

annotation

documentation Output source is observer

attribute ResultLoggingXML/@model

annotation

documentation Output source is model

attribute ResultLoggingXML/@algorithm

annotation

documentation Output source is algorithm

attribute ResultLoggingXML/@nonConfiguredItems

annotation

documentation Output source is other non-declared component

complexType ResultSelectionXML

diagram

element ResultSelectionXML/doLog

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation observer   xs:boolean   optional   true      documentation Output source is observer model   xs:boolean   optional   true      documentation Output source is model algorithm   xs:boolean   optional   true      documentation Output source is algorithm nonConfiguredItems   xs:boolean   optional   true      documentation Output source is other non-declared component
annotation	documentation Switch sources on or off for output

element ResultSelectionXML/resultItem

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation id   xs:string   optional         documentation Identity (name) of the result item minSize   xs:integer   optional         documentation Minimum size (number of elements) of the result item. maxSize   xs:integer   optional         documentation Maximum size (number of elements) of the result item. outputLevel   openda:ResultWriterOutputLevelXML   optional         documentation Grouping of the result items according to their level of significance: None, Essential,Normal,Verbose,All. context   xs:string   optional         documentation Context in which the result item should be written in the output, for example model instance id, iteration id, etc. doLog   xs:boolean   optional         documentation Switch output of result item on or off source   openda:ResultWriterSourceTypeXML   optional         documentation Source of the result item ("observer", "model", "algorithm" or "other")
annotation	documentation Select the items to be switched on/off for output

simpleType ResultWriterMessageTypeXML

---

simpleType ResultWriterOutputLevelXML

---

simpleType ResultWriterSourceTypeXML

---

element treeVectorFile

diagram
annotation	documentation Costa / DATools Tree Vector File

complexType ComputationalDimensionXML

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation id   xs:string   required         length   xs:int   required

attribute ComputationalDimensionXML/@id

---

attribute ComputationalDimensionXML/@length

---

complexType ComputationalSpaceXML

diagram

element ComputationalSpaceXML/dimension

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation id   xs:string   required         length   xs:int   required

complexType DateTimeXML

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation date   openda:DateXML   required         documentation ISO 8601 (yyyy-mm-dd) time   openda:TimeXML   required         documentation ISO 8601 (hh:mm:ss[.msec]) timeZone   openda:TimeZoneXML   optional

attribute DateTimeXML/@date

annotation

documentation ISO 8601 (yyyy-mm-dd)

attribute DateTimeXML/@time

annotation

documentation ISO 8601 (hh:mm:ss[.msec])

attribute DateTimeXML/@timeZone

---

complexType DimensionsXML

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation dimSize1   xs:string   required         dimSize2   xs:string   optional         dimSize3   xs:string   optional

attribute DimensionsXML/@dimSize1

---

attribute DimensionsXML/@dimSize2

---

attribute DimensionsXML/@dimSize3

---

complexType GridXML

diagram

element GridXML/computationalSpace

diagram

element GridXML/physicalSpace

diagram

complexType MetaInfoXML

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation id   xs:string

attribute MetaInfoXML/@id

---

complexType PhysicalDimensionXML

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation id   xs:string   required         axes   xs:string   required         ref   xs:string   required

attribute PhysicalDimensionXML/@id

---

attribute PhysicalDimensionXML/@axes

---

attribute PhysicalDimensionXML/@ref

---

complexType PhysicalSpaceXML

diagram

element PhysicalSpaceXML/dimension

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation id   xs:string   required         axes   xs:string   required         ref   xs:string   required

complexType TreeVectorFileXML

diagram

element TreeVectorFileXML/timeStamp

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation date   openda:DateXML   required         documentation ISO 8601 (yyyy-mm-dd) time   openda:TimeXML   required         documentation ISO 8601 (hh:mm:ss[.msec]) timeZone   openda:TimeZoneXML   optional

element TreeVectorFileXML/treeVector

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation id   xs:string            caption   xs:string            excludeFromVector   xs:boolean   optional         className   xs:string

complexType TreeVectorLeafXML

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation id   xs:string            caption   xs:string            excludeFromVector   xs:boolean   optional         className   xs:string

attribute TreeVectorLeafXML/@id

---

attribute TreeVectorLeafXML/@caption

---

attribute TreeVectorLeafXML/@excludeFromVector

---

attribute TreeVectorLeafXML/@className

---

element TreeVectorLeafXML/unit

diagram

element TreeVectorLeafXML/missingValue

diagram

element TreeVectorLeafXML/dimensions

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation dimSize1   xs:string   required         dimSize2   xs:string   optional         dimSize3   xs:string   optional

element TreeVectorLeafXML/grid

diagram

element TreeVectorLeafXML/vector

diagram

complexType TreeVectorXML

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation id   xs:string            caption   xs:string            excludeFromVector   xs:boolean   optional         className   xs:string

attribute TreeVectorXML/@id

---

attribute TreeVectorXML/@caption

---

attribute TreeVectorXML/@excludeFromVector

---

attribute TreeVectorXML/@className

---

element TreeVectorXML/description

diagram

element TreeVectorXML/treeVectorLeaf

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation id   xs:string            caption   xs:string            excludeFromVector   xs:boolean   optional         className   xs:string

element TreeVectorXML/subTreeVector

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation id   xs:string            caption   xs:string            excludeFromVector   xs:boolean   optional         className   xs:string

simpleType DateXML

---

simpleType TimeXML

---

simpleType TimeZoneXML

---

simpleType VectorXML

---

element blackBoxModelConfig

diagram
annotation	documentation Configuration for a black box model. Here the reference to a specific model configuration is made.

complexType AliasValuesXML

diagram

element AliasValuesXML/alias

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation key   xs:string   required         documentation The alias key name as defined in the black box wrapper configuration value   xs:string            documentation The actual value referred to by the alias key
annotation	documentation Specify the alias keys and (optionally) the corresponding actual values

complexType AliasValueXML

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation key   xs:string   required         documentation The alias key name as defined in the black box wrapper configuration value   xs:string            documentation The actual value referred to by the alias key

attribute AliasValueXML/@key

annotation

documentation The alias key name as defined in the black box wrapper configuration

attribute AliasValueXML/@value

annotation

documentation The actual value referred to by the alias key

element AliasValueXML/listValue

diagram
annotation	documentation This type of alias can only be used for BBAction arguments, where the argument must be specified by means of only naming the 'list value' alias. If the listValue element is present, it overrules the value attribute, indicating that the actual value is in fact a list of string arguments instead of one argument.

complexType BlackBoxConfigurableXML

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation className   xs:string   required         documentation Specify the openda:class name for performing this operation

attribute BlackBoxConfigurableXML/@className

annotation

documentation Specify the openda:class name for performing this operation

element BlackBoxConfigurableXML/configFile

diagram
annotation	documentation Specify the configuration filename

element BlackBoxConfigurableXML/configString

diagram
annotation	documentation Specify the configuration string

element BlackBoxConfigurableXML/arg

diagram
annotation	documentation Specify the input argument of this openda:class

complexType BlackBoxIoSubVectorXML

diagram

attributes

Name   Type   Use   Default   Fixed   Annotation id   xs:string   required         documentation Identity of the exchange item vector to be used in the stochastic model configuration ioObjectId   xs:string   required         documentation The corresponding object identity of the exchange item elementId   xs:string   required         documentation The corresponding identity of the exchange item as used internally within the model role   openda:BlackBoxModelRoleTypesXML   optional   InOut      documentation The corresponding role type of the exchange item, choose "Input", "Output" or "InOut"

attribute BlackBoxIoSubVectorXML/@id

annotation

documentation Identity of the exchange item vector to be used in the stochastic model configuration

attribute BlackBoxIoSubVectorXML/@ioObjectId

annotation

documentation The corresponding object identity of the exchange item

attribute BlackBoxIoSubVectorXML/@elementId

annotation

documentation The corresponding identity of the exchange item as used internally within the model

attribute BlackBoxIoSubVectorXML/@role

annotation

documentation The corresponding role type of the exchange item, choose "Input", "Output" or "InOut"

element BlackBoxIoSubVectorXML/selection

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation index1   openda:indexStringType   required         documentation Indices of the selected array elements of the first dimension. Format:  "ind1" (single index)," ind1:" (from ind1 up to the last index), ":ind1" (from the first index up to ind1), "ind1:ind2" (from ind1 up to ind2). Example: 8, :4, 19:, 7:12. index2   openda:indexStringType   optional         documentation Indices of the selected array elements of the second dimension. Format:  "ind1" (single index)," ind1:" (from ind1 up to the last index), ":ind1" (from the first index up to ind1), "ind1:ind2" (from ind1 up to ind2). Example: 8, :4, 19:, 7:12. index3   openda:indexStringType   optional         documentation Indices of the selected array elements of the third dimension. Format:  "ind1" (single index)," ind1:" (from ind1 up to the last index), ":ind1" (from the first index up to ind1), "ind1:ind2" (from ind1 up to ind2). Example: 8, :4, 19:, 7:12. base   xs:int   optional   0      documentation Base number, which gives the index of the vector's first element (sometimes 1 instead of 0)
annotation	documentation Select subvector using indices of the vector elements

element BlackBoxIoSubVectorXML/selector

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation className   xs:string   required         documentation Specify the openda:class name for performing this operation
annotation	documentation Define operator for deriving the subvector

complexType BlackBoxIoVectorXML

diagram

attributes

Name   Type   Use   Default   Fixed   Annotation id   xs:string   required         documentation Identity of the exchange item vector to be used in the stochastic model configuration. Note: by using the reserved id "allElementsFromIoObject" all the elements in the data/io object are exposed as exchange items (with the element id in the data/io object as id) ioObjectId   xs:string   required         documentation The corresponding object identity of the exchange item elementId   xs:string   optional         documentation The corresponding identity of the exchange item as used internally within the model. If this is not specified, then the elementId will be equal to the specified id. role   openda:BlackBoxModelRoleTypesXML   optional   InOut      documentation The corresponding role type of the exchange item, choose "Input", "Output" or "InOut" idSuffix   xs:string            documentation Optional. This suffix will be appended to the specified id. If elementId not specified, then the elementId will still be equal to the specified id without this suffix. If id="allElementsFromIoObject", then this suffix will be appended to the ids of all exchangeItems of elements in the ioObject. In that case the elementIds will still be equal to the original ids of the elements in the ioObject, i.e. without this suffix.

attribute BlackBoxIoVectorXML/@id

annotation

documentation Identity of the exchange item vector to be used in the stochastic model configuration. Note: by using the reserved id "allElementsFromIoObject" all the elements in the data/io object are exposed as exchange items (with the element id in the data/io object as id)

attribute BlackBoxIoVectorXML/@ioObjectId

annotation

documentation The corresponding object identity of the exchange item

attribute BlackBoxIoVectorXML/@elementId

annotation

documentation The corresponding identity of the exchange item as used internally within the model. If this is not specified, then the elementId will be equal to the specified id.

attribute BlackBoxIoVectorXML/@role

annotation

documentation The corresponding role type of the exchange item, choose "Input", "Output" or "InOut"

attribute BlackBoxIoVectorXML/@idSuffix

annotation

documentation Optional. This suffix will be appended to the specified id. If elementId not specified, then the elementId will still be equal to the specified id without this suffix. If id="allElementsFromIoObject", then this suffix will be appended to the ids of all exchangeItems of elements in the ioObject. In that case the elementIds will still be equal to the original ids of the elements in the ioObject, i.e. without this suffix.

complexType BlackBoxModelConfigXML

diagram

element BlackBoxModelConfigXML/wrapperConfig

diagram
annotation	documentation Specify black box wrapper configuration that addresses the deterministic model

element BlackBoxModelConfigXML/aliasValues

diagram
annotation	documentation Specify the actual values referred to by the alias keys defined in the black box wrapper configuration

element BlackBoxModelConfigXML/timeInfo

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation start   xs:dateTime   optional         documentation Specify the start time of the simulation (yyyy-mm-ddThh:mm:ss) end   xs:dateTime   optional         documentation Specify the end time of the simulation (yyyy-mm-ddThh:mm:ss) timeStepInSeconds   xs:double   optional         documentation Specify the time step of the simulation in seconds
annotation	documentation Specify the time information of the simulation (optional)

element BlackBoxModelConfigXML/timeInfoExchangeItems

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation start   xs:string   optional         documentation The identifier of the exchange item that contains the start time of the simulation end   xs:string   optional         documentation The identifier of the exchange item that contains the end time of the simulation timeStep   xs:string   optional         documentation The identifier of the exchange item that contains the model time step of the simulation
annotation	documentation Specify the time information of the simulation in terms of ioObject exchange item id's (optional). Multiple timeInfoExchangeItems can be specified, each one with a unique id. This is needed if there are multiple ioObjects that have exchangeItems for the start and/or end time.

element BlackBoxModelConfigXML/exchangeItems

diagram
annotation	documentation Specify the list of items to exchange between the model and OpenDA components. An exchange item may be defined either as vector or subvector.

element BlackBoxModelConfigXML/doCleanUp

diagram
annotation	documentation Specify whether to remove unnecessary files upon completion of a model run (boolean, optional)

element BlackBoxModelConfigXML/skipModelActionsIfInstanceDirExists

diagram
annotation	documentation If set to true, no actions are executed on a model instance that already exists (boolean, optional)

element BlackBoxModelConfigXML/restartInfo

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation dirPrefix   xs:string   optional   ./savedModelState_      documentation Specify the prefix of model directory name that will contain a set of restart files for a certain time stamp (written when the stoch model level requests to store states, read when the algorithm asks to restore a state)
annotation	documentation Restart dir./files information.

complexType BlackBoxModelRestartInfoXML

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation dirPrefix   xs:string   optional   ./savedModelState_      documentation Specify the prefix of model directory name that will contain a set of restart files for a certain time stamp (written when the stoch model level requests to store states, read when the algorithm asks to restore a state)

attribute BlackBoxModelRestartInfoXML/@dirPrefix

annotation

documentation Specify the prefix of model directory name that will contain a set of restart files for a certain time stamp (written when the stoch model level requests to store states, read when the algorithm asks to restore a state)

element BlackBoxModelRestartInfoXML/modelStateFile

diagram
annotation	documentation Specify the file name(s) containing the model state

complexType BlackBoxWrapperConfigReferenceXML

diagram

element BlackBoxWrapperConfigReferenceXML/file

diagram
annotation	documentation Specify the name of the black box wrapper configuration file, relative to local directory. File format: blackBoxWrapperConfig

complexType ExchangeItemXML

diagram

element ExchangeItemXML/vector

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation id   xs:string   required         documentation Identity of the exchange item vector to be used in the stochastic model configuration. Note: by using the reserved id "allElementsFromIoObject" all the elements in the data/io object are exposed as exchange items (with the element id in the data/io object as id) ioObjectId   xs:string   required         documentation The corresponding object identity of the exchange item elementId   xs:string   optional         documentation The corresponding identity of the exchange item as used internally within the model. If this is not specified, then the elementId will be equal to the specified id. role   openda:BlackBoxModelRoleTypesXML   optional   InOut      documentation The corresponding role type of the exchange item, choose "Input", "Output" or "InOut" idSuffix   xs:string            documentation Optional. This suffix will be appended to the specified id. If elementId not specified, then the elementId will still be equal to the specified id without this suffix. If id="allElementsFromIoObject", then this suffix will be appended to the ids of all exchangeItems of elements in the ioObject. In that case the elementIds will still be equal to the original ids of the elements in the ioObject, i.e. without this suffix.
annotation	documentation Specify vector of the exchange item

element ExchangeItemXML/subVector

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation id   xs:string   required         documentation Identity of the exchange item vector to be used in the stochastic model configuration ioObjectId   xs:string   required         documentation The corresponding object identity of the exchange item elementId   xs:string   required         documentation The corresponding identity of the exchange item as used internally within the model role   openda:BlackBoxModelRoleTypesXML   optional   InOut      documentation The corresponding role type of the exchange item, choose "Input", "Output" or "InOut"
annotation	documentation Specify subvector of the exchange item

complexType TimeInfoExchangeItemsXML

diagram

attributes

Name   Type   Use   Default   Fixed   Annotation start   xs:string   optional         documentation The identifier of the exchange item that contains the start time of the simulation end   xs:string   optional         documentation The identifier of the exchange item that contains the end time of the simulation timeStep   xs:string   optional         documentation The identifier of the exchange item that contains the model time step of the simulation

attribute TimeInfoExchangeItemsXML/@start

annotation

documentation The identifier of the exchange item that contains the start time of the simulation

attribute TimeInfoExchangeItemsXML/@end

annotation

documentation The identifier of the exchange item that contains the end time of the simulation

attribute TimeInfoExchangeItemsXML/@timeStep

annotation

documentation The identifier of the exchange item that contains the model time step of the simulation

complexType TimeInfoXML

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation start   xs:dateTime   optional         documentation Specify the start time of the simulation (yyyy-mm-ddThh:mm:ss) end   xs:dateTime   optional         documentation Specify the end time of the simulation (yyyy-mm-ddThh:mm:ss) timeStepInSeconds   xs:double   optional         documentation Specify the time step of the simulation in seconds

attribute TimeInfoXML/@start

annotation

documentation Specify the start time of the simulation (yyyy-mm-ddThh:mm:ss)

attribute TimeInfoXML/@end

annotation

documentation Specify the end time of the simulation (yyyy-mm-ddThh:mm:ss)

attribute TimeInfoXML/@timeStepInSeconds

annotation

documentation Specify the time step of the simulation in seconds

simpleType BlackBoxModelRoleTypesXML

---

element blackBoxWrapperConfig

diagram
annotation	documentation Configuration of a black box model wrapper. It contains of three main components: alias definitions, model run, and input-output definition.

complexType ActionsXML

diagram

element ActionsXML/action

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation exe   xs:string   optional         documentation Name and path of the executable file windowsExe   xs:string   optional         documentation Name and path of the executable file for Windows operating system linuxExe   xs:string   optional         documentation Name and path of the executable file for Linux operating system macExe   xs:string   optional         documentation Name and path of the executable file for Mac operating system className   xs:string   optional         documentation The openda:class name. workingDirectory   xs:string   optional         documentation Directory where executable file is run. This is usually the instance dir. This is only used in blackBoxStochModelConfig. actualWorkingDirectory   xs:string   optional         documentation Subdirectory of instance dir, where executable file has to be run. To be specified as relative path to instance dir. This is only used in blackBoxWrapperConfig. This is only used for executable files, not for Java classes. For Java classes the instanceDir is used as workingDirectory. ignoreStatus   xs:boolean   optional   false      documentation Flag for ignoring the status of the previous action step (ignoreStatus=true). Not yet implemented.
annotation	documentation Specify the consecutive actions  by model executables or classes to run, arguments to supply and fail/success checks to perform

complexType ActionXML

diagram

attributes

Name   Type   Use   Default   Fixed   Annotation exe   xs:string   optional         documentation Name and path of the executable file windowsExe   xs:string   optional         documentation Name and path of the executable file for Windows operating system linuxExe   xs:string   optional         documentation Name and path of the executable file for Linux operating system macExe   xs:string   optional         documentation Name and path of the executable file for Mac operating system className   xs:string   optional         documentation The openda:class name. workingDirectory   xs:string   optional         documentation Directory where executable file is run. This is usually the instance dir. This is only used in blackBoxStochModelConfig. actualWorkingDirectory   xs:string   optional         documentation Subdirectory of instance dir, where executable file has to be run. To be specified as relative path to instance dir. This is only used in blackBoxWrapperConfig. This is only used for executable files, not for Java classes. For Java classes the instanceDir is used as workingDirectory. ignoreStatus   xs:boolean   optional   false      documentation Flag for ignoring the status of the previous action step (ignoreStatus=true). Not yet implemented.

attribute ActionXML/@exe

annotation

documentation Name and path of the executable file

attribute ActionXML/@windowsExe

annotation

documentation Name and path of the executable file for Windows operating system

attribute ActionXML/@linuxExe

annotation

documentation Name and path of the executable file for Linux operating system

attribute ActionXML/@macExe

annotation

documentation Name and path of the executable file for Mac operating system

attribute ActionXML/@className

annotation

documentation The openda:class name.

attribute ActionXML/@workingDirectory

annotation

documentation Directory where executable file is run. This is usually the instance dir. This is only used in blackBoxStochModelConfig.

attribute ActionXML/@actualWorkingDirectory

annotation

documentation Subdirectory of instance dir, where executable file has to be run. To be specified as relative path to instance dir. This is only used in blackBoxWrapperConfig. This is only used for executable files, not for Java classes. For Java classes the instanceDir is used as workingDirectory.

attribute ActionXML/@ignoreStatus

annotation

documentation Flag for ignoring the status of the previous action step (ignoreStatus=true). Not yet implemented.

element ActionXML/arg

diagram
annotation	documentation Specify list of  input arguments of the model executable

element ActionXML/checkOutput

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation file   xs:string   required         documentation Name of output file expect   xs:string   optional         documentation Expected content of the output file when the action is successful
annotation	documentation Specify list of output files to be checked after the command execution has finished

element ActionXML/checkReturnStatus

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation expect   xs:string   required         documentation Expected return value when the action is successful
annotation	documentation Specify return value after the command execution has finished

complexType AliasDefinitionsXML

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation defaultKeyPrefix   xs:string   optional         documentation Specify the default prefix for the alias keys defaultKeySuffix   xs:string   optional         documentation Specify the default suffix for the alias keys

attribute AliasDefinitionsXML/@defaultKeyPrefix

annotation

documentation Specify the default prefix for the alias keys

attribute AliasDefinitionsXML/@defaultKeySuffix

annotation

documentation Specify the default suffix for the alias keys

element AliasDefinitionsXML/alias

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation key   xs:string   required         documentation The alias key name value   xs:string   optional         documentation Actual value referred to by the alias key keyPrefix   xs:string   optional         documentation Specify the prefix for the alias key keySuffix   xs:string   optional         documentation Specify the suffix for the alias key
annotation	documentation Create list of aliases containing keys and (optional) the corresponding values

complexType AliasDefinitionXML

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation key   xs:string   required         documentation The alias key name value   xs:string   optional         documentation Actual value referred to by the alias key keyPrefix   xs:string   optional         documentation Specify the prefix for the alias key keySuffix   xs:string   optional         documentation Specify the suffix for the alias key

attribute AliasDefinitionXML/@key

annotation

documentation The alias key name

attribute AliasDefinitionXML/@value

annotation

documentation Actual value referred to by the alias key

attribute AliasDefinitionXML/@keyPrefix

annotation

documentation Specify the prefix for the alias key

attribute AliasDefinitionXML/@keySuffix

annotation

documentation Specify the suffix for the alias key

element AliasDefinitionXML/listValue

diagram
annotation	documentation This type of alias can only be used for BBAction arguments, where the argument must be specified by means of only naming the 'list value' alias. If the listValue element is present, it overrules the value attribute, indicating that the actual value is in fact a list of string arguments instead of one argument.

complexType BlackBoxWrapperConfigXML

diagram

element BlackBoxWrapperConfigXML/aliasDefinitions

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation defaultKeyPrefix   xs:string   optional         documentation Specify the default prefix for the alias keys defaultKeySuffix   xs:string   optional         documentation Specify the default suffix for the alias keys
annotation	documentation Define aliases for specific model information (directory names, file names etc.). Specify the prefix and suffix for the alias keys.

element BlackBoxWrapperConfigXML/run

diagram
annotation	documentation Specify the initialize, compute and finalize actions that direct the model

element BlackBoxWrapperConfigXML/inputOutput

diagram
annotation	documentation Specify the list of input/output objects

complexType BlackBoxWrapperRunXML

diagram

element BlackBoxWrapperRunXML/initializeActions

diagram
annotation	documentation Generic method of initialization actions

element BlackBoxWrapperRunXML/initializeActionsUsingDirClone

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation templateDir   xs:string            documentation Directory where the template files are stored instanceDir   xs:string            documentation The working directory where the template directory will be copied into
annotation	documentation The directory, in which the model executables and input files are located, will be copied to a new working directory. The actions are executed in this new working directory.

element BlackBoxWrapperRunXML/initializeActionsUsingFileClone

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation templateFile   xs:string            documentation Name of the template file. instanceFile   xs:string            documentation File name of the instance of the template file.
annotation	documentation Some of the model files (template) will be copied to the working directory where the actions will be executed

element BlackBoxWrapperRunXML/computeActions

diagram
annotation	documentation Configure the method for model computation

element BlackBoxWrapperRunXML/additionalComputeActions

diagram
annotation	documentation Configure the actions that should be performed after all other computation actions (used for instance when the actual computation is sent to a queue. The additional computation action can then be used to start a script that checks the status of the queue.

element BlackBoxWrapperRunXML/finalizeActions

diagram
annotation	documentation Configure the method for model finalization

complexType CheckOutputXML

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation file   xs:string   required         documentation Name of output file expect   xs:string   optional         documentation Expected content of the output file when the action is successful

attribute CheckOutputXML/@file

annotation

documentation Name of output file

attribute CheckOutputXML/@expect

annotation

documentation Expected content of the output file when the action is successful

complexType CheckReturnStatusXML

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation expect   xs:string   required         documentation Expected return value when the action is successful

attribute CheckReturnStatusXML/@expect

annotation

documentation Expected return value when the action is successful

complexType CloneDirXML

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation templateDir   xs:string   required

attribute CloneDirXML/@templateDir

---

complexType CloneFileXML

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation templateFile   xs:string   required

attribute CloneFileXML/@templateFile

---

complexType InitialActionsDirCloneXML

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation templateDir   xs:string            documentation Directory where the template files are stored instanceDir   xs:string            documentation The working directory where the template directory will be copied into

attribute InitialActionsDirCloneXML/@templateDir

annotation

documentation Directory where the template files are stored

attribute InitialActionsDirCloneXML/@instanceDir

annotation

documentation The working directory where the template directory will be copied into

element InitialActionsDirCloneXML/action

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation exe   xs:string   optional         documentation Name and path of the executable file windowsExe   xs:string   optional         documentation Name and path of the executable file for Windows operating system linuxExe   xs:string   optional         documentation Name and path of the executable file for Linux operating system macExe   xs:string   optional         documentation Name and path of the executable file for Mac operating system className   xs:string   optional         documentation The openda:class name. workingDirectory   xs:string   optional         documentation Directory where executable file is run. This is usually the instance dir. This is only used in blackBoxStochModelConfig. actualWorkingDirectory   xs:string   optional         documentation Subdirectory of instance dir, where executable file has to be run. To be specified as relative path to instance dir. This is only used in blackBoxWrapperConfig. This is only used for executable files, not for Java classes. For Java classes the instanceDir is used as workingDirectory. ignoreStatus   xs:boolean   optional   false      documentation Flag for ignoring the status of the previous action step (ignoreStatus=true). Not yet implemented.
annotation	documentation Specify the consecutive actions  by model executables or classes to run, arguments to supply and fail/success checks to perform

complexType InitialActionsFileCloneXML

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation templateFile   xs:string            documentation Name of the template file. instanceFile   xs:string            documentation File name of the instance of the template file.

attribute InitialActionsFileCloneXML/@templateFile

annotation

documentation Name of the template file.

attribute InitialActionsFileCloneXML/@instanceFile

annotation

documentation File name of the instance of the template file.

element InitialActionsFileCloneXML/action

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation exe   xs:string   optional         documentation Name and path of the executable file windowsExe   xs:string   optional         documentation Name and path of the executable file for Windows operating system linuxExe   xs:string   optional         documentation Name and path of the executable file for Linux operating system macExe   xs:string   optional         documentation Name and path of the executable file for Mac operating system className   xs:string   optional         documentation The openda:class name. workingDirectory   xs:string   optional         documentation Directory where executable file is run. This is usually the instance dir. This is only used in blackBoxStochModelConfig. actualWorkingDirectory   xs:string   optional         documentation Subdirectory of instance dir, where executable file has to be run. To be specified as relative path to instance dir. This is only used in blackBoxWrapperConfig. This is only used for executable files, not for Java classes. For Java classes the instanceDir is used as workingDirectory. ignoreStatus   xs:boolean   optional   false      documentation Flag for ignoring the status of the previous action step (ignoreStatus=true). Not yet implemented.
annotation	documentation Specify the consecutive actions  by model executables or classes to run, arguments to supply and fail/success checks to perform

complexType InputOutputXML

diagram

element InputOutputXML/ioObject

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation className   xs:string   required         documentation The openda:class name of the input/output object
annotation	documentation Specify the input/output object

complexType IoObjectXML

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation className   xs:string   required         documentation The openda:class name of the input/output object

attribute IoObjectXML/@className

annotation

documentation The openda:class name of the input/output object

element IoObjectXML/file

diagram
annotation	documentation Name of input/output file

element IoObjectXML/id

diagram
annotation	documentation Identity of the input/output object

element IoObjectXML/arg

diagram
annotation	documentation Input argument for the corresponding openda:class

complexType IndicesXML

diagram

attributes

Name   Type   Use   Default   Fixed   Annotation index1   openda:indexStringType   required         documentation Indices of the selected array elements of the first dimension. Format:  "ind1" (single index)," ind1:" (from ind1 up to the last index), ":ind1" (from the first index up to ind1), "ind1:ind2" (from ind1 up to ind2). Example: 8, :4, 19:, 7:12. index2   openda:indexStringType   optional         documentation Indices of the selected array elements of the second dimension. Format:  "ind1" (single index)," ind1:" (from ind1 up to the last index), ":ind1" (from the first index up to ind1), "ind1:ind2" (from ind1 up to ind2). Example: 8, :4, 19:, 7:12. index3   openda:indexStringType   optional         documentation Indices of the selected array elements of the third dimension. Format:  "ind1" (single index)," ind1:" (from ind1 up to the last index), ":ind1" (from the first index up to ind1), "ind1:ind2" (from ind1 up to ind2). Example: 8, :4, 19:, 7:12. base   xs:int   optional   0      documentation Base number, which gives the index of the vector's first element (sometimes 1 instead of 0)

attribute IndicesXML/@index1

annotation

documentation Indices of the selected array elements of the first dimension. Format:  "ind1" (single index)," ind1:" (from ind1 up to the last index), ":ind1" (from the first index up to ind1), "ind1:ind2" (from ind1 up to ind2). Example: 8, :4, 19:, 7:12.

attribute IndicesXML/@index2

annotation

documentation Indices of the selected array elements of the second dimension. Format:  "ind1" (single index)," ind1:" (from ind1 up to the last index), ":ind1" (from the first index up to ind1), "ind1:ind2" (from ind1 up to ind2). Example: 8, :4, 19:, 7:12.

attribute IndicesXML/@index3

annotation

documentation Indices of the selected array elements of the third dimension. Format:  "ind1" (single index)," ind1:" (from ind1 up to the last index), ":ind1" (from the first index up to ind1), "ind1:ind2" (from ind1 up to ind2). Example: 8, :4, 19:, 7:12.

attribute IndicesXML/@base

annotation

documentation Base number, which gives the index of the vector's first element (sometimes 1 instead of 0)

complexType SubArrayXML

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation sourceArray   xs:string   required         index1   openda:indexStringType   required         index2   openda:indexStringType   optional         index3   openda:indexStringType   optional

attribute SubArrayXML/@sourceArray

---

attribute SubArrayXML/@index1

---

attribute SubArrayXML/@index2

---

attribute SubArrayXML/@index3

---

complexType VariableXML

diagram
attributes	Name   Type   Use   Default   Fixed   Annotation id   xs:string   required

attribute VariableXML/@id

---

simpleType indexStringType

annotation

documentation index (e.g. 12) or index line (e.g. 11:18) in an array

XML Schema documentation generated by XMLSpy Schema Editor http://www.altova.com/xmlspy