TO DO ===== 1) built-in checks: "if parallel and z-layers then stop with an error message" etc. wrong output ============ his-file: his-const XYTRA Are set for each partition using local m/n indices Will be wrong when a crosssection lies in more than one partition Solution: write a routine gather_filter_merge collection the correct xy-locations per crosssection map-file: TEMPOUT Is not being written. map-const IROCOL Is adapted for each partition. Solution will be complex. NOROCO Zie IROCOL NOROW Zie IROCOL map-series MNKSRC k-coordinate may be -1 when the location was outside the partition used for writing Not supported functionality and limitations =========================================== - Any usage of a com-file - Z layer model - Domain Decomposition - Wave online - Fluid mud online - RTC online - Coup online - drogues and moving observation points - culvert - powerstation only works when inlet and outfall are in the same partition (is checked) - walking discharge - Restarting with morphology - Writing WAQ input files - Moving obstacles - 2D skewed (not 1D-) Weirs - Barriers - max(mmax,nmax)/npart <= 4 (is checked) - fourier output - roller model - dredge and dump - mormerge - mass balance polygons - writing dune output Testcase overview ================= OK : runs fine in parallel mode, results are correct ERROR : does not run in parallel mode, group testcase -------------------|----------------------- 01_general 02-fff ERROR: The combination of constant dx and dy and parallel is not available 03-f34 ERROR: Discharge "(14,2)" is a walking discharge and is not supported when running parallel 04-ssd ERROR: max(mmax,nmax)/npart < 4 05-sso ERROR: max(mmax,nmax)/npart < 4 06-rot ERROR: constant dx/dy (floating structure problem is solved) 07-chezy_r ERROR: output on grid specified with constant dx/dy 08-power ERROR: output on grid specified with constant dx/dy, powerstation only works when inlet and outfall are in the same partition 09-walking ERROR: walking discharge 10-culvert ERROR: culvert 11-c03 OK 12-breukelermeer OK 13-markermeer OK 14-g52 OK 15-eva OK 16-f33tutorial ERROR: drogues 17-curvesphere ERROR: Waves activated but no COM-file present 18-decay OK 19-drogues_low ERROR: drogues 20-0steps OK 21-bccorrection OK 22-unesco_sal OK 23-unesco_temp OK 24-waq_output OK 25-mobs ERROR: parallel and drogues/walking monitor points is not available. 26-abudhabi OK 27-keva1 OK 28-keva2 OK 29-keva3 OK 02_spillways 01-2dw OK 02-b1u OK 03-b2u OK 04-b3u OK 05-b4u not checked (grid not ready) ERROR: 2D weirs 07-b6u not checked (grid not ready) ERROR: 2D weirs 08-t01 OK 09-t02 not checked (grid not ready) ERROR: 2D weirs 10-t03 not checked (grid not ready) ERROR: 2D weirs 11-local_weirs OK 03_original 01-getij OK 02-lockex OK 03-disch ERROR: drogues / walking monitor points 04-siulamd ERROR: drogues / walking monitor points 05-siulamo ERROR: drogues / walking monitor points 06-india_droogval OK 07-india_cyclone ***** DISABLED ********** DISABLED ***** 08-lakevictoria OK 09-getij_with_measur OK 10-hirlam OK 11-vietnam_cyclone OK 12-secchi_variable_0 NOT OK: diff_temp < 1.1C; diff_sep < 0.12m, dif_u < 0.1 m/s 1-4 doms: idem 2-4doms: diff_temp < 1E-3 C diff_sep <5E-5m diff_u < 2E-4; (OK!) 13-foumod_scs NOT OK: wl difference of 0.2 at skewed open boundary near Andaman Sea 14-katrina_windcd3 OK 04_coarsewind 01-001 ***** DISABLED ********** DISABLED ***** 02-003 OK 03-004 OK 04-005 ***** DISABLED ********** DISABLED ***** 05-006 ***** DISABLED ********** DISABLED ***** 06-007 OK 07-034 NOT OK: dif_sep <0.01m, dif_u < 0.1m/s 08-w01 OK 09-scs NOT OK: wl difference of 0.4m at skewed open boundary near Andaman Sea 10-mark_grid_svwp OK 11-mark_grid_arc OK 12-meteo_computation ERROR: max(mmax,nmax)/npart < 4 13-meteo_equidistant ERROR: max(mmax,nmax)/npart < 4 14-meteo_equidistant ERROR: max(mmax,nmax)/npart < 4 15-meteo_curvi_ll_gr ERROR: max(mmax,nmax)/npart < 4 16-meteo_curvi_ll_gr ERROR: max(mmax,nmax)/npart < 4 17-meteo_curvi_ul_gr ERROR: max(mmax,nmax)/npart < 4 18-meteo_curvi_ul_gr ERROR: max(mmax,nmax)/npart < 4 19-meteo_curvi_lr_gr ERROR: max(mmax,nmax)/npart < 4 20-meteo_curvi_lr_gr ERROR: max(mmax,nmax)/npart < 4 21-meteo_curvi_ur_gr ERROR: max(mmax,nmax)/npart < 4 22-meteo_curvi_ur_gr ERROR: max(mmax,nmax)/npart < 4 05_hles 1-l04 OK 2-l05 OK 06_ols 01-flume ***** DISABLED ********** DISABLED ***** 02-d01 ***** DISABLED ********** DISABLED ***** 03-hump ***** DISABLED ********** DISABLED ***** 04-l06 OK 05-l07 OK 06-hump OK 07-hump2d OK 08-trench OK 09-trench2d OK 10-bijker ERROR: Waves activated but no COM-file present 11-rijn1993 ERROR: Waves activated but no COM-file present 12-vanrijn_temp OK 07_zlayers 01-channel ERROR: Z layer 02-drying-flooding ERROR: Z layer 03-tidalflume ERROR: Z layer 04-temperature ***** DISABLED ********** DISABLED ***** 05-pits ERROR: Z layer 06-125 ERROR: Z layer 07-f34 ERROR: Z layer 08-brassem ERROR: Z layer 09-zegerplas ERROR: Z layer 10-gate1 ERROR: Z layer 11-gate2 ERROR: Z layer 12-lockex_nhy ERROR: Z layer 13-jet_nhy ERROR: Z layer 14-01.06-rot_r ERROR: Z layer 15-01.07-chezy_r ERROR: Z layer 16-01.08-power_r ERROR: Z layer 17-01.12-breukelerme ERROR: Z layer 18-01.15-eva_plus ERROR: Z layer 19-03.06-india_droog ERROR: Z layer 20-04.07-034 ERROR: Z layer 21-11.10-q10 ERROR: Z layer 22-jvk-bak_met_dremp ERROR: Z layer 23-onl ERROR: Z layer 24-forester ERROR: Z layer 25-bubblescreen ERROR: Z layer 26-powerstation ERROR: Z layer 07a_zlayers_implicit01-channel ERROR: Z layer 02-drying-flooding ERROR: Z layer 03-tidalflume ERROR: Z layer 04-temperature ***** DISABLED ********** DISABLED ***** 05-pits ERROR: Z layer 06-125 ERROR: Z layer 07-f34 ERROR: Z layer 08-brassem ERROR: Z layer 09-zegerplas ERROR: Z layer 10-gate1 ERROR: Z layer 11-gate2 ERROR: Z layer 12-lockex_nhy ERROR: Z layer 13-jet_nhy ERROR: Z layer 14-01.06-rot_r ERROR: Z layer 15-01.07-chezy_r ERROR: Z layer 16-01.08-power_r ERROR: Z layer 17-01.12-breukelerme ERROR: Z layer 18-01.15-eva_plus ERROR: Z layer 19-03.06-india_droog ERROR: Z layer 20-04.07-034 ERROR: Z layer 21-11.10-q10 ERROR: Z layer 22-jvk-bak_met_dremp ERROR: Z layer 23-onl ERROR: Z layer 24-forester ERROR: Z layer 25-bubblescreen ERROR: Z layer 08_fluidmud 1-helling ERROR: Z layer 2-aandrijving1 ERROR: Z layer 3-aandrijving2 ERROR: Z layer 4-slibhelling ERROR: Z layer 5-consolidatie ERROR: Z layer 6-inuitstroom ERROR: Z layer 7-erosie ERROR: Z layer 8-klots ERROR: Z layer 9-bezinken ERROR: Z layer 09_rtc 01-basic ERROR: RTC online 02-s01a_dd ***** DISABLED ********** DISABLED ***** 10_dd 00-2bakjes ERROR: DD 01-3bakjes ERROR: DD 02-6bakjes ERROR: DD 03-vlissingen ERROR: DD 04-humber ERROR: DD 05-victoria ERROR: DD 06-x-even ERROR: DD 07-y-even ERROR: DD 08-vict-even ERROR: DD 09-3bakjes_movedback ERROR: DD 10-vlissingen_movedb ERROR: DD 11-tutorial ERROR: DD 12-whirlpool ERROR: DD 13-ols-trench-x ERROR: DD 14-ols-trench-y-refi ERROR: DD 15-ols-humber ERROR: DD 16-lockex_nhy ERROR: DD 17-jet_nhy ERROR: DD 18-cdw_nhy ERROR: DD 19-203 ERROR: DD 20-233 ERROR: DD 21-4channels_2d ERROR: DD 22-4channels_3d ERROR: DD 23-palmisland ERROR: DD 24-binnenhoek ERROR: DD 25-palmisland_4dom ERROR: DD 26-1dom_dd ERROR: DD 27-ols_forester ERROR: DD 28-settle_veloc_opb_ ERROR: DD 29-z_ini ERROR: DD 11_qhqtot 01-q01 ERROR: To be investigated 02-q02 ERROR: To be investigated 03-q03 ERROR: To be investigated 04-q04 ERROR: To be investigated 05-q05 ERROR: To be investigated 06-q06 ERROR: To be investigated 07-q07 ERROR: To be investigated 08-q08 ERROR: To be investigated 09-q09 ERROR: To be investigated 10-q10 ERROR: To be investigated 12_restart 01-c31 OK 02-c32 OK 03-c33 OK 04-c34 OK 05-c35 OK 06-bedlvlmap ERROR: Restarting with morphology 13_onlinecoup 1-o2d ERROR: Coup online 14_roller 01-t16 ERROR: Roller model 02-t18 ERROR: Roller model 03-breaker ERROR: Roller model 04-roller_dd ERROR: Roller model 15_cutcells 1-z45 ERROR: Z-model 2-zfree ERROR: Z-model 16_culvert 01-culvert_type_d ERROR: Culvert 02-culvert_type_e ERROR: Culvert 03-culvert_opb ERROR: Culvert 17_dred_dump 01-insidedump ERROR: Dredge and dump 02-outsidedump ERROR: Dredge and dump 03-2dred1dump ERROR: Dredge and dump 04-dump_is_dred ERROR: Dredge and dump 05-dad_dd ERROR: Dredge and dump 06-sandmining ERROR: Dredge and dump 07-layered_bed ERROR: Dredge and dump 18_fls-advection 01-dambreak_dry OK 02-dambreak_wet OK 03-damput ERROR: To be investigated 04-nauw OK 05-rechtdam OK 19_cdw 01-simple_sigma ERROR: Current deflecting structure is not supported when running parallel 02-simple_z ERROR: Z-model and parallel not available 03-schelde ERROR: Current deflecting structure is not supported when running parallel 20_trachytopes 01-tt3 OK 02-tt4 OK 03-tt5 ***** DISABLED ********** DISABLED ***** 04-tt6 ***** DISABLED ********** DISABLED ***** 05-tt7 ***** DISABLED ********** DISABLED ***** 06-tt8 ***** DISABLED ********** DISABLED ***** 07-tt9 ***** DISABLED ********** DISABLED ***** 08-t10 ***** DISABLED ********** DISABLED ***** 09-t11 ***** DISABLED ********** DISABLED ***** 10-t12 ***** DISABLED ********** DISABLED ***** 11-trachytest ERROR: To be investigated 12-dpmv ERROR: dif_s1 > 1E-4 13-dpmv_dep ERROR: dif_s1 > 1E-4 14-tt_veg_split ERROR: To be investigated 15-dpmv_bend ERROR: To be investigated 21_waveol 01-trench_dd ERROR: WAVE online 02-lido_dd ERROR: WAVE online 03-coafin_dd ERROR: WAVE online 04-botnow_curnow ERROR: WAVE online 05-flow_wave_roller ERROR: WAVE online 22_graded 01-graded ERROR: dif_s1 > 0.15 02-pankop ERROR: diff u > 0.03 (at inflow) 03-trench ERROR: locally very large differences 04-trench_opb ERROR: To be investigated 05-pankop_secflow_sp ERROR: To be investigated 23_timeunit 01-sec ERROR: To be investigated 24_mormerge 01-bas ERROR: mormerge 02-bas_dd_wave ERROR: mormerge 03-groin4_wave ERROR: mormerge 25_bottfric_2D_3D 01-chezygoot_equid OK 02-chezygoot_log OK 03-estuarium_equid OK 04-estuarium_log OK 05-noordzee_2d OK 06-noordzee_equid OK 07-noordzee_log OK 26_dunes 01-vRijn84 ERROR: no dune output 02-FredsoeMPM ERROR: no dune output 03-vRijn84_advection ERROR: no dune output 04-vRijn84_adv_dunei ERROR: no dune output 88_sensitive 01.01-bakje OK 01.07-chezy OK 02.06-b5u OK 99_longruns 01-vlissingen ERROR: DD 02-zlayer_tst ERROR: Z layer 03-6bakjeslong ERROR: DD 04-estuarium OK 05-schelde ERROR: fourier 06-rotterdam ERROR: To be investigated