******************************************************************************** *** *** Deltares, FLOW2D3D Version 6.02.07.7900M, Dec 6 2017, 13:54:26 *** built from : https://svn.oss.deltares.nl/repos/delft3d/branches/research/Technical%20University%20of%20Delft/20161020_ellipticity_check *** *** runid : sim_J030 *** date,time : 2017-12-06, 14:08:24 *** ******************************************************************************** *** MESSAGE Executable for 64-bits platform. *** MESSAGE Double precision computation using reals of kind 8 *** MESSAGE Using UNESCO density formulation by default *** MESSAGE Momentum solver cyclic method is specified *** MESSAGE DRYFLP and DPSOPT both specified in MD-file. Using DPSOPT: MEAN Sediment fraction 1: Sediment1 Sediment fraction 2: Sediment2 *** Start of underlayer input Underlayer mechanism : 2 Exchange layer : NO Porosity : Based on CDRYB Number of Lagrangian layers : 0 Number of Eulerian layers : 10 Thickness of Eulerian underlayers : 0.1000E-01 Base layer composition : computed separately Mixing between layers : NO Thickness transport layer : 0.1000E+00 Boundary name : Upstream Composition condition prescribed : free Boundary name : Downstream Composition condition prescribed : free Initial bed composition : mini.ini *** End of underlayer input Determining transport formulation(s) Reading: tra.tra Input file : tra.tra File in traditional MOR-format. *** Start of sediment input Ref concentration : 0.1600E+04 Option Dss : 0 Uniform mud content : 0.0000E+00 Sediment number : 1 Name : Sediment1 Type : bedload RHOSOL : 0.2650E+04 sed. distribution : loguniform SedD10 : 0.9920E-03 SedD50 : 0.9999E-03 SedDM : 0.1000E-02 SedD90 : 0.1008E-02 CDRYB : 0.1590E+04 Uniform IniThick : 0.1000E+01 [m] Formula name : General formula Transport formula used : 4 ACal : 0.7143E+01 PowerB : 0.0000E+00 PowerC : 0.2500E+01 RipFac : 0.1000E+01 ThetaC : 0.0000E+00 Sediment number : 2 Name : Sediment2 Type : bedload RHOSOL : 0.2650E+04 sed. distribution : loguniform SedD10 : 0.1992E-02 SedD50 : 0.2000E-02 SedDM : 0.2000E-02 SedD90 : 0.2008E-02 CDRYB : 0.1590E+04 Uniform IniThick : 0.1000E+01 [m] Formula name : General formula Transport formula used : 4 ACal : 0.7143E+01 PowerB : 0.0000E+00 PowerC : 0.2500E+01 RipFac : 0.1000E+01 ThetaC : 0.0000E+00 *** End of sediment input *** Start of morphological input Morphological Timescale Factor : 0.1000E+01 Morphological Changes Start Time (min) : 0.1000E+00 Fixed Layer Erosion Threshold : 0.1000E-02 Bed level updating : ACTIVE Composition updating : ACTIVE Entrainment/deposition flux in mass bal.: INCLUDED Sand Equili. conc. profs. at boundaries : USED Mud Equili. conc. profs. at boundaries : NOT USED Sediment included in fluid density calc.: NO AKSFAC : 0.1000E+01 RWAVE : 0.1000E+01 Equilibrium sed. conc. profiles :calculated (D3D mix) Suspended sed. multiplication factor : 0.1000E+01 Bed load transp. multiplication factor : 0.1000E+01 wave-rel. susp.sed.transp.fact.(SUSW) : 0.1000E+01 wave-rel. bed-ld.sed.transp.fact.(BEDW) : 0.1000E+01 Min.depth for sed. calculations(SEDTHR) : 0.1000E-02 Glob./max. dry cell erosion fact(THETSD): 0.0000E+00 Max depth for variable THETSD (HMAXTH) : 0.1500E+01 Computing THETSD for dry bank erosion Tuning param. Shields Taucr (FACTCR) : 0.1000E+01 GLM velocities i.s.o Eulerian velocities for bed load transport and reference conc: NO EPSPAR: Always use Van Rijns param. mix. dist. : NO Standard option: Rc from Flow, Rw=RWAVE*0.025 : 1 Update bed level at inflow boundaries : YES Merge bottoms from parallel runs : NO Source/sink limiter DZMAX(depth frac.) : 0.5000E-01 Max. volumetric ref. conc. CAMAX : 0.6500E+00 Hiding & exposure formulation : None Bed slope effect formulation : Koch & Flokstra ALFABS : 0.0000E+00 AShield parameter : 0.1000E+01 BShield parameter : 0.0000E+00 CShield parameter : 0.0000E+00 DShield parameter : 0.0000E+00 Requested percentile(s) : 10.0000 : 50.0000 : 90.0000 Output transport rates : volume excl. pores Hirano check : On Hirano perturbation : 0.1000E-05 Boundary name : Upstream Transport excl pores prescribed : time series Variation along boundary : uniform Boundary name : Downstream Depth prescribed : free *** End of morphological input *** MESSAGE Morphological Changes Start Time (step) : 1 *** WARNING Latitude of your model is 0 degrees, model located at equator Creating new trim-sim_J030.dat Creating new trim-sim_J030.def *** Simulation finished ******************************************************* Performance timers: |---------------------------------------------------------------------| |Timer name | wall clock | CPU time | | |-----------------------|-----------------------| | | sec | % | sec | % | |---------------------------------------------------------------------| |Initialization | 0.03 | 0.0 | 0.03 | 0.0 | |Simulation | 138.26 |100.0 | 124.82 |100.0 | |Close and stop | 0.00 | 0.0 | 0.00 | 0.0 | | |------------- +|----- +|------------- +|----- +| |Total | 138.29 |100.0 | 124.85 |100.0 | |---------------------------------------------|-----------------------| |Momentum eq. | 9.54 | 6.9 | 9.39 | 7.5 | |Continuity eq. | 10.93 | 7.9 | 10.97 | 8.8 | |Transport eq. | 0.00 | 0.0 | 0.00 | 0.0 | |Turbulence | 0.54 | 0.4 | 0.56 | 0.4 | |3D Morphology | 78.31 | 56.6 | 77.84 | 62.4 | |---------------------------------------------|-----------------------| |Wait (dd module) | 0.00 | 0.0 | 0.00 | 0.0 | |Wait (ext. modules) | 0.00 | 0.0 | 0.00 | 0.0 | |---------------------------------------------------------------------| | Performance = CPU time / (TimeSteps*MMAX*NMAX*KMAX) | | TimeSteps : 180000 | | MMAX : 12 | | NMAX : 12 | | KMAX : 1 | | Performance : 0.48167E-05 [sec] | |---------------------------------------------------------------------| |Explanation: | | | |Initialization : Everything up to the first time step | |Simulation : All time steps | |Close and stop : Everything after the last time step | |Total : FLOW for this subdomain, | | excluding allocation/deallocation of global data | | | |Momentum eq. : Part of Simulation ("UZD") | |Continuity eq. : Part of Simulation ("SUD") | |Transport eq. : Part of Simulation ("DIFU") | | Only relevant when constituents are modelled. | |Turbulence : Part of Simulation ("TURCLO, TRATUR, TUR2D") | |3D Morphology : Part of Simulation ("EROSED, BOTT3D") | | Only relevant when sediments are modelled. | |Wait (dd) : Part of Initialization, Simulation and Closing. | | ("NXTSTP, NXTDRY") | | Only relevant when DomainDecomposition is used. | | Communication with and execution of the "mappers". | | Mappers are separate threads, possibly in another | | executable, possibly on another node. They copy | | data from one subdomain to another. | | FLOWs must wait while the mappers are executing, | | mappers must wait while the FLOWs are executing. | |Wait (ext) : Part of Initialization, Simulation and Closing. | | ("SYNC, _TO_, _FROM_") | | Communication with and execution of all "external" | | modules: | | Online WAVES, Online WAQ, Online RTC, Fluid Mud. | | | |---------------------------------------------------------------------| ******************************************************************************** *** *** FINISHED Delft3D-FLOW *** runid : sim_J030 *** date, time : 2017-12-06, 14:10:42 *** ******************************************************************************** *** MESSAGE Removing file: TMP_sim_J030.grd *** MESSAGE Removing file: TMP_sim_J030.bct ******************************************************************************** *** *** Deltares, FLOW2D3D Version 6.02.07.7900M, Dec 6 2017, 13:54:26 *** built from : https://svn.oss.deltares.nl/repos/delft3d/branches/research/Technical%20University%20of%20Delft/20161020_ellipticity_check *** *** runid : sim_J030 *** date,time : 2017-12-06, 14:26:36 *** ******************************************************************************** *** MESSAGE Executable for 64-bits platform. *** MESSAGE Double precision computation using reals of kind 8 *** MESSAGE Using UNESCO density formulation by default *** MESSAGE Momentum solver cyclic method is specified *** MESSAGE DRYFLP and DPSOPT both specified in MD-file. Using DPSOPT: MEAN Sediment fraction 1: Sediment1 Sediment fraction 2: Sediment2 *** Start of underlayer input Underlayer mechanism : 2 Exchange layer : NO Porosity : Based on CDRYB Number of Lagrangian layers : 0 Number of Eulerian layers : 10 Thickness of Eulerian underlayers : 0.1000E-01 Base layer composition : computed separately Mixing between layers : NO Thickness transport layer : 0.1000E+00 Boundary name : Upstream Composition condition prescribed : free Boundary name : Downstream Composition condition prescribed : free Initial bed composition : mini.ini *** End of underlayer input Determining transport formulation(s) Reading: tra.tra Input file : tra.tra File in traditional MOR-format. *** Start of sediment input Ref concentration : 0.1600E+04 Option Dss : 0 Uniform mud content : 0.0000E+00 Sediment number : 1 Name : Sediment1 Type : bedload RHOSOL : 0.2650E+04 sed. distribution : loguniform SedD10 : 0.9920E-03 SedD50 : 0.9999E-03 SedDM : 0.1000E-02 SedD90 : 0.1008E-02 CDRYB : 0.1590E+04 Uniform IniThick : 0.1000E+01 [m] Formula name : General formula Transport formula used : 4 ACal : 0.7143E+01 PowerB : 0.0000E+00 PowerC : 0.2500E+01 RipFac : 0.1000E+01 ThetaC : 0.0000E+00 Sediment number : 2 Name : Sediment2 Type : bedload RHOSOL : 0.2650E+04 sed. distribution : loguniform SedD10 : 0.1992E-02 SedD50 : 0.2000E-02 SedDM : 0.2000E-02 SedD90 : 0.2008E-02 CDRYB : 0.1590E+04 Uniform IniThick : 0.1000E+01 [m] Formula name : General formula Transport formula used : 4 ACal : 0.7143E+01 PowerB : 0.0000E+00 PowerC : 0.2500E+01 RipFac : 0.1000E+01 ThetaC : 0.0000E+00 *** End of sediment input *** Start of morphological input Morphological Timescale Factor : 0.1000E+01 Morphological Changes Start Time (min) : 0.1000E+00 Fixed Layer Erosion Threshold : 0.1000E-02 Bed level updating : ACTIVE Composition updating : ACTIVE Entrainment/deposition flux in mass bal.: INCLUDED Sand Equili. conc. profs. at boundaries : USED Mud Equili. conc. profs. at boundaries : NOT USED Sediment included in fluid density calc.: NO AKSFAC : 0.1000E+01 RWAVE : 0.1000E+01 Equilibrium sed. conc. profiles :calculated (D3D mix) Suspended sed. multiplication factor : 0.1000E+01 Bed load transp. multiplication factor : 0.1000E+01 wave-rel. susp.sed.transp.fact.(SUSW) : 0.1000E+01 wave-rel. bed-ld.sed.transp.fact.(BEDW) : 0.1000E+01 Min.depth for sed. calculations(SEDTHR) : 0.1000E-02 Glob./max. dry cell erosion fact(THETSD): 0.0000E+00 Max depth for variable THETSD (HMAXTH) : 0.1500E+01 Computing THETSD for dry bank erosion Tuning param. Shields Taucr (FACTCR) : 0.1000E+01 GLM velocities i.s.o Eulerian velocities for bed load transport and reference conc: NO EPSPAR: Always use Van Rijns param. mix. dist. : NO Standard option: Rc from Flow, Rw=RWAVE*0.025 : 1 Update bed level at inflow boundaries : YES Merge bottoms from parallel runs : NO Source/sink limiter DZMAX(depth frac.) : 0.5000E-01 Max. volumetric ref. conc. CAMAX : 0.6500E+00 Hiding & exposure formulation : None Bed slope effect formulation : Koch & Flokstra ALFABS : 0.0000E+00 AShield parameter : 0.1000E+01 BShield parameter : 0.0000E+00 CShield parameter : 0.0000E+00 DShield parameter : 0.0000E+00 Requested percentile(s) : 10.0000 : 50.0000 : 90.0000 Output transport rates : volume excl. pores Hirano check : On Hirano perturbation : 0.1000E-05 Boundary name : Upstream Transport excl pores prescribed : time series Variation along boundary : uniform Boundary name : Downstream Depth prescribed : free *** End of morphological input *** MESSAGE Morphological Changes Start Time (step) : 1 *** WARNING Latitude of your model is 0 degrees, model located at equator *** MESSAGE Removing old output file: trim-sim_J030.dat *** MESSAGE Removing old output file: trim-sim_J030.def Creating new trim-sim_J030.dat Creating new trim-sim_J030.def *** Simulation finished ******************************************************* Performance timers: |---------------------------------------------------------------------| |Timer name | wall clock | CPU time | | |-----------------------|-----------------------| | | sec | % | sec | % | |---------------------------------------------------------------------| |Initialization | 0.04 | 0.0 | 0.03 | 0.0 | |Simulation | 144.99 |100.0 | 128.59 |100.0 | |Close and stop | 0.00 | 0.0 | 0.00 | 0.0 | | |------------- +|----- +|------------- +|----- +| |Total | 145.04 |100.0 | 128.62 |100.0 | |---------------------------------------------|-----------------------| |Momentum eq. | 9.96 | 6.9 | 9.38 | 7.3 | |Continuity eq. | 11.03 | 7.6 | 10.83 | 8.4 | |Transport eq. | 0.00 | 0.0 | 0.00 | 0.0 | |Turbulence | 0.52 | 0.4 | 0.53 | 0.4 | |3D Morphology | 80.45 | 55.5 | 81.28 | 63.2 | |---------------------------------------------|-----------------------| |Wait (dd module) | 0.00 | 0.0 | 0.00 | 0.0 | |Wait (ext. modules) | 0.00 | 0.0 | 0.00 | 0.0 | |---------------------------------------------------------------------| | Performance = CPU time / (TimeSteps*MMAX*NMAX*KMAX) | | TimeSteps : 180000 | | MMAX : 12 | | NMAX : 12 | | KMAX : 1 | | Performance : 0.49623E-05 [sec] | |---------------------------------------------------------------------| |Explanation: | | | |Initialization : Everything up to the first time step | |Simulation : All time steps | |Close and stop : Everything after the last time step | |Total : FLOW for this subdomain, | | excluding allocation/deallocation of global data | | | |Momentum eq. : Part of Simulation ("UZD") | |Continuity eq. : Part of Simulation ("SUD") | |Transport eq. : Part of Simulation ("DIFU") | | Only relevant when constituents are modelled. | |Turbulence : Part of Simulation ("TURCLO, TRATUR, TUR2D") | |3D Morphology : Part of Simulation ("EROSED, BOTT3D") | | Only relevant when sediments are modelled. | |Wait (dd) : Part of Initialization, Simulation and Closing. | | ("NXTSTP, NXTDRY") | | Only relevant when DomainDecomposition is used. | | Communication with and execution of the "mappers". | | Mappers are separate threads, possibly in another | | executable, possibly on another node. They copy | | data from one subdomain to another. | | FLOWs must wait while the mappers are executing, | | mappers must wait while the FLOWs are executing. | |Wait (ext) : Part of Initialization, Simulation and Closing. | | ("SYNC, _TO_, _FROM_") | | Communication with and execution of all "external" | | modules: | | Online WAVES, Online WAQ, Online RTC, Fluid Mud. | | | |---------------------------------------------------------------------| ******************************************************************************** *** *** FINISHED Delft3D-FLOW *** runid : sim_J030 *** date, time : 2017-12-06, 14:29:01 *** ******************************************************************************** *** MESSAGE Removing file: TMP_sim_J030.grd *** MESSAGE Removing file: TMP_sim_J030.bct