[SedimentFileInformation]
   FileCreatedBy    = Delft3D-FLOW-GUI, Version: 3.1804
   FileCreationDate = 19-12-2003,  8:50:45
   FileVersion      = 02.00
[SedimentOverall]
   Cref   = 10.e+5          [kg/m3 ] = CSoil Reference dinsity for hindered settling calculations
   IopSus = 0               [  -   ] 1: Suspended sediment size is calculated dependent on d50
[Sediment]
   Name   = #fraction 1#    [  -   ] Name as specified in NamC in md-file
   SedTyp = bedload         [  -   ] Must be "sand" or "mud" (or "bedload" for non-constituent fractions)
   RhoSol = 2650.0          [kg/m3 ] Density
   SedMinDia = 0.00006      [  m   ] Sand only: Minimum sediment diameter
   SedMaxDia = 0.0010       [  m   ] Sand only: Maximum sediment diameter
   CDryB  = 1650.0          [kg/m3 ] Dry bed density
   SdBUni = 1000.0          [kg/m2 ] Initial sediment mass at bed per unit area  (uniform value or file name)
[Sediment]
   Name   = #fraction 2#     [  -   ] Name as specified in NamC in md-file
   SedTyp = bedload         [  -   ] Must be "sand" or "mud" (or "bedload" for non-constituent fractions)
   RhoSol = 2650.0          [kg/m3 ] Density
   SedMinDia = 0.0010       [  m   ] Sand only: Minimum sediment diameter
   SedMaxDia = 0.0020       [  m   ] Sand only: Maximum sediment diameter
   CDryB  = 1650.0          [kg/m3 ] Dry bed density
   SdBUni = 700.0           [kg/m2 ] Initial sediment mass at bed per unit area  (uniform value or file name)
[Sediment]
   Name   = #fraction 3#     [  -   ] Name as specified in NamC in md-file
   SedTyp = bedload         [  -   ] Must be "sand" or "mud" (or "bedload" for non-constituent fractions)
   RhoSol = 2650.0          [kg/m3 ] Density
   SedMinDia = 0.0020       [  m   ] Sand only: Minimum sediment diameter
   SedMaxDia = 0.0028       [  m   ] Sand only: Maximum sediment diameter
   CDryB  = 1650.0          [kg/m3 ] Dry bed density
   SdBUni = 500.0           [kg/m2 ] Initial sediment mass at bed per unit area  (uniform value or file name)
[Sediment]
   Name   = #fraction 4#     [  -   ] Name as specified in NamC in md-file
   SedTyp = bedload         [  -   ] Must be "sand" or "mud" (or "bedload" for non-constituent fractions)
   RhoSol = 2650.0          [kg/m3 ] Density
   SedMinDia = 0.0028       [  m   ] Sand only: Minimum sediment diameter
   SedMaxDia = 0.0040       [  m   ] Sand only: Maximum sediment diameter
   CDryB  = 1650.0          [kg/m3 ] Dry bed density
   SdBUni = 300.0           [kg/m2 ] Initial sediment mass at bed per unit area  (uniform value or file name)
[Sediment]
   Name   = #fraction 5#     [  -   ] Name as specified in NamC in md-file
   SedTyp = bedload         [  -   ] Must be "sand" or "mud" (or "bedload" for non-constituent fractions)
   RhoSol = 2650.0          [kg/m3 ] Density
   SedMinDia = 0.0040       [  m   ] Sand only: Minimum sediment diameter
   SedMaxDia = 0.0080       [  m   ] Sand only: Maximum sediment diameter
   CDryB  = 1650.0          [kg/m3 ] Dry bed density
   SdBUni = 200.0           [kg/m2 ] Initial sediment mass at bed per unit area  (uniform value or file name)
[Sediment]
   Name   = #fraction 6#    [  -   ] Name as specified in NamC in md-file
   SedTyp = bedload         [  -   ] Must be "sand" or "mud" (or "bedload" for non-constituent fractions)
   RhoSol = 2650.0          [kg/m3 ] Density
   SedMinDia = 0.0080       [  m   ] Sand only: Minimum sediment diameter
   SedMaxDia = 0.0125       [  m   ] Sand only: Maximum sediment diameter
   CDryB  = 1650.0          [kg/m3 ] Dry bed density
   SdBUni = 800.0           [kg/m2 ] Initial sediment mass at bed per unit area  (uniform value or file name)