[MorphologyFileInformation] FileCreatedBy = Delft3D-FLOW-GUI, Version: 3.1804 FileCreationDate = 19-12-2003, 8:50:45 FileVersion = 02.00 [Morphology] MorFac = 100.0 [ - ] Morphological scale factor MorStt = 0.0 [ - ] First time step relative to ITDATE for updating Thresh = 0.05 [ m ] Threshold sediment thickness for reducing sediment exchange BedUpd = true [T/F] Update bed level during flow run CmpUpd = true [T/F] Update bed composition during flow run EqmBc = true [T/F] Equilibrium concentration at inflow boundaries DensIn = true [T/F] Include effect of sediment on density gradient AksFac = 1.0 [ - ] Van Rijn's reference height = AKSFAC * KS RWave = 2.0 [ - ] Wave related roughness = RWAVE * estimated ripple height. Van Rijn Recommends range 1-3 Rouse = true [T/F] Set equilibrium sediment concentration values to standard Rouse profiles AlfaBs = 5.0 [ - ] Longitudinal bed gradient factor for bed load transport AlfaBn = 1.0 [ - ] Transverse bed gradient factor for bed load transport Sus = 1.0 [ - ] Multiplication factor for suspended sediment reference concentration Bed = 1.0 [ - ] Multiplication factor for bed load transport vector magnitude SusW = 0.0 [ - ] Wave-related suspended sed. transport factor BedW = 0.0 [ - ] Wave-related bed-load sed. transport factor SedThr = 0.001 [ m ] Minimum threshold depth for sediment computations ThetSD = 0.0 [ - ] Fraction of erosion to assign to adjacent dry cells HMaxTH = 0.0 [ m ] Max depth for variable THETSD. Set < SEDTHR to use global value only FWFac = 0.0 [ - ] Tuning parameter for wave streaming EpsPar = false [T/F] Only for waves in combination with k-epsilon turbulence model TRUE : Van Rijn's parabolic-linear mixing distribution for current-related mixing FALSE: Vertical sediment mixing values from K-epsilon turbulence model IopKCW = 1 [ - ] Flag for determining Rc and Rw 1 (default): Rc from flow, Rw=RWAVE*0.025 2 : Rc=RDC and Rw=RDW as read from this file 3 : Rc=Rw determined from mobility RDC = 0.01 [ - ] Rc in case IopKCW = 2 RDW = 0.02 [ - ] Rw in case IopKCW = 2 Espir = 1.5 [ - ] Calibration factor spiral flow ISlope = 3 [ - ] Flag for bed slope effect 1 : None 2 (default): Bagnold 3 : Koch & Flokstra AShld = 0.8 [ - ] Bed slope parameter Koch & Flokstra BShld = 0.5 [ - ] Bed slope parameter Koch & Flokstra IHidExp= 3 [ - ] Flag for hiding & exposure 1 (default): none 2 : Egiazaroff 3 : Ashida & Michiue, modified Egiazaroff 4 : Soehngen, Kellermann, Loy 5 : Wu, Wang, Jia [Underlayer] IUnderLyr = 2 [ - ] Flag for underlayer concept 1 (default): one fully mixed layer 2 : graded sediment underlayers ExchLyr = false [T/F] Switch for exchange layer TTLForm = 1 [ - ] Transport layer thickness formulation 1 (default): constant (user-specified) thickness ThTrLyr = 0.1 [ m ] Thickness of the transport layer MxNULyr = 0 [ - ] Number of underlayers (excluding final well mixed layer) ThUnLyr = 0.1 [ m ] Thickness of each underlayer IniComp = morlyr.ini UpdBaseLyr = 2 [ - ] Flag for underlayer concept 1 (default): computed separately 2 : constant 3 : same as layer above 4 : Base layer composition and thickness constant [Numerics] HiranoCheck = 1 [ - ] Flag for well-posedness of Hirano check 0 (default): Off 1 : On [Output] Dm = true Dg = true Percentiles = 16 84 HidExp = true BedTranspAtFlux = true BedTranspDueToCurrentsAtZeta = true BedTranspDueToCurrentsAtFlux = true