subroutine SwanGradDepthorK ( dep2, mudl2, spcsig, dhdx, dhdy, dkdx, dkdy, ivert ) ! ! --|-----------------------------------------------------------|-- ! | Delft University of Technology | ! | Faculty of Civil Engineering and Geosciences | ! | Environmental Fluid Mechanics Section | ! | P.O. Box 5048, 2600 GA Delft, The Netherlands | ! | | ! | Programmer: Marcel Zijlema | ! --|-----------------------------------------------------------|-- ! ! ! SWAN (Simulating WAves Nearshore); a third generation wave model ! Copyright (C) 1993-2020 Delft University of Technology ! ! This program is free software; you can redistribute it and/or ! modify it under the terms of the GNU General Public License as ! published by the Free Software Foundation; either version 2 of ! the License, or (at your option) any later version. ! ! This program is distributed in the hope that it will be useful, ! but WITHOUT ANY WARRANTY; without even the implied warranty of ! MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ! GNU General Public License for more details. ! ! A copy of the GNU General Public License is available at ! http://www.gnu.org/copyleft/gpl.html#SEC3 ! or by writing to the Free Software Foundation, Inc., ! 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ! ! ! Authors ! ! 41.60: Marcel Zijlema ! ! Updates ! ! 41.60, July 2015: New subroutine ! ! Purpose ! ! Computes gradients of depth or wave number in vertex ! meant for computing turning rate ! ! Method ! ! Application of the Green-Gauss theorem with the assumption of ! a constant gradient over the controle volume (centroid dual) ! ! Modules used ! use ocpcomm4 use swcomm2 use swcomm3 use swcomm4 use SwanGriddata use SwanGridobjects ! implicit none ! ! Argument variables ! integer , intent(in) :: ivert ! counter corresponding to current vertex ! real, dimension(nverts), intent(in) :: dep2 ! water depth at current time level real , intent(out) :: dhdx ! derivative of depth in x-direction real , intent(out) :: dhdy ! derivative of depth in y-direction real, dimension(MSC) , intent(out) :: dkdx ! derivative of wave number in x-direction real, dimension(MSC) , intent(out) :: dkdy ! derivative of wave number in y-direction real, dimension(nverts), intent(in) :: mudl2 ! mud layer at current time level real, dimension(MSC) , intent(in) :: spcsig ! relative frequency bins ! ! Local variables ! integer :: icell ! index of present cell integer, save :: ient = 0 ! number of entries in this subroutine integer :: jc ! loop counter integer :: jcell ! index of next cell ! integer, dimension(3) :: v ! vertices in present cell ! double precision :: area ! twices the area of centroid dual around present vertex real, dimension(MSC) :: arr ! auxiliary array real :: cslat ! cosine of latitude real :: dpmax ! maximum depth found in centroid dual real :: dpmin ! minimum depth found in centroid dual real, dimension(3) :: dloc ! local depth at vertices real, dimension(3) :: dm ! local mud layer at vertices real :: dmaxc ! maximum depth found per cell of centroid dual real :: dminc ! minimum depth found per cell of centroid dual real, parameter :: drat= 5. ! ratio between maximum and minimum depths in centroid dual real :: h0 ! depth in centroid of present cell real :: h1 ! depth in centroid of next cell real, dimension(MSC) :: k0 ! wave number in centroid of present cell real, dimension(MSC) :: k1 ! wave number in centroid of next cell real, dimension(MSC,3) :: kloc ! local wave number at vertices double precision :: x0 ! x-coordinate of the centroid of present cell double precision :: x1 ! x-coordinate of the centroid of next cell double precision :: y0 ! y-coordinate of the centroid of present cell double precision :: y1 ! y-coordinate of the centroid of next cell ! character(80) :: msgstr ! string to pass message ! type(celltype), dimension(:), pointer :: cell ! datastructure for cells with their attributes type(verttype), dimension(:), pointer :: vert ! datastructure for vertices with their attributes ! ! Structure ! ! Description of the pseudo code ! ! Source text ! if (ltrace) call strace (ient,'SwanGradDepthorK') ! dhdx = 0. dhdy = 0. ! dkdx = 0. dkdy = 0. ! ! if no frequency shift and no refraction, return ! if ( (ITFRE == 0 .or. ICUR == 0) .and. IREFR == 0 ) return ! ! point to vertex and cell objects ! vert => gridobject%vert_grid cell => gridobject%cell_grid ! if ( vert(ivert)%atti(VMARKER) == 1 ) return ! boundary vertex ! if ( (IREFR /= 0 .and. int(PNUMS(32)) == 0) .or. (ITFRE /= 0 .and. ICUR /= 0) ) then ! area = 0d0 dpmax = -99999. dpmin = 99999. ! ! loop over cells around considered vertex ! do jc = 1, vert(ivert)%noc ! ! get present cell and its vertices ! icell = vert(ivert)%cell(jc)%atti(CELLID) ! v(1) = cell(icell)%atti(CELLV1) v(2) = cell(icell)%atti(CELLV2) v(3) = cell(icell)%atti(CELLV3) ! dloc(1) = dep2(v(1)) dloc(2) = dep2(v(2)) dloc(3) = dep2(v(3)) ! if ( dloc(1) <= DEPMIN .or. dloc(2) <= DEPMIN .or. dloc(3) <= DEPMIN ) goto 10 ! dminc = min ( min( dloc(1), dloc(2) ), dloc(3) ) if ( dminc < dpmin ) dpmin = dminc ! dmaxc = max ( max( dloc(1), dloc(2) ), dloc(3) ) if ( dmaxc > dpmax ) dpmax = dmaxc ! ! determine centroid of present cell ! x0 = cell(icell)%attr(CELLCX) y0 = cell(icell)%attr(CELLCY) ! ! determine depth in centroid in present cell ! h0 = ( dloc(1) + dloc(2) + dloc(3) )/ 3. ! ! get next cell in counterclockwise direction ! jcell = vert(ivert)%cell(jc)%atti(NEXTCELL) ! v(1) = cell(jcell)%atti(CELLV1) v(2) = cell(jcell)%atti(CELLV2) v(3) = cell(jcell)%atti(CELLV3) ! dloc(1) = dep2(v(1)) dloc(2) = dep2(v(2)) dloc(3) = dep2(v(3)) ! if ( dloc(1) <= DEPMIN .or. dloc(2) <= DEPMIN .or. dloc(3) <= DEPMIN ) goto 10 ! ! determine centroid of next cell ! x1 = cell(jcell)%attr(CELLCX) y1 = cell(jcell)%attr(CELLCY) ! ! determine depth in centroid of next cell ! h1 = ( dloc(1) + dloc(2) + dloc(3) )/ 3. ! ! compute contribution to area of centroid dual ! area = area + x0*y1 - x1*y0 ! ! compute contribution to x-gradient of depth ! dhdx = dhdx + ( h0 + h1 ) * real( y1 - y0 ) ! ! compute contribution to y-gradient of depth ! dhdy = dhdy + ( h0 + h1 ) * real( x1 - x0 ) ! enddo ! ! if ratio between max and min depth is too large, set gradients to zero and skip to next vertex ! !if ( dpmax > drat * dpmin ) goto 10 ! ! if area is non-positive, give error and go to next vertex ! if ( .not. area > 0d0 ) then write (msgstr, '(a,i5)') ' Area of centroid dual is negative or zero in vertex ', ivert call msgerr( 2, trim(msgstr) ) return endif ! dhdx = dhdx/real(area) dhdy = -dhdy/real(area) ! ! in case of spherical coordinates, transform back to Cartesian coordinates ! if ( KSPHER > 0 ) then ! cslat = cos(DEGRAD*(vert(ivert)%attr(VERTY) + YOFFS)) ! dhdx = dhdx/(cslat * LENDEG) dhdy = dhdy/LENDEG ! endif ! goto 20 10 dhdx = 0. dhdy = 0. ! endif ! 20 if ( IREFR /= 0 .and. int(PNUMS(32)) == 1 ) then ! area = 0d0 dpmax = -99999. dpmin = 99999. ! ! loop over cells around considered vertex ! do jc = 1, vert(ivert)%noc ! ! get present cell and its vertices ! icell = vert(ivert)%cell(jc)%atti(CELLID) ! v(1) = cell(icell)%atti(CELLV1) v(2) = cell(icell)%atti(CELLV2) v(3) = cell(icell)%atti(CELLV3) ! dloc(1) = dep2(v(1)) dloc(2) = dep2(v(2)) dloc(3) = dep2(v(3)) ! if ( dloc(1) <= DEPMIN .or. dloc(2) <= DEPMIN .or. dloc(3) <= DEPMIN ) goto 30 ! dminc = min ( min( dloc(1), dloc(2) ), dloc(3) ) if ( dminc < dpmin ) dpmin = dminc ! dmaxc = max ( max( dloc(1), dloc(2) ), dloc(3) ) if ( dmaxc > dpmax ) dpmax = dmaxc ! ! determine centroid of present cell ! x0 = cell(icell)%attr(CELLCX) y0 = cell(icell)%attr(CELLCY) ! ! compute wave numbers for all frequencies ! call KSCIP1 (MSC, spcsig, dloc(1), kloc(1,1), arr, arr, arr) call KSCIP1 (MSC, spcsig, dloc(2), kloc(1,2), arr, arr, arr) call KSCIP1 (MSC, spcsig, dloc(3), kloc(1,3), arr, arr, arr) ! if ( IMUD == 1 ) then ! if (VARMUD) then dm(1) = mudl2(v(1)) dm(2) = mudl2(v(2)) dm(3) = mudl2(v(3)) else dm(1) = PMUD(1) dm(2) = PMUD(1) dm(3) = PMUD(1) endif ! call KSCIP2 (MSC, spcsig, dloc(1), kloc(1,1), arr, arr, arr, arr, dm(1)) call KSCIP2 (MSC, spcsig, dloc(2), kloc(1,2), arr, arr, arr, arr, dm(2)) call KSCIP2 (MSC, spcsig, dloc(3), kloc(1,3), arr, arr, arr, arr, dm(3)) ! endif ! ! determine wave number in centroid in present cell ! k0(:) = ( kloc(:,1) + kloc(:,2) + kloc(:,3) )/ 3. ! ! get next cell in counterclockwise direction ! jcell = vert(ivert)%cell(jc)%atti(NEXTCELL) ! v(1) = cell(jcell)%atti(CELLV1) v(2) = cell(jcell)%atti(CELLV2) v(3) = cell(jcell)%atti(CELLV3) ! dloc(1) = dep2(v(1)) dloc(2) = dep2(v(2)) dloc(3) = dep2(v(3)) ! if ( dloc(1) <= DEPMIN .or. dloc(2) <= DEPMIN .or. dloc(3) <= DEPMIN ) goto 30 ! ! determine centroid of next cell ! x1 = cell(jcell)%attr(CELLCX) y1 = cell(jcell)%attr(CELLCY) ! ! compute wave numbers for all frequencies ! call KSCIP1 (MSC, spcsig, dloc(1), kloc(1,1), arr, arr, arr) call KSCIP1 (MSC, spcsig, dloc(2), kloc(1,2), arr, arr, arr) call KSCIP1 (MSC, spcsig, dloc(3), kloc(1,3), arr, arr, arr) ! if ( IMUD == 1 ) then ! if (VARMUD) then dm(1) = mudl2(v(1)) dm(2) = mudl2(v(2)) dm(3) = mudl2(v(3)) endif ! call KSCIP2 (MSC, spcsig, dloc(1), kloc(1,1), arr, arr, arr, arr, dm(1)) call KSCIP2 (MSC, spcsig, dloc(2), kloc(1,2), arr, arr, arr, arr, dm(2)) call KSCIP2 (MSC, spcsig, dloc(3), kloc(1,3), arr, arr, arr, arr, dm(3)) ! endif ! ! determine wave number in centroid of next cell ! k1(:) = ( kloc(:,1) + kloc(:,2) + kloc(:,3) )/ 3. ! ! compute contribution to area of centroid dual ! area = area + x0*y1 - x1*y0 ! ! compute contribution to x-gradient of wave number ! dkdx(:) = dkdx(:) + ( k0(:) + k1(:) ) * real( y1 - y0 ) ! ! compute contribution to y-gradient of wave number ! dkdy(:) = dkdy(:) + ( k0(:) + k1(:) ) * real( x1 - x0 ) ! enddo ! ! if ratio between max and min depth is too large, set gradients to zero and skip to next vertex ! !if ( dpmax > drat * dpmin ) goto 30 ! ! if area is non-positive, give error and go to next vertex ! if ( .not. area > 0d0 ) then write (msgstr, '(a,i5)') ' Area of centroid dual is negative or zero in vertex ', ivert call msgerr( 2, trim(msgstr) ) return endif ! dkdx(:) = dkdx(:)/real(area) dkdy(:) = -dkdy(:)/real(area) ! ! in case of spherical coordinates, transform back to Cartesian coordinates ! if ( KSPHER > 0 ) then ! cslat = cos(DEGRAD*(vert(ivert)%attr(VERTY) + YOFFS)) ! dkdx(:) = dkdx(:)/(cslat * LENDEG) dkdy(:) = dkdy(:)/LENDEG ! endif ! return 30 dkdx = 0. dkdy = 0. ! endif ! end subroutine SwanGradDepthorK