! COMMON VARIABLES RELATED MODULES, file 1 of 3 ! ! Contents of this file ! ! OCPCOMM1 contains common variables for Ocean Pack ! OCPCOMM2 contains common variables for Ocean Pack ! OCPCOMM3 contains common variables for Ocean Pack ! OCPCOMM4 contains common variables for Ocean Pack ! SWCOMM1 contains common variables for SWAN ! SWCOMM2 contains common variables for SWAN ! SWCOMM3 contains common variables for SWAN ! SWCOMM4 contains common variables for SWAN ! TIMECOMM contains common variables for SWAN ! MODULE OCPCOMM1 ! ! ! --|-----------------------------------------------------------|-- ! | Delft University of Technology | ! | Faculty of Civil Engineering | ! | Environmental Fluid Mechanics Section | ! | P.O. Box 5048, 2600 GA Delft, The Netherlands | ! | | ! | Programmers: The SWAN team | ! --|-----------------------------------------------------------|-- ! ! ! SWAN (Simulating WAves Nearshore); a third generation wave model ! Copyright (C) 1993-2020 Delft University of Technology ! ! This program is free software; you can redistribute it and/or ! modify it under the terms of the GNU General Public License as ! published by the Free Software Foundation; either version 2 of ! the License, or (at your option) any later version. ! ! This program is distributed in the hope that it will be useful, ! but WITHOUT ANY WARRANTY; without even the implied warranty of ! MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ! GNU General Public License for more details. ! ! A copy of the GNU General Public License is available at ! http://www.gnu.org/copyleft/gpl.html#SEC3 ! or by writing to the Free Software Foundation, Inc., ! 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ! ! ! 0. Authors ! ! 40.41: Marcel Zijlema ! ! 1. Updates ! ! 40.41, Oct. 04: taken from the include file OCPCOMM1.INC ! ! 2. Purpose ! ! Common variables used by the Ocean Pack Service Routines and in SWAN ! ! 3. Method ! ! MODULE construct ! ! 4. Modules used ! ! --- ! IMPLICIT NONE ! ! 5. Argument variables ! ! --- ! ! 6. Parameter variables ! ! LINELN [ 180] max length of input lines (in command file) ! INTEGER LINELN PARAMETER (LINELN=180) ! ! 7. Local variables ! ! *** character data used by the command reading system *** ! ! BLANK [' '] blank string ! COMID [ '$'] character which distinguishes comments in the command input ! ELTEXT [ ] contents of the last string read by reading system ! ELTYPE [ ] type of the element last read by reading system ! ='CHAR'; last read data element is the string in ELTEXT ! ='EMPT; empty data field ! ='EOF'; end of file has been reached ! ='EOR'; end of repeat has been reached ! ='ERR'; incorrect data field was encountered ! ='INT'; last read data element is the integer in ELINT ! ='KEY'; last read data element is the keyword in KEYWRD ! ='OTHR'; other ! ='REAL'; last read data element is the real in ELREAL ! ='USED'; last read data element is processed, new can be read ! KAART [ ] contents of the input line last read by reading system ! KAR [ ] character last read by reading system ! =COMID; begin or end of comment ! =TABC; data element separation mark ! =' '; data element separation mark ! ='&'; continuation mark ! ='('; begin of data group ! ='*'; repetition mark ! =','; data element seperation mark (only for numbers) ! ='/'; end of repetition mark ! =':'; assignment mark ! =';'; end of record or input line ! ='='; assignment mark ! ='@'; end of file mark ! ='_'; continuation mark ! other: letter or digit to be processed by reading system ! KEYWRD [ ] contents of the last keyword read by reading system ! TABC [CALCUL] =CHAR(9); tabular character ! CHARACTER*4 BLANK CHARACTER COMID CHARACTER*(LINELN) ELTEXT CHARACTER*4 ELTYPE CHARACTER*(LINELN) KAART CHARACTER KAR CHARACTER*8 KEYWRD CHARACTER TABC ! ! *** numerical data used by the command reading system *** ! ! CHGVAL [ ] whether last read value is different from a given value for ! subroutines INREAL, ININTG, INCSTR, INCTIM ! ELINT [ ] last element read from user command, when integer ! KARNR [ ] position on the input line of character last processed ! by the reading system, ! =0; no characters read yet ! =81; next input line has to be read to the common KAART first ! LENCST [ ] length of the string stored in ELTEXT ! ELREAL [ ] last element read from user command, when real or double ! INTEGER ELINT, KARNR, LENCST DOUBLE PRECISION ELREAL LOGICAL CHGVAL ! ! *** origin for day and time *** ! ! REFDAY [ ] Day number of the reference day. The first day entered is used ! as reference day, the reference time is 0:00 of the reference day. ! INTEGER REFDAY ! ! 8. Subroutines and functions used ! ! --- ! ! 9. Subroutines and functions calling ! ! --- ! ! 10. Error messages ! ! --- ! ! 11. Remarks ! ! --- ! ! 12. Structure ! ! --- ! ! 13. Source text ! END MODULE OCPCOMM1 MODULE OCPCOMM2 ! ! ! --|-----------------------------------------------------------|-- ! | Delft University of Technology | ! | Faculty of Civil Engineering | ! | Environmental Fluid Mechanics Section | ! | P.O. Box 5048, 2600 GA Delft, The Netherlands | ! | | ! | Programmers: The SWAN team | ! --|-----------------------------------------------------------|-- ! ! ! SWAN (Simulating WAves Nearshore); a third generation wave model ! Copyright (C) 1993-2020 Delft University of Technology ! ! This program is free software; you can redistribute it and/or ! modify it under the terms of the GNU General Public License as ! published by the Free Software Foundation; either version 2 of ! the License, or (at your option) any later version. ! ! This program is distributed in the hope that it will be useful, ! but WITHOUT ANY WARRANTY; without even the implied warranty of ! MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ! GNU General Public License for more details. ! ! A copy of the GNU General Public License is available at ! http://www.gnu.org/copyleft/gpl.html#SEC3 ! or by writing to the Free Software Foundation, Inc., ! 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ! ! ! 0. Authors ! ! 40.41: Marcel Zijlema ! ! 1. Updates ! ! 40.41, Oct. 04: taken from the include file OCPCOMM2.INC ! ! 2. Purpose ! ! Common variables used by the Ocean Pack Service Routines and in SWAN ! ! 3. Method ! ! MODULE construct ! ! 4. Modules used ! ! --- ! IMPLICIT NONE ! ! 5. Argument variables ! ! --- ! ! 6. Parameter variables ! ! LENFNM [ 140] length of file names (including path) ! INTEGER LENFNM PARAMETER (LENFNM=140) ! ! 7. Local variables ! ! *** names and other character strings *** ! ! DIRCH1 [\ ] directory separation character as appears in input file ! DIRCH2 [\ ] directory separation character replacing DIRCH1 ! FILEA [ ] not used ! FILEB [ ] not used ! FILENM [ ] file name of the file currently used for I/O ! INST ['Delft University of Technology'] name of the institute ! Can be changed in the file SWANINIT ! PROJID ['SWAN'] acronym of the project for which the computation is taking place ! ='NAME'; set by command PROJ 'NAME' ... ! PROJNR [CALCUL] =BLANK; run number for the computation ! ='NR'; set by command PROJ ... 'NR' ... ! PROJT1 [CALCUL] =BLANK; 1st line of the project title ! ='title1'; set by command PROJ ... 'title1' ... ! PROJT2 [CALCUL] =BLANK; 2nd line of the project title ! ='title2'; set by command PROJ ... 'title2' ... ! PROJT3 [CALCUL] =BLANK; 3rd line of the project title ! ='title3'; set by command PROJ ... 'title3' ! PTITLE [ ] not used ! VERTXT [calcul] program version, character representation ! CHARACTER (LEN=1) :: DIRCH1, DIRCH2 CHARACTER (LEN=LENFNM) :: FILEA , FILEB , FILENM CHARACTER (LEN=40) :: INST CHARACTER (LEN=16) :: PROJID CHARACTER (LEN=4) :: PROJNR CHARACTER (LEN=72) :: PROJT1, PROJT2, PROJT3 CHARACTER (LEN=36) :: PTITLE CHARACTER (LEN=20) :: VERTXT ! ! 8. Subroutines and functions used ! ! --- ! ! 9. Subroutines and functions calling ! ! --- ! ! 10. Error messages ! ! --- ! ! 11. Remarks ! ! --- ! ! 12. Structure ! ! --- ! ! 13. Source text ! END MODULE OCPCOMM2 MODULE OCPCOMM3 ! ! ! --|-----------------------------------------------------------|-- ! | Delft University of Technology | ! | Faculty of Civil Engineering | ! | Environmental Fluid Mechanics Section | ! | P.O. Box 5048, 2600 GA Delft, The Netherlands | ! | | ! | Programmers: The SWAN team | ! --|-----------------------------------------------------------|-- ! ! ! SWAN (Simulating WAves Nearshore); a third generation wave model ! Copyright (C) 1993-2020 Delft University of Technology ! ! This program is free software; you can redistribute it and/or ! modify it under the terms of the GNU General Public License as ! published by the Free Software Foundation; either version 2 of ! the License, or (at your option) any later version. ! ! This program is distributed in the hope that it will be useful, ! but WITHOUT ANY WARRANTY; without even the implied warranty of ! MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ! GNU General Public License for more details. ! ! A copy of the GNU General Public License is available at ! http://www.gnu.org/copyleft/gpl.html#SEC3 ! or by writing to the Free Software Foundation, Inc., ! 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ! ! ! 0. Authors ! ! 40.41: Marcel Zijlema ! ! 1. Updates ! ! 40.41, Oct. 04: taken from the include file OCPCOMM3.INC ! ! 2. Purpose ! ! Common variables used by the Ocean Pack Service Routines and in SWAN ! ! 3. Method ! ! MODULE construct ! ! 4. Modules used ! ! --- ! IMPLICIT NONE ! ! 5. Argument variables ! ! --- ! ! 6. Parameter variables ! ! --- ! ! 7. Local variables ! ! *** data for output, mainly plotting *** ! ! DXQ [ ] mesh size of the output frame in X-direction ! =0.01; if MXQ=1 ! =XQLEN/(MXQ-1); if MXQ>1 ! DYQ [ ] mesh size of the output frame in Y-direction ! =0.01; if MYQ=1 ! =YQLEN/(MYQ-1); if MYQ>1 ! MXQ [CALCUL] number of grid points of the output frame in X-direction ! MYQ [CALCUL] number of grid points of the output frame in Y-direction ! VERNUM [ 40.41] version number of SWAN ! INTEGER MXQ, MYQ REAL DXQ, DYQ, VERNUM ! ! 8. Subroutines and functions used ! ! --- ! ! 9. Subroutines and functions calling ! ! --- ! ! 10. Error messages ! ! --- ! ! 11. Remarks ! ! --- ! ! 12. Structure ! ! --- ! ! 13. Source text ! END MODULE OCPCOMM3 MODULE OCPCOMM4 ! ! ! --|-----------------------------------------------------------|-- ! | Delft University of Technology | ! | Faculty of Civil Engineering | ! | Environmental Fluid Mechanics Section | ! | P.O. Box 5048, 2600 GA Delft, The Netherlands | ! | | ! | Programmers: The SWAN team | ! --|-----------------------------------------------------------|-- ! ! ! SWAN (Simulating WAves Nearshore); a third generation wave model ! Copyright (C) 1993-2020 Delft University of Technology ! ! This program is free software; you can redistribute it and/or ! modify it under the terms of the GNU General Public License as ! published by the Free Software Foundation; either version 2 of ! the License, or (at your option) any later version. ! ! This program is distributed in the hope that it will be useful, ! but WITHOUT ANY WARRANTY; without even the implied warranty of ! MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ! GNU General Public License for more details. ! ! A copy of the GNU General Public License is available at ! http://www.gnu.org/copyleft/gpl.html#SEC3 ! or by writing to the Free Software Foundation, Inc., ! 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ! ! ! 0. Authors ! ! 40.41: Marcel Zijlema ! ! 1. Updates ! ! 40.41, Oct. 04: taken from the include file OCPCOMM4.INC ! ! 2. Purpose ! ! Common variables used by the Ocean Pack Service Routines and in SWAN ! ! 3. Method ! ! MODULE construct ! ! 4. Modules used ! ! --- ! IMPLICIT NONE ! ! 5. Argument variables ! ! --- ! ! 6. Parameter variables ! ! INAN [ 1] integer representing not a number ! RNAN [ 1] real representing not a number ! INTEGER INAN REAL RNAN PARAMETER (INAN=-1073750760, & RNAN=-1.07374515E+09) ! ! 7. Local variables ! ! *** file unit reference numbers *** ! ! EXPORT [ ] not used ! FUNHI [CAL] highest free unit number ! =IUNMAX ! FUNLO [ 21] lowest free unit number ! HIOPEN [ ] highest unit number of an open file ! IMPORT [ ] not used ! INPUTF [ 3] unit number for the file with command input ('INPUT') ! set by file SWANINIT ! ITMOPT [ 1] time coding option ! =1; ???? ! =3; ???? ! set by file SWANINIT ! IUNMIN [ 0] minimum unit number ! IUNMAX [ 99] maximum unit number ! set by file SWANINIT ! PRINTF [ 4] unit number for the file with standard output ('PRINT') ! set by file SWANINIT ! PRTEST [CAL] unit number for the print file containing test output ! =PRINTF ! set by file SWANINIT ! SCREEN [ 6] unit number for the screen ! (is for batch-oriented systems equal to PRINTF) ! INTEGER EXPORT, FUNHI , FUNLO , HIOPEN INTEGER IMPORT, INPUTF, ITMOPT, IUNMAX INTEGER IUNMIN, PRINTF, PRTEST, SCREEN ! *** test parameters *** ! ! ITEST [ 0] indicates the amount of test output requested ! =30; for command TEST ! =itest; set by command TEST [itest] [itrace] ! ITRACE [ 0] a message is printed up to ITRACE times ! =itrace; set by command TEST [itest] [itrace] ! LEVERR [ 0] severity of the errors encountered. ! LTRACE [.F.] indicates whether to call STRACE ! =.T.; when ITRACE>0 ! MAXERR [ 1] maximum severity of errors allowed, if larger no computation ! =1; warnings ! =2; errors ! =3; severe errors ! =4; terminating errors ! =maxerr; set by command SET ... [maxerr] ... ! INTEGER ITEST, ITRACE, LEVERR, MAXERR LOGICAL LTRACE ! ! 8. Subroutines and functions used ! ! --- ! ! 9. Subroutines and functions calling ! ! --- ! ! 10. Error messages ! ! --- ! ! 11. Remarks ! ! --- ! ! 12. Structure ! ! --- ! ! 13. Source text ! END MODULE OCPCOMM4 MODULE SWCOMM1 ! ! ! --|-----------------------------------------------------------|-- ! | Delft University of Technology | ! | Faculty of Civil Engineering | ! | Environmental Fluid Mechanics Section | ! | P.O. Box 5048, 2600 GA Delft, The Netherlands | ! | | ! | Programmers: The SWAN team | ! --|-----------------------------------------------------------|-- ! ! ! SWAN (Simulating WAves Nearshore); a third generation wave model ! Copyright (C) 1993-2020 Delft University of Technology ! ! This program is free software; you can redistribute it and/or ! modify it under the terms of the GNU General Public License as ! published by the Free Software Foundation; either version 2 of ! the License, or (at your option) any later version. ! ! This program is distributed in the hope that it will be useful, ! but WITHOUT ANY WARRANTY; without even the implied warranty of ! MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ! GNU General Public License for more details. ! ! A copy of the GNU General Public License is available at ! http://www.gnu.org/copyleft/gpl.html#SEC3 ! or by writing to the Free Software Foundation, Inc., ! 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ! ! ! 0. Authors ! ! 40.41: Marcel Zijlema ! 40.51: Marcel Zijlema ! 40.61: Marcel Zijlema ! 40.64: Marcel Zijlema ! 41.12: Nico Booij ! ! 1. Updates ! ! 40.41, Oct. 04: taken from the include file SWCOMM1.INC ! 40.21, Apr. 04: NMOVAR increased by 1 ! (reserved for diffraction) ! 40.35, Jun. 04: NMOVAR increased by 2 (quantities DISTUR ! and TURB added) ! 40.41, Sep. 04: NMOVAR increased by 2 (quantities TMM10 ! and RTMM10 added) ! 40.51, Feb. 05: NMOVAR increased by 1 (quantity TMBOT added) ! 40.51, Sep. 05: NMOVAR increased by 2 (quantities WATLEV ! and BOTLEV added) ! 40.51, Feb. 06: NMOVAR increased by 1 (quantity TPS added) ! 40.61, Sep. 06: NMOVAR increased by 3 (quantities DISBOT, ! DISSRF and DISWCP added) ! 40.61, Sep. 06: NMOVAR increased by 1 (quantity DISMUD added) ! 40.61, Sep. 06: NMOVAR increased by 1 (quantity DISVEG added) ! 40.64, Apr. 07: NMOVAR increased by 2 (quantities QP and BFI added) ! 40.85, Aug. 08: NMOVAR increased by 10 (quantities GENE, GENW, REDI, REDQ, REDT, ! PROPA, PROPX, PROPT, PROPS and RADS added) ! 41.12, Apr. 10: NMOVAR increased by 1 (quantity NPL added) ! 41.15, Mar. 11: NMOVAR increased by 1 (quantity LWAVP added) ! 41.72, Nov. 19: MOUTPA increased by 1 (quantity NOSWLL) ! ! 2. Purpose ! ! Common variables used by the subroutines in SWAN ! ! 3. Method ! ! MODULE construct ! ! 4. Modules used ! ! --- ! IMPLICIT NONE ! ! 5. Argument variables ! ! --- ! ! 6. Parameter variables ! ! NMOVAR [ 171] maximum number of output variables 41.62 40.85 40.64 40.61 40.51 40.21 40.41 ! MOUTPA [ 51] number of output parameters 41.72 40.87 ! INTEGER NMOVAR, MOUTPA PARAMETER (NMOVAR = 171, MOUTPA=51) 41.72 41.62 40.35 41.15 40.85 40.87 40.64 40.61 40.51 40.21 40.41 ! ! 7. Local variables ! ! *** names and other character data *** ! ! CHTIME [ ' '] character string representation of date-time of computation ! FNEST [CALCULAT] BCF (=BLANK), name of nest file ! OVKEYW(NMOVAR) keyword identifying output quantity in a SWAN command ! ( 1) [ 'XP'] ! ( 2) [ 'YP'] ! ( 3) [ 'DIST'] ! ( 4) [ 'DEP'] ! ( 5) [ 'VEL'] ! ( 6) [ 'UBOT'] ! ( 7) [ 'DISS'] ! ( 8) [ 'QB'] ! ( 9) [ 'LEA'] ! (10) [ 'HS'] ! (11) [ 'TM01'] ! (12) [ 'RTP'] ! (13) [ 'DIR'] ! (14) [ 'PDI'] ! (15) [ 'TDI'] ! (16) [ 'DSPR'] ! (17) [ 'WLEN'] ! (18) [ 'STEE'] ! (19) [ 'TRA'] ! (20) [ 'FOR'] ! (21) [' '] ! (22) [' '] ! (23) [' '] ! (24) [ 'XC'] ! (25) [ 'YC'] ! (26) [ 'WIND'] ! (27) [ 'FRC'] ! (28) [ 'RTM01'] ! (29) [' '] ! (30) [ 'DHS'] ! (31) ['DRTM01'] ! (32) [ 'TM02'] ! (33) [ 'FSPR'] ! (34) [ 'URMS'] ! (35) [ 'UFRI'] ! (36) [ 'ZLEN'] ! (37) [ 'TAUW'] ! (38) [ 'CDRAG'] ! (39) [ 'SETUP'] ! (40) [ 'TIME'] ! (41) [ 'TSEC'] ! (47) [ 'TMM10'] ! (48) ['RTMM10'] ! (49) ['DIFPAR') ! (50) [ 'TMBOT'] ! (51) [ 'WATL'] ! (52) [ 'BOTL'] ! (53) [ 'TPS'] ! (54) [ 'DISB'] ! (55) [ 'DISSU'] ! (56) [ 'DISW'] ! (57) [ 'DISV'] ! (58) [ 'QP'] ! (59) [ 'BFI'] ! (60) [ 'GENE'] ! (61) [ 'GENW'] ! (62) [ 'REDI'] ! (63) [ 'REDQ'] ! (64) [ 'REDT'] ! (65) [ 'PROPA'] ! (66) [ 'PROPX'] ! (67) [ 'PROPT'] ! (68) [ 'PROPS'] ! (69) [ 'RADS'] ! (70) [ 'NPL'] ! (71) [ 'LWAVP'] ! (72) [ 'DISTU'] ! (73) [ 'TURB'] ! (74) [ 'DISM'] ! (75) [ 'DISSL'] ! (76) ['DISICE'] ! (77) [ 'AICE'] ! (78) [ 'HICE'] ! (79) [ 'FHSWE'] ! OVSNAM(NMOVAR) short name of output quantity ! ( 1) [ 'Xp'] ! ( 2) [ 'Yp'] ! ( 3) [ 'Dist'] ! ( 4) [ 'Depth'] ! ( 5) [ 'Vel'] ! ( 6) [ 'Ubot'] ! ( 7) ['Dissip'] ! ( 8) [ 'Qb'] ! ( 9) [ 'Leak'] ! (10) [ 'Hs'] ! (11) [ 'Tm01'] ! (12) [ 'Tpeak'] ! (13) [ 'Dir'] ! (14) [ 'PkDir'] ! (15) [ 'TDir'] ! (16) [ 'Dspr'] ! (17) [ 'Wlen'] ! (18) ['Steepn'] ! (19) ['Transp'] ! (20) ['WForce'] ! (21) ['AcDens'] ! (22) ['EnDens'] ! (23) [ 'Aux'] ! (24) [ 'Xc'] ! (25) [ 'Yc'] ! (26) [ 'Windv'] ! (27) ['FrCoef'] ! (28) [ 'RTm01'] ! (29) ['EnDens'] ! (30) [ 'dHs'] ! (31) [ 'dTm'] ! (32) [ 'Tm02'] ! (33) [ 'FSpr'] ! (34) [ 'Urms'] ! (35) [ 'Ufric'] ! (36) [ 'Zlen'] ! (37) [ 'TauW'] ! (38) [ 'Cdrag'] ! (39) [ 'Setup'] ! (40) [ 'Time'] ! (41) [ 'Tsec'] ! (47) [ 'Tm_10'] ! (48) ['RTm_10'] ! (49) ['DifPar'] ! (50) [ 'TmBot'] ! (51) ['Watlev'] ! (52) ['Botlev'] ! (53) ['TPsmoo'] ! (54) [ 'Sfric'] ! (55) [ 'Ssurf'] ! (56) [ 'Swcap'] ! (57) [ 'Sveg'] ! (58) [ 'Qp'] ! (59) [ 'BFI'] ! (60) ['Genera'] ! (61) [ 'Swind'] ! (62) ['Redist'] ! (63) [ 'Snl4'] ! (64) [ 'Snl3'] ! (65) ['Propag'] ! (66) ['Propxy'] ! (67) ['Propth'] ! (68) ['Propsi'] ! (69) ['Radstr'] ! (70) ['Nplant'] ! (71) [ 'Lwavp'] ! (72) [ 'Stur'] ! (73) [ 'Turb'] ! (74) [ 'Smud'] ! (75) ['Sswell'] ! (76) [ 'Sice'] ! (77) [' aice'] ! (78) [' hice'] ! (79) ['FHswel'] ! OVLNAM(NMOVAR) long name of output quantity ! ( 1) [ 'X user coordinate'] ! ( 2) [ 'Y user coordinate'] ! ( 3) [ 'distance along output curve'] ! ( 4) [ 'Depth'] ! ( 5) [ 'Current velocity'] ! ( 6) [ 'Orbital velocity at the bottom'] ! ( 7) [ 'Energy dissipation'] ! ( 8) [ 'Fraction breaking waves'] ! ( 9) [ 'Energy leak over spectral boundaries'] ! (10) [ 'Significant wave height'] ! (11) [ 'Average absolute wave period'] ! (12) [ 'Peak period'] ! (13) [ 'Average wave direction'] ! (14) [ 'direction of the peak of the spectrum'] ! (15) [ 'direction of the energy transport'] ! (16) [ 'directional spreading'] ! (17) [ 'Average wave length'] ! (18) [ 'Wave steepness'] ! (19) [ 'Wave energy transport'] ! (20) [ 'Wave driven force per unit surface'] ! (21) [ 'spectral action density'] ! (22) [ 'spectral energy density'] ! (23) [ 'auxiliary variable'] ! (24) [ 'X computational grid coordinate'] ! (25) [ 'Y computational grid coordinate'] ! (26) [ 'Wind velocity at 10 m above sea level'] ! (27) [ 'Bottom friction coefficient'] ! (28) [ 'Average relative wave period'] ! (29) [ 'energy density integrated over direction'] ! (30) [ 'difference in Hs between iterations'] ! (31) [ 'difference in Tm between iterations'] ! (32) [ 'Zero-crossing period'] ! (33) [ 'Frequency spectral width (Kappa)'] ! (34) [ 'RMS of orbital velocity at the bottom'] ! (35) [ 'Friction velocity'] ! (40) [ 'Date-time'] ! (41) [ 'Time in seconds from reference time'] ! (36) ['Zero velocity thickness of boundary layer'] ! (37) [ ' '] ! (38) [ 'Drag coefficient'] ! (39) [ 'Setup due to waves'] ! (47) [ 'Average absolute wave period'] ! (48) [ 'Average relative wave period'] ! (49) [ 'Diffraction parameter'] ! (50) [ 'Bottom wave period'] ! (51) [ 'Water level'] ! (52) [ 'Bottom level'] ! (53) [ 'Relative peak period (smooth)'] ! (54) [ 'Bottom friction dissipation'] ! (55) [ 'Surf breaking dissipation'] ! (56) [ 'Whitecapping dissipation'] ! (57) [ 'Vegetation dissipation'] ! (58) [ 'Peakedness'] ! (59) [ 'Benjamin-Feir index'] ! (60) [ 'Energy generation'] ! (61) [ 'Wind source term'] ! (62) [ 'Energy redistribution'] ! (63) [ 'Total absolute 4-wave interaction'] ! (64) [ 'Total absolute 3-wave interaction'] ! (65) [ 'Energy propagation'] ! (66) [ 'xy-propagation'] ! (67) [ 'theta-propagation'] ! (68) [ 'sigma-propagation'] ! (69) [ 'Radiation stress'] ! (70) [ 'Plants per m2'] ! (71) [ 'Peak wave length'] ! (72) [ 'Turbulent dissipation'] ! (73) [ 'Turbulent viscosity'] ! (74) [ 'Fluid mud dissipation'] ! (75) [ 'Swell dissipation'] ! (76) [ 'Sea ice dissipation'] ! (77) [ 'ice concentration (fraction)'] ! (78) [ 'ice thickness'] ! (79) [ 'FEWS Hm0 swell'] ! OVUNIT(NMOVAR) unit of of output quantity ! ( 1) [CALCULAT] =UL ! ( 2) [CALCULAT] =UL ! ( 3) [CALCULAT] =UL ! ( 4) [CALCULAT] =UH ! ( 5) [CALCULAT] =UV ! ( 6) [CALCULAT] =UV ! ( 7) [ 'm2/s'] change to UDL ???, changed to 'W/m2', if INRHOG=1 ! ( 8) [ ' '] ! ( 9) [ 'm2/s'] change to UDL ???, changed to 'W/m2', if INRHOG=1 ! (10) [CALCULAT] =UH ! (11) [CALCULAT] =UT ! (12) [CALCULAT] =UT ! (13) [CALCULAT] =UDI ! (14) [CALCULAT] =UDI ! (15) [CALCULAT] =UDI ! (16) [CALCULAT] =UDI ! (17) [CALCULAT] =UL ! (18) [ ' '] ! (19) [ 'm2s'] changed to 'W/m' (=UP), if INRHOG=1 ! (20) [CALCULAT] =UF ! (21) [ 'm2s'] changed to 'Js/m2', if INRHOG=1 ! (22) [ 'm2'] changed to 'J/m2', if INRHOG=1 ! (23) [ ' '] ! (24) [ ' '] ! (25) [ ' '] ! (26) [CALCULAT] =UV ! (27) [ ' '] ! (28) [CALCULAT] =UT ! (29) [ 'm2'] changed to 'J/m2', if INRHOG=1 ! (30) [CALCULAT] =UH ! (31) [CALCULAT] =UT ! (32) [CALCULAT] =UT ! (33) [ ' '] ! (34) [CALCULAT] =UV ! (35) [CALCULAT] =UV ! (36) [CALCULAT] =UL ! (37) [ ' '] ! (38) [ ' '] ! (39) [ 'm'] ! (40) [ ' '] ! (41) [ 's'] ! (47) [CALCULAT] =UT ! (48) [CALCULAT] =UT ! (49) [ ' '] ! (50) [CALCULAT] =UT ! (51) [CALCULAT] =UH ! (52) [CALCULAT] =UH ! (53) [CALCULAT] =UT ! (54) [ 'm2/s'] change to UDL ???, changed to 'W/m2', if INRHOG=1 ! (55) [ 'm2/s'] change to UDL ???, changed to 'W/m2', if INRHOG=1 ! (56) [ 'm2/s'] change to UDL ???, changed to 'W/m2', if INRHOG=1 ! (57) [ 'm2/s'] change to UDL ???, changed to 'W/m2', if INRHOG=1 ! (58) [ ' '] ! (59) [ ' '] ! (60) [ 'm2/s'] change to UDL ???, changed to 'W/m2', if INRHOG=1 ! (61) [ 'm2/s'] change to UDL ???, changed to 'W/m2', if INRHOG=1 ! (62) [ 'm2/s'] change to UDL ???, changed to 'W/m2', if INRHOG=1 ! (63) [ 'm2/s'] change to UDL ???, changed to 'W/m2', if INRHOG=1 ! (64) [ 'm2/s'] change to UDL ???, changed to 'W/m2', if INRHOG=1 ! (65) [ 'm2/s'] change to UDL ???, changed to 'W/m2', if INRHOG=1 ! (66) [ 'm2/s'] change to UDL ???, changed to 'W/m2', if INRHOG=1 ! (67) [ 'm2/s'] change to UDL ???, changed to 'W/m2', if INRHOG=1 ! (68) [ 'm2/s'] change to UDL ???, changed to 'W/m2', if INRHOG=1 ! (69) [ 'm2/s'] change to UDL ???, changed to 'W/m2', if INRHOG=1 ! (70) [ '1/m2'] ! (71) [CALCULAT] =UL ! (72) [ 'm2/s'] change to UDL ???, changed to 'W/m2', if INRHOG=1 ! (73) [ 'm2/s'] change to UDL ???, changed to 'W/m2', if INRHOG=1 ! (74) [ 'm2/s'] change to UDL ???, changed to 'W/m2', if INRHOG=1 ! (75) [ 'm2/s'] change to UDL ???, changed to 'W/m2', if INRHOG=1 ! (76) [ 'm2/s'] changes to 'W/m2' if INRHOG=1 ! (77) [ ' '] ! (78) [ 'm'] ! (79) [ 'UH'] ! SNAME [ ] name of output point set ! UAP [ 'W/m2'] unit of dissipation ! UD [ ] not used ! UDI [ 'degr'] unit of direction ! UDL [ 'm2/s'] unit of dissipation ! UET [ 'm3/s'] unit of energy transport, and wave force ! UF [ 'N/m2'] unit of pressure or shear stress (force per area) ! UH [ 'm'] unit of vertical length ! UL [ 'm'] unit of horizontal length ! UP [ 'W/m'] unit of energy flux density ! UST [ 'm2/s2'] not used ! UT [ 'sec'] unit of time (change to s ???) ! UV [ 'm/s'] unit of velocity ! CHARACTER*20 CHTIME CHARACTER*36 FBCL, FBCR, FNEST CHARACTER*8 OVKEYW(NMOVAR) CHARACTER*40 OVLNAM(NMOVAR) CHARACTER*6 OVSNAM(NMOVAR) CHARACTER*16 OVUNIT(NMOVAR) CHARACTER*8 SNAME CHARACTER*6 UAP, UD, UDI, UDL CHARACTER*6 UET, UF, UH, UL CHARACTER*6 UP, UST, UT, UV ! *** information for output *** ! ! AKPOWR [ ] power in expression for computation of average wave number ! =kpower; set by command SET ... [kpower] ... (not documented) ! ALCQ [ ] angle between x-axes of computational grid and output frame ! ALPQ [ ] angle between x-axes of user coord. system and output frame ! COSCQ [ ] cos of ALCQ ! COSPQ [ ] cos of ALPQ ! DXK [ ] mesh size of output frame ! DYK [ ] mesh size of output frame ! ERRPTS [ ] unit ref. number of file containing coord. of "problem points" ! =16, unit reference number of the file ! INRHOG [ 0] indicates the choice for output based on "variance" or "true energy" ! =0, output based on variance ! =1, output based on true energy ! IUBOTR [ 0] set to 1, when IVTYPE=6 or 18 ! OVSVTY(NMOVAR) type of the output variable ! =1, scalar ! =2, angle ! =3, vector ! =4, tensor ! =5, fully spectral quantity ! =6, directional spectral quantity ! ( 1) [ 1] Xp ! ( 2) [ 1] Yp ! ( 3) [ 1] Dist ! ( 4) [ 1] Depth ! ( 5) [ 3] Vel ! ( 6) [ 1] Ubot ! ( 7) [ 1] Dissip ! ( 8) [ 1] Qb ! ( 9) [ 1] Leak ! (10) [ 1] Hs ! (11) [ 1] Tm01 ! (12) [ 1] Tpeak ! (13) [ 2] Dir ! (14) [ 2] PkDir ! (15) [ 2] TDir ! (16) [ 1] Dspr ! (17) [ 1] Wlen ! (18) [ 1] Steepn ! (19) [ 3] Transp ! (20) [ 3] WForce ! (21) [ 5] AcDens ! (22) [ 5] EnDens ! (23) [ 1] Aux ! (24) [ 1] Xc ! (25) [ 1] Yc ! (26) [ 3] Windv ! (27) [ 1] FrCoef ! (28) [ 1] RTm01 ! (29) [ 5] EnDens ! (30) [ 1] dHs ! (31) [ 1] dTm ! (32) [ 1] Tm02 ! (33) [ 1] FSpr ! (34) [ 1] Urms ! (35) [ 1] Ufric ! (36) [ 1] Zlen ! (37) [ 1] TauW ! (38) [ 1] Cdrag ! (39) [ 1] Setup ! (47) [ 1] Tm_10 ! (48) [ 1] RTm_10 ! (49) [ 1] DifPar ! (50) [ 1] TmBot ! (51) [ 1] Watlev ! (52) [ 1] Botlev ! (53) [ 1] TPSmoo ! (54) [ 1] Sfric ! (55) [ 1] Ssurf ! (56) [ 1] Swcap ! (57) [ 1] Sveg ! (58) [ 1] Qp ! (59) [ 1] BFI ! (60) [ 1] Genera ! (61) [ 1] Swind ! (62) [ 1] Redist ! (63) [ 1] Snl4 ! (64) [ 1] Snl3 ! (65) [ 1] Propag ! (66) [ 1] Propxy ! (67) [ 1] Propth ! (68) [ 1] Propsi ! (69) [ 1] Radstr ! (70) [ 1] Nplant ! (71) [ 1] Lwavp ! (72) [ 1] Stur ! (73) [ 1] Turb ! (74) [ 1] Smud ! (75) [ 1] Sswell ! (76) [ 1] Sice ! (77) [ 1] aice ! (78) [ 1] hice ! (79) [ 1] fhswe ! OVEXCV(NMOVAR) exception value for output quantity ! ( 1) [ -1.E10] Xp ! ( 2) [ -1.E10] Yp ! ( 3) [ -999.] Dist ! ( 4) [ -99.] Depth ! ( 5) [ 0.] Vel ! ( 6) [ -10.] Ubot ! ( 7) [ -10.] Dissip ! ( 8) [ -1.] Qb ! ( 9) [ -10.] Leak ! (10) [ -10.] Hs ! (11) [ -10.] Tm01 ! (12) [ -10.] Tpeak ! (13) [ -999.] Dir ! (14) [ -999.] PkDir ! (15) [ -999.] TDir ! (16) [ -10.] Dspr ! (17) [ -10.] Wlen ! (18) [ -1.] Steepn ! (19) [ 0.] Transp ! (20) [ 0.] WForce ! (21) [ -100.] AcDens ! (22) [ -100.] EnDens ! (23) [ -1.E10] Aux ! (24) [ -1.E10] Xc ! (25) [ -1.E10] Yc ! (26) [ 0.] Windv ! (27) [ -1.] FrCoef ! (28) [ -10.] RTm01 ! (29) [ -100.] EnDens ! (30) [ -10.] dHs ! (31) [ -10.] dTm ! (32) [ -10.] Tm02 ! (33) [ -1.] FSpr ! (34) [ -10.] Urms ! (35) [ -10.] Ufric ! (36) [ -1.] Zlen ! (37) [ -10.] TauW ! (38) [ -1.] Cdrag ! (39) [ -9.] Setup ! (47) [ -9.] Tm_10 ! (48) [ -9.] RTm_10 ! (49) [ -99.] DifPar ! (50) [ -9.] TmBot ! (51) [ -99.] Watlev ! (52) [ -99.] Botlev ! (53) [ -10.] TPSmoo ! (54) [ -9.] Sfric ! (55) [ -9.] Ssurf ! (56) [ -9.] Swcap ! (57) [ -9.] Sveg ! (58) [ -9.] Qp ! (59) [ -9.] BFI ! (60) [ -9.] Genera ! (61) [ -9.] Swind ! (62) [ -9.] Redist ! (63) [ -9.] Snl4 ! (64) [ -9.] Snl3 ! (65) [ -9.] Propag ! (66) [ -9.] Propxy ! (67) [ -9.] Propth ! (68) [ -9.] Propsi ! (69) [ -9.] Radstr ! (70) [ -9.] Nplant ! (71) [ -9.] Lwavp ! (72) [ -9.] Stur ! (73) [ -99.] Turb ! (74) [ -9.] Smud ! (75) [ -9.] Sswell ! (76) [ -9.] Sice ! (77) [ -9.] aice ! (78) [ -9.] hice ! (79) [ 100.] fhswe ! OVLEXP(NMOVAR) lower expected limit of output quantity ! ( 1) [ -1.E10] Xp ! ( 2) [ -1.E10] Yp ! ( 3) [ 0.] Dist ! ( 4) [ -100.] Depth ! ( 5) [ -2.] Vel ! ( 6) [ 0.] Ubot ! ( 7) [ 0.] Dissip ! ( 8) [ 0.] Qb ! ( 9) [ 0.] Leak ! (10) [ 0.] Hs ! (11) [ 0.] Tm01 ! (12) [ 0.] Tpeak ! (13) [ 0.] Dir ! (14) [ 0.] PkDir ! (15) [ 0.] TDir ! (16) [ 0.] Dspr ! (17) [ 0.] Wlen ! (18) [ 0.] Steepn ! (19) [ -10.] Transp ! (20) [ -10.] WForce ! (21) [ 0.] AcDens ! (22) [ 0.] EnDens ! (23) [ -1.E10] Aux ! (24) [ -100.] Xc ! (25) [ -100.] Yc ! (26) [ -50.] Windv ! (27) [ 0.] FrCoef ! (28) [ 0.] RTm01 ! (29) [ 0.] EnDens ! (30) [ 0.] dHs ! (31) [ 0.] dTm ! (32) [ 0.] Tm02 ! (33) [ 0.] FSpr ! (34) [ 0.] Urms ! (35) [ 0.] Ufric ! (36) [ 0.] Zlen ! (37) [ 0.] TauW ! (38) [ 0.] Cdrag ! (39) [ -1.] Setup ! (47) [ 0.] Tm_10 ! (48) [ 0.] RTm_10 ! (49) [ -10.] DifPar ! (50) [ 0.] TmBot ! (51) [ -100.] Watlev ! (52) [ -100.] Botlev ! (53) [ 0.] TPSmoo ! (54) [ 0.] Sfric ! (55) [ 0.] Ssurf ! (56) [ 0.] Swcap ! (57) [ 0.] Sveg ! (58) [ 0.] Qp ! (59) [ 0.] BFI ! (60) [ 0.] Genera ! (61) [ 0.] Swind ! (62) [ 0.] Redist ! (63) [ 0.] Snl4 ! (64) [ 0.] Snl3 ! (65) [ 0.] Propag ! (66) [ 0.] Propxy ! (67) [ 0.] Propth ! (68) [ 0.] Propsi ! (69) [ 0.] Radstr ! (70) [ 0.] Nplant ! (71) [ 0.] Lwavp ! (72) [ 0.] Stur ! (73) [ 0.] Turb ! (74) [ 0.] Smud ! (75) [ 0.] Sswell ! (76) [ 0.] Sice ! (77) [ 0.] aice ! (78) [ 0.] hice ! (79) [ 0.] fhswell ! OVLLIM(NMOVAR) lower limit of validity of output quantity ! ( 1) [ -1.E10] Xp ! ( 2) [ -1.E10] Yp ! ( 3) [ 0.] Dist ! ( 4) [ -1.E4] Depth ! ( 5) [ -100.] Vel ! ( 6) [ 0.] Ubot ! ( 7) [ 0.] Dissip ! ( 8) [ 0.] Qb ! ( 9) [ 0.] Leak ! (10) [ 0.] Hs ! (11) [ 0.] Tm01 ! (12) [ 0.] Tpeak ! (13) [ 0.] Dir ! (14) [ 0.] PkDir ! (15) [ 0.] TDir ! (16) [ 0.] Dspr ! (17) [ 0.] Wlen ! (18) [ 0.] Steepn ! (19) [ -100.] Transp ! (20) [ -1.E5] WForce ! (21) [ 0.] AcDens ! (22) [ 0.] EnDens ! (23) [ -1.E10] Aux ! (24) [ -1000.] Xc ! (25) [ -1000.] Yc ! (26) [ -100.] Windv ! (27) [ 0.] FrCoef ! (28) [ 0.] RTm01 ! (29) [ 0.] EnDens ! (30) [ 0.] dHs ! (31) [ 0.] dTm ! (32) [ 0.] Tm02 ! (33) [ 0.] FSpr ! (34) [ 0.] Urms ! (35) [ 0.] Ufric ! (36) [ 0.] Zlen ! (37) [ 0.] TauW ! (38) [ 0.] Cdrag ! (39) [ -1.] Setup ! (47) [ 0.] Tm_10 ! (48) [ 0.] RTm_10 ! (49) [ -50.] DifPar ! (50) [ 0.] TmBot ! (51) [ -1.E4] Watlev ! (52) [ -1.E4] Botlev ! (53) [ 0.] TPSmoo ! (54) [ 0.] Sfric ! (55) [ 0.] Ssurf ! (56) [ 0.] Swcap ! (57) [ 0.] Sveg ! (58) [ 0.] Qp ! (59) [ 0.] BFI ! (60) [ 0.] Genera ! (61) [ 0.] Swind ! (62) [ 0.] Redist ! (63) [ 0.] Snl4 ! (64) [ 0.] Snl3 ! (65) [ 0.] Propag ! (66) [ 0.] Propxy ! (67) [ 0.] Propth ! (68) [ 0.] Propsi ! (69) [ 0.] Radstr ! (70) [ 0.] Nplant ! (71) [ 0.] Lwavp ! (72) [ 0.] Stur ! (73) [ 0.] Turb ! (74) [ 0.] Smud ! (75) [ 0.] Sswell ! (76) [ 0.] Sice ! (77) [ 0.] aice ! (78) [ 0.] hice ! (79) [ 0.] fhswell ! OVHEXP(NMOVAR) upper expected limit of output quantity ! ( 1) [ 1.E10] Xp ! ( 2) [ 1.E10] Yp ! ( 3) [ 1.E10] Dist ! ( 4) [ 100.] Depth ! ( 5) [ 2.] Vel ! ( 6) [ 1.] Ubot ! ( 7) [ 100.] Dissip ! ( 8) [ 100.] Qb ! ( 9) [ 100.] Leak ! (10) [ 10.] Hs ! (11) [ 100.] Tm01 ! (12) [ 100.] Tpeak ! (13) [ 360.] Dir ! (14) [ 360.] PkDir ! (15) [ 360.] TDir ! (16) [ 60.] Dspr ! (17) [ 200.] Wlen ! (18) [ 0.1] Steepn ! (19) [ 10.] Transp ! (20) [ 10.] WForce ! (21) [ 100.] AcDens ! (22) [ 100.] EnDens ! (23) [ 1.E10] Aux ! (24) [ 100.] Xc ! (25) [ 100.] Yc ! (26) [ 50.] Windv ! (27) [ 1.] FrCoef ! (28) [ 100.] RTm01 ! (29) [ 100.] EnDens ! (30) [ 1.] dHs ! (31) [ 2.] dTm ! (32) [ 100.] Tm02 ! (33) [ 1.] FSpr ! (34) [ 1.] Urms ! (35) [ 1.] Ufric ! (36) [ 1.] Zlen ! (37) [ 1.] TauW ! (38) [ 1.] Cdrag ! (39) [ 1.] Setup ! (47) [ 100.] Tm_10 ! (48) [ 100.] RTm_10 ! (49) [ 10.] DifPar ! (50) [ 100.] TmBot ! (51) [ 100.] Watlev ! (52) [ 100.] Botlev ! (53) [ 100.] TPSmoo ! (54) [ 0.1] Sfric ! (55) [ 0.1] Ssurf ! (56) [ 0.1] Swcap ! (57) [ 0.1] Sveg ! (58) [ 1.] Qp ! (59) [ 1000.] BFI ! (60) [ 0.1] Genera ! (61) [ 0.1] Swind ! (62) [ 0.1] Redist ! (63) [ 0.1] Snl4 ! (64) [ 0.1] Snl3 ! (65) [ 0.1] Propag ! (66) [ 0.1] Propxy ! (67) [ 0.1] Propth ! (68) [ 0.1] Propsi ! (69) [ 0.1] Radstr ! (70) [ 100.] Nplant ! (71) [ 200.] Lwavp ! (72) [ 0.1] Stur ! (73) [ 100.] Turb ! (74) [ 0.1] Smud ! (75) [ 0.1] Sswell ! (76) [ 0.1] Sice ! (77) [ 1.0] aice ! (78) [ 10.] hice ! (79) [ 10.] fhswell ! OVULIM(NMOVAR) upper limit of validity ! ( 1) [ 1.E10] Xp ! ( 2) [ 1.E10] Yp ! ( 3) [ 1.E10] Dist ! ( 4) [ 1.E4] Depth ! ( 5) [ 100.] Vel ! ( 6) [ 10.] Ubot ! ( 7) [ 1000.] Dissip ! ( 8) [ 1.] Qb ! ( 9) [ 1000.] Leak ! (10) [ 100.] Hs ! (11) [ 1000.] Tm01 ! (12) [ 1000.] Tpeak ! (13) [ 360.] Dir ! (14) [ 360.] PkDir ! (15) [ 360.] TDir ! (16) [ 360.] Dspr ! (17) [ 1000.] Wlen ! (18) [ 1.] Steepn ! (19) [ 100.] Transp ! (20) [ 1.E5] WForce ! (21) [ 1000.] AcDens ! (22) [ 1000.] EnDens ! (23) [ 1.E10] Aux ! (24) [ 1000.] Xc ! (25) [ 1000.] Yc ! (26) [ 100.] Windv ! (27) [ 1.] FrCoef ! (28) [ 1000.] RTm01 ! (29) [ 1000.] EnDens ! (30) [ 100.] dHs ! (31) [ 100.] dTm ! (32) [ 1000.] Tm02 ! (33) [ 1.] FSpr ! (34) [ 10.] Urms ! (35) [ 10.] Ufric ! (36) [ 1.] Zlen ! (37) [ 10.] TauW ! (38) [ 1.] Cdrag ! (39) [ 1.] Setup ! (47) [ 1000.] Tm_10 ! (48) [ 1000.] RTm_10 ! (49) [ 50.] DifPar ! (50) [ 1000.] TmBot ! (51) [ 1.E4] Watlev ! (52) [ 1.E4] Botlev ! (53) [ 1000.] TPSmoo ! (54) [ 1000.] Sfric ! (55) [ 1000.] Ssurf ! (56) [ 1000.] Swcap ! (57) [ 1000.] Sveg ! (58) [ 1.] Qp ! (59) [ 1000.] BFI ! (60) [ 1000.] Genera ! (61) [ 1000.] Swind ! (62) [ 1000.] Redist ! (63) [ 1000.] Snl4 ! (64) [ 1000.] Snl3 ! (65) [ 1000.] Propag ! (66) [ 1000.] Propxy ! (67) [ 1000.] Propth ! (68) [ 1000.] Propsi ! (69) [ 1000.] Radstr ! (70) [ 1000.] Nplant ! (71) [ 1000.] Lwavp ! (72) [ 1000.] Stur ! (73) [ 10.] Turb ! (74) [ 1000.] Smud ! (75) [ 1000.] Sswell ! (76) [ 1000.] Sice ! (77) [ 1.0] aice ! (78) [ 100.] hice ! (79) [ 100.] fhswell ! SINCQ [ ] sin of ALCQ ! SINPQ [ ] sin of ALPQ ! SPCPOW [ 1] power in expression for computation of average frequency ! =power; set by command SET ... [power] ... (not documented) ! XQLEN [ ] length of x-side of output frame ! XQP [ ] x-coordinate (user coord.) of origin of output frame ! YQLEN [ ] length of y-side of output frame ! YQP [ ] y-coordinate (user coord.) of origin of output frame ! INTEGER ERRPTS INTEGER INRHOG, IUBOTR INTEGER OVSVTY(NMOVAR), SPCPOW REAL AKPOWR, ALCQ, ALPQ, COSCQ REAL COSPQ, DXK, DYK REAL OVEXCV(NMOVAR), OVLEXP(NMOVAR) REAL OVLLIM(NMOVAR), OVHEXP(NMOVAR) REAL OVULIM(NMOVAR), SINCQ, SINPQ REAL XPQ, XQLEN, XQP, YPQ REAL YQLEN, YQP, OUTPAR(MOUTPA) ! ! 8. Subroutines and functions used ! ! --- ! ! 9. Subroutines and functions calling ! ! --- ! ! 10. Error messages ! ! --- ! ! 11. Remarks ! ! --- ! ! 12. Structure ! ! --- ! ! 13. Source text ! END MODULE SWCOMM1 MODULE SWCOMM2 ! ! ! --|-----------------------------------------------------------|-- ! | Delft University of Technology | ! | Faculty of Civil Engineering | ! | Environmental Fluid Mechanics Section | ! | P.O. Box 5048, 2600 GA Delft, The Netherlands | ! | | ! | Programmers: The SWAN team | ! --|-----------------------------------------------------------|-- ! ! ! SWAN (Simulating WAves Nearshore); a third generation wave model ! Copyright (C) 1993-2020 Delft University of Technology ! ! This program is free software; you can redistribute it and/or ! modify it under the terms of the GNU General Public License as ! published by the Free Software Foundation; either version 2 of ! the License, or (at your option) any later version. ! ! This program is distributed in the hope that it will be useful, ! but WITHOUT ANY WARRANTY; without even the implied warranty of ! MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ! GNU General Public License for more details. ! ! A copy of the GNU General Public License is available at ! http://www.gnu.org/copyleft/gpl.html#SEC3 ! or by writing to the Free Software Foundation, Inc., ! 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ! ! ! 0. Authors ! ! 40.41: Marcel Zijlema ! 41.13: Nico Booij ! 41.75: Erick Rogers ! ! 1. Updates ! ! 40.41, Oct. 04: taken from the include file SWCOMM2.INC ! 41.13, Jul. 10: NWAMN unused, replaced by LWDATE (length of WAM date) ! 41.75, Jan. 19: adding sea ice ! ! 2. Purpose ! ! Common variables used by the subroutines in SWAN ! ! 3. Method ! ! MODULE construct ! ! 4. Modules used ! ! --- ! IMPLICIT NONE ! ! 5. Argument variables ! ! --- ! ! 6. Parameter variables ! ! NUMGRD [ 15] maximum number of input grids ! INTEGER NUMGRD PARAMETER (NUMGRD = 15) ! ! 7. Local variables ! ! *** location and dimensions of input grids *** ! ! The following input grids are known in SWAN: ! grid(1): depth ! grid(2): current velocity x-component ! grid(3): current velocity y-component ! grid(4): friction coefficient ! grid(5): wind velocity x-component ! grid(6): wind velocity y-component ! grid(7): water level ! grid(8): y-coordinate ! grid(9): x-coordinate ! grid(10): air-sea temperature difference ! grid(11): number of plants per square meter ! grid(12): turbulent viscosity ! grid(13): fluid mud layer ! grid(14): ice concentration (fraction) ! grid(15): ice thickness (m) ! ! ALPG(NUMGRD) [ 0.] direction of the x-axis w.r.t. user coordinates ! CCURV [ FALSE] correction curvilinear grid ! COSPG(NUMGRD) [ 1.] cos of ALPG ! COSVC [CALCUL] =COS(-ALPG(2)), ! cos of angle of current input grid w.r.t. user coordinates ! COSWC [CALCUL] =COS(-ALPG(5)), ! cos of angle of wind input grid w.r.t. user coordinates ! CVLEFT [ ] the (curv.lin.) comput. grid is left/right-oriented ! DXG(NUMGRD) [ 0.] mesh size of input grid in x-direction ! DYG(NUMGRD) [ 0.] mesh size of input grid in y-direction ! DYNDEP [ FAL] is True if depth varies with time ! EXCFLD(NUMGRD)[-1.E20] exception values for input grids ! ICOND [ 0] initial conditions ! =0 when mode stationary, or no initial conditions needed ! =1 when mode non-stationary and initial conditions should ! be calculated ! IGTYPE(NUMGRD)[ ] =0 when grid has constant values ! =1 when grid is regular ! =2 when grid is curvilinear ! LEDS(NUMGRD) [ 0] =0 when values have not been read ! =1 if values were read ! LWDATE [ 0] length of date-time in WAM file ! LXOFFS [ FAL] offset values were/were not initialized already ! MXG(NUMGRD) [ 0] number of meshes in x-direction ! MYG(NUMGRD) [ 0] number of meshes in y-direction ! OPTG [ 1] type of the computational grid ! =1 when regular ! =2 when irregular, but rectangular (not used) ! =3 when curvilinear ! =5 when unstructured grid ! NBFILS [ 0] number of boundary condition files ! NBSPEC [ 0] number of boundary spectra ! NBGRPT [ 0] number of comp. grid points for which boundary ! condition holds ! RDTIM [ ] =0 when in stationary mode ! =1/DT when in non-stationary mode ! SINPG(NUMGRD) [ 0.] sin of ALPG ! SINVC [CALCUL] =SIN(-ALPG(2)), ! sin of angle of current input grid w.r.t. comp. grid ! SINWC [CALCUL] =SIN(-ALPG(5)), ! sin of angle of wind input grid w.r.t. comp. grid ! STAGX(NUMGRD) [ 0.] staggering of curv.lin. inp. grid w.r.t. comp. grid in X ! STAGY(NUMGRD) [ 0.] staggering of curv.lin. inp. grid w.r.t. comp. grid in Y ! VARAST [ FAL] air-sea temp. diff. is/is not variable over space ! VARFR [ FAL] friction coefficient is/is not variable over space ! VARMUD [ FAL] fluid mud layer is/is not variable over space ! VARNPL [ FAL] number of plants / m2 is/is not variable over space ! VARTUR [ FAL] turbulent viscosity is/is not variable over space ! VARWI [ FAL] wind velocity is/is not variable over space ! VARWLV [ FAL] water level is/is not variable over space ! VARAICE [ FAL] ice concentration (fraction) is/is not variable over space ! VARHICE [ FAL] ice thickness is/is not variable over space ! XPG(NUMGRD) [ 0.] x of origin ! XOFFS [ 0.] offset value in x ! (from user coord. system to internal coord. system) ! YPG(NUMGRD) [ 0.] y of origin ! YOFFS [ 0.] offset value in y ! (from user coord. system to internal coord. system) ! INTEGER ICOND INTEGER IGTYPE(NUMGRD), LEDS(NUMGRD) INTEGER MXG(NUMGRD), MYG(NUMGRD), LWDATE INTEGER OPTG, NBFILS, NBSPEC, NBGRPT REAL*8 RDTIM REAL ALPG(NUMGRD), COSPG(NUMGRD) REAL COSVC, COSWC, DXG(NUMGRD) REAL DYG(NUMGRD), EXCFLD(NUMGRD) REAL SINPG(NUMGRD) REAL SINVC, SINWC, STAGX(NUMGRD) REAL STAGY(NUMGRD), XOFFS REAL XPG(NUMGRD), YOFFS, YPG(NUMGRD) LOGICAL CVLEFT, LXOFFS, VARFR LOGICAL VARWI, VARWLV, DYNDEP LOGICAL VARAST LOGICAL VARNPL, VARTUR, VARMUD LOGICAL CCURV 41.53 LOGICAL VARAICE, VARHICE ! ! *** variables for input files *** ! ! IFLBEG begin time of data on file ! IFLDYN if =0: data is stationary, if =1: nonstationary ! IFLEND end time of data on file ! IFLFAC multiplication factor ! IFLFRM format string ! IFLIDL lay-out in input file ! IFLIFM format identifier ! IFLINT time interval of data on file ! IFLNDF unit ref number of namelist file ! IFLNDS unit ref number of data file ! IFLNHD number of heading lines per input field ! IFLNHF number of heading lines per file ! IFLTIM time of last reading ! INTEGER IFLDYN(NUMGRD) INTEGER IFLIDL(NUMGRD), IFLIFM(NUMGRD), IFLNHF(NUMGRD), & IFLNHD(NUMGRD), IFLNDS(NUMGRD), IFLNDF(NUMGRD) REAL*8 IFLBEG(NUMGRD), IFLINT(NUMGRD), IFLEND(NUMGRD) REAL*8 IFLTIM(NUMGRD) REAL IFLFAC(NUMGRD) CHARACTER*40 IFLFRM(NUMGRD) ! ! 8. Subroutines and functions used ! ! --- ! ! 9. Subroutines and functions calling ! ! --- ! ! 10. Error messages ! ! --- ! ! 11. Remarks ! ! --- ! ! 12. Structure ! ! --- ! ! 13. Source text ! END MODULE SWCOMM2 MODULE SWCOMM3 ! ! ! --|-----------------------------------------------------------|-- ! | Delft University of Technology | ! | Faculty of Civil Engineering | ! | Environmental Fluid Mechanics Section | ! | P.O. Box 5048, 2600 GA Delft, The Netherlands | ! | | ! | Programmers: The SWAN team | ! --|-----------------------------------------------------------|-- ! ! ! SWAN (Simulating WAves Nearshore); a third generation wave model ! Copyright (C) 1993-2020 Delft University of Technology ! ! This program is free software; you can redistribute it and/or ! modify it under the terms of the GNU General Public License as ! published by the Free Software Foundation; either version 2 of ! the License, or (at your option) any later version. ! ! This program is distributed in the hope that it will be useful, ! but WITHOUT ANY WARRANTY; without even the implied warranty of ! MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ! GNU General Public License for more details. ! ! A copy of the GNU General Public License is available at ! http://www.gnu.org/copyleft/gpl.html#SEC3 ! or by writing to the Free Software Foundation, Inc., ! 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ! ! ! 0. Authors ! ! 40.41: Marcel Zijlema ! 41.75: Erick Rogers ! ! 1. Updates ! ! 40.41, Oct. 04: taken from the include file SWCOMM3.INC ! 41.75, Jan. 19: adding sea ice ! ! 2. Purpose ! ! Common variables used by the subroutines in SWAN ! ! 3. Method ! ! MODULE construct ! ! 4. Modules used ! ! --- ! IMPLICIT NONE ! ! 5. Argument variables ! ! --- ! ! 6. Parameter variables ! ! MBOT [ 10] dimension of array PBOT ! MDIFFR [ 10] dimension of array PDIFFR 40.21 ! MDISP [ 8] dimension for dissipation arrays 41.75 40.59 40.35 40.67 ! MGENR [ 1] dimension for generation arrays 40.85 ! MICMAX [ 13] max. number of points in comput. stencil ! MMUD [ 10] dimension of array PMUD ! MNUMS [ 40] dimension of array PNUMS ! MQUAD [ 10] dimension of array PQUAD ! MREDS [ 2] dimension for redistribution arrays 40.85 ! MSETUP [ 2] dimension of array PSETUP ! MSHAPE [ 5] dimension of array PSHAPE ! MSPPAR [ 5] dimension of array SPPARM ! MSURF [ 20] dimension of array PSURF 41.38 41.06 ! MTRNP [ 3] dimension for propagation arrays 40.85 ! MTURBV [ 5] dimension of array PTURBV 40.35 ! MTRIAD [ 10] dimension of array PTRIAD ! MWCAP [ 15] dimension of array PWCAP ! MWIND [ 40] dimension of array PWIND ! MIC4M2 [ 8] dimension of array PIC4M2 ! INTEGER MBOT, MNUMS, MQUAD INTEGER MSETUP, MSHAPE, MSPPAR, MSURF INTEGER MTRIAD, MWCAP, MWIND, MTURBV INTEGER MIC4M2 41.75 INTEGER MICMAX INTEGER MDIFFR 40.21 INTEGER MMUD INTEGER MDISP 40.67 INTEGER MGENR, MREDS, MTRNP 40.85 ! PARAMETER (MBOT = 10) PARAMETER (MDIFFR = 10) 40.21 PARAMETER (MDISP = 8) 41.75 40.59 40.35 40.67 PARAMETER (MGENR = 1) 40.85 PARAMETER (MREDS = 2) 40.85 PARAMETER (MTRNP = 3) 40.85 PARAMETER (MICMAX = 13) PARAMETER (MMUD = 10) PARAMETER (MNUMS = 40) PARAMETER (MQUAD = 10) PARAMETER (MSETUP = 2) PARAMETER (MSHAPE = 5) PARAMETER (MSPPAR = 5) PARAMETER (MSURF = 20) 41.38 41.06 PARAMETER (MTRIAD = 10) PARAMETER (MWCAP = 15) PARAMETER (MWIND = 40) PARAMETER (MTURBV = 5) 40.35 PARAMETER (MIC4M2 = 8) 41.75 ! ! 7. Local variables ! ! *** pointers for data arrays on computational grid *** ! ! JABIN [ 1] within array LSWMAT ! JABLK [ 2] within array LSWMAT ! JAOLD [ 8+2*MDISP] within array SWMATR ! JASTD2 [ 1] new air-sea temp. diff. within array COMPDA ! JASTD3 [ 1] last read air-sea temp. diff. within array COMPDA ! JBOTLV [ 28] bottom level within array COMPDA ! JCDRAG [ 1] drag coefficient within array COMPDA, ! set by command WCAP JANS ... ! JDHS [ 6] wave height correction within array COMPDA ! (difference in Hs between last two iterations) ! JDIS0 [ 7] within array SWMATR ! JDIS1 [ 7+MDISP] within array SWMATR ! JDISS [ 2] total dissipation within array COMPDA ! JDPSAV [ 1] saved depth (for setup) within array COMPDA ! JDP1 [ 7] old depth within array COMPDA ! JDP2 [ 8] new depth within array COMPDA ! JDP3 [ 15] last read depth within array COMPDA ! JDSXB [ 1] bottom friction dissipation within array COMPDA ! set by command TABLE/BLOCK ! JDSXL [ 1] swell dissipation within array COMPDA ! set by command TABLE/BLOCK ! JDSXM [ 1] fluid mud dissipation within array COMPDA ! set by command TABLE/BLOCK ! JDSXS [ 1] surf dissipation within array COMPDA ! set by command TABLE/BLOCK ! JDSXV [ 1] vegetation dissipation within array COMPDA ! set by command TABLE/BLOCK ! JDSXT [ 1] turbulent dissipation within array COMPDA ! set by command TABLE/BLOCK ! JDSXI [ 1] dissipation by sea ice within array COMPDA ! set by command TABLE/BLOCK ! JDSXW [ 1] whitecapping dissipation within array COMPDA ! set by command TABLE/BLOCK ! JDTM [ 20] wave period correction within array COMPDA ! (difference in average wave period between last two iterations) ! JFRC2 [ 1] friction coefficient within array COMPDA ! set by command READ FR ... ! JFRC3 [ 1] friction coefficient within array COMPDA ! set by command READ FR ... ! JGAMMA [ 1] breaker parameter within array COMPDA, ! set by command BREAK NKD ... ! JGEN0 [ ] within array SWMATR ! JGEN1 [ ] within array SWMATR ! JGENR [ 1] total generation within array COMPDA ! set by command TABLE/BLOCK ! JGSXW [ 1] wind input within array COMPDA ! set by command TABLE/BLOCK ! JHS [ 1] significant wave height Hs within array COMPDA ! JHSIBC [ 25] significant wave height from boundary condition in array COMPDA ! JLEAK [ 21] "leak" within array COMPDA ! (refractive energy tranport over sector boundaries) ! JLEK1 [ 7+2*MDISP] within array SWMATR ! JMAT5 [ 5] within array SWMATR ! JMAT6 [ 6] within array SWMATR ! JMATD [ 1] within array SWMATR ! JMATL [ 3] within array SWMATR ! JMATR [ 2] within array SWMATR ! JMATU [ 4] within array SWMATR ! JMUDL1 [ ] old fluid mud layer within array COMPDA ! JMUDL2 [ ] new fluid mud layer within array COMPDA ! JMUDL3 [ ] last read fluid mud layer within array COMPDA ! JAICE2 [ ] new ice fraction within array COMPDA ! JAICE3 [ ] last read ice fraction within array COMPDA ! JHICE2 [ ] new ice thickness within array COMPDA ! JHICE3 [ ] last read ice thickness within array COMPDA ! JNPLA2 [ ] new number of plants / m2 within array COMPDA ! JNPLA3 [ ] last read number of plants / m2 within array COMPDA ! JTURB2 [ ] new turbulent viscosity within array COMPDA 40.35 ! JTURB3 [ ] last read turbulent viscosity within array COMPDA 40.35 ! JP4D [ 7] within array SWTSDA, quadruplet interactions (implicit part) ! JP4S [ 6] within array SWTSDA, quadruplet interactions (explicit part) ! JPBOT [ 1] bottom wave period within array COMPDA ! set by command TABLE/BLOCK ! JPBTFR [ 4] within array SWTSDA, bottom friction ! JPTRI [ 8] within array SWTSDA, triad interactions ! JPVEGT [ 9] within array SWTSDA, vegetation dissipation ! JPTURB [ 10] within array SWTSDA, turbulent dissipation ! JPMUD [ 11] within array SWTSDA, fluid mud dissipation ! JPICE [ 13] within array SWTSDA, dissipation by sea ice ! JPWBRK [ 5] within array SWTSDA, surf breaking ! JPWCAP [ 3] within array SWTSDA, white capping ! JPWNDD [ 2] within array SWTSDA, wind input term (implicit part) ! JPWNDS [ 1] within array SWTSDA, wind input term (explicit part) ! JPSWEL [ 12] within array SWTSDA, swell dissipation ! JQB [ 4] fraction of breaking waves within array COMPDA ! JRADS [ 1] radiation stress within array COMPDA ! set by command TABLE/BLOCK ! JRED0 [ ] within array SWMATR ! JRED1 [ ] within array SWMATR ! JREDS [ 1] total redistribution within array COMPDA ! set by command TABLE/BLOCK ! JRSXQ [ 1] quadruplets within array COMPDA ! set by command TABLE/BLOCK ! JRSXT [ 1] triads within array COMPDA ! set by command TABLE/BLOCK ! JRESPL [ 1] response length within array COMPDA, ! set by command BREAK NKD ... ! JSETUP [ 1] setup values within array COMPDA ! JSTP [ 5] steepness within array COMPDA ! JTAUW [ 1] TauW within array COMPDA, ! set by command WCAP JANS ... ! JTRA0 [ ] within array SWMATR ! JTRA1 [ ] within array SWMATR ! JTRAN [ 1] total propagation within array COMPDA ! set by command TABLE/BLOCK ! JTSXG [ 1] xy-propagation within array COMPDA ! set by command TABLE/BLOCK ! JTSXT [ 1] theta-propagation within array COMPDA ! set by command TABLE/BLOCK ! JTSXS [ 1] sigma-propagation within array COMPDA ! set by command TABLE/BLOCK ! JUBOT [ 3] bottom orbital velocity within array COMPDA ! JURSEL [ 27] Ursell number as used in Triad computation ! JUSTAR [ 1] friction velocity within array COMPDA, ! set by command WCAP JANS ... ! JVX1 [ 9] x of old current velocity within array COMPDA ! JVX2 [ 11] x of new current velocity within array COMPDA ! JVX3 [ 13] x of last read current velocity within array COMPDA ! JVY1 [ 10] y of old current velocity within array COMPDA ! JVY2 [ 12] y of new current velocity within array COMPDA ! JVY3 [ 14] y of last read current velocity within array COMPDA ! JWLV1 [ 22] old water level within array COMPDA ! JWLV2 [ 24] new water level within array COMPDA ! JWLV3 [ 23] last read water level within array COMPDA ! JWX2 [ 16] x of new wind velocity within array COMPDA ! JWX3 [ 18] x of last read wind velocity within array COMPDA ! JWY2 [ 17] y of new wind velocity within array COMPDA ! JWY3 [ 19] y of last read wind velocity within array COMPDA ! JZEL [ 1] roughness within array COMPDA, ! set by command WCAP JANS ... ! MCMVAR [ 28] within array COMPDA, ! =MCMVAR+2, for command READ FR ... (add JFRC2, JFRC3) ! =MCMVAR+4, for command WCAP JANS ... (add JCDRAG, JTAUW, JUSTAR, JZEL) ! =MCMVAR+2, for command BREA NKD ... (add JGAMMA, JRESPL) ! =MCMVAR+1, for command TABLE/BLOCK TMBOT (add JPBOT) ! =MCMVAR+1, for command TABLE/BLOCK DISB (add JDSXB) ! =MCMVAR+1, for command TABLE/BLOCK DISSU (add JDSXS) ! =MCMVAR+1, for command TABLE/BLOCK DISW (add JDSXW) ! =MCMVAR+1, for command TABLE/BLOCK DISM (add JDSXM) ! =MCMVAR+1, for command TABLE/BLOCK DISV (add JDSXV) ! =MCMVAR+1, for command TABLE/BLOCK DISTU (add JDSXT) ! =MCMVAR+1, for command TABLE/BLOCK DISIC (add JDSXI) ! =MCMVAR+1, for command TABLE/BLOCK DISSL (add JDSXL) ! =MCMVAR+1, for command TABLE/BLOCK GENE (add JGENR) ! =MCMVAR+1, for command TABLE/BLOCK GENW (add JGSXW) ! =MCMVAR+1, for command TABLE/BLOCK REDI (add JREDS) ! =MCMVAR+1, for command TABLE/BLOCK REDQ (add JRSXQ) ! =MCMVAR+1, for command TABLE/BLOCK REDT (add JRSXT) ! =MCMVAR+1, for command TABLE/BLOCK PROPA (add JTRAN) ! =MCMVAR+1, for command TABLE/BLOCK PROPX (add JTSXG) ! =MCMVAR+1, for command TABLE/BLOCK PROPT (add JTSXT) ! =MCMVAR+1, for command TABLE/BLOCK PROPS (add JTSXS) ! =MCMVAR+1, for command TABLE/BLOCK RADST (add JRADS) ! MLSWMAT [ 2] within array LSWMAT ! MSWMATR [ 16] within array SWMATR ! MTSVAR [ 11] within array TESTDA ! INTEGER JABIN, JABLK, JAOLD INTEGER JASTD2, JASTD3, JGAMMA, JRESPL INTEGER JCDRAG, JDHS, JDIS0 INTEGER JDIS1, JDISS, JDPSAV, JDP1 INTEGER JDP2 INTEGER JDP3, JDTM, JFRC2, JFRC3 INTEGER JGEN0, JGEN1, JRED0, JRED1 INTEGER JTRA0, JTRA1 INTEGER JDSXB INTEGER JDSXL INTEGER JDSXS INTEGER JDSXW INTEGER JDSXM INTEGER JDSXV, JDSXT INTEGER JGSXW, JGENR INTEGER JRSXQ, JRSXT, JREDS, JRADS INTEGER JTSXG, JTSXT, JTSXS, JTRAN INTEGER JHS, JHSIBC, JLEAK INTEGER JLEK1, JMAT5, JMAT6, JMATD INTEGER JMATL, JMATR, JMATU INTEGER JP4D, JP4S, JPBTFR, JPTRI INTEGER JPWBRK, JPWCAP, JPWNDD, JPWNDS INTEGER JPMUD, JMUDL1, JMUDL2, JMUDL3 INTEGER JPVEGT, JNPLA2, JNPLA3 INTEGER JPTURB, JTURB2, JTURB3 INTEGER JQB, JSETUP, JSTP, JTAUW INTEGER JUBOT, JUSTAR, JVX1, JVX2 INTEGER JVX3, JVY1, JVY2, JVY3 INTEGER JWLV1, JWLV2, JWLV3 INTEGER JWX2, JWX3 INTEGER JWY2, JWY3, JZEL , JPBOT INTEGER MCMVAR, MTSVAR, JURSEL INTEGER JBOTLV, MSWMATR, MLSWMAT INTEGER JPSWEL INTEGER JAICE2, JAICE3, JHICE2, JHICE3 41.75 INTEGER JPICE, JDSXI 41.75 ! ! *** location and dimensions of computational grid *** ! ! ALCP [CALCUL] =-ALPC; ! direction of user coordinates w.r.t. computational coordinates ! ALOCMP [ FALSE] if True, array COMPDA must be re-allocated ! ALPC [ 0.] direction of x-axis of computational grid w.r.t. user coordinates ! COSLAT [ 10] cos of latitude; =1 for Cartesian coordinates ! COSPC [CALCUL] =COS(ALPC) ! DX [CALCUL] =XCLEN/MXS; mesh size in x-direction of computational grid ! DY [CALCUL] =YCLEN/MYS; mesh size in y-direction of computational grid ! DDIR [CALCUL] =(SPDIR2-SPDIR1)/MDC; ! mesh size in theta-direction of computational grid ! DXRP [ ] unused ! DYRP [ ] unused ! FRINTF [CALCUL] =ALOG(SHIG/SLOW)/(MSC-1); frequency integration factor (df/f) ! (integral over frequency of G(f) = SUM_j (sigma_j*Gj*FRINTF) ) ! FRINTH [CALCUL] =SQRT(SFAC); frequency mesh boundary factor ! (mesh in frequency space runs from sigma/FRINTH to sigma*FRINTH) ! FULCIR [ TRUE] spectral directions cover the full/part of circle ! ICOMP [ 1] unused ! ILMAX [CALCUL] maximum number of layers to be used in vegetation model ! IXCGRD [ ] IX of points of computational stencil ! IYCGRD [ ] IY of points of computational stencil ! KCGRD [ ] grid address of points of computational stencil ! RDFSIN [ 100] reduction factor as function of frequency for wind input term ! (will be assigned to LFACTOR in SdsBabanin.f90) ! MCGRD [ 1] number of wet grid points of the computational grid ! MDC [ 0] grid points in theta-direction of computational grid ! MDC4MA [CALCUL] =IDHGH; some counter for quadruplet interactions. Stored in WWINT(18) ! MDC4MI [CALCUL] =IDLOW; some counter for quadruplet interactions. Stored in WWINT(17) ! MMCGR [CALCUL] =MXC*MYC; grid points in computational grid ! MSC [ 0] grid points in sigma-direction of computational grid ! MSC4MA [CALCUL] =ISHGH; some counter for quadruplet interactions. Stored in WWINT(16) ! MSC4MI [CALCUL] =ISLOW; some counter for quadruplet interactions. Stored in WWINT(15) ! MTC [ 1] computational time steps ! MXC [ 0] grid points in x-direction of computational grid ! MYC [ 0] grid points in y-direction of computational grid ! NGRBND [CALCUL] number of grid points on computational grid boundary ! NX [CALCUL] =MXC-1; only used locally. Equal to MXS ! NY [CALCUL] =MYC-1; only used locally. Equal to MYS ! SHIG [CALCUL] =2*PI*FRHIG; highest spectral value of sigma ! SINPC [CALCUL] =SIN(ALPC) ! SLOW [CALCUL] =2*PI*FRLOW; lowest spectral value of sigma ! SPDIR1 [ 0.] represents first spectral direction (if FULCIR=.FALSE.) ! SPDIR2 [ ] represents second spectral direction (if FULCIR=.FALSE.) ! XCGMAX [CALCUL] maximum x-coordinate of computational grid points ! XCGMIN [CALCUL] minimum x-coordinate of computational grid points ! XCLEN [ ] length of computational grid in x-direction ! XCP [CALCUL] =-XPC*COSPC-YPC*SINPC; ! origin of user coordinates w.r.t. computational coordinates ! XPC [ 0.] x coordinate of origin of computational grid ! YCGMAX [CALCUL] maximum y-coordinate of computational grid points ! YCGMIN [CALCUL] minimum y-coordinate of computational grid points ! YCLEN [ ] length of computational grid in y-direction ! YCP [CALCUL] =XPC*SINPC-YPC*COSPC; ! origin of user coordinates w.r.t. computational coordinates ! YPC [ 0.] y coordinate of origin of computational grid ! INTEGER IXCGRD(MICMAX), IYCGRD(MICMAX), KCGRD(MICMAX) INTEGER ICOMP, MCGRD INTEGER MDC, MDC4MA, MDC4MI, MMCGR INTEGER MSC, MSC4MA, MSC4MI, MTC INTEGER MXC, MYC, NX, NY INTEGER NGRBND INTEGER ILMAX REAL COSLAT(MICMAX) REAL RDFSIN(100) REAL ALCP, ALPC, COSPC, DDIR REAL DX, DXRP, DY, DYRP REAL FRINTF, FRINTH, SHIG, SINPC REAL SLOW, SPDIR1, SPDIR2, XCLEN REAL XCP, XPC, YCLEN, YCP REAL YPC REAL XCGMIN, XCGMAX, YCGMIN, YCGMAX LOGICAL FULCIR LOGICAL :: ALOCMP = .FALSE. 40.97 !$OMP THREADPRIVATE(IXCGRD,IYCGRD,KCGRD,COSLAT) !$OMP THREADPRIVATE(RDFSIN) ! ! *** physical parameters *** ! ! CASTD [ 0.] (constant) air-sea temperature difference ! CDCAP [99999.] maximum drag coefficient ! DEGRAD [CALCUL] =PI/180; constant to transform degrees to radians ! DNORTH [ 90.] direction of the North w.r.t. x-axis of user coordinates ! =nor; set by command SET ... [nor] ... ! GRAV [ 9.81] acceleration due to gravity ! =grav; set by command SET ... [grav] ... ! PI [3.1415] circular constant ! PI2 [CALCUL] =2*PI; ! PWTAIL(10) coefficients to calculate tail of the spectrum ! (1) [ 4.] tail power of energy density spectrum as function of freq. ! =5.; for command GEN3 JANS ... ! =5.; for command WCAP JANS ..., ! not documented in manual ! =5.; for command GROWTH G3 JANS ..., ! not documented in manual ! =pwtail; set by command SET ... [pwtail] ! (2) [ 2.5] energy spectrum w.r.t. wave number, not used ! (3) [CALCUL] =PWTAIL(1)+1; action density spectrum w.r.t. frequency ! (4) [ 3.] action density spectrum w.r.t. wave number, not used ! (5) [CALCUL] =1./(PWTAIL(1)*(1.+PWTAIL(1)*(FRINTH-1.))); ! tail factor for the action integral ! (6) [CALCUL] =1./((PWTAIL(1)-1.)*(1.+(PWTAIL(1)-1.)*(FRINTH-1.))); ! tail factor for the energy integral ! (7) [CALCUL] =1./((PWTAIL(1)-2.)*(1.+(PWTAIL(1)-2.)*(FRINTH-1.))); ! tail factor for the first moment of energy ! (8) [CALCUL] =1./((PWTAIL(1)-3.)*(1.+(PWTAIL(1)-3.)*(FRINTH-1.))); ! tail factor for the second moment of energy ! RHO [ 1025.] density of the water ! =rho; set by command SET ... [rho] ... ! USCAP [99999.] maximum ustar ! WLEV [ 0.] water level ! =level; set by command SET [level] ... ! ICEWIND [ 0.] factor controlling wind input through ice cover ! ; set by command SET [ICEWIND] ... ! REAL CASTD, CDCAP, USCAP REAL DEGRAD, DNORTH, GRAV, PI REAL PI2, PWTAIL(10), RHO, WLEV REAL ICEWIND ! ! *** information related to the numerical scheme *** ! ! ACUPDA [ true] indicates whether or not action densities are to be updated ! during computation ! BNAUT [ false] indicates whether nautical or cartesian directions are used ! BNDCHK [ true] indicates whether computed Hs on boundary must be compared ! with value entered as boundary condition ! BRESCL [ true] rescaling on/off ! CSETUP [ true] indicates whether solver for setup has converged ! DEPMIN [ 0.05] threshold depth (to prevent zero divisions) ! =depmin; set by command SET ... [depmin] ... ! DSHAPE [ 2] indicates option for computation of directional distribution ! in the spectrum (boundary spectra etc.) ! =1: directional spread in degrees is given ! =2: power of COS is given ! FPI [ ---] wind sea part of peak frequency ! FSHAPE [ 2] indicates option for computation of frequency distribution ! in the spectrum (boundary spectra etc.) ! =2: Jonswap(default set by subr SWINIT), ! =1: Pierson-Moskowitz, =3: bin, =4: Gaussian (set by command ! BOUNshape ..) ! HSRERR [ 0.1] The error margin allowed between pre-scribed and calculated Hs ! at the up-wave boundary. If exceeded a warning is produced ! IBOT [ 0] indicator bottom friction: ! =0; no bottom friction dissipation ! =1; set by command FRIC JON ..., Jonswap bottom friction model ! =2; for command FRIC COLL ..., Collins bottom friction model ! =3; for command FRIC MAD ..., Madsen bottom friction model ! =5; for command FRIC RIP .... roughness due to ripples and sediment ! ICMAX [ 3] number of points in computational stencil ! ICOR [ ] not used ! ICUR [ 0] indicates presence of currents: ! =0; no currents ! =1; for command READ CUR ..., currents are present ! IDBR [ 1] not used ! IDIF [ 0] not used ! IDIFFR [ 0] diffraction method 40.21 ! 0= no diffraction 40.21 ! 1= diffraction 40.21 ! IDISRF [ 0] indicates wave directionality in surf breaking 41.47 ! 0=no wave directionality 41.47 ! 1=wave directionality included 41.47 ! IDRAG [ 2] indicates formulation for wind drag coefficient 41.49 41.33 ! 1=Wu (1982) 41.33 ! 2=2nd order polynomial fit (see CE publication, 2012) 41.33 ! 3=Cd based on cross swell 41.33 ! 4=Hwang (2011) 40.88 ! 5=Fan (2012) 40.88 ! 6=ECMWF 40.88 ! IFRSRF [ 0] indicates frequency dependent surf breaking 41.06 ! 0=no frequency dependency 41.06 ! 1=frequency dependency 41.06 ! IGEN [ 3] indicates the generation mode ! =1; for command GEN1 ..., ! =2; for command GEN2 ..., ! =3; for command GEN3 ..., ! IICE [ ] indicates how ice is to be handled within the model ! =0; for no representation of sea ice (default) ! =1; activated with keyword "CICE" in "INPUT" file. ! Vestigial code: not in public release. ! =2; activated with keyword "ADCICE" in "INPUT" file. ! Vestigial code: not in public release. ! =3; activated with keyword "IC4M2" in "INPUT" file. ! Active code: dissipation by sea ice using method IC4M2 !CTGA 111003: Full ice implementation. Parameter read in swanpre1.ftn !CTGA! IICE [ ] indicates how ice is to be handled within the model !CTGA! =1; for undefined command !CTGA! =2; for command CICE ADCICE ... ! IINC [ 0] not used ! IMUD [ 0] indicates fluid mud dissipation term: ! =0; no dissipation due to fluid mud ! =1; dissipation due to fluid mud according to Ng (2000) ! IPRE [ ] not used ! IQUAD [ 2] indicates quadruplet interaction term: ! =0; for command OFF QUAD ! =0; for command GEN1 ..., ! =0; for command GEN2 ..., ! =0; for command GROWTH G1 ... (not documented in manual), ! =0; for command GROWTH G2 ... (not documented in manual), ! quadruplets are inactive ! =1; quadruplets are calculated semi implicit per sweep direction ! =2; for command GEN3 ..., ! =2; for command QUAD, not documented in the manual ! =2; set when IWIND=3 or 4 and ICUR=0 in SUBR ERRCHK, ! quadruplets are calculated fully explicit per sweep direction ! =3; set when IWIND=3 or 4 and ICUR=1 in SUBR ERRCHK, ! quadruplets are calculated fully explicit per iteration ! =8; quadruplets are calculated fully explicit per iteration and ! interactions are interpolated in piecewise constant manner ! =iquad; set by command GEN3 ... QUAD [iquad] ..., ! IREFR [ 1] indicates refraction effect: ! =0; for command OFF REF, refraction is inactive ! =1; refraction is active ! ISURF [ 1] indicates surf breaking (shallow water) term: ! =0; for command OFF BRE, surf breaking is inactive ! =1; for command BRE CON ..., surf breaking with constant parameter ! =2; for command BRE VAR ..., surf breaking according to Nelson ! =3; for command BRE RUE ..., surf breaking according to Ruessink ! =4; for command BRE TG ... , surf breaking according to Thornton and Guza ! =5; for command BRE WESTH ..., surf breaking according to biphase scaling ! ITERMX [ ] maximum number of iterations: ! is set equal to MXITST in case of stationary computations ! is set equal to MXITNS in case of nonstationary computations ! ITFRE [ 1] indicator for transport of action in frequency space ! =0; for command OFF FSH, frequency shifting inactive ! =1; frequency shifting active ! ITRIAD [ 0] indicates triad interaction term: ! =0; triads are inactive ! =1; for command TRI DTA IMP ..., not documented in manual ! =2; for command TRI DTA EXP ..., not documented in manual ! =3; for command TRI [trfac] [cutfr], as in manual ! =3; for command TRI LTA IMP ..., not documented in manual ! =4; for command TRI LTA EXP ..., not documented in manual ! IVEG [ 0] indicates vegetation dissipation term: ! =0; no dissipation due to vegetation ! =1; dissipation due to vegetation according to Dalrymple (1984) ! ITURBV [ 0] indicates if turbulent viscosity is activated 40.35 ! =0; not activated 40.35 ! =1; activated 40.35 ! IWCAP [ 1] indicates whitecapping: ! =0; for command GEN1 ..., ! =0; for command GEN2 ..., ! =0; for command OFF WCAP, no whitecapping ! =1; for command GEN3 KOM ..., ! =1; for command WCAP KOM ..., not documented in manual, ! standard WAM formulation (Komen et al.; 1984) ! =2; for command GEN3 JANS ..., ! =2; for command WCAP JANS ..., not documented in manual, ! according to Janssen (1989, 1991) ! =3; for command WCAP LHIG ..., not documented in manual, ! according to Longuet-Higgins (1967), Yuan et al. (1986) ! =4; for command WCAP BJ ..., not documented in manual, ! according to Battjes & Janssen (1978) ! =5; for command WCAP KBJ ..., not documented in manual, ! combined formulation of Komen (1) and Battjes & Janssen (4) ! IWIND [ 0] indicates presence of wind, and type of source term used: ! =0; no wind ! =1; for command GEN1 ..., if wind is made active, ! =1; for command GROWTH G1 ..., not documented in manual, ! 1st generation source term ! =2; for command GEN2 ..., if wind is made active, ! =2; for command GROWTH G2 ..., not documented in manual, ! 2nd generation source term (as in Dolphin) ! =3; for command WIND ..., if IWIND still was 0, else unchanged, ! =3; for command GEN3 KOM ..., if wind is made active, ! =3; for command GROWTH G3 KOM ..., not documented in manual, ! 3rd generation source term (Snyder) ! =4; for command GEN3 JANS ..., if wind is made active, ! =4; for command GROWTH G3 JANS ..., not documented in manual, ! source term by P. Janssen (1989, 1991) ! =5; for command GEN3 YAN ..., if wind is made active, ! =5; for command GROWTH G3 YAN ..., not documented in manual, ! not documented in manual ! LADDS [.fals.] indicates whether extra output is requested or not ! LSETUP [ 0] =0; setup is not calculated ! =1; setup is calculated ! =2; setup is calculated with the boundary conditions from ! a nest file ! LSPNAR [.fals.] indicates whether directional spread is too narrow or not ! MXITST [ 50] max. number of iterations in stationary computations ! MXITNS [ 1] max. number of iterations in nonstationary computations ! NCOR [ 1] not used ! NSTATC [ 1] indicates stationarity of computation: ! =0; stationary computation ! =1; nonstationary computation ! NSTATM [ -1] 0: stationary mode, 1: nonstationary mode, -1: unknown ! NUMOBS [ ] number of obstacles ! NCOMPT [ ] number of COMPUTE commands ! OFFSRC [.fals.] indicates whether source terms are included in ! action balance equation or not ! ONED [.FALS.] Indicates whether the calculation should be performed in 1D-mode ! PDIFFR(MDIFFR) coefficients for diffraction 40.21 ! ( 1) smoothing parameter 40.21 ! ( 2) number of smoothing steps 40.21 ! ( 3) if (Cx,Cy)-velocities are modified or not 40.21 ! PBOT(MBOT) coefficients for the bottom friction models ! ( 1) [ 0.] =cfc; set by command FRIC COL [cfw] [cfc], (Collins equation), ! not documented in the manual ! ( 2) [ 0.015] =cfw; set by command FRIC COL [cfw], (Collins equation), ! also used as CFW in the source code ! ( 3) [ 0.038] =cfjon; set by command FRIC JON [cfjon], (Jonswap formulation) ! ( 4) [ -0.08] =mf; value cannot be changed, (Madsen equation) ! ( 5) [ 0.05] bottom roughness length scale, (Madsen equation), ! =kn; set by command FRIC JON [kn], ! also used as AKN in the source code ! ( 6) [ 2.65] specific gravity of sediment; set by command FRIC RIP [S] ! ( 7) [0.0001] sediment diameter; set by command FRIC RIP [D] ! PMUD(MMUD) coefficients for the fluid mud-induced dissipation model ! ( 1) [ 0.] =layer; set by command MUD ... [layer] ... ! ( 2) [ 1300.] =rhom; set by command MUD ... [rhom] ... ! ( 3) [0.0027] =viscm; set by command MUD ... [viscm] ... ! ( 4) [ RHOW] =rhow; set by command MUD ... [rhow] ... ! ( 5) [1.3E-6] =viscw; set by command MUD ... [viscw] ... ! PIC4M2(MIC4M2) coefficients for the dissipation by sea ice using simple ! polynomial with integer powers. (Sice method=IC4M2) ! ki= C0*f^0 + C1*f^1 ... C5*f^5 + C6*f^6 ! The first coefficient is reserved for ice concentration ! but it used only if the user elects to treat ice concentration ! as constant and uniform. ! ( 1) [ 0.] = ice concentration (as fraction between 0 and 1) ! ( 2) [ 0.] = coefficient C0, for f^0 term ! ( 3) [ 0.] = coefficient C1, for f^1 term ! ( 4) [ 0.] = coefficient C2, for f^2 term ! ( 5) [ 0.] = coefficient C3, for f^3 term ! ( 6) [ 0.] = coefficient C4, for f^4 term ! ( 7) [ 0.] = coefficient C5, for f^5 term ! ( 8) [ 0.] = coefficient C6, for f^6 term ! PNUMS(MNUMS) numerical coefficients ! accuracy criterion: ! ( 1) [ 0.02] relative error in Hs and Tm01 ! =drel; set by command NUM ACCUR [drel] ... ! ( 2) [ 0.03] absolute error in Hs (m) ! =dhabs; set by command NUM ACCUR ... [dhabs] ... ! ( 3) [ 0.3] absolute error in Tm01 (s) ! =dtabs; set by command NUM ACCUR ... [dtabs] ... ! ( 4) [ 98.00] percentage of wet grid points were absolute and relative ! accuracy has been reached ! =npnts; set by command NUM ACCUR ... [npnts] ... ! ( 5) [ 0.] not used ! diffusion schemes: ! ( 6) [ 0.5] numerical diffusion over theta, ! =cdd; set by command NUM DIR [cdd] ! ( 7) [ 0.5] numerical diffusion over sigma, ! =css; set by command NUM SIGIM [css] ... ! ( 8) [ 1.] numerical scheme in frequency space ! =1.; for command NUM SIGIM, implicit scheme ! =2.; for command NUM SIGEX, explicit scheme, ! with CFL criterion ! =3.; for command NUM FIL, explicit scheme, ! without CFL criterion, not documented in the manual ! ( 9) [ 0.01] diffusion coefficient for explicit scheme, ! =diffc; set by command NUM FIL [diffc], ! not documented in the manual ! iterative solver (SIP): ! (12) [ 1.E-4] termination criterion for iterative solver ! =eps2; set by command NUM SIGIM ... [eps2] ... ! (||Ax-b|| < eps2 * ||b||) ! (13) [ 0.] output for SIP solver ! =outp; set by command NUM SIGIM ... [outp] ... ! <0. no output ! =0. only fatal errors are printed ! =1. additional information about the iteration is printed ! =2. maximal output regarding the iteration process ! (14) [ 20.] maximum number of iterations in the solver ! =niter; set by command NUM SIGIM ... [niter] ! (15) [ 0.02] global error in Hs ! (16) [ 0.02] global error in Tm01 ! (17) [ -1.] coefficient for limitation of Ctheta (not used currently) ! (18) [ 0.8] limitation on Froude number (current velocity is reduced if ! larger than CGMAX=PNUMS(18)*SQRT(GRAV*DEPW)), ! =froudmax; set by command SET ... [froudmax] ..., ! not documented in the manual ! (19) [CALCUL] =0.5*SQRT(2.); CFL criterion for explicit scheme in ! frequency space, manual mentions default = 0.7, ! =cfl; set by command NUM SIGEX [cfl] ! (20) [ 0.1] maximum growth in spectral bin, ! =0.1; for command WIND ..., if IWIND=3 or 4 ! =0.1; for command GEN3 ! =0.1; for command TRI ! =0.1; for command QUAD, ! not documented in the manual ! =1.E20; for command OFF QUAD ! =limiter; set by command GEN3 ... QUAD ... [limiter] ! =limiter; set by command NUM ACCUR ... [itermax] [limiter], ! not documented in the manual ! =limiter; set by command QUAD [iquad] [limiter], ! not documented in the manual ! (21) [ 0.] =coefficient for type stopping criterion ! (23) termination criterion for iterative solver in set-up calculation ! =eps2, set by command NUM SETUP ... [eps2] ... ! (24) output for iterative solver in set-up calculation ! =outp, set by command NUM SETUP ... [outp] ... ! <0. no output ! =0. only fatal errors are printed ! =1. additional information about the iteration is printed ! =2. maximal output regarding the iteration process ! (25) maximum number of iterations for solver in set-up calculation ! =niter, set by command NUM SETUP ... [niter] ... ! (28) [ 1.] Qb-value at which the limiter is not active in case lowering AC2 ! (30) [ 0.] =under-relaxation factor ! (33) [ 0.] indicates use of Courant limiter for csigma ! =0. no limiter ! =1. csigma will be limited ! (34) [ 0.5] =upper limit of CFL restriction for csigma ! (35) [ 0.] indicates use of Courant limiter for ctheta ! =0. no limiter ! =1. ctheta will be limited ! (36) [ 0.5] =upper limit of CFL restriction for ctheta ! PQUAD(MQUAD) coefficients for quadruplet interaction ! ( 1) [ 0.25] lambda in eq. B29 of user manual ! ( 2) [ 3.E7] coefficient of interactions ! ( 3) [ 5.5] coefficient for shallow water interactions ! ( 4) [ 0.833] coefficient for shallow water interactions ! ( 5) [ -1.25] coefficient for shallow water interactions ! PSETUP(MSETUP) ! ( 1) [ 0.0] not used ! ( 2) [ 0.0] user defined level for correction of the setup ! PSHAPE(MSHAPE) coefficients for calculation of spectrum from integral ! parameters ! ( 1) [ 3.3] peak enhancement factor of Jonswap spectrum ! =gamma; set by command BOUN SHAPE .. JON [gamma] ! ( 2) [ 0.1] width of Gaussian spectrum (in Hz) ! =sigfr; set by command BOUN SHAPE .. GAU [sigfr] ! after reading the value is converted to radians/second ! by a 2 pi multiplication ! PSURF(MSURF) surf breaking coefficients ! ( 1) [ 1.0] coef. for determining rate of dissipation, (Battjes Janssen), ! =1.5; for command BRE VAR ! =alpha, set by command BRE CON [alpha] ... ! =alpha, set by command BRE VAR [alpha] ... ! ( 2) [ 0.73] breaker parameter ! =gamma, set by command BRE CON ... [gamma] ! ( 4) [ ] the min. value of the breaker parameter of Nelson ! =0.55; set by command BRE VAR ! =gammin; set by command BRE VAR ... [gammin] ... ! ( 5) [ ] the max. value of the breaker parameter of Nelson ! =0.81; set by command BRE VAR ! =gammax; set by command BRE VAR ... [gammax] ... ! ( 6) [ ] breaker parameter for negative bottom slopes ! =0.73; set by command BRE VAR ! =gamneg; set by command BRE VAR ... [gamneg] ... ! ( 7) [ ] proportionality coefficient in expression of Nelson ! =0.88; set by command BRE VAR ! =coeff1; set by command BRE VAR ... [coeff1] ... ! ( 8) [ ] coefficient in the exp in the expression of Nelson ! =0.012; set by command BRE VAR ! =coeff2; set by command BRE VAR ... [coeff2] ! PTRIAD(MTRIAD) ! ( 1) [ 0.65] controls the proportionality coefficient, ! =trfac; set by command TRIAD ... [trfac] ... ! ( 2) [ 2.5] controls the maximum frequency considered in the comp., ! =cutfr; set by command TRIAD ... [cutfr] ! ( 3) [ 10.0] controls above which Ursell number the quadruplets (and ! thus the limiter) are switched off ! =ursell; set by command LIM ... [ursell] ! ( 4) [ 0.2] critical Ursell number appearing in the biphase expression ! =urcrit; set by command TRIAD ... [urcrit] ! ( 5) [ 0.01] controls below which Ursell number the triads are switched off ! =urslim; set by command TRIAD ... [urslim] ! PWCAP(MWCAP) whitecapping coefficients ! ( 1) [2.36E-5] coefficient for Komen et al. (1984), ! ALFAWC (Emperical coefficient) ! =cds2; set by command GEN3 KOM [cds2] ..., ! =cds2; set by command WCAP KOM [cds2] ..., ! not documented in the user manual ! ( 2) [3.02E-3] coefficient for Komen et al. (1984), ! ALFAPM (Alpha of Pierson Moskowitz frequency) ! =stpm; set by command GEN3 KOM ... [stpm], ! =stpm; set by command WCAP KOM ... [stpm], ! not documented in the user manual ! ( 3) [ 4.5] coeff. for Janssen (1989,1991), acc. to Komen et al. (1994), ! CFJANS (cds coefficient) ! =cds1; set by command GEN3 JANS [cds1] ..., ! =cds1; set by command WCAP JANS [cds1] ..., ! not documented in the user manual ! ( 4) [ 0.5] (=DELTA) ! =delta; set by command GEN3 JANS ... [delta], ! =delta; set by command WCAP JANS ... [delta], ! not documented in the user manual ! ( 5) [ 1.] coefficient of Longuet Higgins, ! =cflhig; set by command WCAP LHIG [cflhig], ! not documented in the user manual ! ( 6) [ 0.88] GAMBTJ (Steepness limited wave breaking) ! =bjstp; set by command WCAP BJ [bjstp] ... ! =bjstp; set by command WCAP KBJ [bjstp] ... ! ( 7) [ 1.] Alpha in Battjes/Janssen, ! =bjalf; set by command WCAP BJ ... [bjalf] ! =bjalf; set by command WCAP KBJ ... [bjalf] ... ! ( 8) [ 0.75] numerical diffusion over sigma ! =kconv; set by command WCAP KBJ ... [kconv] ! PWIND(MWIND) wind growth term coefficients ! ( 1) [ 188.] controls linear wave growth, ! =cf10; set by command GEN1 [cf10] ... ! =cf10; set by command GEN2 [cf10] ... ! =cf10; set by command GROWTH G1 [cf10] ..., ! not documented in the user manual ! =cf10; set by command GROWTH G2 [cf10] ..., ! not documented in the user manual ! ( 2) [ 0.59] controls the exponential wave growth, ! =cf20; set by command GEN1 ... [cf20] ... ! =cf20; set by command GEN2 ... [cf20] ... ! =cf20; set by command GROWTH G1 ... [cf20] ..., ! not documented in the user manual ! =cf20; set by command GROWTH G2 ... [cf20] ..., ! not documented in the user manual ! ( 3) [ 0.12] controls the exponential wave growth, ! =cf30; set by command GEN1 ... [cf30] ... ! =cf30; set by command GEN2 ... [cf30] ... ! =cf30; set by command GROWTH G1 ... [cf30] ..., ! not documented in the user manual ! =cf30; set by command GROWTH G2 ... [cf30] ..., ! not documented in the user manual ! ( 4) [ 250.] controls the dissipation rate, ! =cf40; set by command GEN1 ... [cf40] ... ! =cf40; set by command GEN2 ... [cf40] ... ! =cf40; set by command GROWTH G1 ... [cf40] ..., ! not documented in the user manual ! =cf40; set by command GROWTH G2 ... [cf40] ..., ! not documented in the user manual ! ( 5) [0.0023] controls the spectral energy of the limit spectrum ! =cf50; set by command GEN2 ... [cf50] ... ! =cf50; set by command GROWTH G2 ... [cf50] ..., ! not documented in the user manual ! ( 6) [-0.223] controls the spectral energy of the limit spectrum ! =cf60; set by command GEN2 ... [cf60] ... ! =cf60; set by command GROWTH G2 ... [cf60] ..., ! not documented in the user manual ! ( 7) [ 0.] cf70, not used ! ( 8) [ -0.56] cf80, not used ! ( 9) [CALCUL] density air / density water (=RHOAW), ! =PWIND(16)/RHO ! =rhoaw; set by command GROWTH G1 ... [rhoaw] ..., ! not documented in the user manual ! =rhoaw; set by command GROWTH G2 ... [rhoaw] ..., ! not documented in the user manual ! (10) [0.0036] limit energy Pierson Moskowitz spectrum ! =edmlpm; set by command GEN1 ... [edmlpm] ... ! =edmlpm; set by command GEN2 ... [edmlpm] ... ! =edmlpm; set by command GROWTH G1 ... [edmlpm] ..., ! not documented in the user manual ! =edmlpm; set by command GROWTH G2 ... [edmlpm] ..., ! not documented in the user manual ! (11) [0.00123] drag coefficient ! =cdrag; set by command GEN1 ... [cdrag] ... ! =cdrag; set by command GEN2 ... [cdrag] ... ! =cdrag; set by command GROWTH G1 ... [cdrag] ..., ! not documented in the user manual ! =cdrag; set by command GROWTH G2 ... [cdrag] ..., ! not documented in the user manual ! (12) [ 1.0] minimum wind velocity, relative to current at 10 m above msl ! =umin; set by command GEN1 ... [umin] ... ! =umin; set by command GEN2 ... [umin] ... ! =umin; set by command GROWTH G1 ... [umin] ..., ! not documented in the user manual ! =umin; set by command GROWTH G2 ... [umin] ..., ! not documented in the user manual ! (13) [ 0.13] coefficient that determines the Pierson Moskowitz spectrum ! =cfpm; set by command GEN1 ... [cfpm] ! =cfpm; set by command GEN2 ... [cfpm] ! =cfpm; set by command GROWTH G1 ... [cfpm], ! not documented in the user manual ! =cfpm; set by command GROWTH G2 ... [cfpm], ! not documented in the user manual ! (14) [ 0.01] (=ALPHA) Alpha, according to Janssen (1991) wave growth model ! (15) [ 0.41] (=XKAPPA)carnock: Kappa ! (16) [ 1.28] density of the air (=RHOA) ! (17) [CALCUL] =RHO, density of the water (=RHOW) ! (31) [ 0.] proportionality coefficient in the wave growth term of ! Caveleri and Malanotte, ! =0.0015; for command GEN3 ... AGROW ! =a; set by command GEN3 ... AGROW [a] ! SIGMAG [ 0.1] width of the Gaussian frequency spectrum in Hz ! =0.01; for command BOU STAT ... GAU ! =sigfr; set by command BOU STAT ... GAU [sigfr] ! after reading the value is converted to radians/second ! by a 2 pi multiplication ! SPPARM integral parameters used for computation of incident spectrum ! ( 1) [ ---] significant wave height ! ( 2) [ ---] wave period (peak or mean) ! ( 3) [ ---] average wave direction ! ( 4) [ ---] directional distribution coefficient ! SY0 [ 3.3] peak enhancement parameter of the JONSWAP spectrum, ! =gamma; set by command BOU STAT ... JON [gamma] ! U10 [ 0.] wind velocity ! =vel; set by command WIND [vel] ... !CTGA 111003: Full ice implementation. Parameter read in swanpre1.ftn ! WBICETH[ 70.0] Minimum ice concentration (percentage out of 100.0) ! necessary to trigger wave blocking. ! WDIC [CALCUL] =PI2*((WDIP/PI2-NINT(WDIP/PI2)), ! WDIP [ 0.] wind direction with respect to problem coordinates ! =dir; set by command WIND ... [dir] ! INTEGER DSHAPE, FSHAPE INTEGER ICMAX INTEGER IBOT, ICOR, ICUR INTEGER IDBR, IDIF, IGEN, IINC INTEGER IPRE, IQUAD, IREFR, ISURF INTEGER ITERMX, ITFRE, ITRIAD INTEGER IWCAP, IWIND, LSETUP, IDRAG INTEGER MXITST, MXITNS, NCOR INTEGER NSTATC, NSTATM, NUMOBS, NCOMPT 40.41 INTEGER IDIFFR 40.21 INTEGER IMUD 40.59 INTEGER IVEG 40.55 INTEGER ITURBV 40.35 INTEGER IFRSRF 41.06 INTEGER IDISRF 41.47 !CTGA 111003: Full ice implementation. Parameter read in swanpre1.ftn INTEGER IICE 41.75/CTGA REAL DEPMIN, PBOT(MBOT), PNUMS(MNUMS) REAL PSETUP(MSETUP), PSHAPE(MSHAPE) REAL PSURF(MSURF), PTRIAD(MTRIAD) REAL PWCAP(MWCAP), PWIND(MWIND) REAL SIGMAG REAL SPPARM(MSPPAR),SY0, U10 REAL WDIC, WDIP, HSRERR REAL PQUAD(MQUAD) REAL*8 RCOMPT(300,5) REAL PDIFFR(MDIFFR) 40.21 REAL PMUD(MMUD) 40.59 REAL PTURBV(MTURBV) 40.35 REAL PIC4M2(MIC4M2) 41.75 !CTGA 111003: Full ice implementation. Parameter read in swanpre1.ftn REAL WBICETH LOGICAL ACUPDA LOGICAL BNDCHK, BNAUT, ONED, BRESCL LOGICAL OFFSRC 40.80 LOGICAL LADDS 40.85 LOGICAL CSETUP LOGICAL LSPNAR ! parameters for Babanin physics and swell, see Rogers et al (JTECH, 2012) REAL A1SDS, A2SDS, P1SDS, P2SDS, CDSV, FESWELL 40.88 REAL RDCOEF, B1Z, WNDSCL, CDFAC 40.88 LOGICAL UPWARDS, VECTOR_TAU, TRUE_U10 40.88 LOGICAL ROGERS, ZIEGER, ARDHUIN 40.88 REAL FPI 40.88 !$OMP THREADPRIVATE(ICMAX,CSETUP) ! ! 8. Subroutines and functions used ! ! --- ! ! 9. Subroutines and functions calling ! ! --- ! ! 10. Error messages ! ! --- ! ! 11. Remarks ! ! --- ! ! 12. Structure ! ! --- ! ! 13. Source text ! END MODULE SWCOMM3 MODULE SWCOMM4 ! ! ! --|-----------------------------------------------------------|-- ! | Delft University of Technology | ! | Faculty of Civil Engineering | ! | Environmental Fluid Mechanics Section | ! | P.O. Box 5048, 2600 GA Delft, The Netherlands | ! | | ! | Programmers: The SWAN team | ! --|-----------------------------------------------------------|-- ! ! ! SWAN (Simulating WAves Nearshore); a third generation wave model ! Copyright (C) 1993-2020 Delft University of Technology ! ! This program is free software; you can redistribute it and/or ! modify it under the terms of the GNU General Public License as ! published by the Free Software Foundation; either version 2 of ! the License, or (at your option) any later version. ! ! This program is distributed in the hope that it will be useful, ! but WITHOUT ANY WARRANTY; without even the implied warranty of ! MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ! GNU General Public License for more details. ! ! A copy of the GNU General Public License is available at ! http://www.gnu.org/copyleft/gpl.html#SEC3 ! or by writing to the Free Software Foundation, Inc., ! 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ! ! ! 0. Authors ! ! 40.41: Marcel Zijlema ! ! 1. Updates ! ! 40.41, Oct. 04: taken from the include file SWCOMM4.INC ! ! 2. Purpose ! ! Common variables used by the subroutines in SWAN ! ! 3. Method ! ! MODULE construct ! ! 4. Modules used ! ! --- ! IMPLICIT NONE ! ! 5. Argument variables ! ! --- ! ! 6. Parameter variables ! ! --- ! ! 7. Local variables ! ! *** information for test output *** ! ! ICOTES [ 0] minimum value for ITEST, ! =30; for command COTES, not documented in the manual ! =cotes; for command COTES [cotes], not documented ! INTES [ 0] testing parameter, ! =30; for command INTE, not documented in the manual ! =intes; for command INTE [intes], not documented ! IOUTES [ 0] minimum value for ITEST, ! =30; for command OUTE, not documented in the manual ! =itest; for command OUTE [itest], not documented ! IPTST [ ] sequence number of a test point ! IFPAR [ 0] unit ref. number for output of parameters in test points ! IFS1D [ 0] unit ref. number for output of 1D spectra of source terms ! if used, value is made non-zero by subr FOR ! IFS2D [ 0] unit ref. number for output of 2D spectra of source terms ! if used, value is made non-zero by subr FOR ! LXDMP [ -1] grid counter for a test point in the x-direction, ! =ix; set by command TEST ... POI <[ix] [iy]> ! LYDMP [ 0] grid counter for a test point in the y-direction, ! =iy; set by command TEST ... POI <[ix] [iy]> ! MAXMES [ 200] not used ! =maxmes; set by command SET [maxmes] ! NEGMES [ 0] not used ! NPTST [ 0] number of test points; set by command TEST ! NPTSTA [ 1] number of test points, equal to MAX(1,NPTST) ! TESTFL [ FAL] test output must/must not be made, mainly for testpoints ! UNDFLW [1.E-15] small number to prevent underflows ! INTEGER ICOTES, INTES, IOUTES INTEGER IPTST INTEGER IFPAR, IFS1D, IFS2D INTEGER LXDMP, LYDMP, MAXMES, NEGMES INTEGER NPTST, NPTSTA REAL UNDFLW LOGICAL TESTFL !$OMP THREADPRIVATE(IPTST,TESTFL) ! ! *** higher order propagation and spherical coordinates *** ! ! KREPTX [ 0] if >0, the domain repeats itself in x-direction (primarily intended for ! propagation around the globe) ! KSPHER [ 0] indicates whether spherical coordinates are used, and which projection method ! 0=Cartesian coordinates, >0=spherical coordinates ! LENDEG [ 1E5] length of a degree of the sphere ! PROJ_METHOD[ 0] projection method; 0=(quasi-)Cartesian, ! 1=uniform Mercator (only spherical coordinates) ! PROPFL [CALCUL] indicates whether flux-limiting in spectral space is used ! PROPSC [CALCUL] indicates which numerical scheme is to be used for spatial propagation. ! 1=first order (BSBT), 2=SORDUP, 3=3rd order (S&L) ! PROPSS [ 2] indicates which numerical scheme is to be used in stationary computations ! 1=first order (BSBT), 2=SORDUP ! PROPSN [ 3] indicates which numerical scheme is to be used in nonstationary computations ! 1=first order (BSBT), 3=3rd order (S&L) ! PROPSL [CALCUL] indicates which numerical scheme is used locally ! REARTH [ 6E6] radius of the earth ! WAVAGE [ 0.] indicates "wave age" parameter (used in counteracting garden-sprinkler effect ! in subroutine SANDL) ! INTEGER PROPSC, KSPHER, KREPTX INTEGER PROPSL INTEGER PROPSS, PROPSN, PROJ_METHOD INTEGER PROPFL REAL WAVAGE, REARTH, LENDEG !$OMP THREADPRIVATE(PROPSL) ! ! 8. Subroutines and functions used ! ! --- ! ! 9. Subroutines and functions calling ! ! --- ! ! 10. Error messages ! ! --- ! ! 11. Remarks ! ! --- ! ! 12. Structure ! ! --- ! ! 13. Source text ! END MODULE SWCOMM4 MODULE TIMECOMM ! ! ! --|-----------------------------------------------------------|-- ! | Delft University of Technology | ! | Faculty of Civil Engineering | ! | Environmental Fluid Mechanics Section | ! | P.O. Box 5048, 2600 GA Delft, The Netherlands | ! | | ! | Programmers: The SWAN team | ! --|-----------------------------------------------------------|-- ! ! ! SWAN (Simulating WAves Nearshore); a third generation wave model ! Copyright (C) 1993-2020 Delft University of Technology ! ! This program is free software; you can redistribute it and/or ! modify it under the terms of the GNU General Public License as ! published by the Free Software Foundation; either version 2 of ! the License, or (at your option) any later version. ! ! This program is distributed in the hope that it will be useful, ! but WITHOUT ANY WARRANTY; without even the implied warranty of ! MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ! GNU General Public License for more details. ! ! A copy of the GNU General Public License is available at ! http://www.gnu.org/copyleft/gpl.html#SEC3 ! or by writing to the Free Software Foundation, Inc., ! 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ! ! ! 0. Authors ! ! 40.41: Marcel Zijlema ! ! 1. Updates ! ! 40.41, Oct. 04: taken from the include file TIMECOMM.INC ! ! 2. Purpose ! ! Common variables used by the subroutines in SWAN ! ! 3. Method ! ! MODULE construct ! ! 4. Modules used ! ! --- ! IMPLICIT NONE ! ! 5. Argument variables ! ! --- ! ! 6. Parameter variables !TIMG! !TIMG! MXTIMR [ 10] maximum number of simultaneous timings, dimension of !TIMG! work-arrays LISTTM, TIMERS !TIMG! NSECTM [ 300] number of sections that may be defined for an application !TIMG! !TIMG INTEGER NSECTM, MXTIMR !TIMG PARAMETER (NSECTM=300, MXTIMR=10) ! ! 7. Local variables ! ! *** Time related variables for the computation *** ! ! TINIC [ ] Start time and date of the computation (in seconds since ! the reference day (REFDAY)) ! =tbegc; set by command COMP [tbegc] ... ! DT [ ] Time step of the computation (in seconds) ! =deltc; set by command COMP ... [deltc] ... ! =deltc*60; set by command COMP ... [deltc] MI ... ! =deltc*60*60; set by command COMP ... [deltc] HR ... ! =deltc*60*60*24; set by command COMP ... [deltc] DA ... ! TFINC [ ] End time and date of the computation (in seconds since ! the reference day (REFDAY)) ! TIMCO [ ] Time and date of the computation during the simulation (in ! seconds since the reference day (REFDAY)) ! REAL*8 TINIC, DT, TFINC, TIMCO !COH! !COH! COH_TINIC [ 6] Start date and time in vector format (year,month,day,hour,min,sec) !COH! COH_TFINC [ 6] End date and time in vector format (year,month,day,hour,min,sec) !COH INTEGER COH_TINIC(6), COH_TFINC(6) ! ! *** Time related variables for nested runs *** ! ! BEGBOU [ ] Start time for the non-stationary boundary conditions ! (in seconds since the reference day (REFDAY)) in the case ! of nested runs. Read from the nest file ! IFACMX [ 1] set by command BOU (STAT) NE ... [ifacmx] ... ! (NOT documented) ! IFACMY [ 1] set by command BOU (STAT) NE ... [ifacmy] ! (NOT documented) ! TIMERB [ ] Last time that non-stationary boundary conditions has been read ! (in seconds since the reference day (REFDAY))) in the case ! of nested runs. Read from the nest file ! TINTBO [ ] Time step between non-stationary boundary conditions (in seconds) ! in the case of nested runs. Read from the nest file ! INTEGER IFACMX, IFACMY REAL BEGBOU, TIMERB, TINTBO !TIMG! !TIMG! *** contains the cpu and wall-clock times *** !TIMG! !TIMG! DCUMTM [ 600] cumulative time; columns 1,2: cpu-time, wall-clock time !TIMG! LASTTM [ 1] last occupied position in LISTTM, 0 if all positions in !TIMG! LISTTM are free !TIMG! LISTTM [ 10] list of section numbers for all running/active timers !TIMG! in array TIMERS. A value of -1 signals that the !TIMG! corresponding timer is not running !TIMG! NCUMTM [ 300] for each section of the application the number of timings !TIMG! that contributed to time in DCPUTM !TIMG! TIMERS [ 600] start-time of active timers; columns 1,2: cpu-time, !TIMG! wall-clock time !TIMG! !TIMG INTEGER, SAVE :: NCUMTM(NSECTM), LISTTM(MXTIMR), LASTTM !TIMG DOUBLE PRECISION, SAVE :: DCUMTM(NSECTM,2), TIMERS(MXTIMR,2) !TIMG!$OMP THREADPRIVATE(DCUMTM,TIMERS,NCUMTM,LISTTM,LASTTM) ! ! 8. Subroutines and functions used ! ! --- ! ! 9. Subroutines and functions calling ! ! --- ! ! 10. Error messages ! ! --- ! ! 11. Remarks ! ! --- ! ! 12. Structure ! ! --- ! ! 13. Source text ! END MODULE TIMECOMM