* Deltares, D-Flow FM Version 1.2.0.61833M, Sep 24 2018, 12:46:22 * Source: https://svn.oss.deltares.nl/repos/delft3d/branches/research/Deltares/20180911_DFM-WAQ/ * File creation date: 16:50:34, 24-09-2018 ** DEBUG : 0 0.1000020 NOD(KMAX) ** DEBUG : 6 0.7000140 XK (KMAX), YK (KMAX), ZK (KMAX), KC (KMAX), NMK (KMAX), RNOD(KMAX) ** DEBUG : 6 9.9999998E-03 XS(NSMAX) ** DEBUG : 6 9.9999998E-03 YS(NSMAX) ** DEBUG : 6 9.9999998E-03 ZS(NSMAX) ** DEBUG : 6 9.9999998E-03 IPSAM ** DEBUG : 7 5.0000001E-02 xlan(maxlan) ** DEBUG : 7 5.0000001E-02 ylan(maxlan) ** DEBUG : 7 5.0000001E-02 zlan(maxlan) ** DEBUG : 8 2.5000000E-02 nclan(maxlan) Until here copy of previous diagnostic file ** WARNING: TimeSplitInterval invalid, disabling time partitioning of output. Got: 0X ** WARNING: readMDUFile: [numerics] jaorgsethu=1 was in file, but not used. Check possible typo. ** WARNING: readMDUFile: [physics] effectspiral=0. was in file, but not used. Check possible typo. ** WARNING: readMDUFile: [wind] gapres=101325.0000000 was in file, but not used. Check possible typo. ** DEBUG : unc_read_net_ugrid: net file 'f34_net.nc' is not UGRID. No problem, will fall back to old format reader. ** DEBUG : Opened 'f34_net.nc' as # 3. ** DEBUG : Closed NetCDF file 'f34_net.nc. ** INFO : Opened file : f34_obs.xyn ** INFO : Closed file : f34_obs.xyn ** INFO : Opened file : f34_thd.pli ** INFO : Closed file : f34_thd.pli ** INFO : Opened file : f34_crs.pli ** INFO : Closed file : f34_crs.pli ** INFO : Initializing flow model geometry... ** DEBUG : Opened 'f34_net.nc' as # 3. ** WARNING: Domain numbers read from file, but overwriting cell numbering by enforcing findcells. 0 ** INFO : Finding crossed flowlinks... ** INFO : done ** INFO : thin dams with kdtree2, elapsed time: 0.0000 s. ** INFO : Opened file : f34.ext ** DEBUG : 8 8.1430003E-03 kce(nx), ke(nx), kez(nx), keu(nx), kes(nx), ketm(nx), kesd(nx), keuxy(nx), ket(nx), ken(nx), ke1d2d(nx), keg(nx), ked(nx), kep(nx), keklep(nx), kegs(nx), kegen(nx), itpez(nx), itpenz(nx), itpeu(nx) , itpenu(nx) , kew(nx), ftpet(nx) ** INFO : Opened file : f34_001.pli ** INFO : Closed file : f34_001.pli ** INFO : boundary: 'f34_001.pli' opened 13 cells. ** INFO : waterlevelbnd f34_001.pli 13 nr of open bndcells ** DEBUG : 8 1.8800000E-03 nd(ndx), bl(ndx), bai(ndx), kcs(ndx) ** DEBUG : 8 1.2450001E-03 xu(lnx), yu(lnx) , blu(lnx) ** DEBUG : addexternalboundarypoints: added 0 bnd points for SOBEK1D-FM2D connections. ** INFO : setbedlevelfromextfile: Using bedlevel as specified in net-file. ** INFO : Done initializing flow model geometry. ** DEBUG : 8 2.3500000E-03 rho (ndkx) ** DEBUG : 8 2.3500000E-03 ww1 (ndkx) ** DEBUG : 8 2.3500000E-03 qw (ndkx) ** DEBUG : 8 2.3500000E-03 zws (ndkx) ** DEBUG : 8 2.3500000E-03 zws0(ndkx) ** DEBUG : 8 4.6999999E-03 ucx (ndkx) , ucy (ndkx) ** DEBUG : 8 2.3500000E-03 ucz (ndkx) ** DEBUG : 8 2.3500000E-03 workx (ndkx) ** DEBUG : 8 2.3500000E-03 worky (ndkx) ** DEBUG : 8 3.7350000E-03 work0 (0:max(kmx,1),max(ndx,lnx)) ** DEBUG : 8 3.3199999E-03 work1 (max(kmx,1),max(ndx,lnx)) ** DEBUG : 8 4.6999999E-03 uqcx(ndkx) , uqcy(ndkx) ** DEBUG : 8 4.6999999E-03 ucxq(ndkx) , ucyq(ndkx) ** DEBUG : 8 4.6999999E-03 qin (ndkx) , vih (ndkx) ** DEBUG : 8 4.6999999E-03 dvxc(ndkx) , dvyc(ndkx) ** DEBUG : 8 2.3500000E-03 cfli(ndkx) ** DEBUG : 8 2.3500000E-03 squ (ndkx) ** DEBUG : 8 2.3500000E-03 sqi (ndkx) ** DEBUG : 9 2.3500000E-03 vol0(ndkx) ** DEBUG : 9 2.3500000E-03 vol1(ndkx) ** DEBUG : 9 4.1499999E-03 turkin0 (Lnkx) ** DEBUG : 9 4.1499999E-03 turkin1 (Lnkx) ** DEBUG : 9 4.1499999E-03 tureps0 (Lnkx) ** DEBUG : 9 4.1499999E-03 tureps1 (Lnkx) ** DEBUG : 9 4.1499999E-03 vicwwu (Lnkx) ** DEBUG : 9 2.3500000E-03 vicwws (ndkx) ** DEBUG : 9 2.3500000E-03 turkinepsws (2,ndkx) ** DEBUG : 9 2.3500000E-03 sqcu(Ndkx) ** DEBUG : 9 2.3500000E-03 tqcu(Ndkx) ** DEBUG : 9 2.3500000E-03 eqcu(Ndkx) ** DEBUG : 9 4.1499999E-03 u0 (lnkx) ** DEBUG : 9 4.1499999E-03 u1 (lnkx) ** DEBUG : 9 4.1499999E-03 u_to_umain (lnkx) ** DEBUG : 9 4.1499999E-03 q1 (lnkx) ** DEBUG : 9 4.1499999E-03 qa (lnkx) ** DEBUG : 9 4.1499999E-03 v (lnkx) ** DEBUG : 9 4.1499999E-03 ucxu (lnkx) ** DEBUG : 9 4.1499999E-03 ucyu (lnkx) ** DEBUG : 9 4.1499999E-03 hu (lnkx) ** DEBUG : 9 4.1499999E-03 huvli(lnkx) ** DEBUG : 9 4.1499999E-03 au (lnkx) ** DEBUG : 9 4.1499999E-03 viu (lnkx) ** DEBUG : 9 4.1499999E-03 vicLu (lnkx) ** DEBUG : 9 4.1499999E-03 cflj (lnkx) ** DEBUG : 9 4.1499999E-03 tetaj(lnkx) ** DEBUG : 9 4.1499999E-03 suu (lnkx) ** DEBUG : 9 4.1499999E-03 advi (lnkx) ** DEBUG : 9 4.1499999E-03 adve (lnkx) ** DEBUG : 9 4.1499999E-03 plotlin(max(lnkx,ndkx)) ** DEBUG : 9 2.3500000E-03 sa1 (ndkx) ** INFO : Finding crossed flowlinks... ** INFO : done ** INFO : Finding flow nodes... ** INFO : done in 0.00000 sec. ** INFO : Start initializing external forcings... ** INFO : External Forcing or Initialising 'waterlevelbnd' from file 'f34_001.pli'. ** INFO : External Forcing or Initialising 'windxy' from file 'f34.wnd'. ** DEBUG : 10 1.2450001E-03 wx(lnx), wy(lnx) ** INFO : Closed file : f34.ext ** INFO : Done initializing external forcings. ** DEBUG : 10 1.1750000E-03 d0(nodtot), zkr(nodtot),pk(0:nodtot), apk(nodtot), rk(nodtot) ** INFO : nogauss , nocg : 162 73 ** DEBUG : 10 4.0310002E-03 iao(nn+1) ** DEBUG : 10 1.6950000E-03 ao(na) ** DEBUG : 10 4.3799998E-03 wk(nwk) ** INFO : Finding crossed flowlinks... ** INFO : done ** INFO : Finding flow nodes... ** INFO : done in 0.00000 sec. ** INFO : Modelinit finished at: 16:50:34, 24-09-2018 ** INFO : ** Model initialization was successful ** ** INFO : * Active Model definition: # Generated on 16:50:34, 24-09-2018 # Deltares, D-Flow FM Version 1.2.0.61833M, Sep 24 2018, 12:46:22 # Source:https://svn.oss.deltares.nl/repos/delft3d/branches/research/Deltares/20180911_DFM-WAQ/ [model] Program = D-Flow FM Version = 1.2.0.61833M MDUFormatVersion = 1.06 # File format version (do not edit this) AutoStart = 2 # Autostart simulation after loading MDU (0: no, 1: autostart, 2: autostartstop) ModelSpecific = # Optional 'model specific ID', to enable certain custom runtime function calls (instead of via MDU name). [geometry] NetFile = f34_net.nc # Unstructured grid file *_net.nc GridEnclosureFile = # Enclosure file to clip outer parts from the grid *.pol BedlevelFile = # Bedlevels points file e.g. *.xyz, only needed for bedlevtype not equal 3 DryPointsFile = # Dry points file *.xyz (third column dummy z values), or dry areas polygon file *.pol (third column 1/-1: inside/outside) WaterLevIniFile = # Initial water levels sample file *.xyz LandBoundaryFile = # Land boundaries file *.ldb, used for visualization ThinDamFile = f34_thd.pli # Polyline file *_thd.pli, containing thin dams FixedWeirFile = # Polyline file *_fxw.pliz, containing fixed weirs with rows x, y, crest level, left ground level, right ground level Gulliesfile = # Polyline file *_gul.pliz, containing lowest bed level along talweg x, y, z level Roofsfile = # Polyline file *_rof.pliz, containing roofgutter heights x, y, z level VertplizFile = # Vertical layering file *_vlay.pliz with rows x, y, Z, first Z, nr of layers, second Z, layer type ProflocFile = # Channel profile location file *_proflocation.xyz with rows x, y, z, profile number ref ProfdefFile = # Channel profile definition file *_profdefinition.def with definition for all profile numbers ProfdefxyzFile = # Channel profile definition file _profdefinition.def with definition for all profile numbers Uniformwidth1D = 2. # Uniform width for channel profiles not specified by profloc Uniformheight1D = 3. # Uniform height for channel profiles not specified by profloc StructureFile = # File *.ini containing list of structures (pumps, weirs, gates and general structures) ManholeFile = # File *.ini containing manholes PipeFile = # File *.pliz containing pipe-based 'culverts' ShipdefFile = # File *.shd containing ship definitions WaterLevIni = 1.9 # Initial water level at missing s0 values BedlevUni = -5. # Uniform bed level used at missing z values if BedlevType > 2 BedlevType = 3 # Bathymetry specification # 1: at cell centers (from BathymetryFile) # 2: at faces (from BathymetryFile) # 3: at nodes, face levels mean of node values # 4: at nodes, face levels min. of node values # 5: at nodes, face levels max. of node values # 6: at nodes, face levels max. of cell-center values Blmeanbelow = -999. # If not -999d0, below this level the cell center bed level is the mean of surrouding net nodes Blminabove = -999. # If not -999d0, above this level the cell center bed level is the min. of surrouding net nodes PartitionFile = # Domain partition polygon file *_part.pol for parallel run AngLat = 55. # Angle of latitude S-N (deg), 0: no Coriolis AngLon = 0. # Angle of longitude E-W (deg), 0: Greenwich, used in solar heat flux computation. Conveyance2D = -1 # -1: R=HU,0: R=H, 1: R=A/P, 2: K=analytic-1D conv, 3: K=analytic-2D conv Slotw2D = 0. # - Sillheightmin = 0.5 # Weir treatment only if both sills larger than this value (m) Makeorthocenters = 0 # Switch from circumcentres to orthocentres in geominit (i>=1: number of iterations, 0: do not use) Dcenterinside = 1. # Limit cell center (1.0: in cell, 0.0: on c/g) Bamin = 1.d-6 # Minimum grid cell area, in combination with cut cells OpenBoundaryTolerance = 3. # Search tolerance factor between boundary polyline and grid cells, in cell size units RenumberFlowNodes = 0 # Renumber the flow nodes (1: yes, 0: no) Kmx = 8 # Maximum number of vertical layers Layertype = 1 # Vertical layer type (1: all sigma, 2: all z, 3: use VertplizFile) Numtopsig = 0 # Number of sigma layers in top of z-layer model SigmaGrowthFactor = 1. # Layer thickness growth factor from bed up StretchType = -1 # Type of layer stretching, 0 = uniform, 1 = user defined, 2 = fixed level double exponential [numerics] CFLMax = 0.7 # Maximum Courant number Lincontin = 0 # Default 0; Set to 1 for linearizing d(Hu)/dx; link to AdvecType AdvecType = 33 # Advection type (0: none, 1: Wenneker, 2: Wenneker q(uio-u), 3: Perot q(uio-u), 4: Perot q(ui-u), 5: Perot q(ui-u) without itself) TimeStepType = 2 # Time step handling (0: only transport, 1: transport + velocity update, 2: full implicit step-reduce, 3: step-Jacobi, 4: explicit) Icoriolistype = 5 # 0=No, 1=yes, if jsferic then spatially varying, if icoriolistype==6 then constant (anglat) Limtyphu = 0 # Limiter type for waterdepth in continuity eqn. (0: none, 1: minmod, 2: van Leer, 3: Kooren, 4: monotone central) Limtypmom = 4 # Limiter type for cell center advection velocity (0: none, 1: minmod, 2: van Leer, 3: Kooren, 4: monotone central) Limtypsa = 4 # Limiter type for salinity transport (0: none, 1: minmod, 2: van Leer, 3: Kooren, 4: monotone central) TransportMethod = 1 # Transport method (0: Herman's method, 1: transport module) TransportTimestepping = 1 # Timestepping method in Transport module, 0 = global, 1 = local (default) Vertadvtypsal = 5 # Vertical advection type for salinity (0: none, 1: upwind explicit, 2: central explicit, 3: upwind implicit, 4: central implicit, 5: central implicit but upwind for neg. stratif., 6: higher order explicit, no Forester) Vertadvtyptem = 6 # Vertical advection type for temperature (0: none, 1: upwind explicit, 2: central explicit, 3: upwind implicit, 4: central implicit, 5: central implicit but upwind for neg. stratif., 6: higher order explicit, no Forester) Cffacver = 0. # Factor for including (1-CFL) in HO term vertical (0d0: no, 1d0: yes) Jarhoxu = 0 # Inlcude density gradient in advection term (0: no, 1: yes, 2: Also in barotrop and baroclin pressure term) Horadvtypzlayer = 0 # Horizontal advection treatment of z-layers (1: default, 2: sigma-like) Zlayeratubybob = 0 # Lowest connected cells governed by bob instead of by bL L/R Icgsolver = 4 # Solver type (1: sobekGS_OMP, 2: sobekGS_OMPthreadsafe, 3: sobekGS, 4: sobekGS + Saadilud, 5: parallel/global Saad, 6: parallel/Petsc, 7: parallel/GS) Maxdegree = 6 # Maximum degree in Gauss elimination Noderivedtypes = 5 # 0=use der. types. , 1 = less, 2 = lesser, 5 = also dealloc der. types FixedWeirScheme = 0 # Fixed weir scheme (0: none, 1: compact stencil, 2: whole tile lifted, full subgrid weir + factor) FixedWeirContraction = 1. # Fixed weir flow width contraction factor Fixedweirfrictscheme = 1 # Fixed weir friction scheme (0: friction based on hu, 1: friction based on subgrid weir friction scheme) Fixedweirtopwidth = 3. # Uniform width of the groyne part of fixed weirs Fixedweirtopfrictcoef = -999. # Uniform friction coefficient of the groyne part of fixed weirs Fixedweirtalud = 0.25 # Uniform talud slope of fixed weirs Izbndpos = 0 # Position of z boundary (0: D3Dflow, 1: on net boundary, 2: on specified polyline) Tlfsmo = 0. # Fourier smoothing time (s) on water level boundaries Logprofatubndin = 1 # ubnds inflow: 0=uniform U1, 1 = log U1, 2 = user3D Logprofkepsbndin = 1 # inflow: 0=0 keps, 1 = log keps, 2 = user3D Slopedrop2D = 0. # Apply drop losses only if local bed slope > Slopedrop2D, (<=0: no drop losses) Drop3D = 0. # Apply droplosses in 3D if z upwind below bob + 2/3 hu*drop3D Chkadvd = 0.1 # Check advection terms if depth < chkadvdp, => less setbacks Trsh_u1Lb = 0. # 2D bedfriction in 3D below this threshold (m) Epshstem = 1.d-3 # Only compute heatflx + evap if depth > epshstem Zwsbtol = 0. # tolerance for zws(kb-1) at bed Keepzlayeringatbed = 1 # bedlayerthickness = zlayerthickness at bed 0 or 1 Teta0 = 0.55 # Theta of time integration (0.5 < theta < 1) Qhrelax = 1.d-2 # Relaxation on Q-h open boundaries Jbasqbnddownwindhs = 0 # Water depth scheme at discharge boundaries (0: original hu, 1: downwind hs) cstbnd = 0 # Delft-3D type velocity treatment near boundaries for small coastal models (1: yes, 0: no) Maxitverticalforestersal = 100 # Forester iterations for salinity (0: no vertical filter for salinity, > 0: max nr of iterations) Maxitverticalforestertem = 0 # Forester iterations for temperature (0: no vertical filter for temperature, > 0: max nr of iterations) Turbulencemodel = 3 # Turbulence model (0: none, 1: constant, 2: algebraic, 3: k-epsilon, 4: k-tau) Turbulenceadvection = 3 # Turbulence advection (0: none, 3: horizontally explicit and vertically implicit) Eddyviscositybedfacmax = 0. # Limit eddy viscosity at bed ) AntiCreep = 0 # Include anti-creep calculation (0: no, 1: yes) Barocterm = 2 # (original = 1, current = 2 ) Maxwaterleveldiff = 0. # upper bound (in m) on water level changes (<= 0: no bounds). Run will abort when violated. Maxvelocitydiff = 0. # upper bound (in m/s) on velocity changes (<= 0: no bounds). Run will abort when violated. MinTimestepBreak = 0. # smallest allowed timestep (in s), checked on a sliding average of several timesteps. Run will abort when violated. Epshu = 1.d-4 # Threshold water depth for wet and dry cells SobekDFM_umin = 0. # Minimal velocity treshold for weir losses in Sobek-DFM coupling. SobekDFM_umin_method = 0 # Method for minimal velocity treshold for weir losses in Sobek-DFM coupling. SobekDFM_Minimal_1d2d_Embankment = 1.d-2 # Minimal crest height of 1D2D SOBEK-DFM embankments. sobekDFM_relax = 0.1 # Relaxation factor for SOBEK-DFM coupling algorithm. Vertadvtypmom = 3 # vertical advection for u1: 0: No, 3: Upwind implicit, 4: Central implicit, 5: QUICKEST implicit., 6: centerbased upwind expl jaupwindsrc = 1 # 1st-order upwind advection at sources/sinks (1) or higher-order (0) jasfer3D = 0 # corrections for spherical coordinates vicouv_filter = 0. # artificial viscosity for filtering (m2/s) LocSaltLev = 1. # salinity level for case of lock exchange LocSaltMin = 5. # minimum salinity for case of lock exchange LocSaltMax = 10. # maximum salinity for case of lock exchange Numlimdt_baorg = 0 # if previous numlimdt > Numlimdt_baorg keep original cell area ba in cutcell [physics] UnifFrictCoef = 65. # Uniform friction coefficient (0: no friction) UnifFrictType = 0 # Uniform friction type (0: Chezy, 1: Manning, 2: White-Colebrook, 3: idem, WAQUA style) UnifFrictCoef1D = 2.3d-2 # Uniform friction coefficient in 1D links (0: no friction) UnifFrictCoef1D2D = 2.3d-2 # Uniform friction coefficient in 1D links (0: no friction) UnifFrictCoefLin = 0. # Uniform linear friction coefficient for ocean models (m/s) (0: no friction) Umodlin = 0. # Linear friction umod, for ifrctyp=4,5,6 Vicouv = 2. # Uniform horizontal eddy viscosity (m2/s) Dicouv = 10. # Uniform horizontal eddy diffusivity (m2/s) Vicoww = 1.d-6 # Uniform vertical eddy viscosity (m2/s) Dicoww = 1.d-6 # Uniform vertical eddy diffusivity (m2/s) Vicwminb = 0. # Minimum visc in prod and buoyancy term (m2/s) Xlozmidov = 0. # Ozmidov length scale (m), default=0.0, no contribution of internal waves to vertical diffusion Smagorinsky = 0. # Smagorinsky factor in horizontal turbulence, e.g. 0.15 Elder = 0. # Elder factor in horizontal turbulence irov = 0 # 0=free slip, 1 = partial slip using wall_ks wall_ks = 0. # Wall roughness type (0: free slip, 1: partial slip using wall_ks) Rhomean = 1000. # Average water density (kg/m3) Idensform = 0 # Density calulation (0: uniform, 1: Eckard, 2: Unesco, 3: baroclinic case) Ag = 9.81 # Gravitational acceleration TidalForcing = 0 # Tidal forcing, if jsferic=1 (0: no, 1: yes) SelfAttractionLoading = 0 # Self attraction and loading (0=no, 1=yes, 2=only self attraction) ITcap = 0. # Upper limit on internal tides dissipation (W/m^2) Doodsonstart = 55.565 # TRIWAQ: 55.565, D3D: 57.555 Doodsonstop = 375.575 # TRIWAQ: 375.575, D3D: 275.555 Doodsoneps = 3.d-2 # TRIWAQ = 0.0 400 cmps , D3D = 0.03 60 cmps VillemonteCD1 = 1. # Calibration coefficient for Villemonte. Default = 1.0. NB. For Bloemberg data set 0.8 is recommended. VillemonteCD2 = 10. # Calibration coefficient for Villemonte. Default = 10.0. NB. For Bloemberg data set 0.8 is recommended. Salinity = 0 # Include salinity, (0=no, 1=yes) InitialSalinity = 0. # Uniform initial salinity concentration (ppt) Sal0abovezlev = -999. # Vertical level (m) above which salinity is set 0 DeltaSalinity = -999. # for testcases Salimax = -999. # Limit the salinity Salimin = 0. # Limit the salinity Backgroundsalinity = 30. # Background salinity for eqn. of state (ppt) Backgroundwatertemperature = 6. # Background water temperature for eqn. of state (deg C) Temperature = 0 # Include temperature (0: no, 1: only transport, 3: excess model of D3D, 5: composite (ocean) model) InitialTemperature = 6. # Uniform initial water temperature (degC) Secchidepth = 1. # Water clarity parameter (m) Stanton = -1. # Coefficient for convective heat flux, if negative, Ccon = abs(Stanton)*Cdwind Dalton = -1. # Coefficient for evaporative heat flux, if negative, Ceva = abs(Dalton)*Cdwind Tempmax = -999. # Limit the temperature Tempmin = 0. # Limit the temperature Surftempsmofac = 0. # Hor . Smoothing factor for surface water in heatflx comp. (0.0-1.0), 0=no Soiltempthick = 0.1 # Use soil temperature buffer if > 0, e.g. 0.2 (m) Heat_eachstep = 1 # 1=heat each timestep, 0=heat each usertimestep SecondaryFlow = 0 # Secondary flow (0: no, 1: yes) BetaSpiral = 0. # Weight factor of the spiral flow intensity on flow dispersion stresses Equili = 0 # Equilibrium spiral flow intensity (0: no, 1: yes) [sediment] Sedimentmodelnr = 0 # Sediment model nr, (0=no, 1=Krone, 2=SvR2007, 3=E-H, 4=MorphologyModule) Nr_of_sedfractions = 0 # Nr of sediment fractions, (specify the next parameters for each fraction) MxgrKrone = 0 # Highest fraction index treated by Krone Seddenscoupling = 0 # Sed rho coupling (0=no, 1 =yes [veg] Vegetationmodelnr = 0 # Vegetation model nr, (0=no, 1=Baptist DFM) Clveg = 0.8 # Stem distance factor, default 0.8 () Cdveg = 0.7 # Stem Cd coefficient , default 0.7 () Cbveg = 0. # Stem stiffness coefficient , default 0.7 () Rhoveg = 0. # Stem Rho, if > 0, -> bouyant stick procedure, default 0.0 () Stemheightstd = 0. # Stem height standard deviation fraction, e.g. 0.1 () [wind] ICdtyp = 2 # Wind drag coefficient type (1=Const; 2=Smith&Banke (2 pts); 3=S&B (3 pts); 4=Charnock 1955, 5=Whang 2005, 6=Wuest 2005, 7=Hersbach 2010 (2 pts) Cdbreakpoints = 2.5d-3 2.5d-3 # Wind drag coefficient break points Windspeedbreakpoints = 0. 100. # Wind speed break points (m/s) Relativewind = 0 # Wind speed relative to top-layer water speed, 1=yes, 0 = no) Rhoair = 1. # Air density (kg/m3) PavBnd = 101325. # Average air pressure on open boundaries (N/m2) (only applied if > 0) Pavini = 0. # Average air pressure for initial water level correction (N/m2) (only applied if > 0) [grw] groundwater = 0 # 0=No (horizontal) groundwater flow, 1=With groundwater flow Infiltrationmodel = 0 # 0=No infiltration, 1=infiltration=interceptionlayer (with grw), 2=infiltration=Infiltrationcapacity, 3=model unsaturated/saturated (with grw) ( ) Hinterceptionlayer = 0. # Intercept this amount of rain (m) UnifInfiltrationCapacity = 0. # Uniform maximum infiltration capacity (m/s) Conductivity = 0. # non dimensionless K conductivity saturated (m/s), Q = K*A*i (m3/s) h_aquiferuni = 20. # bgrw = bl - h_aquiferuni (m), if negative, bgrw = bgrwuni h_unsatini = 0.200000002980232 # initial level groundwater is bedlevel - h_unsatini (m), if negative, sgrw = sgrwini [waves] Wavemodelnr = 0 # Wave model nr. (0: none, 1: fetch/depth limited hurdlestive, 2: Young-Verhagen, 3: SWAN, 4: wave group forcing, 5: uniform Wavenikuradse = 1.d-2 # Wave friction Nikuradse ks coefficient (m), used in Krone-Swart Rouwav = FR84 # Friction model for wave induced shear stress: FR84 (default) or: MS90, HT91, GM79, DS88, BK67, CJ85, OY88, VR04 Gammax = 1. # Maximum wave height/water depth ratio uorbfac = 0 # Orbital velocities: 0=D3D style; 1=Guza style hminlw = 0.2 # Cut-off depth for application of wave forces in momentum balance [time] RefDate = 19900805 # Reference date (yyyymmdd) Tzone = 0. # Time zone assigned to input time series DtUser = 30. # Time interval (s) for external forcing update DtNodal = 0. # Time interval (s) for updating nodal factors in astronomical boundary conditions DtMax = 30. # Maximal computation timestep (s) Dtfacmax = 1.1 # Max timestep increase factor ( ) DtInit = 1. # Initial computation timestep (s) Timestepanalysis = 0 # 0=no, 1=see file *.steps Autotimestepdiff = 0 # 0 = no, 1 = yes (Time limitation based on explicit diffusive term) Tunit = M # Time unit for start/stop times (D, H, M or S) TStart = 0. # Start time w.r.t. RefDate (in TUnit) TStop = 1500. # Stop time w.r.t. RefDate (in TUnit) [restart] RestartFile = # Restart netcdf-file, either *_rst.nc or *_map.nc RestartDateTime = 19900805000000 # Restart date and time (YYYYMMDDHHMMSS) when restarting from *_map.nc [external forcing] ExtForceFile = f34.ext # Old format for external forcings file *.ext, link with tim/cmp-format boundary conditions specification ExtForceFileNew = # New format for external forcings file *.ext, link with bc-format boundary conditions specification Rainfall = 0 # Include rainfall, (0=no, 1=yes) [trachytopes] TrtRou = N # Include alluvial and vegetation roughness (trachytopes) (Y: yes, N: no) TrtDef = # File (*.ttd) including trachytope definitions TrtL = # File (*.arl) including distribution of trachytope definitions DtTrt = 1200. # Trachytope roughness update time interval (s) [calibration] UseCalibration = 0 # Activate calibration factor friction multiplier (1 = yes, 0 = no) DefinitionFile = # File (*.cld) including calibration definitions AreaFile = # File (*.cll) including area distribution of calibration definitions [output] OutputDir = dflowfmoutput # Output directory of map-, his-, rst-, dat- and timings-files, default: DFM_OUTPUT_. Set to . for current dir. FlowGeomFile = # Flow geometry NetCDF *_flowgeom.nc ObsFile = f34_obs.xyn # Points file *.xyn with observation stations with rows x, y, station name CrsFile = f34_crs.pli # Polyline file *_crs.pli defining observation cross sections FouFile = # Fourier analysis input file *.fou HisFile = f34_his.nc # HisFile name *_his.nc MapFile = f34_map.nc # MapFile name *_map.nc HisInterval = 300. 0. 90000. # History output times, given as "interval" "start period" "end period" (s) XLSInterval = 0. # Interval (s) between XLS history MapInterval = 3000. 0. 90000. # Map file output, given as "interval" "start period" "end period" (s) RstInterval = 86400. 0. 90000. # Restart file output times, given as "interval" "start period" "end period" (s) S1incinterval = 0. # Interval (m) in incremental file for water levels S1 WaqInterval = 0. 0. 90000. # DELWAQ output times, given as "interval" "start period" "end period" (s) StatsInterval = -60. # Screen step output interval in seconds simulation time, if negative in seconds wall clock time WriteBalancefile = 0 # Write balance file (1: yes, 0: no) TimingsInterval = 0. # Timings statistics output interval TimeSplitInterval = 0X # Time splitting interval, after which a new output file is started. value+unit, e.g. '1 M', valid units: Y,M,D,h,m,s. MapFormat = 4 # Map file format, 1: netCDF, 2: Tecplot, 3: netCFD and Tecplot, 4: NetCDF-UGRID Wrihis_balance = 1 # Write mass balance totals to his file (1: yes, 0: no) Wrihis_sourcesink = 1 # Write sources-sinks statistics to his file (1=yes, 0=no) Wrihis_structure_gen = 1 # Write general structure parameters to his file (1: yes, 0: no) Wrihis_structure_dam = 1 # Write dam parameters to his file (1: yes, 0: no) Wrihis_structure_pump = 1 # Write pump parameters to his file (1: yes, 0: no) Wrihis_structure_gate = 1 # Write gate parameters to his file (1: yes, 0: no) Wrihis_structure_weir = 1 # Write weir parameters to his file (1: yes, 0: no) Wrihis_turbulence = 1 # Write k, eps and vicww to his file (1: yes, 0: no) Wrihis_wind = 1 # Write wind velocities to his file (1: yes, 0: no) Wrihis_rain = 1 # Write precipitation to his file (1: yes, 0: no) Wrihis_temperature = 1 # Write temperature to his file (1: yes, 0: no) Wrihis_heat_fluxes = 0 # Write heat fluxes to his file (1: yes, 0: no) Wrihis_salinity = 1 # Write salinity to his file (1: yes, 0: no) Wrihis_density = 1 # Write density to his file (1: yes, 0: no) Wrihis_waterlevel_s1 = 1 # Write water level to his file (1: yes, 0: no) Wrihis_waterdepth = 0 # Write waterd epth to his file (1: yes, 0: no) Wrihis_velocity_vector = 1 # Write velocity vectors to his file (1: yes, 0: no) Wrihis_upward_velocity_component = 0 # Write upward velocity to his file (1: yes, 0: no) Wrihis_sediment = 1 # Write sediment transport to his file (1: yes, 0: no) Wrihis_constituents = 1 # Write tracers to his file (1: yes, 0: no) Wrimap_waterlevel_s0 = 1 # Write water levels for previous time step to map file (1: yes, 0: no) Wrimap_waterlevel_s1 = 1 # Write water levels to map file (1: yes, 0: no) Wrimap_volume1 = 0 # Write volumes to map file (1: yes, 0: no) Wrimap_velocity_component_u0 = 1 # Write velocity component for previous time step to map file (1: yes, 0: no) Wrimap_velocity_component_u1 = 1 # Write velocity component to map file (1: yes, 0: no) Wrimap_velocity_vector = 1 # Write cell-center velocity vectors to map file (1: yes, 0: no) Wrimap_upward_velocity_component = 1 # Write upward velocity component on cell interfaces (1: yes, 0: no) Wrimap_density_rho = 1 # Write flow density to map file (1: yes, 0: no) Wrimap_horizontal_viscosity_viu = 1 # Write horizontal viscosity to map file (1: yes, 0: no) Wrimap_horizontal_diffusivity_diu = 1 # Write horizontal diffusivity to map file (1: yes, 0: no) Wrimap_flow_flux_q1 = 1 # Write flow flux to map file (1: yes, 0: no) Wrimap_spiral_flow = 1 # Write spiral flow to map file (1: yes, 0: no) Wrimap_numlimdt = 1 # Write the number times a cell was Courant limiting to map file (1: yes, 0: no) Wrimap_taucurrent = 1 # Write the shear stress to map file (1: yes, 0: no) Wrimap_chezy = 1 # Write the chezy roughness to map file (1: yes, 0: no) Wrimap_turbulence = 1 # Write vicww, k and eps to map file (1: yes, 0: no) Wrimap_wind = 1 # Write wind velocities to map file (1: yes, 0: no) Writek_CdWind = 1 # Write wind friction coeffs to tek file (1: yes, 0: no) WriteDFMinterpretedvalues = 0 # Write DFMinterpretedvalues (1: yes, 0: no) MapOutputTimeVector = # File (*.mpt) containing fixed map output times (s) w.r.t. RefDate FullGridOutput = 0 # Full grid output mode (0: compact, 1: full time-varying grid data) EulerVelocities = 0 # Euler velocities output (0: GLM, 1: Euler velocities) Wrirst_bnd = 1 # Write waterlevel, bedlevel and coordinates of boundaries to restart files Writepart_domain = 1 # Write partition domain info. for postprocessing [particles] ParticlesFile = AddTracer = 0 # add tracer (1) or not (other) StartTime = 0. # starttime (if >0) TimeStep = 0. # time step (>0) or every computational time step 3Dtype = 0 # 3D type: depth averaged (0) or free surface (1) [processes] SubstanceFile = # AdditionalHistoryOutputFile = # ProcesDatabaseFile = proc_def # DtProcesses = 0. # waq processes time step ProcessFluxIntegration = 1 # Process fluxes integration option (1: WAQ, 2: D-Flow FM) ** INFO : ** ** INFO : Start of the computation time loop ** INFO : Writing initial output to file(s)... ** DEBUG : Opened NetCDF file 'dflowfmoutput\f34_his.nc' as #4. ** DEBUG : Opened NetCDF file 'dflowfmoutput\f34_map.nc' as #5. ** DEBUG : Opened NetCDF file 'dflowfmoutput\f34_19900805_000000_rst.nc' as #6. ** DEBUG : Closed NetCDF file 'dflowfmoutput\f34_19900805_000000_rst.nc. ** INFO : Done writing initial output to file(s). ** INFO : Sim. time done Sim. time left Real time used Real time left Steps left Complete% Interval-averaged time step ** INFO : 0d 0:01:00 1d 0:59:00 0d 0:00:00 0d 0:01:10 2998 0.1% 0.00000 ** DEBUG : Opened NetCDF file 'dflowfmoutput\f34_19900806_000000_rst.nc' as #6. ** DEBUG : Closed NetCDF file 'dflowfmoutput\f34_19900806_000000_rst.nc. ** DEBUG : Opened NetCDF file 'dflowfmoutput\f34_19900806_010000_rst.nc' as #6. ** DEBUG : Closed NetCDF file 'dflowfmoutput\f34_19900806_010000_rst.nc. ** INFO : ** INFO : ** INFO : ** INFO : nr of netnodes ( ) : 258 ** INFO : nr of netlinks ( ) : 479 ** INFO : nr of flownodes ( ) : 235 ** INFO : nr of openbnd cells ( ) : 13 ** INFO : nr of 1D-flownodes ( ) : 0 ** INFO : model area (m2) : 0.6119620791E+09 ** INFO : model volume (m3) : 0.2617995652E+10 ** INFO : ** INFO : ** INFO : ** INFO : nr of timesteps ( ) : 3018.0000000000 ** INFO : average timestep (s) : 29.8210735586 ** INFO : ** INFO : ** INFO : simulation period (d) : 1.0416666667 ** INFO : total computation time (d) : 0.0000746181 ** INFO : time modelinit (d) : 0.0000010880 ** INFO : time steps (+ plots) (d) : 0.0000735301 ** INFO : ** INFO : simulation period (h) : 25.0000000000 ** INFO : total computation time (h) : 0.0017908333 ** INFO : time modelinit (h) : 0.0000261111 ** INFO : time steps (+ plots) (h) : 0.0017647222 ** INFO : ** INFO : simulation period (s) : 90000.0000000000 ** INFO : total computation time (s) : 6.4470000000 ** INFO : time modelinit (s) : 0.0940000000 ** INFO : time steps (+ plots) (s) : 6.3530000000 ** INFO : ** INFO : ** INFO : time inistep (s) : 2.4309999999 ** INFO : time setumod (s) : 1.1440000000 ** INFO : time furu (s) : 2.6640000000 ** INFO : time solve (s) : 0.5080000000 ** INFO : time setexternalforc. (s) : 0.1130000000 ** INFO : time setexternalfbnd. (s) : 0.0470000000 ** INFO : time steps (s) : 6.0500000000 ** INFO : fraction solve/steps ( ) : 0.0839669422 ** INFO : total/(dnt*ndx) (s) : 0.0000089576 ** INFO : av nr of cont. it s1it ( ) : 0.0000000000 ** INFO : time transport [s] : 0.0320000000 ** INFO : time processes [s] : 0.0000000000 ** INFO : time debug [s] : 0.0000000000 ** INFO : ** INFO : ** INFO : ** INFO : Computation started at: 16:50:34, 24-09-2018 ** INFO : Computation finished at: 16:50:41, 24-09-2018 ** INFO : ** INFO : simulation period (h) : 25.0000000000 ** INFO : total time in timeloop (h) : 0.0017647222 ** INFO : MPI : no. ** INFO : OpenMP : yes. #threads max : 8 ** INFO : ** INFO : ** INFO : ** INFO :