Deltares, DELWAQ Version 5.06.00.7339, Jul 03 2017, 20:33:35 Execution start: 2017/10/10 14:58:13 found -a command line switch only activated processes are switched on found -p command line switch WARNING reading element ITEM_SN Apparently this processes definition file has not been adapted for NetCDF Ignoring standard names and units NetCDF Using process definition file : d:\delwaq\5.06.00.7339\win64\\default\proc_def Version number : 5.06 Serial : 2017030901 found -eco command line switch using eco input file:d:\delwaq\5.06.00.7339\win64\\default\bloom.spe Model : Reference setup for spoof model Run : T0: 2014.01.01 00:00:00 (scu= 1s) # scanning input for old process definitions found only_active constant only activated processes are switched on total number of substances with fractions : 0 # Determining which processes can be switched on Input for [DynDepth ] dynamic calculation of the depth Process is activated Input for [TotDepth ] depth water column Process is activated Input for [Salinchlor ] Conversion of salinity into chloride or vv Process is activated Input for [VertDisp ] Vertical dispersion (segment -> exchange) Process is activated Input for [Extinc_VLG ] Extinction of visible-light (370-680nm) DLWQ-G Process is activated Input for [Extinc_UVG ] Extinction of ultraviolet-light (350-480nm) DLWQ-G Process is activated Input for [CalcRadUV ] UV-Radiation at segment upper and lower boundaries Process is activated Input for [EColiMrt ] Mortality EColi bacteria Process is activated Input for [Secchi ] Secchi depth for visible-light (370-680nm) Process is activated # determinig the processes to model the substances. -fluxes for [Salinity ] no fluxes found -dispersion for [Salinity ] found dispersion[VertDisp ] vertical dispersion from proces [VertDisp ] Vertical dispersion (segment -> exchange) process is switched on. -velocity for [Salinity ] no velocity found -fluxes for [IM1 ] no fluxes found -dispersion for [IM1 ] found dispersion[VertDisp ] vertical dispersion from proces [VertDisp ] Vertical dispersion (segment -> exchange) process is switched on. -velocity for [IM1 ] no velocity found -fluxes for [EColi ] found flux [dMrtEColi ] mortality flux EColi from proces [EColiMrt ] Mortality EColi bacteria process is switched on. -dispersion for [EColi ] found dispersion[VertDisp ] vertical dispersion from proces [VertDisp ] Vertical dispersion (segment -> exchange) process is switched on. -velocity for [EColi ] no velocity found # locating processes for requested output # determining the input for the processes (in reversed order) Input for [Secchi ] Secchi depth for visible-light (370-680nm) [ExtVl ] total extinction coefficient visible light Using output from proces [Extinc_VLG ] [IM1 ] inorganic matter (IM1) Using substance nr 2 [IM2 ] inorganic matter (IM2) using default value: 0.00000 [IM3 ] inorganic matter (IM3) using default value: 0.00000 [POC1 ] POC1 (fast decomposing fraction) using default value: 0.00000 [POC2 ] POC2 (medium decomposing fraction) using default value: 0.00000 [POC3 ] POC3 (slow decomposing fraction) using default value: 0.00000 [POC4 ] POC4 (particulate refractory fraction) using default value: 0.00000 [ExtVlODS ] VL extinction by DOC Using output from proces [Extinc_VLG ] [Chlfa ] Chlorophyll-a concentration using default value: 0.00000 [SW_Uitz ] Extinction by Uitzicht On (1) or Off (0) using default value: 0.00000 [UitZDEPT1 ] Z1 (depth) using default value: 1.20000 [UitZDEPT2 ] Z2 (depth) using default value: 1.000000 [UitZCORCH ] CORa correction factor using default value: 2.50000 [UitZC_DET ] C3 coeff. absorption ash weight & detritus using default value: 0.260000E-01 [UitZC_GL1 ] C1 coeff. absorption ash weight & detritus using default value: 0.730000 [UitZC_GL2 ] C2 coeff. absorption ash weight & detritus using default value: 1.000000 [UitZHELHM ] Hel_h constant using default value: 0.140000E-01 [UitZTAU ] Tau constant calculation transparency using default value: 7.80000 [UitZangle ] Angle of incidence solar radiation using default value: 30.0000 [DMCFDetC ] DM:C ratio DetC using default value: 2.50000 [PAConstant ] Poole-Atkins constant using default value: 1.70000 Input for [EColiMrt ] Mortality EColi bacteria [EColi ] E. Coli bacteria Using substance nr 3 [RcMrtEColi ] first-order mortality rate EColi Using constant nr 1 with value: 0.800000 [TcMrtEColi ] temperature coefficient for mortality EColi using default value: 1.07000 [Temp ] ambient water temperature Using constant nr 2 with value: 15.0000 [CTMrtEColi ] critical temperature for mortality EColi using default value: 2.00000 [Cl ] Chloride Using output from proces [Salinchlor ] [Rad_uv ] UV-irradiation at the segment upper-boundary Using output from proces [CalcRadUV ] [CFRAD ] conversion factor RAD to mortality rate using default value: 0.860000E-01 [DayL ] daylength <0-1> Using constant nr 3 with value: 0.580000 [FrUvVL ] fraction UV light in visible light using default value: 0.120000 [ExtUv ] total extinction coefficient UV light Using output from proces [Extinc_UVG ] [Depth ] depth of segment Using output from proces [DynDepth ] [SpMrtEColi ] chloride enhanced mortality rate EColi using default value: 0.110000E-04 Input for [CalcRadUV ] UV-Radiation at segment upper and lower boundaries [ExtUv ] total extinction coefficient UV light Using output from proces [Extinc_UVG ] [Depth ] depth of segment Using output from proces [DynDepth ] [RadSurf ] irradiation at the water surface Using constant nr 4 with value: 100.0000 [a_enh ] enhancement factor in radiation calculation using default value: 1.50000 [Surf ] horizontal surface area of a DELWAQ segment Using parameter nr 1 [SwEmersion ] switch indicating submersion(0) or emersion(1) using default value: 0.00000 [RadBot_uv ] UV-irradiation at the segment lower-boundary Using output from proces [CalcRadUV ] [fRefl ] fraction of radiation reflected at water surface using default value: 0.00000 Input for [Extinc_UVG ] Extinction of ultraviolet-light (350-480nm) DLWQ-G [ExtUvIM1 ] UV specific extinction coefficent IM1 Using constant nr 5 with value: 0.100000E-01 [ExtUvIM2 ] UV specific extinction coefficent IM2 using default value: 0.100000E-01 [ExtUvIM3 ] UV specific extinction coefficent IM3 using default value: 0.100000E-01 [ExtUVPOC1 ] UV specific extinction coefficient POC1 using default value: 0.100000E+00 [ExtUvBak ] background extinction UV light Using constant nr 6 with value: 0.800000E-01 [ExtUvPhyt ] UV extinction by phytoplankton using default value: 0.00000 [ExtUvMacro ] UV extinction by macrophytes using default value: 0.00000 [IM1 ] inorganic matter (IM1) Using substance nr 2 [IM2 ] inorganic matter (IM2) using default value: 0.00000 [IM3 ] inorganic matter (IM3) using default value: 0.00000 [POC1 ] POC1 (fast decomposing fraction) using default value: 0.00000 [POC2 ] POC2 (medium decomposing fraction) using default value: 0.00000 [SW_Uitz ] Extinction by Uitzicht On (1) or Off (0) using default value: 0.00000 [DOC ] Dissolved Organic Carbon (DOC) using default value: 0.00000 [ExtUVDOC ] UV specific extinction coefficient DOC using default value: 0.00000 [UitZDEPT1 ] Z1 (depth) using default value: 1.20000 [UitZDEPT2 ] Z2 (depth) using default value: 1.000000 [UitZCORCH ] CORa correction factor using default value: 2.50000 [UitZC_DET ] C3 coeff. absorption ash weight & detritus using default value: 0.260000E-01 [UitZC_GL1 ] C1 coeff. absorption ash weight & detritus using default value: 0.730000 [UitZC_GL2 ] C2 coeff. absorption ash weight & detritus using default value: 1.000000 [UitZHELHM ] Hel_h constant using default value: 0.140000E-01 [UitZTAU ] Tau constant calculation transparency using default value: 7.80000 [UitZangle ] Angle of incidence solar radiation using default value: 30.0000 [DMCFDetC ] DM:C ratio DetC using default value: 2.50000 [ExtUVSal0 ] extra UV extinction at Salinity = 0 using default value: 0.00000 [Salinity ] Salinity Using substance nr 1 [SalExt0 ] salinity value for extra extinction = 0 using default value: 34.9200 [ExtUVPOC2 ] UV specific extinction coefficient POC2 using default value: 0.100000E+00 [ExtUVPOC3 ] UV specific extinction coefficient POC3 using default value: 0.100000E+00 [ExtUVPOC4 ] UV specific extinction coefficient POC4 using default value: 0.100000E+00 [POC3 ] POC3 (slow decomposing fraction) using default value: 0.00000 [POC4 ] POC4 (particulate refractory fraction) using default value: 0.00000 Input for [Extinc_VLG ] Extinction of visible-light (370-680nm) DLWQ-G [ExtVlIM1 ] VL specific extinction coefficient IM1 using default value: 0.100000E-01 [ExtVlIM2 ] VL specific extinction coefficient IM2 using default value: 0.100000E-01 [ExtVlIM3 ] VL specific extinction coefficient IM3 using default value: 0.100000E-01 [ExtVlPOC1 ] VL specific extinction coefficient POC1 using default value: 0.100000E+00 [ExtVlBak ] background extinction visible light using default value: 0.800000E-01 [ExtVlPhyt ] VL extinction by phytoplankton using default value: 0.00000 [ExtVlMacro ] VL extinction by macrophytes using default value: 0.00000 [IM1 ] inorganic matter (IM1) Using substance nr 2 [IM2 ] inorganic matter (IM2) using default value: 0.00000 [IM3 ] inorganic matter (IM3) using default value: 0.00000 [POC1 ] POC1 (fast decomposing fraction) using default value: 0.00000 [POC2 ] POC2 (medium decomposing fraction) using default value: 0.00000 [SW_Uitz ] Extinction by Uitzicht On (1) or Off (0) using default value: 0.00000 [DOC ] Dissolved Organic Carbon (DOC) using default value: 0.00000 [ExtVlDOC ] VL specific extinction coefficient DOC using default value: 0.00000 [UitZDEPT1 ] Z1 (depth) using default value: 1.20000 [UitZDEPT2 ] Z2 (depth) using default value: 1.000000 [UitZCORCH ] CORa correction factor using default value: 2.50000 [UitZC_DET ] C3 coeff. absorption ash weight & detritus using default value: 0.260000E-01 [UitZC_GL1 ] C1 coeff. absorption ash weight & detritus using default value: 0.730000 [UitZC_GL2 ] C2 coeff. absorption ash weight & detritus using default value: 1.000000 [UitZHELHM ] Hel_h constant using default value: 0.140000E-01 [UitZTAU ] Tau constant calculation transparency using default value: 7.80000 [UitZangle ] Angle of incidence solar radiation using default value: 30.0000 [DMCFDetC ] DM:C ratio DetC using default value: 2.50000 [ExtVLSal0 ] extra VL extinction at Salinity = 0 using default value: 0.00000 [Salinity ] Salinity Using substance nr 1 [SalExt0 ] salinity value for extra extinction = 0 using default value: 34.9200 [ExtVlPOC2 ] VL specific extinction coefficient POC2 using default value: 0.100000E+00 [ExtVlPOC3 ] VL specific extinction coefficient POC3 using default value: 0.100000E+00 [ExtVlPOC4 ] VL specific extinction coefficient POC4 using default value: 0.100000E+00 [POC3 ] POC3 (slow decomposing fraction) using default value: 0.00000 [POC4 ] POC4 (particulate refractory fraction) using default value: 0.00000 Input for [VertDisp ] Vertical dispersion (segment -> exchange) [VertDisper ] vertical dispersion Using segment function nr 1 [ScaleVdisp ] scaling factor for vertical diffusion Using constant nr 11 with value: 1.000000 Input for [Salinchlor ] Conversion of salinity into chloride or vv [Salinity ] Salinity Using substance nr 1 [Cl ] Chloride Using output from proces [Salinchlor ] [GtCl ] Salinity:Chloride ratio in sea water using default value: 1.80500 [Temp ] ambient water temperature Using constant nr 2 with value: 15.0000 [Sal0 ] salinity at zero chloride concentration using default value: 0.300000E-01 [SWSalCl ] option: 0.0 salinity simulated, 1.0 Cl simultated using default value: 0.00000 Input for [TotDepth ] depth water column [Depth ] depth of segment Using output from proces [DynDepth ] [Surf ] horizontal surface area of a DELWAQ segment Using parameter nr 1 Input for [DynDepth ] dynamic calculation of the depth [Volume ] volume of computational cell Using DELWAQ volume [Surf ] horizontal surface area of a DELWAQ segment Using parameter nr 1 # determining the use of the delwaq input info: constant [CLOSE_ERR ] is not used by the proces system info: constant [MaxIter ] is not used by the proces system info: constant [Tolerance ] is not used by the proces system info: constant [Iteration ] is not used by the proces system info: parameter [bottomdept] is not used by the proces system # locating requested output from active processes output [LocalDepth ] from proces [TotDepth ]