[SedimentFileInformation]
   FileCreatedBy    = Delft3D-FLOW-GUI, Version: 3.1804
   FileCreationDate = 19-12-2003,  8:50:45
   FileVersion      = 02.00
[SedimentOverall]
   Cref     =  1.537e+003          [kg/m3 ] = CSoil Reference density for hindered settling calculations
   IopSus   = 0               [  -   ] 1: Suspended sediment size is calculated dependent hydrodynamic conditions and d50
   BsSkin = false
   KsSilt = 0.001
   KsSand = 0.001
   Falflc   = true
   FlcNf    = 2.15
   FlcK2    = 1.
   FlcK3    = 5.
   FlcK4    =  .0070
   FlcD0    = 10.e-06
   FlcD     = 0.44
   FlWsmin  = 0.3e-3
   EroSchel = false
   EroSns   = 0.
   EroScv   = 3.e-9
   EroScu   = 400.
   EroSd50  = 20.e-6
   cons_mud = true
   cons_kk  = 0.0e-14
   cons_ksig= 2.0e8
   cons_eta = 1.0e5
   bingham     = true
   bin_cvisco  = 0.252
   bin_cnvisco = 2.35
   bin_cyield  = 30.0 
   bin_abingh  = 1000
   ero_intfc   = true
   conc_intfc  = 25.0
   pow_rich_zaki = 2.3529411764705882352941176470588
   slurry      = true
   carrierfluid= waterClay         # water (default), waterClay or waterClaySilt
   rheology    = Jacobs_vanKesteren # Winterwerp_Kranenburg , Jacobs_vanKesteren or Thomas, see keyword blocks below

[Sediment]
   Name   = #sediment coh1#  [  -   ] Name as specified in NamC in md-file
sedtyp= sand                          :SEDTYP, type of sediment (sand or mud)
tcrsed= 1.0000000e-001     [N/m2]    :TCDUNI, critical bed shear stress for sedimentation
tcrero= 1.0000000e+000     [N/m2]    :TCEUNI, critical bed shear stress for erosion
eropar= 9.9999997e-006     [kg/m2/s] :EROUNI, sediment erosion rate
rhosol= 2.6500000e+003     [kg/m3]   :RHOSOL, specific density
seddia= 0.0002                [m]    :SEDDIA, mean sediment diameter (D50)
cdryb= 10.0000000e+002     [kg/m3]   :CDRYB,  dry bed density
FacDSS = 1.0             [  -   ] FacDss * SedDia = Initial suspended sediment diameter. range [0.6 - 1.0]
sdbuni=2.5000000e+001     [kg/m2]   :SDBUNI, initial sediment mass at bed per unit area
[Sediment]
   Name   = #sediment coh2#  [  -   ] Name as specified in NamC in md-file
sedtyp=mud                           :SEDTYP, type of sediment (sand or mud)
rhosol= 2.6500000e+003     [kg/m3]   :RHOSOL, specific density
salmax= 0.0000000e+000     [ppt]     :SALMAX, salinity saline water
ws0= 30 0.0000001e-004     [m/s]     :WS0,    settling velocity fresh water
wsm= 30 0.0000001e-004     [m/s]     :WSM,    settling velocity saline water
tcrsed= 1.0000000e-006     [N/m2]    :TCDUNI, critical bed shear stress for sedimentation
tcrero= 1.0000000e+000     [N/m2]    :TCEUNI, critical bed shear stress for erosion
eropar= 9.9999997e-006     [kg/m2/s] :EROUNI, sediment erosion rate
cdryb=  5.0000000e+002     [kg/m3]   :CDRYB,  dry bed density
FacDSS = 1.0             [  -   ] FacDss * SedDia = Initial suspended sediment diameter. range [0.6 - 1.0]
sdbuni= 2.5000000e+001     [kg/m2]   :SDBUNI, initial sediment mass at bed per unit area