******************************************************************************** *** *** Deltares, FLOW2D3D Version 6.01.15.5640, Dec 10 2015, 16:00:23 *** built from : https://svn.oss.deltares.nl/repos/delft3d/branches/research/Deltares/20150421_33933_vs2013 *** *** runid : 1x1x36 *** date,time : 2015-12-11, 10:45:49 *** ******************************************************************************** *** MESSAGE Executable for 64-bits platform. *** MESSAGE Double precision computation using reals of kind 8 *** Start of User Defined Model description - - 10 layer waterbalance 1x1x36 m - Stagnant water - *** End of User Defined Model description *** MESSAGE Using UNESCO density formulation by default *** MESSAGE Momentum solver cyclic method is specified *** MESSAGE DRYFLP and DPSOPT both specified in MD-file. Using DPSOPT: MAX *** Start of waq parameters input Write waq output : Yes Start at time step : 0 Output every N time steps : 144 Stop at time step : 144 Aggregation (horizontal) : active only Aggregation (vertical) : 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 *** End of waq parameters input *** MESSAGE The communication file is written during the first time step only. Needed by WAQ. *** WARNING Latitude of your model is 0 degrees, model located at equator WAQ input written at itime 86400. Closure error: 0.000000E+00, 0.000000E+00( 36): Total[m3], Max.Rel.(segment) Maximum timestep: 0.00 s in computational element: 36 . Maximum timestep whole simulation: 0.00 *** Restart file written at 1440.0000 minutes after ITDATE *** Simulation finished ******************************************************* Performance timers: |---------------------------------------------------------------------| |Timer name | wall clock | CPU time | | |-----------------------|-----------------------| | | sec | % | sec | % | |---------------------------------------------------------------------| |Initialization | 0.23 | 16.2 | 0.05 | 13.6 | |Simulation | 1.19 | 82.2 | 0.30 | 86.4 | |Close and stop | 0.02 | 1.5 | 0.00 | 0.0 | | |------------- +|----- +|------------- +|----- +| |Total | 1.44 |100.0 | 0.34 |100.0 | |---------------------------------------------|-----------------------| |Momentum eq. | 0.01 | 0.6 | 0.00 | 0.0 | |Continuity eq. | 0.01 | 0.6 | 0.02 | 4.5 | |Transport eq. | 0.00 | 0.0 | 0.00 | 0.0 | |Turbulence | 0.00 | 0.3 | 0.00 | 0.0 | |3D Morphology | 0.00 | 0.0 | 0.00 | 0.0 | |---------------------------------------------|-----------------------| |Wait (dd module) | 0.00 | 0.0 | 0.00 | 0.0 | |Wait (ext. modules) | 0.00 | 0.0 | 0.00 | 0.0 | |---------------------------------------------------------------------| | Performance = CPU time / (TimeSteps*MMAX*NMAX*KMAX*LMAX) | | TimeSteps : 144 | | MMAX : 3 | | NMAX : 3 | | KMAX : 10 | | LMAX : 2 | | Performance : 0.13241E-04 [sec] | |---------------------------------------------------------------------| |Explanation: | | | |Initialization : Everything up to the first time step | |Simulation : All time steps | |Close and stop : Everything after the last time step | |Total : FLOW for this subdomain, | | excluding allocation/deallocation of global data | | | |Momentum eq. : Part of Simulation ("UZD") | |Continuity eq. : Part of Simulation ("SUD") | |Transport eq. : Part of Simulation ("DIFU") | | Only relevant when constituents are modelled. | |Turbulence : Part of Simulation ("TURCLO, TRATUR, TUR2D") | |3D Morphology : Part of Simulation ("EROSED, BOTT3D") | | Only relevant when sediments are modelled. | |Wait (dd) : Part of Initialization, Simulation and Closing. | | ("NXTSTP, NXTDRY") | | Only relevant when DomainDecomposition is used. | | Communication with and execution of the "mappers". | | Mappers are separate threads, possibly in another | | executable, possibly on another node. They copy | | data from one subdomain to another. | | FLOWs must wait while the mappers are executing, | | mappers must wait while the FLOWs are executing. | |Wait (ext) : Part of Initialization, Simulation and Closing. | | ("SYNC, _TO_, _FROM_") | | Communication with and execution of all "external" | | modules: | | Online WAVES, Online WAQ, Online RTC, Fluid Mud. | | | |---------------------------------------------------------------------| ******************************************************************************** *** *** FINISHED Delft3D-FLOW *** runid : 1x1x36 *** date, time : 2015-12-11, 10:45:50 *** ******************************************************************************** *** MESSAGE Removing file: TMP_1x1x36.grd *** MESSAGE Removing file: TMP_1x1x36.bct ******************************************************************************** *** *** Deltares, FLOW2D3D Version 6.01.15.5640, Dec 10 2015, 16:00:23 *** built from : https://svn.oss.deltares.nl/repos/delft3d/branches/research/Deltares/20150421_33933_vs2013 *** *** runid : 1x1x36 *** date,time : 2015-12-11, 10:47:10 *** ******************************************************************************** *** MESSAGE Executable for 64-bits platform. *** MESSAGE Double precision computation using reals of kind 8 *** Start of User Defined Model description - - 10 layer waterbalance 1x1x36 m - Stagnant water - *** End of User Defined Model description *** MESSAGE Using UNESCO density formulation by default *** MESSAGE Momentum solver cyclic method is specified *** MESSAGE DRYFLP and DPSOPT both specified in MD-file. Using DPSOPT: MAX *** Start of waq parameters input Write waq output : Yes Start at time step : 0 Output every N time steps : 144 Stop at time step : 144 Aggregation (horizontal) : active only Aggregation (vertical) : 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 *** End of waq parameters input *** MESSAGE The communication file is written during the first time step only. Needed by WAQ. *** WARNING Latitude of your model is 0 degrees, model located at equator *** MESSAGE Removing old output file: trih-1x1x36.dat *** MESSAGE Removing old output file: trih-1x1x36.def *** MESSAGE Removing old output file: trim-1x1x36.dat *** MESSAGE Removing old output file: trim-1x1x36.def WAQ input written at itime 86400. Closure error: 0.000000E+00, 0.000000E+00( 36): Total[m3], Max.Rel.(segment) Maximum timestep: 0.00 s in computational element: 36 . Maximum timestep whole simulation: 0.00 *** WARNING The file tri-rst.1x1x36.20140102.000000 for restart already exists, written over *** Restart file written at 1440.0000 minutes after ITDATE *** Simulation finished ******************************************************* Performance timers: |---------------------------------------------------------------------| |Timer name | wall clock | CPU time | | |-----------------------|-----------------------| | | sec | % | sec | % | |---------------------------------------------------------------------| |Initialization | 0.20 | 14.9 | 0.06 | 16.7 | |Simulation | 1.14 | 83.9 | 0.31 | 83.3 | |Close and stop | 0.02 | 1.2 | 0.00 | 0.0 | | |------------- +|----- +|------------- +|----- +| |Total | 1.36 |100.0 | 0.37 |100.0 | |---------------------------------------------|-----------------------| |Momentum eq. | 0.00 | 0.4 | 0.00 | 0.0 | |Continuity eq. | 0.02 | 1.2 | 0.05 | 12.5 | |Transport eq. | 0.00 | 0.0 | 0.00 | 0.0 | |Turbulence | 0.01 | 0.4 | 0.02 | 4.2 | |3D Morphology | 0.00 | 0.0 | 0.00 | 0.0 | |---------------------------------------------|-----------------------| |Wait (dd module) | 0.00 | 0.0 | 0.00 | 0.0 | |Wait (ext. modules) | 0.00 | 0.0 | 0.00 | 0.0 | |---------------------------------------------------------------------| | Performance = CPU time / (TimeSteps*MMAX*NMAX*KMAX*LMAX) | | TimeSteps : 144 | | MMAX : 3 | | NMAX : 3 | | KMAX : 10 | | LMAX : 2 | | Performance : 0.14445E-04 [sec] | |---------------------------------------------------------------------| |Explanation: | | | |Initialization : Everything up to the first time step | |Simulation : All time steps | |Close and stop : Everything after the last time step | |Total : FLOW for this subdomain, | | excluding allocation/deallocation of global data | | | |Momentum eq. : Part of Simulation ("UZD") | |Continuity eq. : Part of Simulation ("SUD") | |Transport eq. : Part of Simulation ("DIFU") | | Only relevant when constituents are modelled. | |Turbulence : Part of Simulation ("TURCLO, TRATUR, TUR2D") | |3D Morphology : Part of Simulation ("EROSED, BOTT3D") | | Only relevant when sediments are modelled. | |Wait (dd) : Part of Initialization, Simulation and Closing. | | ("NXTSTP, NXTDRY") | | Only relevant when DomainDecomposition is used. | | Communication with and execution of the "mappers". | | Mappers are separate threads, possibly in another | | executable, possibly on another node. They copy | | data from one subdomain to another. | | FLOWs must wait while the mappers are executing, | | mappers must wait while the FLOWs are executing. | |Wait (ext) : Part of Initialization, Simulation and Closing. | | ("SYNC, _TO_, _FROM_") | | Communication with and execution of all "external" | | modules: | | Online WAVES, Online WAQ, Online RTC, Fluid Mud. | | | |---------------------------------------------------------------------| ******************************************************************************** *** *** FINISHED Delft3D-FLOW *** runid : 1x1x36 *** date, time : 2015-12-11, 10:47:11 *** ******************************************************************************** *** MESSAGE Removing file: TMP_1x1x36.grd *** MESSAGE Removing file: TMP_1x1x36.bct ******************************************************************************** *** *** Deltares, FLOW2D3D Version 6.01.15.5640, Dec 10 2015, 16:00:23 *** built from : https://svn.oss.deltares.nl/repos/delft3d/branches/research/Deltares/20150421_33933_vs2013 *** *** runid : 1x1x36 *** date,time : 2015-12-11, 10:50:33 *** ******************************************************************************** *** MESSAGE Executable for 64-bits platform. *** MESSAGE Double precision computation using reals of kind 8 *** Start of User Defined Model description - - 10 layer waterbalance 1x1x36 m - Stagnant water - *** End of User Defined Model description *** MESSAGE Using UNESCO density formulation by default *** MESSAGE Momentum solver cyclic method is specified *** MESSAGE DRYFLP and DPSOPT both specified in MD-file. Using DPSOPT: MAX *** Start of waq parameters input Write waq output : Yes Start at time step : 0 Output every N time steps : 144 Stop at time step : 144 Aggregation (horizontal) : active only Aggregation (vertical) : 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 *** End of waq parameters input *** MESSAGE The communication file is written during the first time step only. Needed by WAQ. *** WARNING Latitude of your model is 0 degrees, model located at equator *** MESSAGE Removing old output file: trih-1x1x36.dat *** MESSAGE Removing old output file: trih-1x1x36.def *** MESSAGE Removing old output file: trim-1x1x36.dat *** MESSAGE Removing old output file: trim-1x1x36.def WAQ input written at itime 86400. Closure error: 0.000000E+00, 0.000000E+00( 36): Total[m3], Max.Rel.(segment) Maximum timestep: 87751.34 s in computational element: 1 . Maximum timestep whole simulation: 87751.34 *** WARNING The file tri-rst.1x1x36.20140102.000000 for restart already exists, written over *** Restart file written at 1440.0000 minutes after ITDATE *** Simulation finished ******************************************************* Performance timers: |---------------------------------------------------------------------| |Timer name | wall clock | CPU time | | |-----------------------|-----------------------| | | sec | % | sec | % | |---------------------------------------------------------------------| |Initialization | 0.46 | 28.2 | 0.06 | 19.0 | |Simulation | 1.15 | 70.4 | 0.27 | 81.0 | |Close and stop | 0.02 | 1.4 | 0.00 | 0.0 | | |------------- +|----- +|------------- +|----- +| |Total | 1.63 |100.0 | 0.33 |100.0 | |---------------------------------------------|-----------------------| |Momentum eq. | 0.00 | 0.2 | 0.00 | 0.0 | |Continuity eq. | 0.01 | 0.6 | 0.00 | 0.0 | |Transport eq. | 0.00 | 0.0 | 0.00 | 0.0 | |Turbulence | 0.00 | 0.2 | 0.00 | 0.0 | |3D Morphology | 0.00 | 0.0 | 0.00 | 0.0 | |---------------------------------------------|-----------------------| |Wait (dd module) | 0.00 | 0.0 | 0.00 | 0.0 | |Wait (ext. modules) | 0.00 | 0.0 | 0.00 | 0.0 | |---------------------------------------------------------------------| | Performance = CPU time / (TimeSteps*MMAX*NMAX*KMAX*LMAX) | | TimeSteps : 144 | | MMAX : 3 | | NMAX : 3 | | KMAX : 10 | | LMAX : 2 | | Performance : 0.12639E-04 [sec] | |---------------------------------------------------------------------| |Explanation: | | | |Initialization : Everything up to the first time step | |Simulation : All time steps | |Close and stop : Everything after the last time step | |Total : FLOW for this subdomain, | | excluding allocation/deallocation of global data | | | |Momentum eq. : Part of Simulation ("UZD") | |Continuity eq. : Part of Simulation ("SUD") | |Transport eq. : Part of Simulation ("DIFU") | | Only relevant when constituents are modelled. | |Turbulence : Part of Simulation ("TURCLO, TRATUR, TUR2D") | |3D Morphology : Part of Simulation ("EROSED, BOTT3D") | | Only relevant when sediments are modelled. | |Wait (dd) : Part of Initialization, Simulation and Closing. | | ("NXTSTP, NXTDRY") | | Only relevant when DomainDecomposition is used. | | Communication with and execution of the "mappers". | | Mappers are separate threads, possibly in another | | executable, possibly on another node. They copy | | data from one subdomain to another. | | FLOWs must wait while the mappers are executing, | | mappers must wait while the FLOWs are executing. | |Wait (ext) : Part of Initialization, Simulation and Closing. | | ("SYNC, _TO_, _FROM_") | | Communication with and execution of all "external" | | modules: | | Online WAVES, Online WAQ, Online RTC, Fluid Mud. | | | |---------------------------------------------------------------------| ******************************************************************************** *** *** FINISHED Delft3D-FLOW *** runid : 1x1x36 *** date, time : 2015-12-11, 10:50:34 *** ******************************************************************************** *** MESSAGE Removing file: TMP_1x1x36.grd *** MESSAGE Removing file: TMP_1x1x36.bct ******************************************************************************** *** *** Deltares, FLOW2D3D Version 6.01.15.5640, Dec 10 2015, 16:00:23 *** built from : https://svn.oss.deltares.nl/repos/delft3d/branches/research/Deltares/20150421_33933_vs2013 *** *** runid : 1x1x36 *** date,time : 2015-12-11, 11:07:02 *** ******************************************************************************** *** MESSAGE Executable for 64-bits platform. *** MESSAGE Double precision computation using reals of kind 8 *** Start of User Defined Model description - - 10 layer waterbalance 1x1x36 m - Stagnant water - *** End of User Defined Model description *** MESSAGE Using UNESCO density formulation by default *** MESSAGE Momentum solver cyclic method is specified *** MESSAGE DRYFLP and DPSOPT both specified in MD-file. Using DPSOPT: MAX *** Start of waq parameters input Write waq output : Yes Start at time step : 0 Output every N time steps : 144 Stop at time step : 144 Aggregation (horizontal) : active only Aggregation (vertical) : 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 *** End of waq parameters input *** MESSAGE The communication file is written during the first time step only. Needed by WAQ. *** WARNING Latitude of your model is 0 degrees, model located at equator *** MESSAGE Removing old output file: trih-1x1x36.dat *** MESSAGE Removing old output file: trih-1x1x36.def *** MESSAGE Removing old output file: trim-1x1x36.dat *** MESSAGE Removing old output file: trim-1x1x36.def WAQ input written at itime 86400. Closure error: 0.000000E+00, 0.000000E+00( 36): Total[m3], Max.Rel.(segment) Maximum timestep: 877513.50 s in computational element: 1 . Maximum timestep whole simulation: 877513.50 *** WARNING The file tri-rst.1x1x36.20140102.000000 for restart already exists, written over *** Restart file written at 1440.0000 minutes after ITDATE *** Simulation finished ******************************************************* Performance timers: |---------------------------------------------------------------------| |Timer name | wall clock | CPU time | | |-----------------------|-----------------------| | | sec | % | sec | % | |---------------------------------------------------------------------| |Initialization | 0.26 | 15.9 | 0.08 | 23.8 | |Simulation | 1.35 | 82.5 | 0.25 | 76.2 | |Close and stop | 0.03 | 1.6 | 0.00 | 0.0 | | |------------- +|----- +|------------- +|----- +| |Total | 1.64 |100.0 | 0.33 |100.0 | |---------------------------------------------|-----------------------| |Momentum eq. | 0.01 | 0.9 | 0.03 | 9.5 | |Continuity eq. | 0.01 | 0.6 | 0.03 | 9.5 | |Transport eq. | 0.00 | 0.0 | 0.00 | 0.0 | |Turbulence | 0.01 | 0.4 | 0.02 | 4.8 | |3D Morphology | 0.00 | 0.0 | 0.00 | 0.0 | |---------------------------------------------|-----------------------| |Wait (dd module) | 0.00 | 0.0 | 0.00 | 0.0 | |Wait (ext. modules) | 0.00 | 0.0 | 0.00 | 0.0 | |---------------------------------------------------------------------| | Performance = CPU time / (TimeSteps*MMAX*NMAX*KMAX*LMAX) | | TimeSteps : 144 | | MMAX : 3 | | NMAX : 3 | | KMAX : 10 | | LMAX : 2 | | Performance : 0.12639E-04 [sec] | |---------------------------------------------------------------------| |Explanation: | | | |Initialization : Everything up to the first time step | |Simulation : All time steps | |Close and stop : Everything after the last time step | |Total : FLOW for this subdomain, | | excluding allocation/deallocation of global data | | | |Momentum eq. : Part of Simulation ("UZD") | |Continuity eq. : Part of Simulation ("SUD") | |Transport eq. : Part of Simulation ("DIFU") | | Only relevant when constituents are modelled. | |Turbulence : Part of Simulation ("TURCLO, TRATUR, TUR2D") | |3D Morphology : Part of Simulation ("EROSED, BOTT3D") | | Only relevant when sediments are modelled. | |Wait (dd) : Part of Initialization, Simulation and Closing. | | ("NXTSTP, NXTDRY") | | Only relevant when DomainDecomposition is used. | | Communication with and execution of the "mappers". | | Mappers are separate threads, possibly in another | | executable, possibly on another node. They copy | | data from one subdomain to another. | | FLOWs must wait while the mappers are executing, | | mappers must wait while the FLOWs are executing. | |Wait (ext) : Part of Initialization, Simulation and Closing. | | ("SYNC, _TO_, _FROM_") | | Communication with and execution of all "external" | | modules: | | Online WAVES, Online WAQ, Online RTC, Fluid Mud. | | | |---------------------------------------------------------------------| ******************************************************************************** *** *** FINISHED Delft3D-FLOW *** runid : 1x1x36 *** date, time : 2015-12-11, 11:07:04 *** ******************************************************************************** *** MESSAGE Removing file: TMP_1x1x36.grd *** MESSAGE Removing file: TMP_1x1x36.bct ******************************************************************************** *** *** Deltares, FLOW2D3D Version 6.01.15.5640, Dec 10 2015, 16:00:23 *** built from : https://svn.oss.deltares.nl/repos/delft3d/branches/research/Deltares/20150421_33933_vs2013 *** *** runid : 1x1x36 *** date,time : 2015-12-11, 11:07:49 *** ******************************************************************************** *** MESSAGE Executable for 64-bits platform. *** MESSAGE Double precision computation using reals of kind 8 *** Start of User Defined Model description - - 10 layer waterbalance 1x1x36 m - Residence time 10 days - *** End of User Defined Model description *** MESSAGE Using UNESCO density formulation by default *** MESSAGE Momentum solver cyclic method is specified *** MESSAGE DRYFLP and DPSOPT both specified in MD-file. Using DPSOPT: MAX *** Start of waq parameters input Write waq output : Yes Start at time step : 0 Output every N time steps : 144 Stop at time step : 144 Aggregation (horizontal) : active only Aggregation (vertical) : 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 *** End of waq parameters input *** MESSAGE The communication file is written during the first time step only. Needed by WAQ. *** WARNING Latitude of your model is 0 degrees, model located at equator *** MESSAGE Removing old output file: trih-1x1x36.dat *** MESSAGE Removing old output file: trih-1x1x36.def *** MESSAGE Removing old output file: trim-1x1x36.dat *** MESSAGE Removing old output file: trim-1x1x36.def WAQ input written at itime 86400. Closure error: 0.000000E+00, 0.000000E+00( 36): Total[m3], Max.Rel.(segment) Maximum timestep: 877513.50 s in computational element: 1 . Maximum timestep whole simulation: 877513.50 *** WARNING The file tri-rst.1x1x36.20140102.000000 for restart already exists, written over *** Restart file written at 1440.0000 minutes after ITDATE *** Simulation finished ******************************************************* Performance timers: |---------------------------------------------------------------------| |Timer name | wall clock | CPU time | | |-----------------------|-----------------------| | | sec | % | sec | % | |---------------------------------------------------------------------| |Initialization | 0.21 | 15.3 | 0.09 | 23.1 | |Simulation | 1.17 | 83.6 | 0.31 | 76.9 | |Close and stop | 0.02 | 1.1 | 0.00 | 0.0 | | |------------- +|----- +|------------- +|----- +| |Total | 1.40 |100.0 | 0.41 |100.0 | |---------------------------------------------|-----------------------| |Momentum eq. | 0.01 | 0.7 | 0.00 | 0.0 | |Continuity eq. | 0.01 | 0.8 | 0.03 | 7.7 | |Transport eq. | 0.00 | 0.0 | 0.00 | 0.0 | |Turbulence | 0.00 | 0.4 | 0.02 | 3.8 | |3D Morphology | 0.00 | 0.0 | 0.00 | 0.0 | |---------------------------------------------|-----------------------| |Wait (dd module) | 0.00 | 0.0 | 0.00 | 0.0 | |Wait (ext. modules) | 0.00 | 0.0 | 0.00 | 0.0 | |---------------------------------------------------------------------| | Performance = CPU time / (TimeSteps*MMAX*NMAX*KMAX*LMAX) | | TimeSteps : 144 | | MMAX : 3 | | NMAX : 3 | | KMAX : 10 | | LMAX : 2 | | Performance : 0.15648E-04 [sec] | |---------------------------------------------------------------------| |Explanation: | | | |Initialization : Everything up to the first time step | |Simulation : All time steps | |Close and stop : Everything after the last time step | |Total : FLOW for this subdomain, | | excluding allocation/deallocation of global data | | | |Momentum eq. : Part of Simulation ("UZD") | |Continuity eq. : Part of Simulation ("SUD") | |Transport eq. : Part of Simulation ("DIFU") | | Only relevant when constituents are modelled. | |Turbulence : Part of Simulation ("TURCLO, TRATUR, TUR2D") | |3D Morphology : Part of Simulation ("EROSED, BOTT3D") | | Only relevant when sediments are modelled. | |Wait (dd) : Part of Initialization, Simulation and Closing. | | ("NXTSTP, NXTDRY") | | Only relevant when DomainDecomposition is used. | | Communication with and execution of the "mappers". | | Mappers are separate threads, possibly in another | | executable, possibly on another node. They copy | | data from one subdomain to another. | | FLOWs must wait while the mappers are executing, | | mappers must wait while the FLOWs are executing. | |Wait (ext) : Part of Initialization, Simulation and Closing. | | ("SYNC, _TO_, _FROM_") | | Communication with and execution of all "external" | | modules: | | Online WAVES, Online WAQ, Online RTC, Fluid Mud. | | | |---------------------------------------------------------------------| ******************************************************************************** *** *** FINISHED Delft3D-FLOW *** runid : 1x1x36 *** date, time : 2015-12-11, 11:07:50 *** ******************************************************************************** *** MESSAGE Removing file: TMP_1x1x36.grd *** MESSAGE Removing file: TMP_1x1x36.bct