[SedimentFileInformation]
   FileCreatedBy    = Delft3D-FLOW-GUI, Version: 3.1804
   FileCreationDate = 19-12-2003,  8:50:45
   FileVersion      = 02.00
[SedimentOverall]
   Cref     =  300.0          [kg/m3 ] = CSoil Reference density for hindered settling calculations
   IopSus   = 0               [  -   ] 1: Suspended sediment size is calculated dependent hydrodynamic conditions and d50
   #BsSkin = true
   #KsSilt = 0.001
   #KsSand = 0.001
   Falflc   = true
   FlcNf    = 2.15
   FlcK2    = 1.
   FlcK3    = 5.
   FlcK4    =  .0070
   FlcD0    = 10.e-06
   FlcD     = 0.44
   FlWsmin  = 0.3e-3
   #EroSchel = true
   #EroSns   = 0.
   #EroScv   = 3.e-9
   #EroScu   = 400.
   #EroSd50  = 20.e-6
   #cons_mud = true
   #cons_kk  = 2.0e-14
   #cons_ksig= 2.0e8
   #cons_eta = 1.0e7
   #bingham     = true
   #bin_cvisco  = 1.0e-3
   #bin_cnvisco = 4.0
   #bin_cyield  = 5.0e8
   #bin_abingh  = 0.02
   #ero_intfc   = true
   #conc_intfc  = 25.0
[Sediment]
   Name   = #sediment coh#  [  -   ] Name as specified in NamC in md-file
   SedTyp = mud             [  -   ] Must be "sand" or "mud"
   Rhosol = 2650.0
   Salmax =   37.000
   WS0    =    0.0050
   WSM    =    0.0050
   TcrSed = 1000.0
   TcrEro =    0.4
   Eropar =    0.0001
   TcdUni =    0.1             [N/m2]    :TCDUNI, critical bed shear stress for sedimentation
   TceUni =    1.0             [N/m2]    :TCEUNI, critical bed shear stress for erosion
   EroUni =    1.0e-5          [kg/m2/s] :EROUNI, sediment erosion rate
   CDryB  =  500.0             [kg/m3 ] Dry bed density
   SdBUni =   25.0             [kg/m2]   :SDBUNI, initial sediment mass at bed per unit area
   FacDSS =    1.0             [  -   ] FacDss * SedDia = Initial suspended sediment diameter. range [0.6 - 1.0]